It's like Ash and the slap chop guy had a love child
@velocitydreamer6 ай бұрын
Kickass marketing right there!
@lucasblanchard476 ай бұрын
Yay for Zac. Boo for a small rubber piece that will inevitably fall out and have to be replaced again and again.
@SilencerCo6 ай бұрын
As long as the o-ring is installed in the channel properly it will last a long time. The package also comes with an extra just in case and if you lose that one you can buy similar o-rings at the local hardware store for about five cents a piece. It's also worth noting the charging handle functions fine without the o-ring to charge the firearm.
@lucasblanchard476 ай бұрын
@@SilencerCo what I heard is “the rubber seal is not necessary” haha
@SilencerCo6 ай бұрын
@@lucasblanchard47 If you don't care about gas in your face, it's not.
@JefF-rv7gp6 ай бұрын
I like mine.. A lifetime supply of spare rings cost $4 in Grainger for 100 of them. IF I can burn through 100 of them, I'm doing pretty good !
@JackBNimble-gz6mb6 ай бұрын
By far the most legit, and hilarious, infomercial I've seen....well, ever? 🙂Love it!!!
@fomocore6 ай бұрын
Keep your old charging handle you might need it later
@GigaChode6 ай бұрын
I'm waiting on my Velos to get backfilled and I might cop it!
@prestonlyle6 ай бұрын
I'm not gonna lie when I clicked on the link for this video in my email Zac was the last person I expected to see but holy fuck am I so glad to see him
@dannypierce14266 ай бұрын
When my gas hole gets stopped up, my stomach hurts until my gas hole finally releases it and then I feel better
@Viperjjr6 ай бұрын
😂😂😂😂😂😂
@CharlieHopkins-p4i6 ай бұрын
FKn Awesome ad and even better, great charging handle as I too do not enjoy a hotshot from a Gashole!!! Keep it up Zac and team. Good stuff!!!!!!
@Zel_eo6 ай бұрын
Had the OG version of this, the O ring fell out after charging it like 3 times. Maybe they fixed it? Kinda doubt it. Newer Gas Busters by PRI are cheaper and work; and Griffin gen 2 CH works even better. SC makes some good cans but this one is a no go for me...unless they fixed the O ring.
@SilencerCo6 ай бұрын
Yes it is an updated design. The original had roll pins that could wiggle loose under recoil. These have been replaced with screws in the current version and are rock solid. The o-ring seal is also solid and will last a long time, but the package also comes with an extra just in case and if you lose that one you can buy similar o-rings at the local hardware store for about five cents a piece.
@Zel_eo6 ай бұрын
@@SilencerCo Good to hear! You guys make some good stuff, have an Omega 36m on the way in fact, only had issues with the old version of the CH so far. Wish I would have waited for the second addition lol. Oh well, keep on keep'n on.
@babarama2836 ай бұрын
Doesn't this device have poor reviews cause the pins fall out? Have you improved the design?
@SilencerCo6 ай бұрын
That is correct. The original had roll pins that could wiggle loose under recoil. These have been replaced with screws in the current version and are rock solid.
@Glocktard6 ай бұрын
@@SilencerCowill you warranty my original then?
@joelhall20426 ай бұрын
So happy to see Zac!
@brenttipton63336 ай бұрын
Best Gun part ad In recent memory!
@keithsimpson1476 ай бұрын
$114.00 for 6 bucks of aluminum is a bit excessive
@bradcantey73546 ай бұрын
After the first failed attempt and bad reviews, you'd think they'd give a discount code for the first month or two until these have proven themselves in the marketplace. Definitely overpriced.
@davisjames84846 ай бұрын
@@bradcantey7354 they redesigned it, and it will never be cheap merely due to the machining time needed.
@controlledchaos88515 ай бұрын
When that Velos 762 coming out ????
@corndogegan6 ай бұрын
Haha, this was very funny. Well done!
@BigBoyJudge6 ай бұрын
I love funny sales men. I’ll take 12!
@GameOverSqueeze6 ай бұрын
Is this an upgraded design? I have read a lot past reviews claiming that seal at the bottom falls out easily.
@SilencerCo6 ай бұрын
Yes it is an updated design. The original had roll pins that could wiggle loose under recoil. These have been replaced with screws in the current version and are rock solid. The o-ring seal will also last a long time, but the package also comes with an extra just in case and if you lose that one you can buy similar o-rings at the local hardware store for about five cents a piece.
@pm3496 ай бұрын
OUTSANDING !!!! Zac for VP!
@aidenfinney31066 ай бұрын
Does it still fall apart after a couple hundred round
@SilencerCo6 ай бұрын
It sure doesn't! The original roll pin design was quickly updated to use screws which are rock solid. If you have a previous roll pin version hit up our customer service and we will get it swapped out with the new one!
@UrbanTiger746 ай бұрын
(Nods in appreciation)
@GobblerK5_2WR0806 ай бұрын
Nice marketing video...very entertaining. Almost led me to placing an order for one of those...😁 But do I REALLY need it?
@bbaz67296 ай бұрын
Radian has had a product like this for years.
@SilencerCo6 ай бұрын
Nobody on the market has a Charging Handle that utilizes an O-ring to seal off gas from exiting the space between the handle and lower which is where the majority of gas exists. Try any other gas defeating charging handle side by side and you'll quite literally feel the difference.
@corywatterson75606 ай бұрын
One more point of failure. Watch the grizz hunting vid where a stuck primer in the action about caused 2 deaths......(O ring piece in the bolt carrier)
@philiphudson8806 ай бұрын
I got 99 problems but a Gas-Hole ain’t one.
@georgemartinez39966 ай бұрын
That was funny & entertaining.
@YZFoFittie6 ай бұрын
Wait, isn't this the dude from Hoonigan?
@matthewbartley27466 ай бұрын
Nah he's just our Hooligan. 😂
@YZFoFittie6 ай бұрын
@@matthewbartley2746 hahahahaha fair enough...
@discodougie26336 ай бұрын
shamwow flash backs
@J_D_Rambro6 ай бұрын
LMAO
@jaredandrews3796 ай бұрын
Epic lol
@carlmoritz67536 ай бұрын
very over priced
@jaredandrews3796 ай бұрын
@carlmoritz6753 okay.
@davisjames84846 ай бұрын
@@carlmoritz6753make one cheaper and ill be your first customer.