Is the 6.4 intake manifold worth it on the 5.7 hemi? *MUST WATCH*

Thank you for watching and have a blessed day 🙏🏽
Want to know more about the 6.4 intake manifold swap? Look no further!! Let me know if you want an up close video of my wiring as well 👍🏼
See you guys in the next one
Parts list:
-Genuine Chrysler 68064996AA Electrical Wiring www.amazon.com...
-Gebildet JD1914 12V 40A Car Relay with Harness Sockets, 5 Pin SPDT Relay with Color-Labeled Wires for Automotive Truck Van Motorcycle Boat (Pack of 2) www.amazon.com...
- 5 Pack 12V Car Add-a-Circuit Fuse TAP Adapter Mini ATM APM Blade Fuse Holder www.amazon.com...
- www.summitraci...
- Painless Performance 70207 Weatherproof Cirkit Boss Auxiliary Fuse Block, 7-Circuits (3 Constant/4 Ignition) www.amazon.com... (if needed)
#charger #challenger #dodge #mopar

[@carlitot5388]

This guy said the intake manifold long tube headers and tune is a good bolt on upgrade for the 5.7 hemi 🔥💪🏽🙌🏾

[@mrhyde0705]

I did this mod with the z automotive SRV controller. Looks clean a.f. car is much more responsive. Ive hit my torque limit numerous times since installing this. Really compliments a cam and other various mods. With the SRV controller i didnt need to cut into ANY wiring. Or add the msd switch.

[@tallguyinahemi]

Nice! Definitely a great mod for the 5.7!

[@jared241987]

I recently bought the 392 intake manifold for my 5.7 300 S.. and I’m leaning more toward the z automotive SRV controller as well… is there anything else needed or a true plug and play??

[@mrhyde0705]

@@jared241987 true plug and play, youll need a different a fuse tap though

[@mrhyde0705]

@@jared241987 plug the srv controller in BEFORE mounting the intake. Youll thank me later lol

[@jared241987]

@@mrhyde0705 lol thanks man! Where can I get this fuse tap?

[@Terry-oy2hx]

That is awesome. I've stumbled across one on a site was contemplating it trying to build an r/t magnum on less then a shoe string budget. But the low end torque is enough to pull a whole shot on a less weight Rice burner. I've already got a predator 2 tuner K&N intake and I'm straight piped from the cats back. So adding the 6.4 should put me just about 400 usable hp on my rear axles. But yea definitely going to need a parts list and to see that wiring video. After that I think some srt 8 20s and I'm done with the car. It's already fast but I'd like to go play with the skat pack 392s. This will help. 🤘🏼

[@alkhapone7124]

You’ve gained a follower u jus have a good vibe n ur channel seems wholesome n u we’re very descriptive in ur vid 👍

[@tallguyinahemi]

I appreciate that more than you know man! 🙌🏼

[@rustyshaklferd1897]

Yes I’d like to see how you wired it. Also a price and part number on the msd box you used. Thanks for the informative video. Probably be my first mod on the new 5.7.

[@rsoisaiah]

Tall Bastard In a Hemi sick video man but easy my gfs on this app :(

[@stevegesell7433]

Just a recommendation but probably should ditch the scotch locks on those wire connections they are not a reliable connection and it would really ruin your day when it starts misfiring on that cylinder that you tapped into on that injector. Or screw up your signal to that controller you have.

[@jbcaptain11]

I have a bwoody intake on my charger and I would definitely recommend it. Idk that cams will be worth the money for how they make your car drive(shitty) most the time

[@Hemi.Mani57]

Bad tune?

[@hgkillzone]

Good video bro, now me watching this video I have to do this mod. Thank you for making this video. And keep up the good work 👍👍

[@tallguyinahemi]

Thank you for watching I appreciate it 💪🏼

[@robcolletti]

Would truly appreciate a head sup if you see any good deals on the 6.4 manifold. The ones I find are like $1k.....which is fine but hearing you mention $200-$600 range makes me think I should hold out for a better deal.

[@tallguyinahemi]

I came across two complete 6.4 intake manifolds for $500 on Facebook. Join the groups and marketplace

[@highlifela7139]

Find an old wracked truck

[@robcolletti]

@@highlifela7139this is old - I found one, installed it and then traded the car and got a 392. I will say the truck manifold is different though.

[@user-qg5ou9bd8z]

Hey I'm about to do this mod to my rt can you send me a video on the things I will need to buy besides the intake itself and how to wire everything up thank you

[@kvngsav1917]

Good videos bro i watch you on TikTok 💪🏾💪🏾

[@tallguyinahemi]

Thank you bro!! 💪🏼

[@TRAPnowDIElater]

You & @wearevenom have the most impressive r/t set ups I’ve seen on KZbin.

[@tallguyinahemi]

Thank you man!! Stay tuned, full mod list video dropping soon!

[@amermuscle]

I'm getting one for my ram only bolt on im missing I just hate the 1400 price tag for everything you need

[@YouTubecommunityCollege]

We need that video. Ik you don’t have the 5.7 anymore but we need a video on that wiring

[@tallguyinahemi]

Forsure man, I may put it out for next video. I have the wiring diagram in my glovebox lol

[@YouTubecommunityCollege]

@@tallguyinahemi😢 we need you bro

[@franktime4425]

Thanks for the info please do a vid on wiring

[@VRJmedia]

Is this swap possible on a 2005-2009 charger?

[@makantahi3731]

no, i can watch MAP on diablo trinity and on WOT no change of MAP on any rpm

[@myrtproject2324]

Question my g what would you recommend 392 cam or just go for a custom my goal is 500whp for now i k ow i have a lot to go , also just gi for a custom manifold or the 392

[@how_long]

If you want 500 to the wheels you are better off getting a blower. However be prepared to replace your drivetrain with hellcat parts (trans, axle and driveshaft). The 5.7/6.4 drive train is rated for 500-550 whp/wtq. Its not a matter of IF something will brake, but WHEN...

[@dariussmith12373]

Might be one of mods down the road

[@tallguyinahemi]

Definitely recommend it if you plan to stay NA

[@VinylSlimShady]

What did you do about the fuel line being in a new location for the new intake manifold? I have an 08 5.7 with the 392 manifold and the fuel line does not reach around to the new spout. Any advice is much appreciated!

[@cryptidkilla339]

Flip the rails 180 from one side to the other

[@MoparVsWorld]

I just upgraded my cam and did a msd delete what all would I need to do this

[@rustyshaklferd1897]

What control module do you 5.7 guys recommend to control the active runners when installing a 6.4 intake manifold? I’d like to add this mod before adding a wet plate nitrous system.

[@tallguyinahemi]

Sorry for the late response man I didn’t see the first question.. I know MMX makes a super simple control module. I actually found my old wiring diagram for the cheap way I wired it up. I used msd box with no cirkit boss

[@tallguyinahemi]

I may make a video on the wiring and what parts I’ve used for it. It saved a lot of money

[@user-kq2ii8xx2j]

Hell yeah

[@jeremymccants4120]

Yes please do a wiring video

[@tallguyinahemi]

Will do! Stay tuned

[@jeremymccants4120]

@@tallguyinahemi thanks bro!

[@9glo500]

Gone head and get the srt hood and bumper keep the back bumper the same just get a diffuser

[@tallguyinahemi]

Facts I need a srt hood

[@gothamvelocity8881]

Yoooo 😊😊😊😊 just sub ima be keeping up on your vids just got a hemi

[@tallguyinahemi]

Thank you 🙏🏼

[@user-qg5ou9bd8z]

​@@tallguyinahemican you send me a video of the parts list and wiring video please

[@ryanthomas3554]

I’m thinking about putting a 5.7 intake manifold on my 6.4.

[@tallguyinahemi]

For boost or NA?

[@ryanthomas3554]

Ha, I was just joking. Seriously though, nice build. That thing looks and sounds nasty.

[@tallguyinahemi]

@@ryanthomas3554 thanks man! And I was hoping you were kidding 🤣🤣

[@andrewjaimes4546]

So I've been wanting to install this all Im missing is the aftermarket items to active the runners but I want to know if I can install it without the runners being activated. Ik it won't keep a consistent power band but I have too much free time and I'm not tracking the car at the moment, so the overall question Can I run the intake manifold without the active runners?

[@tallguyinahemi]

Yes you can!

[@MoparOrNoKar]

U tryna sell your intake manifold or you are currently using it I know u put a 392 in your car now…enjoy the content btw

[@andrewrichardson5581]

Is this identical to the 5.7 in the 300???

[@baldbeast37]

Where you get the small rubber holes that connect to the small air filter

[@tallguyinahemi]

Autozone or any local part store!

[@thebeast1644]

How did u do the msd box install

[@gfish45]

its all good if you don't have any warranty on the vehicle.. if so it will be all voided due to engine mods and tune upgrades.. uuugghhh!!

[@kyranadkind5263]

can u help me put that on my cammed chrysler 300

[@rockaveli1013]

I have a JLT series 2 cold air intake can that fit with this manifold?

[@tallguyinahemi]

Depends if it’s for the 6.4 or 5.7.. the 5.7 one has a longer intake pipe to reach the intake manifold port

[@rockaveli1013]

@@tallguyinahemi I have a 5.7 challenger

[@tallguyinahemi]

@@rockaveli1013 I don’t think it would fit.. you may just need the 6.4 piping and can use the same filter

[@rockaveli1013]

@@tallguyinahemi ok thanks

[@Miabandz-gt9ne]

Yoo can you help me with mine

[@tallguyinahemi]

What you need man?

[@chicosci1939]

Did you have to buy the actuator separately?

[@tallguyinahemi]

No mine came with the actuator

[@islandRT]

John 3:3-Verily, verily, I say unto thee, except a man be born again, he cannot see the kingdom of God. John 3:7- Marvel not that I said unto thee, Ye must be born again. John 3:16-For God so loved the world, that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life. ✝️🤍

[@Terry-oy2hx]

That is awesome. I've stumbled across one on a site was contemplating it trying to build an r/t magnum on less then a shoe string budget. But the low end torque is enough to pull a whole shot on a less weight Rice burner. I've already got a predator 2 tuner K&N intake and I'm straight piped from the cats back. So adding the 6.4 should put me just about 400 usable hp on my rear axles. But yea definitely going to need a parts list and to see that wiring video. After that I think some srt 8 20s and I'm done with the car. It's already fast but I'd like to go play with the skat pack 392s. This will help. 🤘🏼