iPhone 7+ No Power After using 3rd Party Charger Short on VDD main

[@Bimmedroid]

Quite normal that the Gate is getting hot when u push 2 amps or more from the battery connector throught the gate to Vcc-main/VDD-main to ground. If u solder a wire to vdd main located on a cap far away from the gate, u should be able to detect your short using freeze spray quite good. Before I start picking up random caps, I would pull the gate and inject voltage there...

[@Microsoldering]

Thanks for the tip! I will try that next time.

[@donteallong2149]

with fix how long do you think the phone will last

[@zxrjimmy1]

Thanks, you just saved me a headache, same issue here

[@GaneshKumar-sn3kd]

I have a iphone 7 plus device gave for display replacement. While removing the screws, one of the screw came out from base of the logic board.

[@sevyrsgaming1202]

is there a question in there or just stating a fact?

[@F82_Eli]

I have an iPhone 7+ and it’s not showing no signs of life, every time I try to charge it, it just heats up.... I need some help

[@masoodpaki]

Will u fix my iPhone if I send you by post from Canada.

[@Microsoldering]

yes. www.microsoldering.com/request-a-quote/

[@GaneshKumar-sn3kd]

If u give me the mail ID I'll send u the picture