idk about the rest of it but you can put fuel injection on an SBC
@infamousnova2 жыл бұрын
Exactly
@ceceliarodrigues10 ай бұрын
Same lol. Takes away from the nostalgia.
@robholmes21295 ай бұрын
still not gonna get the MPG of an LS though
@joshuagarvey93622 жыл бұрын
Everything he says doesn’t make any sense.The same thing can happen with an LS you still need A mechanic.If you want to fix your so called idle problem then bolt on an EFI.All motors need maintenance.Oil has to be changed,plugs has to be changed,air filter,so on and so on.Your 383 now we are talking.I would take the 383 over your 5.3 LS all day.
@ABs70nova2 жыл бұрын
Ls = driveability Sbc= far less cost
@KGisthename2 жыл бұрын
Bottom line for me is if you cant adjust your carburator then go LS. I learned from dad when I was a kid and have been doing it all my life so I love my 383 stroker.
@mblake04202 жыл бұрын
😆 carbs are such easier if there is no computer near by on side of road
@jessederossett14849 ай бұрын
Sbc all day
@jlarocque84 Жыл бұрын
Must be this guy has never heard of the one piece small block Chevy rear main seal lol.
@Blizzon17877 Жыл бұрын
And in Chicago ls swap looking at 12 to 15k
@jlarocque84 Жыл бұрын
He never actually says how much he has in his ls swap must be his cheap isn't the same as most other people's.
@clydebethatway7485 Жыл бұрын
There’s just some guys that can’t work on an engine why would you have to re-do your timing once it set it set
@Joetemalet0 Жыл бұрын
Oh wtf my boy shady is here wtf 😳 the last person I’d expect 😂😂😂 wassup shady 🤘🤘🤘 creek kiids 🧐
@christmanscustomcreations6884 Жыл бұрын
just spend 800-1200 $ & put efi on your 350 !
@auto-kh4gj Жыл бұрын
Lol 😂 such bs!
@rubenramirez211618 күн бұрын
My 84 C10 355 5 speed has 420 HP I’m out running camed 6.2
@SWB_mike Жыл бұрын
So full of crap that ls with Holley sniper is 1800 b4 anything installed the 350 is best bang for the buck period
@itchy-scratchy2 жыл бұрын
I just did a 86 chevy g20 extended top. I rebuilt a 6.0 with a 4l80. All in 9k. It had a stock 305 and th350. It had 97K odometer It needed new gaskets intake and a new trans. After pricing out new trans more or less rebuild on the top end. Swap made way more sense. It's tuned to get 26 mpg. I can tow anything.
@Millie.196527 күн бұрын
what’s the 6.0 come out off?
@itchy-scratchy27 күн бұрын
@@Millie.1965 you can get 6.0 4l80e out of 2003 GMC savannas and express vans usually cheap at auctions. I prefer DBC it's easier than messaging with petal issues.
@luccerio2 жыл бұрын
Holley sniper EFI will fix all that.
@KGisthename2 жыл бұрын
it aint cheap though dont forget
@dropzonemedia7811 Жыл бұрын
@@KGisthename definitely cheaper than Ls swap by far
@clydebethatway7485 Жыл бұрын
Just got an elder Brock 850 and be done with it very reliable very fast
@ceceliarodrigues10 ай бұрын
Please don’t LS swap that beauty lol.
@99alexisagc2 жыл бұрын
Cool s10. I got a 85 2.8 v6 ls swapping in the near future
@thebiguy7231 Жыл бұрын
Love episode that featured Hector 's truck.i have a 02 silvarado with 4.8 and I want to put a 5.3 in to use as a daily driver.Any suggestion on how to do it on a budget?ps I'm in Florida...
@jlarocque84 Жыл бұрын
Going from a 4.8 to a 5.3 is as simple as unbolting the 4.8 and bolting the 5.3 in and your done
@thebiguy7231 Жыл бұрын
Will transmission line up and will I need computer for 5.3?
@mrclean1463 ай бұрын
I like hearing real numbers. Great job on these builds.
@71Clorox Жыл бұрын
That’s not true I let my car sit over the winter and my carb is still failed in
@Timmermon632 жыл бұрын
Nice trucks, what’s the detail on the hood called?
@tubehead8203 Жыл бұрын
Keep in mind that he’s in Cali
@71Clorox Жыл бұрын
Dailed in
@jonnyboi30483 жыл бұрын
Awesome video! What 383 crate motor did you buy? I’m back and forth myself for a 55 gmc I’m doing.
@williamherron9365 Жыл бұрын
A stock 350 vortec from a late 90s truck will make a shade over 300hp and 400tq bone stock with just switching to a carb intake manifold. They way overpower the ls truck motors. They are incredibly reliable. Add a cam and valve springs and retainers and they will make 450hp+ easily.