IPHONE 6 Tristar IC Replacement

[@shahzadrana9883]

Excellent ! always like to see your updated videos .

[@marcoprogramas]

hi, Great videos, could you tell us what kind of solder paste are you using when removing ic and where to order it. Regards

[@Morticor80]

In an other video he has shown us that he is using Mechanic MCN-UV80 Flux Paste

[@MandangoGC]

Top man, looks like so easy like in all your videos, but really is your skill. I have a iPhone 5 than response like charging when connect it (thunder icon, turning on, etc.), but really is not charging, could be also the U2? Or you recommend me to check before another component?

[@DEEPFIX]

facebook.com/ashfaqcells/posts/947221075301148 Come to this page so that I can answer u

[@MandangoGC]

DEEP FIX I haven't facebook ^^

[@rachidlyamani]

you must check with an empty battery (0 volt)to be sure if the new ic work good

[@axyliatos]

hi, I have 3 little questions... 1. Should we add flux before installing the new one ? 2. Shall we worry not to overheat the new one ? 3. how can we be sure that all 36 pins are connected ?

[@thesmartguy3523]

i'd suggest you read books on soldering - check out this site www.b-ok.cc

[@sumitandy]

hello bro which paste on solder time ..and what temp u set for Hot Air

[@1stcellfonerepair]

Hi Deep Fix, Thank you for the video. I have been having issue with iphone 6 water damage phones. After water treatment service, many iphone 6 can't power on or can't charge either. It happens frequent. Is there a particular IC that is burnt and cause such issue or the board is bad? thanks

[@PCTweaks]

Hi, What kind of material is this u2 chip made of? I don't have a hot air station so trying to find out whether it's possible to replace the chip with a Soldiering Iron? Will it melt? Please let me know,

[@nitin99k99]

Nice work! where can I get the replacement IC components?

[@KangParkSoon]

hello~ also I'm wondering about this this video running time 2:42. you use glue and adhesive? flux right?

[@saleswongs5825]

great video I've tried 4 new batteries and iphone 6 charges and works with new battery but as soon as battery goes down to 0% it would not charge again. I guess I need to change this chip right ?

[@emwiem2211]

Yes

[@larbikamla8541]

Hi, I have a question if the U2 ic in the Iphone 6 is the same withe the U2 ic in Iphone 5 or 5S?

[@DEEPFIX]

Its same in 5s but some times it doesn't mach

[@abunasiru8967]

It's nice keep it up. But Pls how do I get those Ics am an engineer and am finding it difficult to get the ics

[@abunasiru8967]

Nice work it's a neat. But please how do I get those Ics

[@therealvizi0n]

Hi! Is it possible to know the correct orientation for the new chip? When I removed the glue from the old one, I was left with a mirror chip that had no marks. Thank you!

[@Tyranosaurus_Xer]

vizi0n simply google image to see correct orientation

[@АлексейИванович-д3т]

Hello. What temperature you use for damages ic?

[@noregretzYT]

so all he did was clean it or replaced that little thing? where do you get that little chip that he replaced??

[@gutierrezgutirrez7778]

Hola amigo me puedes decir donde lo compraste el circuito integrado yo soy de México tengo iPad mini con iCloud

[@okadajiiko8773]

What iron tip do you use? how does it call?

[@Logangames98]

Don't waste money on buying a new charging port or battery if your phone won't turn on I replaced both to no avail it will 100% be charging ic that's the fault caused by overcharging say overnight using aftermarket charging cables I had mine repaired at a cost of £35 hope this helps ;)

[@eduardojoseflores8742]

brother do,you recommed to replace a new u2 ic? you do not?

[@mrgsm2003]

how you easily remove glued ic? what is the big soldering tip to remove it? please info

[@Reprogram4595]

How do i know the orientation that the ic go as it dont have any letters on top not a mark or point neither under

[@mrsemifixit]

Do you know the difference between u1700 (u2 Tristar) u1401 and q1403? Know their functions?

[@ymd2068]

Good Deep Fix: The first want to thank you for the information you provide to the public and that's why I subscribed to your channel. I need a favor, if I can have diagrams facilitate schemes Iphone base plate from the 4th to the 6S if not too much to ask or tell me atleast some link where can download or something And another question. I have seen that have courses in repair, wanted to know if you have cases 5 and 6 iphones. You could give me more information about this? the as they go and how I can make? It is a pleasure! Thank you very much Deep Fix

[@mrimdadafghan786786]

ماشاءالله ډېر زیات ښکلی دکیمرې رېزلټ لږ سم کړه چې صفا مالوم سې

[@berki681]

Great Job,thanks for uploading !!!

[@DEEPFIX]

Thank you

[@MrPieknylolo]

Hey man. Would it help for blinking red screen in iPhone 6 plus? I have one which doesn't turn on and only red screen is blinking.

[@ayoody1420]

السلام عليكم ورحمة الله وبركاته اخوي انا لو فيكت الايفون ورجعت ركبته لو ضيعت اماكن المسامير او بدلت هل يتلف الجهاز كامل ؟؟

[@jorgepina8858]

i mate, i have one question, i have one iphone 6 and he only charge from one side, if i change that ic it fixed?? Thanks

[@DEEPFIX]

Change it

[@protonspeed]

have you ever lost any pads using this chip removal technique ?

[@hoahongnguyen8379]

Hello. Can i ask you the reason why my iphone6 wont start? When i connect the charger and push the power botton the phone get hot/warm but dont start up. thank you

[@felipecaetano6628]

Deep fix what you used to removed the CI?

[@alen91071]

did you do this without microscope?

[@generluna5456]

Hello DF. I have an iphone 6 no charge and doesn't turn on . But i put in on dfu mode and itunes recognizes the device. But no restore. What do you think can be the problem???

[@DEEPFIX]

It might be the issue of u2

[@generluna5456]

Thanks I will check

[@irshadkhd]

iPhone 6 & plus U2 ic same....?

[@Juninhobass211]

Hello , I have an iphone 6 this loading, however takes a long time to load and unload very fast , already changed the dock and changed the battery, continued to give the same defect , it will be that if I subistituir the U2ic resouve my problem ?

[@harif5865]

I have an iphone 6 no charge and doesn't turn on . But i put in on dfu mode and itunes recognizes the device. But no restoring, What do you think can be the problem

[@victorpeter8925]

Temperature and air flow???

[@cityhunter087]

380c, airflow : 3

[@joaquincousin3929]

Hi I have an iphone 6, the device no charger and no power . Amper consumption is 0.006 . Can you give me an idea of what is the cause?

[@phonesmrcs7080]

can i use a super glue on the top of u2 ic to remove this u2 in the same way?

[@moathmdk1769]

Ashfaq iam in kuwait and ineed your shop adrees

[@mehditouati86]

please what is the name of this stuff that you use to fix motherboard, every time im trying to fix motherboard it start to move. thx

[@annaaliaya]

how do i know if i need to replace the U2 chip or the pc chip? the phone wont charge but when i connected a fully charged battery it came on but didnt go beyond the Apple logo. thanks

[@dylanvanderzee3732]

Hello DF, do you reball the new IC?

[@Tyranosaurus_Xer]

Dylan van der Zee new ICs come with new solder ball, you dont need to make solder ball on new ic, all you need is make sure the board surface is perfectly flat, no old solder ball, no glue, nothing on the board trace

[@hessaali8295]

Will this effect the data in the phone? Thanks.

[@Tyranosaurus_Xer]

HH HH not affect the data

[@stephenthegoat4625]

I wonder what will happen if the power ic breaks down? Because my iphone se cant charge(remain1% all the time)and I think that may be the cause.

[@DEEPFIX]

+junlin chan I think your phone battery is dead

[@stephenthegoat4625]

+DEEP FIX Not a problem right now, it was perfectly fixed yesterday Thx!

[@DEEPFIX]

+junlin chan great 👍

[@mohamadothman2384]

What iron tip do you use? Can you tell me plz or send me one foto becuse i nedd this

[@mehditouati86]

excuse me, how to mesure the Charging IC with the multimeter? thx

[@MuhammadOwaisKhan83]

Assalam u Alaikum. brother I have 1 iPhone 4s but WiFi is greyout. means wifi on off not work. please if u have any solution......?

[@AlexPerez-km5pj]

Hi, i need some help! i changed the screen on my iphone and now it doesnt turn on, no charging, just no response. i did check all the ribbons and nothing still... i think its a short? Can it be this problem?

[@subornamustafa6926]

pagol

[@subornamustafa6926]

sry vai

[@swapyworld09]

where can i get original iPhone or other branded mobile electronics components?

[@panaiotpanaiotov2154]

Добра работа! Браво!

[@Mradam912]

i didnt get what i saw on the power supply and i did not see any wire connect between phone and power supply can you explain to me plz. thanks anyway

[@sainulabid2455]

Adam Rassene 👍👍good

[@camurgo]

On the power supply, the number on the left is current (miliamps) and on the right voltage. If there was no current or if current was off that value it would have meant something was wrong. Higher would have meant short circuit somewhere/bad component, lower would have meant maybe that too but also a variety of other things.

[@zulkufkavartkurt4990]

Hi ashaf please write solder iron name you have remove ic.?

[@DEEPFIX]

Ok watch our next video, in that we will mention all that things Thank u

[@DEEPFIX]

Ok watch our next video, in that we will mention all that things Thank u

[@Nexalith]

what name of gel/glue for install that ic/chip?

[@karengatchalian5282]

is it possible if we will use iphone 5c U2IC to replace my iphone 6's U2IC?

[@DEEPFIX]

+Karen Gatchalian some times it could work but there are complication so its better to change it's on

[@DEEPFIX]

+Karen Gatchalian some times it could work but there are complication so its better to change it's on

[@jotogar2]

What is the temperature that you working for sorder ? Thanks

[@danjohnson9230]

And what about Airflow???

[@DEEPFIX]

+Dan Johnson 390c with Quick 857d and air zero

[@RB-pc7tg]

Airflow is going to change depending on the component your working and what's around or undernieth it. Caps, diodes, resistors, inductors, fets, small glass ic can handle 50% or more air speed. Bigger underfilled is packages is going to be less like 10-20% (temp will be less too). Now this is just a guideline answer. This is a place to start and then make adjustments based off of your air station and what works for you.

[@DEEPFIX]

+RB we use zero air with our setup

[@OceaniPhonerepairSanFrancisco]

Maybe you can help me. I received a dead 6s, no water damage. I installed a new battery and it powered on but battery drained about 1-2% per minute and would not charge. I replaced tristar and phone charges now and battery drains normally, but it only charges on a wall plug. When I plug to a computer iTunes does not recognize the phone and it won't charge. Plug back to the wall plug and it charges fine. I also tried a new charge port but same. Any idea what might be the cause?

[@sahebchhipa]

u have to change usb charge ic too,its diff,

[@Thegoodpal]

smart job ... thank you... keep it up

[@ChicagoMedicineMan]

Your amazing, Do you train? Can I send you some phones to fix?

[@salambarcelona]

what is that you use to remove ic? thx

[@cneg]

hello my dear friend i got a quastion i try to change the display from my iphone 6 and when i put the new display i demage the logicboard with the screw and know it dosent work pleas help me out thank you

[@NikyRipy]

you are the best

[@rockzbeast8400]

Hi DF. my iPhone 6+ gets switched when I take it off form charging and when I plug it,it comes back

[@thesmartguy3523]

The tristar ic is gone

[@imranbhatti5624]

assalamualaikum. your solder?

[@Yassinerider]

Plz this IC for iphone 6 is 1610A1 or 1610A2 or 1610A3 ?

[@luizalexandre8701]

I'm from Brazil , where I can buy this component, a site that can tell me ?

[@sainulabid2455]

Luiz Alexandre amazon ,alibaba. ic serial (1610A2)

[@ing.dominiknemeth1643]

can you describe How it works?

[@keval706]

Is IC replacement safe?

[@KG-Handy-Store]

at how many degrees you do it??

[@DEEPFIX]

Ok watch our next video, in that we will mention all that things Thank u

[@arun1430076]

Hi, my iphone 6s battery is not charging. Charging symbol appears but not charging beyond 4%. I have tried changing to a fully charged battery. But still shows 4%. And it keeps restarting after few mins. Tried hard reset and dfu mode. Is that charging ic problem?

[@wahabiqbal7384]

Arun Prabha change ur iphone charging jack it will 100%work

[@ebelectronics]

hello, I have an iphone 6 fell into the water that does not turn on, what can I do? I removed all the oxide from the motherboard. the screen remains black please help me

[@ahlamalzubair4863]

i have iphone6 my scren some time stuck and i cant movet can the ic be the resen for my proplem???

[@baseemb]

Alslam alykom .. iphone 6 searching, no modem firmware .. After change charge ic .. Plz

[@jofix3455]

I tried to replace u2 ic and rehot u1401 ic and after that phone is completely dead, no sigh of life, iTunes does not recognize the phone. What i did wrong? Can you help me please?

[@netdudeuk]

Great video thanks

[@DEEPFIX]

Thanks

[@jabbarinfomedia6134]

what solder brand?

[@tuttorobi1]

Ciao mi daresti il link per acquistare la scheda completa del tristar per iPhone 6s grazie perché non ho attrezzatura per sostituire integrato .

[@arikate1134]

hello DF , i have iphone 6 lock icloud ,, if you could help me for my unlock icloud for iphone 6 can be normal again ?

[@DEEPFIX]

+ari kate yes we can but right now some complecaction in it so after 1 week

[@DEEPFIX]

+ari kate yes we can but right now some complecaction in it so after 1 week

[@harishnair5060]

+DEEP FIX DF..I have an HTC one m8 with a dead IC..can u please tell me what IC it is since it's very difficult to find ?

[@احمدالشهري-ض7ب7ذ]

السلام عليكم where do you work ? .Do you live in Saudi Arabia?

[@موسىيحيىمنصور]

احمد الشهري احجي عربي

[@greattechinfo.5450]

please give me solution What is solve this problem after change battery ? give me ans

[@rootsdat]

home lock screen standby 95% battery drain overnight?? any solution to this im on 9.2 software. thank you.

[@IhackUppl]

Same probleme. Did you fixed it?? How?

[@almasadir1761]

hi sir please share with us your tools and flux also ohh paji urdu mai bola karo kuch theek sya samjh aayeh hahah pathan zinda bad sangay khana .....

[@VladKievsky28]

Really COOL!!!!

[@israelgallegos1768]

hello good night have two problems the failure of two iphones arrest them when they go to itunes, and load them with sw but even still failure , you help me please

[@hamed27749]

ستمر يابطل ولله انك فنان

[@michaelbaez9290]

by fovor you can sub headline in Spanish would be a real gratitude for your faithful followers.

[@djthekillerking246]

My Iphone does not want to charge from wall outlet but charges through laptop usb port help

[@josemjaca]

Temperature and air flow?

[@DEEPFIX]

Ok watch our next video, in that we will mention all that things Thank u

[@computerall1203]

Good job

[@AngelGonzalez-yu2zs]

tengo un iphone 6 con icloud en donde puedo conseguir los chips? o cual es su nombre??

[@soawn29]

My iphone 6 is dead by falling on floar... i send it to service in my town thay sad that motherboard is alive but phone dont work so thay need to find what is dead on motherboard so can somebody tell me is it expensive to fix that? And is that chip in video expensive?

[@tomasmendez8791]

whats the u2 IC ?

[@751messi9]

Broo my i phone 6 have a charging problm i give someone to fix he try but he failed to fix he make more prb now my phone stuck the apple sign when i swicth on my phone sooo plz give me some advise how can i fix my phone plzzz

[@Logangames98]

Also if your phone shows no signs of life lcd no display etc but still recognised by iTunes the other repair needed will be display ic repair this would be £35 also ;)

[@shopcelassistenciaeatacado6744]

Iphone 6 turning off with charge whats repair ? please.

[@309kimtaeyeon]

Hi, my iphone has an issue where it gets hot when I charge my phone, download an application and using an application. It also drains my battery pretty fast. I can only use it for about 3-6 hours. Is this battery problem or IC problem? I have no problem connecting w the usb cable since it is charging and still works fine. It just gets heated and drained alot even when its on stand by.

[@venkateshvenky938]

nhamizahm 25 same problem

[@luismt]

Tengo un iPhone 6 en mi taller y le pongo a cargar y me dice cable no certificado y carga solo apagado

[@Yoquese_12]

+luis martinez compra un cable original y ya esta bro

[@Salman_Makki]

Thanks man