Gun Gripes Episode 3: "Revolver Etiquette"

[@t77snapshot]

When I first became interest in the gun community, I had very little knowledge on firearms. I began searching youtube videos for answers and my very first introduction of Barry was this one, "Revolver Etiquette" back in early 2012. His personality immediately made me an instant fan and I have been supporting you guys ever since. I have learned a lot from you Barry, and I'm sad to see you go. Rest in peace my friend, you will be missed by so many.

[@thewatcher611]

Was about to post the same exact comment. Thank you for allowing us to see Barry, even now. Thank you Iraqveteran8888

[@Sardine4189]

The first vid I ever saw was the top zombie weapons and kitchen gunsmith also back in 2012. Been a subscriber ever since and still love Barry to this day.

[@bassmangotdbluz3547]

Once in a while I revisit some of these old Gun Gripes Episodes with Barry. It's like hanging out with an old friend. RIP Mr.1911

[@jayklink851]

Same here. Barry was, one knowledgeable, character. I miss the guy!

[@pradohealey3000]

There's a little bit of Barry in every 1911 now.....legend Rest in Power King

[@realshaolinprince]

I learned more in 5 minutes here than I have ever being in any gun store!

[@ebblue81]

Shane's World same here!

[@MichaelWilliams-nu6lv]

Shane's World. // The retailer only cares about getting the gun out of the store . All it takes is to have five or less customers with only three or most of the time two employees and you are in a mess . Gun Stores that not have a " Range " are only interested in sales because the lack of the number of employees 🔫

[@BalrogUdun]

Shane's World amen

[@docjohnson3980]

It's sad that most gun stores employees are there just for a paycheck, and when asking them questions about a certain item it bothers them.

[@alecalfaras5936]

🙌😎

[@veteran35th]

RIP Barry. We've lost an encyclopedia with your passing.

[@backcheck31]

veteran35th Wait, what? Barry passed away??? When? Oh man! I'm so sorry to hear that.

[@liamfinch2839]

veteran35th i didnt no i liked him :'(

[@douchebag4255]

google is your best friend

[@rustyshackleford17]

He had a heart attack. But that happened after Moss Pawn fired him and Eric threw him under the bus for some legal troubles. Barry made the channel watchable. Eric's videos are about as watchable as a middleschooler showing off his airsoft collection.

[@gibsonusa2]

Meh...

[@kameronwatson2294]

Rest in peace Barry, i learned so much from you. You will be sorely missed by us all.

[@Only9mm]

my brother did that spin and slam shut cylinder on my colt python, he is no longer welcomed at my house

[@sibco96]

P Never let anyone smalm shit on anything you own. It's unsanitary.

[@Only9mm]

sibco96 haha, i meant Slam shut. good eye my friend!

[@sibco96]

P I know but I couldn't resist. 😀

[@mackenzieross1837]

Lol oh I would never talk to them again.

[@downfromthereeefters]

On a python to boot, damn that’s a shame.

[@paulthailing8206]

Love going back and watching some Old Gun Gripes with Barry! Classics........

[@thetobaccoguy1751]

Recently handed my brother in law a pristine S&W Model 29 .44 mag to look over. The first thing he does is spin the cylinder and flips it closed. I physically winched. Never again. What a ass.

[@mrgoodygoodygumdrop]

Oh my god, I just had to imagine that for a sec and it made me physically wince. That would be something my brother would do

[@selaxlife7621]

dude i jst showed my friend my brand new 686+ and hw did the same shit! fuck that pissed me off

[@thetobaccoguy1751]

oscar rodriguez Strictly guard your revolvers.

[@Sergei_Ivanovich_Mosin]

Never ever hand your revolver to someone before explaining to them that you do not fucking spin or slam the cylinder, I don't care if they're some former SEALs guy who owns five hundred guns and are rolling their eyes the whole time.

[@MrGhostEMC]

+Sergei Ivanovich Mosin I've had a friend do it THREE times after I told him not to. Now there is unsightly wear on the locking notches. People just don't understand revolvers I guess

[@krispewkreme4510]

Great tips to know! Just got my first revolver yesterday. This man has lots of knowledge. Since he can no longer share it, we gotta share what he gave us.

[@JoseMunoz-pb8qi]

6g5

[@reesex3882]

Barry was the reason why I subscribed this channel. Barry's death was a tremendous lost to both iraqveteran8888 and the Gun Community as a whole.

[@xBloodBoundx]

Holy crap, I never realized how big the .500 was. That thing is massive! haha

[@BSE1320]

I showed my employees at the pawn shop I work at this video, and this is how we handle our firearms. Thanks Barry. RIP.

[@helturflippad]

Witnessed another "spin & flick" problem at my local shooting range. This dude came down with a brand new 625 to show off at the weekly training workout. Spun & flicked and simultaneously held his thumb on the hammer, during the flicking part he accidently strained the hammer slightly. Result; He bent the "hand" and damaged one of the 6 points on the "cylinder star", and you could see the "cylinder notch" had a clear dent that was not on the other six cylinder notches. It had to go back to the retailer and sent back to Wischo germany (european retailer) and they in turn sent it to S&W US. He got it back 14 months later, but this time around he did not "spin & flick" it. Spinning and flicking a revolver amongst anyone knowing anything is probably the equivalent of waving a "dummie-flag". (And that is putting it mildly!)

[@rustyshackleford17]

I always forget how much of a nightmare that can be in Europe.

[@Grimessa100]

Man looking back at these videos makes me sad. RIP Barry.

[@hotscoffman111]

Rip barry...you were and still are a badass dude that anyone with an i.q. over room temperature Would love to have as a father or grandfather...much love to his family...he will be missed and my daughter will hopefully be watching these vids long after we are gone

[@claushellsing]

Barry . we miss you a lot :'(

[@weaponkid6656]

I think I took him for granted on the channel :(

[@jackbishop7693]

Damn I was wondering why I haven't seen him in any newer videos.... He was certainly my favorite guy from this channel. RIP old boy. Was it just heart disease/natural causes that took him?

[@Smirkku]

He committed suicide I think.

[@Smirkku]

Fuck you, he did.

[@GUNSHIPFLEX]

Smirking Smirkku he had a heart attack

[@AN71H3RO]

Coming back in 2020 cause I miss Barry and love revolvers. That man is a real legend.

[@budders9958]

The 500 magnum looks like it belongs in a circus.

[@chipngo9758]

It will get you right through the house to yours, into your fridge where you hiding Bozo.

[@richardespinoza6243]

Smith And Wesson 500 is no joke! It's a good handgun hunting gun. But if your hiking out in the wilderness in Bear Country it's good to have because it's the only thing that can protect you from a Bear.

[@joshuascreations7526]

It is comically large.

[@richardespinoza6243]

@@joshuascreations7526 that maybe so but it makes good use if your hiking in Bear Country or you want to put a Elk stake on the grill. This guy at the gun range had me set in a seat. He told me to hold still. He shoot to S&W 500 and it knock me out of the seat with the loud BOOMM!!!!😂😂😂😆 😆.

[@troy9477]

I spotted that beautiful nickel Model 10 right away. I worked in a shop from 93-95. I always advised customers to never do anything they had seen in Hollywood productions- the wrist flick, fanning single actions, spin cocking lever guns, etc. Sounds like the problem is worse now than it was then.

[@mariarusso1155]

Hi how are you doing 😊

[@troy9477]

@@mariarusso1155 Okay. Getting by, like everyone else. You?

[@mariarusso1155]

@@troy9477 I’m good thank you for writing me back.

[@LBstrikesagain]

I had no idea! I thought it was ok to spin the cylinder and flip it in. Thanks guys, I won't ever do that again. And i apologize for the times i have done that

[@marley1995]

Clown

[@josego6836]

​@@marley1995dude, he's learning and actually LISTENING. you are the clown here.

[@YouTubeCertified]

Barry was a good man. I wish I could’ve met him in person. Glad to have gleaned knowledge from him through this channel.

[@rpcdude]

For what it’s worth, Barry helped me out today. I got a 629-6 yesterday on a decent trade. While at the range I was having trouble opening the cylinder. After ironically coming across this video today, I learned the ejection rod my be lose. Sure as shit, it was lose. I tightened it and I’m good to go now. Rest In Peace, Barry.

[@wkeil1981]

Man that first revolver that was all shined up. That was boss

[@j777]

I think that it's nickel, not stainless. Awesome piece!

[@michaelbridges6058]

Rip Barry. We miss you you have a ton of knowledge and you are a good teacher . Thank s

[@TrevorBrass]

Thanks for the good advice! It's always good to hear stuff like this from people who actually know what they're talking about.

[@georgelong4888]

As a retired Pistolsmith I say...great advice !

[@swaficionado]

Small pointer: If you are handling a unloaded S&W then don't index it by hand because this creates/supports the infamous long scratches along the cylinder notches. Best thing to do is after closing the cylinder is to cock the hammer and releasing it softly, thus letting the mechanism of the revolver index itself.

[@tierone4761]

swaficionado That’s a good point! At least on a stainless gun the line can be somewhat smoothed out with the right grain of cloth. I did that years ago after getting an older Model 66. It didn’t take much effort to clean it off. Good Day to You!

[@desertfox2020]

@@tierone4761 All revolvers will get a drag line from the normal operation anyway though. The lug pops up before the cylinder is fully in place as it cocks the hammer which eventually leaves a mark. All my single actions have as much of a line as my double actions do.

[@vsmichael1]

swaficionado it scratches the cylinder by cocking it. My gun has only ever been cocked but the line is there. Hold your gun up to the light & cock it, watch the lock pin, it rubs against the cylinder.

[@vsmichael1]

desertfox2020 correct

[@swaficionado]

@@vsmichael1 absolutely. Best thing to do actually is to index it before closing...and take off the burr on the cylinder stop. Cheers!

[@parkeranderson1273]

re-watching all Barry episodes

[@MrTruckerf]

Yep, me too. Hadn't watched any for 5 years and now I find out that Barry has passed away in the interim. The guy was just cool and the type of guy it would be fun to be around.

[@buehlerama]

same, 4th day already

[@seanwoodburn2616]

Thank you SO much! I am a dedicated revolver shooter. This stuff drives me nuts. Gonna forward this from time to time.

[@mariarusso1155]

Hi Sean how are you doing 😊

[@DaanSnqn]

Barry's fixing heaven's guns now

[@vancityguy]

Preparing the troops to fight Satan's army.

[@elconquistador98]

Stupid comment

[@sludge4125]

Where’s heaven? I heard that it is near Kansas City. Is that true?

[@zilchnilton]

the angels use them to pick off any demons trying to cross the border between heaven & hell

[@onehandclapping_5356]

@@zilchnilton more like heaven and earth

[@corvuscrow5485]

My dad told me about the cylinder 40+ years ago. He wasn't a gunsmith just an ex-cop. He said "It's not good for the weapon and may damage it." made sense to me...

[@benjaminmelikant3460]

Had a friend cowboy my .357 once. He is never allowed to hold it, ever again!

[@Imasharkrawr]

+Benjamin Melikant 357 is a badass gun

[@willkschoenfeld94]

+Imasharkrawr 357 is a cartridge not a gun model

[@matthewrosenthal4673]

+William Schoenfeld Smart Ass

[@DirtMcGurt95]

+William Schoenfeld colt had a model called the .357

[@david7868]

Same thing happened to me.

[@shawn4900]

Such knowledge and expertise from Barry. What a gentleman and professional . RIP

[@popomomo12]

Barry you still live on in our memories! Thank you for all the knowledge

[@truvak]

thanks for the video, a real explanation of how to treat a weapon with care and respect. Now, who the F cowboys a 500 Magnum!?

[@KaliBlaz]

is that a 500 magnum or a missile launching platform!

[@Theenragedone]

both?

[@morrigancorbeau784]

GIVE ME THE PRECIOUS!!

[@Vccine]

Torpedo* to be precise as hickok45 calls them

[@VicariousReality7]

It is a 37 gauge shotgun

[@357Muzzleblast]

certified30 It's a damn battleship anchor! I hear they're coming out with a 14-shot .22LR version on that frame.

[@a68rebel]

Damn Barry, you left us WAY too soon Brother. We really need you NOW

[@jbdoingjbstuff]

Just subscribed to your channel a few days ago. I must have watched about 30 gripes episodes, then I found out about Barry's passing. RIP Barry. You are a true asset to the firearm community.

[@Driveby-Viktum]

This just came back up on my feed after 7 years. Rest In Peace Barry, We all miss you.

[@larkinoo]

I said it before on this site, but, I really miss Barry. He was a good guy !!!! A man after my own heart. I feel confident that he is up THERE looking down on all of us. And I believe he is one happy man where he is, and just waiting to be reunited and united with people cut of a good cloth..............

[@quentins5692]

God, if you give us back Barry, we'll give you Justin Bieber and Lindsay Lohan.

[@jsprite123]

And a few Kardashians as freebies

[@tony2063]

And Obama

[@belair55zz56]

+Anthony Owens And Piers Morgan and the Gov. of NY Cuomo.

[@rollastoney]

Toss in Trump and Kanye West.

[@RobertKaydoo]

+Quentin Smith And every anti-gun nut in the Country including Michael Bloomberg.

[@americandissident3580]

I really like that old re-parkerized Colt revolver. That's one nice looking gun.

[@samatardavidbndphotofilm]

Patrick Nathaniel O'Neal . That's like pointing out the fat girl in the group and saying you like that one. To each their own but the Model 10 and the 629 engraved would be my choice.

[@williamstoneman6977]

I love the look of the gun even though the color makes it look like it is an unrendered model

[@mr.rogers9319]

Fat girls are like mopeds there fun to ride but you don't want your buddies to see you doing it.

[@j.robertbragg4015]

I’m still learning from Barry, even years after he’s been gone. Thank you my friend! 😉👍

[@toxicsweatproductions7442]

Thank you!!! I tried to find what "Cowboying" a revolver. Couldn't find anything, then found this vid. I was doing this, not knowing. I know now!!!!!

[@shanebrainerd1644]

Barry is a legend! I will never learn more than he has forgotten!!

[@dhooter]

The Q stands for Qualification target. Definitely not Quantico lol. I know this because I spent some time with the FBI and DEA while in the Marine Corps taking the HRP and SAWIC courses.

[@jackmeyers7805]

I can only imagine how much knowledge we lost when this man went on. Like a modern Library of Alexandria.

[@JustSomeGuyNotAnAlien]

I came here from the newer video where you explain 8888. I love revolvers and this was really informative. RIP 😢

[@steelgila]

Thank you ! I've owned and shot single and double action revolvers for years(I seldom ever give most autos a second look but there are exceptions) and never knew about those tips you just demonstrated. And I'm always careful and particular with any gun(NEVER dry firing without a snap-cap or ammo, don't touch any blued metal parts unless I have a way to immediately clean them etc.) What a great line up of wheel guns too! I may loose sleep over that M-10 Smith.

[@Charlie-cc5wl]

I slammed my 500 shut the first time, and the cylinder jammed.. last time I did that... what an amateur move.

[@jackmehov5788]

I thought about it for a millisecond after getting mine home. Then I remembered my .38spc snubby is worn out from the previous owner (dad) doing that to it.

[@flipgunderson1946]

You motor-boatin' son of a bitch

[@sludge4125]

I don’t know anything about revolvers, but it just makes sense to take care of something you own, and, yes, love.

[@ronstrzelczyk789]

This is a wonderful video ! Barry,and friends give you real world knowledge,and practical advise. These Gun gripes episodes are the greatest ! I have waited many years for this kind of information made available to the public.Bad handgun practices tend to be perpetuated by false information,and ignorance ! Good work guys !

[@PcJoe243]

+Ron Strzelczyk Barry died

[@ronstrzelczyk789]

PcJoe243; Thank You !

[@SOLDOZER]

+PcJoe243 He did not really die. He checked himself out.

[@HawkEye9323]

I bought my first handgun, a revolver, a few weeks ago. I watched these videos before hand, and i found myself in an odd situation. I went to the range and had to explain revolver handling someone kept "cowboying" his revolver which irritated me >.

[@erniewalden3050]

Damn that smith is beautifull. I have 2 revolvers right now but i owned 1000s in my life. And i allways known not to slam the cylender my dad taught me that and everything i know about firearms. Dad was an old war horse. He served in the korean war as a foot soldier. R I P pop ill never forget you and i miss you.

[@reginalddobolek3213]

Just wanted to say thank you. Been shooting revolvers for over 30 years. You have e taught me a couple things I didn't know. Just goes to show gun training never stops.

[@GeorgeLaird]

Barry had a great style of imparting knowledge, pity he passed away

[@DerNutzer8]

I am glad that i found that Video couple of minutes ago. i immediately checked my Revolver (never cowboyed mine, but it is a used one) and found the crane partially unscrewed. now i do not have to use force to swing out the drum. Hammer push off not possible and it seemes To index OK. the gap mentioned looks also good. unfortunately the crane seems To be bent a little bit. I did not shoot it often, maybe it works good now. thank you very much for sharing this Video.

Learn something new everyday. I never heard of hammer push off. Seems like a mighty dangerous condition. I have a Model 13 that's had a trigger job before it was mine. I'm going to check for push off right now. Also, checking the spacing between the crane and the frame seems like a good idea.

[@soyounoat]

I was never told about closing the revolver by using the crane. 10 seconds after seeing him do this, I tried it on my 686 and it made perfect sense. I am sad to hear this man has passed on. He must have had a firearm encyclopedia in his head.

[@davidbonnichsen2901]

This showed up on my feed today and the first thing that came to mind is “wow, those were the good ole’ days of ammo.” 😂

[@GarretGoodbarrel]

When I was buying my S&W 686 at the gun shop on Friday the guy at the register was spinning the cylinder then flipping it shut on my soon to be gun while waiting to call in my info... After a good stare he stopped lol

[@Dontgetenslaved]

I would have made him get me a different one then....

[@GarretGoodbarrel]

Aaron mann it was the only one they had and it was used and only $600 which is a great deal. If he broke anything their gunsmith fixes it for free but apon inspection its all good

[@zpwslayer9719]

Kyle Clark 600 for a 686 is a great deal indeed! What barrel length does it have?

[@GarretGoodbarrel]

4" which is the one I was looking to get. I got really lucky. Had to drop it off at the gun smith today because the hammer would drop before the cylinder would lock up but luckily since I brought it in within 30 days of buying it, their gun smith will fix it for free. :)

[@rustyshackleford17]

I would have made him pick another one. Last thing you want to do is buy a gun that has to go back to the factory.

[@233kosta]

Rest in peace, ol' chum!

[@WildBillCox13]

You guys are always worth a watch. This was an exceptionally useful video. A primer on revolver etiquette and proper handling is a must for new owners and novice shooters. Without sensible habits a shooter is a danger to him/herself and those around.

[@AnAZPatriot]

I own a complete set of Ruger Blackhawk magnums from .22 to .44. I cant even count the tens of thousands of rounds that have been thru that .44 between first my dad, and now me. You still cant get any push off on that hammer. Hammer has never ever been fanned. Solid as the day it was made. Treat your equipment right, it will last forever. RIP Barry, miss you old codger.

[@jacksutherland846]

Always tilt a Smith forward when spinning so you don't grind and gall up the outer edge of the cylinder on the retainer nub. Colts are held forward on their own with a spring in the crane so you won't damage the cylinder like that.

[@KurwaRomek]

R.I.P. Barry. That man sure had talent for teaching!

[@trynsurviven2440]

Take care of your revolver and it will take care of you if and/or when it's needed.

[@Ocenteno70]

I miss Barry, he was one of those patient teachers. The Mr. Rogers of deadly firearms.

[@zanejay4056]

Boy I miss Barry. Good man, full of wisdom… can’t believe it’s been 11 years. Now in 2022! And all that ammo!! 😫

[@MadmanDKDK]

Rewatching my Barry playlist, miss him so much and loved watching the videos that he appeared in. The way he would explain how things worked, and just generally being himself. Hope you rest in peace, and have a good time shooting all the guns you want.

[@vassal11]

BARRY come back to us! We need you!

[@theextexianlibertarian3332]

We all miss him man :( RIP Barry

[@theextexianlibertarian3332]

juniorloccz The one with le beard brother

[@EricWilke1141987]

Yeah what happened with Mr. Barry?

[@brtecson]

He passed away years ago...

[@Philosophat75]

Still watching in 2019. Rest Easy Barry. Beautiful revolvers

[@GarrettDavisHustle]

I can't believe Barry is gone. R.I.P. BARRY!!!

[@Eldriitch1]

I am ashamed that I Cowboyed my Dan Wesson .357, but as of today I am forever changed by this. Thank you for your knowledge and lessons of respect that I will never forget.. R.I.P.

[@edwindude9893]

I found a S&W revolver while in Iraq 2003. Still got it and it doesn’t miss a beat. Made in 1954. It’s a model 28.

[@Ecreelman101]

Thank you sir. I'm not well versed in revolvers, so this was very informative.

[@oneshoeless]

This just popped up on my feed. Man I miss Barry.

[@pumkinhead6636]

Thanks for the tips. ....... rip Barry

[@rah1420usa]

I have a Parkerized 10-8 and thankfully have NEVER cowboyed it. I’m also impressed that he showed a parkerized gun. Only time I’ve ever seen anyone else having one.

[@smartacus88]

I miss this era of IV8888. Not just because of Barry, but because it was simply a more down to earth channel in those days. More relatable and entertaining to real gun guys. Now its a demolition derby of meltdowns, Eric says "standard fare" every other sentence, and Chad is Chad.

[@colejames423]

When I was originally getting into guns, these old "gun gripes" were some of my favorite content. I learned a lot from them. Kind of nostalgic tbh lol

[@andr3i68]

I love this channel! One of the few channels that creates very informative, yet fun content. You guys rock! 🙌

[@piehound]

That's amazing. There's a lot more to revolvers than i assumed. Thanks.

[@mariarusso1155]

Hi how are you doing 😊

[@piehound]

@@mariarusso1155 Hiya. Just hangin' in. Sometimes i hang out.

[@mariarusso1155]

@@piehound Nice to hear from you. Just looking for someone to talk to

[@piehound]

@@mariarusso1155 what brings you to this particular video ? My comment is 3 years old. Are you a gun owner / shooter ???

[@mariarusso1155]

@@piehound Was going through the channel and came across you here that’s why i messaged you if you don’t mind talking to know each other?

[@561arcadia]

thanks for the video!! its good to see someone that actually knows what they are talking about!!!!

[@dougrogers835]

50 years of owning guns and I have never heard of trigger push off. Thanks for the advice!

[@drinkwater319]

Every now and then I come back to watch Barry. I don’t like guns but I love Barry’s knowledge and enthusiasm. At the time I read a few police reports and seems Barry’s demise was accelerated by his wife or ex wife. Didn’t find anything about the problems with Moss...Barry was ‘let go’ a few months before he passed away. I don’t think he knew how popular he was and he could have earned a good living away from the internet at gun shows etc. You can see the way he carefully replaces the guns he loves them. RIP

[@optiTHOMAS]

this guy is awesome! the beard of Wisdom!

[@AcaJudiJudiJudiJudi]

he did leave these wonderful videos and I thank him. RIP

[@ryanogden7321]

Looking at purchasing my first revolver soon, probably used because "revolvers are simple compared to semi auto pistols. what damage could really be done?" or so I thought. Very good video, now I'll know what to look for.

[@youtert]

Revolvers are actually more complex than semi-autos.

[@indicasativa4264]

Rip Barry. just buy a Ruger if you want a gun that lasts. Has front and back locking mechanisms, built much stronger than S&W, and like Barry says: never cowboy a revolver.

[@tylerloshaw6855]

I'm not a revolver guy. I owned two and sold them but I never knew these little tips and what not to do. I'm glad I watched this video now I won't make a fool talking revolvers with people.

[@josephmoore5069]

RIP Barry, God bless you are missed!

[@greedfox7842]

good revolver etiquette: leave the thing in the museum where it belongs!

[@robfab5204]

Why haha

[@McGuireJJ]

Barry is a mountain range of information.

[@MelleLaCruze]

everytime I saw someone cowboying a wheelgun at a range, I cringed

[@mikecarson8061]

Sorry to hear of his passing. Very good video, I just learned something new.

[@RealDealAmerica]

Just popped up in my feed. I miss that old guy(fine soul). God bless you and all the patriots of Georgia.👍🏼

[@chase_h.01]

Useful advice on how to check used revolvers. A dead man's memory lives on through the passing of his knowledge.

[@super90girl]

So I take my gorgeous $2500 '91 Colt Anaconda into LGS because I happen to have it with me and the young hunky guy I'm acquainted with, who works there as a salesman, wants to check it out. He opens the soft case I have it in and admires it with awe. I don't think he'd ever seen one up close before, let alone touched one. So he picks it up and after turning it over in his hands a few times, uttering words of admiration, he opens the cylinder, gives it a healthy spin, and slams it shut. I about bit my lip and was cringing hard mentally and emotionally. I didn't say anything though, I didn't want to embarrass him in front of people, and besides he's a really hot guy and makes my knees weak, he just obviously doesn't know how to handle a revolver. You would think he would be more respectful and knowledgeable, especially with someone else's expensive out of production gun. I made sure to get it away from him as quickly as possible, although I wanted to say "wtf dude" and just take it right out of his hands, lol. I don't know if he was trying to show off for me 'cause I'm a cute chick, or what. Maybe he realized his transgression, because he did give me a very nice Colt hat afterwards.

[@ALMIGHTYBUNGHOAL]

When I bought my S&W 586 the salesman behind the counter was just about to do that before I stopped him. Never feel uncomfortable to tell someone how you want your property handled. After that incident I ALWAYS tell someone to handle my gun the way I want it handled. Unless the person has a overinflated ego they will understand. If they don't find a new shop. I was told by the owner that the gun was theirs until I walked out the door and that the employees could handle it in any fashion they chose. People like that aren't worth the time of day.

[@downfromthereeefters]

Hi

[@erictalkington5674]

@@ALMIGHTYBUNGHOAL wow. Yeah, as soon as you hand over that money, it's no longer their's. That would be the last time I'd shop at that place. What a dick.

[@ALMIGHTYBUNGHOAL]

Eric Talkington seeing that my comment is 3 years old, this will shock you. That shop is till around and expanded enough to open a range. Luckily another shop moved in with 3x the inventory and wayyy better service.

[@oliverrugg3732]

What are you hunting with that 500? Aircraft?

[@MontanaWelldigger]

As a retired LEO from the wheel gun days this Gentlemen is spot on.

[@leonardpearlman4017]

Came in late here, but quickly learned a few things that I should have known as a kid! This guy definitely seems to know what he's talking about, and is clear and to the point. I miss him already and this is the first video I've seen. Well, everyone's revolvers are going to last longer now, just b/c we watched this!

[@brandonbloomer6499]

The way I look at it, if someone else wants to handle their revolver like that, let them, or maybe let them know what it does to their revolver. As long as they are not handling mine like that, who gives a damn?