Is the Porphis worth the extra money? HTE vs split nozzle 2 guns 1 cup match up

[@ricksteelcustoms3196]

Porphis-PRD-717 VS $260.00 VS. Black Widow HET $180.00 The Porphis did a better job and I don't know if it is the lighting but it also looks like it is a slightly deeper black. Likely because it has a higher transfer efficiency. I bought the Black Widow HET and I like it better than my old school Devilbiss HVLP guns. But after watching this I am going to have to buy the Porphis-PRD-717 VS Nicely done Triggerman!

[@thetriggerman954]

Thank you Rick, the gun is surprisingly a dam good gun. I was sceptical but as you see it gets it done and it gets it done with ease ! Thank you for tuning in 😎💪🏼

[@robertorivera6958]

brother triggerman your youtube channel is so far the best of showing people who,s are starting in this auto painting deal ,,, like me ,,,, i got to say i have watch painting from all over the world ,,, yeah ,,yeah even the gunman in Australia ,,,, for sure i can not get a more clear information on how to spray with all this low end spray guns ,,, any were but in your channel ,,, i know you own most of the best spray guns out there ,,, but you are willing to show people like me who,s never done this before ,,,, how to paint ,,, what,s the pressure for this one and the others how much fluid turns on this gun and the other ,,, i mean can,t get any better than that .... i already paint my from bumper ,,, rear bumper fallowing your teaching and i can not be any please with the output ,,, of your teaching ,,,,, brother just don,t stop your teaching keep up the amazing clarity in wish you can transfer real time information on how to do this auto painting job ,,,,, bravo ,,, amazing

[@thetriggerman954]

Thank you Roberto I really appreciate you. Good to know that the information is coming across well. And every day I try to improve the quality of the videos for you guys thank you again 🙏🏼❤️

[@sideshowscot7815]

It's a great channel for professional painters too. In my opinion the best around. I sub to a few. I prefer trigger to the gun man. He has a great sence of humour 🤣. Like many of his followers I'm proud to say I have been with the channel since the start. It's a great place to be 😎👍

[@jiujit49]

I like you staying on low-budget spraygun comparison topics,it's what people want to hear, ty

[@thetriggerman954]

I'm going to cover everything my man from the low end to the high end. But I do realize more of my subscribers want to see the more budget friendly guns

[@douglasthompso]

Went out and got a Porphis 717. It is a winner for sure.

[@thetriggerman954]

Yesss nice one 🙌🏼😎

[@thebigbravo3529]

Big Trigger! Bless Up. Im thinking Porphis on this one. Great video as usual

[@thetriggerman954]

🤔 thank you for watching. Bless up Brudda ✊🏼

[@KILLER_BEE_98]

I know I’m late, but nice shootout Gunslinger! I loved it. You can’t go wrong with either one, but I like that Porphis.

[@thetriggerman954]

Thank you KB yes both good guns. But Porphis hit the bullseye 🎯 🤜🏼🤛🏼

[@srodgie]

Hey Trigger! Man, i love your channel! Everything about it is spot on! 👌 please don't change a thing! I've ordered this Porphis in the same setup as you. Great finish! 👌 Following a couple of messages, this gun much prefers spraying at a low pressure, after watching another KZbinr's review..... give it a go Brother! 👍 Have a great day! 🙏😎

[@thetriggerman954]

Thank you Rodgie, I won't change a thing on this channel 😉 but yes I'm learning every time I use the gun that it's liking lower pressure, so I'm going lower every time I use it until I feel that sweet spot. Thank you brother. I appreciate you 💪🏼❤️

[@thomasschlemmer607]

I have done this work for years at home, just love your videos

[@thetriggerman954]

Thank you Thomas, glad you enjoy the vids 😁💪🏼

[@edilsonaraujo1118]

I wasn't written on your channel, but now I am I see that you are a responsible brother

[@thetriggerman954]

Welcome 🤗♥️🤙🏼😎

[@sideshowscot7815]

Update trigger. I just ordered one. The customer service is amazing. I was also sure to tell them that without these videos I wouldn't have come across their products. I told them that you had been doing some great work letting us all know how these products perform by producing top content. They sounded very grateful and I asked them to get intouch to thank you for making my purchase possible. Spray on brother 🤜🤛😎👍

[@thetriggerman954]

Ohh 😯 thank you Scot. I appreciate it. I think you'll be happy with the gun. Let me know what you think once you try it. ❤️💪🏼😎

[@johnbiggs9561]

Love the channel. What I'm seeing is that if you are a DIY weekend warrior who does a few paint jobs a year then these guns are all very similar and you may as well buy the cheapest i.e Vevor. If you are a pro sprayer and want the best finish direct from the gun, then Porphis, or Iwata, or DeVilbis or....whatever, you need to spend many times the Vevor price for that slight improvement in finish from the gun.

[@thetriggerman954]

Thank you John glad you're enjoying the channel. And yes you're correct this gun is a step up from the vevor, I'm not even going to do a battle of the two guns lol this think will kick the Vevors ass K.O 🥊🥊

[@billbeckett1021]

I am going with the Porphis ! Just ordered one from your link.

[@thetriggerman954]

Awesome, let me know how you like it. 🤙🏼🤙🏼

[@billbeckett1021]

It came in and I was wondering what PPS adapter do I need. Feels really nice. Shot Dimension Clear and it did a respectable job.

[@thetriggerman954]

@@billbeckett1021 sweet 💪🏼 I use Devilbiss Dekups system, but it takes the same adapter as the new blackwidow, So maybe you can cross reference it. It's the same threading as the new Black Widow with the rear fan control.

[@billbeckett1021]

Picked up the adapter at HF. Fits perfect thanks.

[@thetriggerman954]

@@billbeckett1021 good to hear. And you're more than welcome 🤗

[@kennycharneca1]

2 videos in less then 24 hours ?? hell yeah !!!

[@thetriggerman954]

Man I have like 10 vids done and sitting, if you noticed the bumper video I had the old 1,000 subs hat lol 2 months old 😂

[@thetriggerman954]

Actually 4 vids if you include the new channel. " Paints By Trigger" check it out 😉😁

[@kennycharneca1]

@@thetriggerman954 where can I get the link fornthe new channel

[@thetriggerman954]

@@kennycharneca1 👇🏼 youtube.com/@PaintsByTrigger?si=GxZE8PN5XiqVfGHQ

[@lesliwells5433]

I AM REALLY GLAD THAT I WATCH AND LEARN BEFORE I BUY,OR ELSE KNOWING ME I"LL HAVE OVER 100 GUNS

[@MRbuffaloBILL]

Tried the black widow today I ain’t going to lie it’s the real deal, for the price and the finish it gives you can’t complain at all worth the hype !!

[@thetriggerman954]

Yea man for the price it's definitely top tier in that price range. I got no complaints about the BW ✊🏼

[@juanmata2433]

5 min in... I'm going porphis. Looks like it's putting more on, more Consistent too.. and when it was flashing it was flashing at the same rate.. the black widow side had some over loaded spots and it was all gun cause u applied both the same

[@thetriggerman954]

You got a good eye. 👀 U Pay attention to detail 💪🏼💪🏼

[@thetriggerman954]

Ohh it's you Juan, yea man you're an O.G in this I know you already know 🤣 thanks man 👊🏼

[@Killer-lo3ig]

Good joob Trigg! I saw on other channel that this porphis gun (prd 717) will lay clearcoat like glass at 1.3bar (19psi) and i'm curious if that is the case even with car pannels plus the advantage of low overspray. If you can try this on a future video ill be very grateful. Keep up the good work!

[@thetriggerman954]

You got it 🫡

[@raymondsanders1886]

What up Trigger ? I appreciate all the knowledge you drop on your channel! I have a 87 r10 lwb truck. My First time painting a vehicle. It’s my project. It has the original paint, thick peeling clear and a surface rusted roof. (Down to the metal) I have some questions to ask you. Que #1: Will 2k urethane primer-surfacer, base (single stage) black and premium high solids clear do the job or do I need a dedicated sealer primer also? Que #2: Will 1 gallon of primer with one qrt of activator be enough to spray the whole truck? Que #3: Is 6 qrts of clear / activator enough to spray the whole truck with 2-3 coats ? Que #4: Can I spray primer with a 1.3 tip? I have 1 spray gun I purchased months ago… the Black Widow HTE with rear controls. I am going to take the bed off, hood and maybe the two doors since I have to replace my rusted cab corners and rocker panels. I appreciate your feedback and thanks in advance.

[@thetriggerman954]

#1 all of the materials there should do the job you don't need a sealer primer . #2 one gallon of primer sounds like plenty of primer you can even reduce your last coat to stretch the material and smoothen out the surface for easier sanding. #3 6 Quarts should be enough clear that gun doesn't put out an excessive amount of material so you should be ok if you want to maybe out your first coat on with the fluid knob turned in 1 extra turn just so your putting a thin coat then gauge from there and adjust the fluid out as you go. # you can spray primer the the 1.3 it will just take a lot longer to getter done open that fluid knob all the way out and turn your fan in a few turns and you should be good to go. Hope that helps and good luck on your project 👊🏼🤞🏼

[@jiujit49]

You know, my biggest thing with these lower line guns , not so much clear but how it lays those medium heavier mettalics, (mottling). It would be cool if you can do a very specific video on med. Charcoal mettalics using or finding that budget gun that can spray it. So cool 😎 ty

[@thetriggerman954]

I've done videos on them. Look at my older videos they spray the metallics just fine as well. I haven't done one specifically with this Porphis But I have done them with most of the lower end guns I've used on the channel

[@UndergroundPaintKing]

Another 🔥 video Triggerman 💯💪🏾

[@thetriggerman954]

Thank you champ 🏆 💯✊🏼

[@TheVegasbud]

717 cause I looked at the specs lol 717 has that tulip tip and it uses less air . 4 split tip atomizes way better you can see it from the jump. I had to watch the clear part again ,i bet you could drop down to 24 psi on the 717 and still get a relatively flat finish . looking good .

[@thetriggerman954]

Thank you Vegasbud, I'm going to keep playing with the gun I started out at 30 psi and slowly making my way down. But you're probably right. I'll try that on the next job 👊🏼🥊👊🏼

[@williammoncrief3826]

I can't give you a true answer. Both guns are great.

[@thetriggerman954]

Thank you for chiming in 💪🏼

[@reynaldorivera743]

Triggerman at it again slaying it 👏👏👏👏👍👍

[@thetriggerman954]

Can't stop Won't stop 🤠🤪🤜🏼🤛🏼

[@davesiringo7147]

5 minutes in and the Porphis makes the BW look like the Craftsman spray gun I started with in 1976. The 717 is impressive, but, does it show signs of enduring like the Sata 3000? Edit: the BW did lay down the clear very nicely as well.

[@thetriggerman954]

You can see that right 😂 and some folks still say the black widow won. Some people just see what they want to see. Definitely seems like a well-built gun man, only time to tell something what I can see I honestly think is something will last. I still have my Sata Jet 3000 and that's 20 years later.

[@davesiringo7147]

​@@thetriggerman954I watched that video earlier, that's why I asked. Was the 717 a 1.3 with the split nozzle?

[@thetriggerman954]

@@davesiringo7147 yes it is 1.3 they have a 1.4 as well. But the one I'm using is 1.3

[@DennisCrissSr.]

I got two black widows, the side fan control for base and rear fan control for clear, I love these two guns, now I gotta get this porphis 717, it's your fault triggerman 😁

[@thetriggerman954]

Hey man don't blame the messenger 🥴🤣 it's a good investment and it'll be a step up from the black widow

[@lesliwells5433]

I WAS JUST SCARED THAT THE NEW SAGOLAS WOULD BE SLOWER?

[@jeff6969]

I gotta say Porphis flowed a lot more paint. Seemed to run smoother.

[@thetriggerman954]

My thoughts exactly 💯

[@sideshowscot7815]

Hey trigger. Great content as always. I'm going to order one of these just for something different. On the site I cant specifically which fluid tip I want. Do you get both 1.3 and 1.4 with the gun? Great paint work. Spray on brother 🤜🤛😎👍

[@thetriggerman954]

Thanks Scot unfortunately it only come with one tip. But not sure which guns you're familiar with but this 1.3 allows me to spray with the same speed and similar results as my Lph400 with the 1.4 or even my ws400 I run a 1.4 and this gun is right there with those. People are telling me to try the 1.4 but I seriously think I would run into issues, runs, solvent pop. It all depends on your climate and materials. But hope that gives you an idea. And remember I love to paint fast. And if I'm scared to try it. That tells you something.

[@janhalaxa1888]

Two guns one cup - left me in pieces 😂

[@thetriggerman954]

😉😅😅🤯

[@nickcrill7718]

I’m going to watch the other channel but I do like the commentary on your normal videos. Excited to see that chameleon paint job!

[@thetriggerman954]

Thank you Nick, 98% of the people live the voiceovers, but I do get the occasional miserable guy that doesn't want to hear anything but air coming out of a spray gun 😁 So I try to please everybody 😉

[@jamesharrington9826]

Porpoise looks better ! Great job trigger man as always 😁

[@thetriggerman954]

Yes sir. It sure does, thank you James 🥳🍻

[@silvercommander]

Black widow for me 😊

[@thetriggerman954]

🤔🤷🏽‍♂️

[@JohnWD40TC02]

Hi Trigger, great head to head shootout there Mr Boss Man Sir😁as soon as this video started I thought the Porphis would be crowned the winner but I haven't seen the Black Widow apart from the reviews on here but just from the finish on the clear I think the Porphis gives a slightly better finish with a deeper flatter gloss👌loving these 👌2 guns one cup comparisons Trigga!!👏 Ok I'm off to check out your other channel bro😎🤠😂John UK

[@thetriggerman954]

🥳🥳 thank you John yes the Porphis took the 🏆on this one. Glad you like the new series 2 guns 1 cup 😎 now we need a new challenger to go up against the Porphis 🤔

[@JohnWD40TC02]

Have you tried the Fuji MP-V8 Trigger, I have 2 of them and they might be a contender against the Porphis but they are probably not as well made🤔 I couldn't find your other channel Boss, maybe you could add a link to it in the comments on your video🙏👍

[@wrightsrrt871]

Porphis defenantly killed it lol all good 👍

[@thetriggerman954]

Yes sir

[@lesliwells5433]

WHAT'S THE DIFFERENCE BETWEEN PRD 627 VS,COMPARED TO PORPHIS PRD 717 VS

[@thetriggerman954]

We're going to have to have a matchup to see the difference

[@lesliwells5433]

@thetriggerman954 YEAH, YEAH TRIGGER, THAT'S WHAT WE DUYIER'S WANNA HEAR,A GOOD RAP BATTLE YEAHHHHH

[@mikkokinkki2694]

super nice job..... good hands....

[@thetriggerman954]

Thank you sir. Much appreciated 💪🏼

[@bradsrestorations1085]

Porphis looks like better paint transfer.

[@thetriggerman954]

Definitely

[@juanmena4676]

Would you recommend using the porphis 717 for primer/base/clear or using a separate gun for primer? If so, what porphis model would you recommend for primer

[@thetriggerman954]

@@juanmena4676 No I wouldn't recommend you to get for primer, just get you a cheap harbor freight gun for primer. That's what we use at the shop cheap $30 guns and Just toss them after a couple years

[@2bParagon]

Just my 2 cents, price point being much more on the Porphis, Black Widow is 152.99 this weekend, the Porphis uses quite a bit more CFM, which usually makes sense putting more paint on and smoother. Good comparison? not really, like comparing an LPH400 to anFLG5 or K4, jus' sayin'. For mid 150 the BW is a great gun.

[@thetriggerman954]

Yea I do the comparison on guns that my subs ask me about. But thank you for your 2 cents. It's greatly appreciated 👍🏼

[@stonebruze1499]

Let's see you prep and paint

[@thetriggerman954]

@@stonebruze1499 We have a dedicated prepper at my shop I'm only in the spray booth. I would love to do body work, prep cars, cars, detail cars, do diagnostic work , the framework I would love to do it all for you guys but my position here is strictly painting.

[@estebanreveles5886]

Hola buenas tardes siempre veo tus videos y me gustan mucho. Compre la pistola porphis PDR 717 Y NO LA pude regular me podría decir como regularla gracias

[@thetriggerman954]

Hey my man. Once you put a regulator on the gun it should regulate the pressure. There is also a knob at the back of the gun that adjusts the pressure. It's the second knob on the back.

[@Saunders64]

The Black Widow is the better gun, especially for novices, because is puts the material out at a slower pace (which means more control over the application) and less likely to get runs in the surface. The Porphis puts the paint out quicker, which in some instances for a less experienced operator could lead to issues such as sags or runs. More control with the Black Widow is better in my opinion. You get awesome results with either gun, but the Black Widow is more user-friendly. Black Widow Wins !

[@thetriggerman954]

Right on brother 💪🏼

[@user-un5my5bw4j]

I have the porphis prd-715 for my clear gun and i run it wide open and can say you really have to mess up to run clear because i havent yet with it. I have run clear with my slower dv1-c because its harder to go slow than it is fast. Plus that atomization of the porphis is a step beyond other cheaper guns. Also u can turn the porphis down if its too much. Black widow you can only open up so much but not as much as porphis

[@thetriggerman954]

@@user-un5my5bw4j I know all of that, I just let them gun Diva know it alls talk lol it would be a never ending battle with those type of guys. Another guy just message me and said that some dude in a garage painting a motorcycle tank says that the gun can only operate at 18 psi with glass results 🤣😫 So never mind the climate that the guy is in? Never mind the materials that the guy is in? One guy even told me that the guy warms up the clear in the microwave I have no idea who they're talking about but it's a tad bit different so I just let them talk I didn't even correct him 🤣

[@Saunders64]

@@user-un5my5bw4jTrue, and it sounds like you have a lot of experience spraying cars. However, a novice might overlap the spray patterns at the doors for example, and with a heavy load coming out of the gun, he could over-load an area and so cause a sag or even a run, especially if the clear dries too slow. Just saying the Black Widow is harder to cause a run, cause it is more forgiving with overlaps due to its slower application of the paint/clear.

[@lesliwells5433]

YEP DAT'S ME BRADA FROM ANOTHER MOTHER,?WITH THESE 4 GUNS I SHOULD BE ABLE TO PERFORM ANY TASK?

[@thetriggerman954]

Nooooo go back to lower caps 😭😭

[@EJ1James]

appreciate this video bro its nice to get back 2 back videos!!!!

[@thetriggerman954]

Thank you James. First one is an oldie if you can tell by the hat 🤠 I appreciate you man 💪🏼

[@EJ1James]

@@thetriggerman954welcome Trigga I don’t even notice the hat 😅, this was one them ones in the chamber

[@thetriggerman954]

@@EJ1James yes sir, got a 30 round mag ready to go 😜

[@Mr1fingersalute]

2 guns 1 cup lol, you know what that reminds me of right? did you do that on porphis ? (pardon the pun) 😂 And don’t let anyone give you s*** about getting good coverage on your first coat of base, I was at it for 27 years and that’s the way it’s done son!💪🏻 This ain’t “the lab” lol P.S. They want $280 for that gun now🤨

[@thetriggerman954]

Damn seriously $280 🤯 crazy. They better not start to price themselves out of the game. And yeah man 2 guns 1 cup is a spinoff of the classic 2 girls 1 cup 😮😮😮😮😮😂😂😂😂😂

[@jamalbrown5726]

Let's see how he like it when the FEDS say take that take that take that

[@thetriggerman954]

Lmao 🤣🤣🤣 NOooooo Not Diddy. Diddy do it? 😱

[@41maddriver]

What's Diddy going through is no laughing matter just thank God that's it not you cool video blackman may God continue to bless us

[@DennisCrissSr.]

BTW, whats your side kicks name that comes in talking ?

[@thetriggerman954]

That's the Trigger Troll

[@Mikefngarage]

the porphus has way better transfer efficiency and lower pressure capable. IMO that is always better. But both god guns.

[@thetriggerman954]

Yes sir Mr Mike, both great guns. But the Porphis got his ass 🤣😁🏆

[@TheIrvingsylva]

How long between laying down base did you scuff with the 2000k?

[@thetriggerman954]

@@TheIrvingsylva like 10 minutes

[@damensutherland7081]

Pressure fed are underated

[@thetriggerman954]

I haven't used one since 2010 out worked good,. I was painting boar's head 18 wheelers need that sucker

[@lesliwells5433]

I THINK PORPHIS IS BETTER ITEMIZATION, AND FASTERFOR AS PRICE,AUH I DON'T ❤ KNOW

[@thetriggerman954]

Smart man Lesli 💪🏼

[@lesliwells5433]

okay,porphis prd 717 vs.,iwata lph400,sagola 4600,iwata lph80,with these guns i should be able to perform every task?

[@thetriggerman954]

Every task 😎

[@anthonygallegos5198]

Black widow 👍🏽

[@thetriggerman954]

🤔

[@timhudson8958]

The black widow looked like a more even coat with finer atomization.

[@thetriggerman954]

Then the black widow is the gun for you my man 💪🏼

[@Snip59]

Black Widow has a lot of over spray not great for the DIY spraying in the garage one thing i want is less over spray.

[@thetriggerman954]

Shit I'm in a spray booth and I want less overspray too😂

[@eddiegunks1]

What cup system do you use? thanks

[@thetriggerman954]

@@eddiegunks1 devilbiss Dekups system

[@joshuaphegley3766]

I think the Porphis is going to win.

[@thetriggerman954]

🤔

[@lesliwells5433]

NOW WHAT WE HAVE HERE,IS A BATTLE BETWEEN VEVOR,AND PORPHIS, HA HAH,DID YOU CATCH THAT TRIGGERMAN WHAT WE HAVE HERE,HA HAH😅😅

[@thetriggerman954]

Lmao using my line on me " now what we have here" 😱😂

[@nickcrill7718]

Porphis looks like the winner to me!

[@thetriggerman954]

Facts

[@robertdeleon588]

Great 💯👍. I.d like to buy the two porhis

[@thetriggerman954]

Both split nozzles are good but I like the 717 more

[@lesliwells5433]

BUT,CAN IT HANG WITH THE OLD TRIED AND TRUE KING VEVOR, HAHAH😂

[@thetriggerman954]

🤔 good question 😂

[@payseismuertos]

Que el próximo desafío sea.....campeón contra campeón.... Vevor vs Porphis

[@thetriggerman954]

That would be like Mike Tyson fighting peewee herman 😂🥊🥊

[@r.guardia9107]

Wow, you’re a great painter. The clear is smooth as it can be. 👍 What brand of clear is this?

[@thetriggerman954]

Thank you Sir. The clear I use is AM-Tech product by ProsPray there is a link in the description in case you wanted to check it out. 💪🏼

[@r.guardia9107]

Thanks for the information. Your channel is very informative. Will you be doing a video on the newer Iwata Ls400 Series 2?

[@thetriggerman954]

@@r.guardia9107 you're more than welcome. I might be doing one in the near future. Right now I still have a out 6 spray guns from different companies that I have to demo for them. Trying to catch up 🥹 lol

[@georgegeorge7847]

No trickery, just triggery. I’m going with the Triggerman Edition, that thing throws and flows.

[@thetriggerman954]

Exactly 😂💯 just triggery I like that 😁 you're a smooth one 😎

[@ukaszbas9758]

Hi can You do one cup two guns challenge devilbiss gti pro lite vs porphis prd?

[@thetriggerman954]

@@ukaszbas9758 sure, I have a long list of requests but I'll add that into the line up 😉

[@ukaszbas9758]

@@thetriggerman954 thank you greetings from Poland ;)

[@ptours99]

black widow for the win

[@thetriggerman954]

🥹😲

[@ptours99]

@@thetriggerman954 after further review i agree but it was dam close nice work also what are your trigger settings for clear three turns out or 2 1/2

[@thetriggerman954]

@@ptours99 2.5 out and yep you were very close. Only 2 options so 50% credit 😎🤣💪🏼

[@chevyharper5681]

Thank you for this video

[@thetriggerman954]

You got it my man. Thank you for watching ❤️

[@mikhailSRT4]

717 is looking better and better from all reviewers I've watched seems to be worth the money

[@thetriggerman954]

I think so

[@jarrodluetkemeyer1709]

Black widow for me

[@thetriggerman954]

🤔

[@jeremyr7147]

Porphis looked good, in by the buzzer.

[@thetriggerman954]

⛹🏼‍♂️🏀

[@johngraves1216]

porphis lookin nice

[@thetriggerman954]

😎🙌🏼

[@av8tordan514]

Black Widow. Because I can get at the corner store.

[@thetriggerman954]

Convenience gotcha 💪🏼

[@ANDY-we7mr]

Dam triggerman got it wrong mate not about the gun triggerman its the end results mate that job mate is slick trigger love to see a shoot out your top 5 guns mate sagola extreme aqua 4600 1.3 and Sata jet and that porphis gun 🔫 😊

[@thetriggerman954]

SATA , Sagola are in a different weight class. That's like Mike Tyson fighting Floyd Mayweather 😂 not a fair fight.

[@robertwalter6688]

Triggerman to be honest with you I sprayed with the black widow, and I’m waiting on my porpoise to come but in the video they really look both the same but we had to leave it up to you because you’re there alive and in living color so porous it is

[@thetriggerman954]

They are very close, that's why I said if you have either gun then you're still good to go. But I think the Porphis is a better deal/gun for the ease of spraying experience as well as a great finish. Plus less overspray which we all can use.

[@SUPERMAN768284]

Good videos on painting, what kind of air fitting did you use to stop the air gauge from spinning

[@thetriggerman954]

Thank you man this is what I used amzn.to/3UmKuRj

[@SUPERMAN768284]

Thank you, keep making the good painting videos

[@thetriggerman954]

@@SUPERMAN768284 you're more than welcome. And will do

[@blueovalracing1582]

Man is hard to tell it looks like neither gun gave you any trouble smooth motion on both of the spray guns it almost looks like it’s a draw I could flip a coin I guess I don’t have one I flipping 9 V battery positive side on the left black widow one by the 9 V battery flip

[@thetriggerman954]

🤣 yea it's very close. But in person I can see the Porphis has slightly less peel. And also the ease of application puts it over the top.

[@Snip59]

The more the talk the better cheers

[@thetriggerman954]

I know most of you guys appreciate it. But for the 10% that want less talk thru can go over to Paints By Trigger 😜 I want to help everyone learn even if they don't like my voice. 🥹😱😂😂😂

[@ErikisOfficial]

Why do nibs always get in the first coat of base but non or almost non in the 2nd 🤔

[@thetriggerman954]

Dirt Fairy Trickery 🤷🏽‍♂️😂

[@ErikisOfficial]

@@thetriggerman954 🤠man I gotta tack that hood soon. Won't fit in the tent I don't think😄

[@ErikisOfficial]

@@thetriggerman954 been thinking how to reduce the dirt I know wanna fall on it

[@greghelmbeck9516]

Porphis

[@srautollc6831]

Another great video trigger. Do you have a affiliate link for the porphis gun? Was going to buy one.

[@thetriggerman954]

Thank you man, unfortunately no they don't give me anything for these guns. 🤷🏽‍♂️🥹 Lol but I think you'll like the gun.

[@larrydurr6064]

Black Widow is the winner

[@thetriggerman954]

🤔

[@chriscurry236]

Triggerman, I can't choose 🤔, gotta let you choose man! Great video as always 👍

[@thetriggerman954]

Lmao c'mon Chris 😂 I got you man that's you for watching. 💪🏼

[@asksteevies4941]

The one that says Trico man on it obviously😂

[@thetriggerman954]

4sho 🤜🏼🤛🏼 🤣🤣

[@phillipgonzalez5407]

Trigger man i have a black truck that I want to paint. Can I just DA it with 400 add spray my base coat or do I need to put a primer or a sealer first?

[@thetriggerman954]

Depends how bad the old paint is. If it's not pealing and not to bad you can base it and clear it without priming or sealing

[@phillipgonzalez5407]

The clear coat is just peeling from the Sun what should I do after I d A it what would you do?

[@thetriggerman954]

@@phillipgonzalez5407 You can either 2K prime it or you can seal it right before you paint me personally I like to 2K prime then sand the 2K primer flat and then go directly with my base coat over the 2K because you get a flatter finish once you apply sealer to sealer will have a little texture which then would give you more texture in your finish.

[@phillipgonzalez5407]

@@thetriggerman954 ok so sand the 2k primer with 400 ?

[@thetriggerman954]

@@phillipgonzalez5407 yes 400 is good. You can start with 320 and finish with 400 or just use 400. But it is best to finish with 400.

[@eulicerichardson299]

Black widow

[@thetriggerman954]

🤔

[@anthonygallegos5198]

Porphis I believe I got the black widow haven’t used it yet tho can’t wait but I like that porphis gun tho

[@thetriggerman954]

Man you gotta use the guns before you buy more 😂😂

[@reyjr3608]

I think im gonna get the porphis..may i ask your settings on fan, fluid and psi/bar on this porphis spraygun?just to be sure.. amazing results ..😄👍

[@thetriggerman954]

I would have to watch the video again to listen to the settings 🤔🧐🤨 or you could watch it and get the settings. 🤦🏽‍♂️

[@reyjr3608]

@@thetriggerman954 sorry..my English not good..but I try again.thank you..😄👍

[@thetriggerman954]

@@reyjr3608 😅😅

[@reyjr3608]

@@thetriggerman954 by the way,,do you think this is a faster spraygun or the slow and steady one?.I can't decide which porphis should I take for clear gun.. what would you recommend?

[@thetriggerman954]

@@reyjr3608 it's in the middle. Not the slowest and not the fasted gun either. I think it's a great gun for must painters beginner or advanced.

[@maxmeyer74]

What's the size of the Porphis fluid tip Trigger Man?

[@thetriggerman954]

This gun is a 1.3

[@robmehner7788]

The BW is a Taiwanese gun Trig. IDK man, if there isn't that much difference then I know which one I'd buy. That struggle is real.

[@thetriggerman954]

🤔 hmmm decisions decisions lol

[@ANDY-we7mr]

I think the black widow mate could be wrong triggerman hows that you don't put a blend additive on there mate before the base when you do a blend 😉

[@thetriggerman954]

Don't need one mate. I like less work but more work.

[@jiujit49]

That's cool I de nib too ,ty

[@thetriggerman954]

Yes sir 💪🏼

[@arvizu619]

Great video! Would you recommend a Phorpis 717 for a diyer in garage for the over sprayer? Or I can get an Iwata lph400 used from ebay? What would you be your recommendation? Both same price

[@thetriggerman954]

If you can get an lph400 in good condition. Go with that. Man I've used my Iwata daily for over 15 years and that thing still is my go to and great with overspray.

[@arvizu619]

@@thetriggerman954 thanks for getting back man! I’ll look into an LPH. Have you seen the new LPH replacement called Iwata Wider4L. They are going for same price as used LPH400s definitely worth a test 🙏🏼👍🏼

[@thetriggerman954]

@@arvizu619 I've seen those around in don't think it's nearly as good. I'd just get the lph400 and be on the safe side. That wider4L is the same price as a used LPH for a reason.

[@arvizu619]

@@thetriggerman954 makes sense.. what cap would you say its the best all rounder for that lph silver or orange? Also 1.3 or 1.4 to do both bc and cc

[@thetriggerman954]

@@arvizu619 I like the silver as an all around especially for clear. I have orange and purple but silver is on my gun 24 7. And I run a 1.4

[@Snip59]

few specks of dust in both but that is normal so i would guess a cut and buff for sure.

[@thetriggerman954]

Yes sir, that's the problem with spraying flat any spec will show. Spray peely you see is nibs but then the Internet says you can't paint 🤷🏽‍♂️😜 red pill or green pill you decide 😂

[@Snip59]

True indeed it's hard and you are a professional better then us not easy at all love your work

[@richarcruz7843]

Porphis all day 💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽

[@thetriggerman954]

🤔 yes sir

[@user-gr8zx4rr5x]

Does porphis have a US distributor? I tried to get one and was told I couldn’t get one until June. I need the 1.3 HVLP 😢

[@thetriggerman954]

Everyone is buying them here in the US. Not sure about distribution but I know guys purchased it off their site

[@dwaynebrooks5916]

Vevor

[@thetriggerman954]

🤔

[@luxe-kustoms]

So Trigger, Do a real head to head.... Black Widow V1 to the Porphis-PRD-717, Kinda the same style gun.... Sata Clones... But the Porphis-PRD-717 does win this one... Yes i changed my name...Peace - Bama

[@thetriggerman954]

You changed your name? I see the new logo up there. What in the heck is going on there? Luxe Kustoms? Sounds 🔥🔥 I don't own the first black widow 😭

[@Motivateminds333]

Man way you talking sounding like the porphis taking it

[@thetriggerman954]

🤔😉😁

[@Gegsite]

That Porphis is make too good orange peel is better than the OEM, so it is actually not good :) Also I noticed the the HTE has more fisheyes or nips but it is hard to say what is it on camera. Hint: The PRD is very alike to a sata RP

[@thetriggerman954]

Whatever you saw 👀 I didn't see. The gun might resemble a SATA RP but it doesn't spray like an RP I have every Sata RP from the 3000rp up to the 5500rp and it sprays nothing like the RP it only looks similar to it. Spray on brother 🤙🏼😎

[@Gegsite]

From 12:22 as you go down what I mean. Super guns for sure! Awesome video! Good job.

[@thetriggerman954]

@@Gegsite might be a few specs of dust not sure. Definitely no fish eyes. You might be watching on you 70" flat screen TV I'm on a small phone 😂😂 thank you for watching brother. Always appreciated 💪🏼❤️

[@Gegsite]

@@thetriggerman954 I watch on phone, but you can zoom in now on youtube as in the photos you do in the phone. P.S.: I have a small 43". LG yet, will go for 65"

[@thetriggerman954]

@@Gegsite 😂😂😂😂 I think I have a 50" so I got you by 7" 😜

[@blakereiter7418]

Black porphis🤣🤣🤣 looking for a affordable clear gun. Been getting used stuff trying to get my arsenal up to make some moves. You think it's worth it or would you keep saving?2 guns one cup eh🤣🤣 i see what you did there trigger.

[@thetriggerman954]

Oh you caught that aye 😉 I mean it's up to you man. If you're getting used stuff that's in great shape and for a good price then you're still winning.