iPad Pro 9.7 Battery Replacement

[@rolandosterwalder7884]

Von allen Erklärungen zum Akkuwechsel die einzige Verständliche und Ehrliche vielen Dank

[@DIYGeardo]

Thank You

[@climarathorn]

A nice word of warning, depending on what brand of battery you purchase, the logic-board connector can be super-brittle and snap off from the small PCB it is a part of if proper care isn't taken.

[@tamirble2]

Is it possible to skip the heating part and just remove the adhesive with the tool?

[@DIYGeardo]

Yes possible, but be gentle

[@Mdxmdx]

I have the same heating pad. Do you use the tablet function? How long has to heat? Thanks

[@DIYGeardo]

Start with 60c for about 1 minute and then use as you need with 30 seconds intervals. Different tablets need different timing.

[@zahriatan1946]

Yours is the easiest instruction to follow. Lucky for me the screen is already lifted up probably by poor glueing by a previous third party repairman. The battery he replaced with lasted for about 6 months. The battery was totally conked and I was hoping it was really the battery and not something else. So I bought a battery online for just US12 equivalent on offer compared to what I was charged for the previous replacement which was almost US100. Worst comes to worst it’s below 20 bucks wasted. Anyway looking at your video while doing the battery replacement it went smoothly. However I lacked proper equipment just used whatever was available including a Starbucks membership card. The screws are really tiny and I lost a few lodged in the tablet itself as I was using a 24 year old screwdriver given by a nice man at the specs shop long ago. Only after losing a few I got this bright moment of inspiration to wet the screwdriver tip and the screws stick luckily. Anyway I was prepared to consign this tablet as a paperweight and didn’t bother about the lodged screws. The screen turned on fine but there was a bit of a regularly alternating shadows on one side in a line about 0.4cm wide. The battery looks good in fact better than the one before. The shadows hardly noticeable after a while. Thanks to you, I have my iPad Pro back when I was ready to let it go and in fact have bought a Chinese android tablet. Playing Candy Crush is a breeze on my iPad Pro but so frustrating on my cheap android as do other apps.

[@DIYGeardo]

Great you got it fixed..Nowadays it is quite frustrating that needs too many tools to repair a broken device.. but try to keep b7000 glue, it is handy when you are closing devices back..

[@danishfisch6234]

I used my moms old supermarket card to pry the battery 😭

[@edlynntb547]

I have this exact model and the battery is definitely on its way out. Perfect instructions thank you!

[@DIYGeardo]

Glad it helped

[@antoniopalmero4063]

Nice , thanks . I’m doing my 9.7 pro tomorrow as it keeps shutting down and has poor battery performance .

[@DIYGeardo]

Great..

[@antoniopalmero4063]

@@DIYGeardo Replaced my battery now 9.7 pro , all ok apart from loss of Touch ID.

[@TheRomandiesel]

explained very well and in detail. Replacing the battery worked with these instructions. It just cost me 29 euros. Perfect! Thank you very much

[@DIYGeardo]

Great 👍

[@EleventhHour.]

Help . Everything well well but the iPad is not charging . What can I do?

[@DIYGeardo]

Have you secure the board and battery properly? If all good maybe an issue with the replacement battery.

[@melodygracedevera7789]

Very helpful video. Just a question, was able to replace the battery but still won’t turn on but I feel the board getting hot when I tried powering on the device. What to do?

[@DIYGeardo]

it can be few things, - bad replacement battery, Power adapter or cable issue (make sure your wall adapter is iPad Compatible), or an issue with a board IC..To start check the first two things

[@poolpeople978s6]

They fried the mother board in This video

[@Al-ok1lj]

Apple must’ve invested in the best glue in the world because it was such a pain getting that battery off even heated up. Great tutorial btw! I was about to give up with the battery connector, but patience was definitely needed here.

[@DIYGeardo]

Yes need lots of patience..

[@geromebelen695]

Hi! Good day! May I know how to distinguish if the ipad pro 9.7 batt is legit? Or not? Can you give me some tips of brand do you prefer? And why? Thankyousooomuch i hope you notice my comment. I am a new subscriber. ❣

[@DIYGeardo]

Well it is quite difficult to say which is original and which is not..Because Apple don't sell batteries..But there are good OEM brands, which have a good track record and they are almost original quality. And also they don't want to sell batteries with lower quality to ruin their brand..Send me your country so i can tell you some brands..

[@shawn3751]

Do you have a suggested brand in the US

[@ginnieporter641]

Yes in usa please

[@ccavatai]

I changed out the battery as instructed and the power seems to work fine now but some of the number buttons on the screen don’t work now what should I do? It seems to be on one side of the screen.

[@DIYGeardo]

Check your connections, but I feels like a faulty screen

[@محمدعادل-ط9ظ9ف]

The best explanation 👌 👏

[@DIYGeardo]

Glad you liked it

[@Kane508]

Hello. Nice tutorial by the way. I have an issue with my screen. After replacing the battery, the screen won't turn on. I can hear the sounds like when the charging cable is connected and typing by the touching the screen. Ive connected the 3 connectors to the screen several times thinking there's a loose connection. I tried resetting the ipad and no luck. Any suggestions?

[@DIYGeardo]

Emm, how about trying a hard reset via buttons, if not you need to try with a new screen.

[@Kane508]

@@DIYGeardo I tried doing a hard reset and nothing. I don't have a new screen.

[@DIYGeardo]

@@Kane508 well that is the easiest option to test the screen ..

[@Kane508]

@@DIYGeardo I took it to the shop and they said the board was fried.

[@hamethorlandopropertiesand4276]

I its giving me a black screen, it sounds when i plug in the charger but no screen. What can i do ? Please tell me

[@DIYGeardo]

>Press and quickly release the Volume Up button. > Press and quickly release the Volume Down button. > Then press and hold the Power button until the device restarts. If not you need to test with a new screen to see the issue.

[@hamethorlandopropertiesand4276]

@@DIYGeardo thanks i tried this but didnt work. So i disassembly everything, including the battery, and plug everything back again and it turned on.! God bless you

[@DIYGeardo]

@@hamethorlandopropertiesand4276 Glad that worked..have you done a repair before ?

[@hamdinahar5096]

Excellent thank you

[@DIYGeardo]

Thanks for your feedback 🙏✅

[@corneliustitus1774]

Hey. Pls answer. I’m so scared to replace the battery since the ipad is kinda tight. Is it safe tho? I just need some encouragement 😭. I need to change my battery since mine is 77%

[@DIYGeardo]

Well it is possible. Need good patience

[@corneliustitus1774]

@@DIYGeardo I’ll try it today or next week. Opening the screen is the most tricky part. Since i only use hair dryer

[@corneliustitus1774]

I had to order the glue too. Lol. I’m afraid it doesn’t stick together

[@DIYGeardo]

@@corneliustitus1774 well b7000/t7000 will work

[@corneliustitus1774]

@@DIYGeardo hey. Sorry.i cant see clearly. You dont have to remove the silver shiny edge right? Only the screen? I thought that’s the part we had to remove

[@methus9812]

The design flaw here is that when the iPad is not fully turned off, there’s a high chance that you might fry the screen as you cannot easily disconnect the battery before removing the screen. I hope i’ll be able to keep it fully functional after trying this

[@DIYGeardo]

Thanks for your feedback...

[@mehmetkilickan]

Bak bunu cok swvdim

[@DIYGeardo]

Thanks 🙏

[@MysticBeautyAlabama]

Unfortunately i broke my lcd when replacing the battery😭😭😭 i guess i went too deep when trying to get the glue from the screen. Battery works great though.

[@DIYGeardo]

Yep, have to very careful with the screen

[@etoborik]

Thanks a lot,, I just finished replace my battery 😎

[@DIYGeardo]

Nice work!

[@etoborik]

@@DIYGeardo thanks but I’m buying unbranded battery and it’s been 3 days now after replacing the battery ,, but still, the battery drain faster. when using my iPad like one hour more than %40😅.

[@DIYGeardo]

@@etoborik where is your location..

[@etoborik]

@@DIYGeardo US

[@DIYGeardo]

@@etoborik there are good battery brands , you should have tried those.. sometimes cheap ones not that good.. because it misses the actual capacity and the quality ..

[@tashbritishlife2434]

The thing is apple can finish iOS support on iPad Pro first generation…

[@DIYGeardo]

😎

[@onecalledchuck1664]

There should be consumer protection laws requiring them to support the device for 10 years. Just security updates and either let us sideload apps or fix their bloody store so I only see compatible apps even if they're outdated.

[@yirmi5]

This device opened before. Normally it's not that easy to remove battery, screen, and shield.

[@DIYGeardo]

Thanks for your feedback. We have shortened the video on those steps. Well, it takes time, but proper heating and tools will reduce the time. Next time, we will try to display more. You can try this video too - kzbin.info/www/bejne/iWe2ZqOar96FrdE

[@ささきささき-z3u]

簡単に作業してますが素人の電池交換はガラスを割ってしまいます。電源が入らなくてもiPad Pro 9.7 はガラスを割らなければ現在ヤフオクで5000円以上で売れています。業者に電池交換を頼むと15000円かかるそうです。ガラスを割るとほとんど価値が無くなります。

[@DIYGeardo]

Thanks for your feedback

[@corneliustitus1774]

Now i broke my smart connector plug. Tried to connect it with the battery but didn’t make it. Took me 20 mins and then the smart connector plug decided to break😅. I guess it’s better to buy brand new ipad

[@DIYGeardo]

Emm that’s bad.. well you can replace that piece..it is not that hard..

[@corneliustitus1774]

@@DIYGeardo my screen is distorted 😂 i think because of the heat

[@seccat]

The video should be titled "How to replace your Battery and the motherboard after you fry it."

[@DIYGeardo]

😎

[@Al-ok1lj]

Why?

[@AB-bo9rp]

​I did exactly the same ....Got the screen check OK .Then disconnected and secured the last battery connection and shield and reconnected the screen and .....nothing completely dead😢! won't even take a charge . Before I close it up ,do You think the Motherboard is cooked? Is it even possible without messing about in the connections aside from following Your instruction?@@DIYGeardo

[@טורפרנקה]

Haha

[@متجرالتطبيقات-و4ل]

الله

[@DIYGeardo]

Thanks

[@PATCsawyer]

Fail.

[@DIYGeardo]

Thanks for your feedback

[@jimrooney1]

When heating and taking apart, something happened to the digitizer like part of it got stuck in the adhesive and held the whole thing together on the "opening" side and then tore to the wires thereby ruining the digitizer. Your instructions didn't warn about this happening so I'm very disappointed in you. Now I have to buy a digitizer.

[@wingers-ny3lk]

Instaed of blaming someone else try blaming yourself for your lack of knowledge in repairing something that you know nothing about, he is just trying to help people and you are blaming him for you damaging your ipad, next time take it to a professional if you are unsure of what you are doing.

[@Al-ok1lj]

I did a crappy job on my iPad mini 1 battery replacement back in the day. I followed all the tutorials out there but ultimately it was my fault. Over the years, I’ve gotten better at repairing my devices. Don’t blame this guy. Take it as a learning lesson and better yourself.