It's So Easy To Get This Wrong | Wiring Harness Branching [

  Рет қаралды 52,840

High Performance Academy

High Performance Academy

Күн бұрын

Пікірлер: 32
@hpa101
@hpa101 3 жыл бұрын
🦸‍♂ Building a fast car? Get $400 OFF the all inclusive VIP online course package deal: hpcdmy.co/vipy74 🔋50% off your first wiring course! Get the knowledge and confidence you want. Branch out and enrol today: hpcdmy.co/offery74 0:00 - Branching is Hard, This Is Why 0:21 - Our Aim 0:55 - Between Branches 1:07 - Branch Points 1:23 - 2 Most Common Tasks 1:42 - Branch Example 2:38 - Step One: Gathering Wires 4:28 - Lay-up Design Notes 5:51 - Step Two: Securing Branch Sections 7:07 - Step Three: Branch Orientation and Strain Relief 8:32 - Kapton Tape Flexibility Notes 9:10 - Booting Notes 9:34 - Bare Branch Example Takeaway 10:13 - What's next?
@Diamondsintherubble
@Diamondsintherubble 3 жыл бұрын
You guys have been so helpful on my automotive journey. I’ve been a bit slow on wiring my car but I’m excited and even ready to take it a bit further by engineering my own fuse box. It would make the power source much simpler than having 2 split fuse boxes that my car comes with factory, and I could treat it like a pdm. I’d like to produce a factory or better quality harness before my project is sold
@BrainDeath89
@BrainDeath89 9 ай бұрын
Now I've booked the Hpa VIP, very nice. Greetings from Germany!
@hpa101
@hpa101 9 ай бұрын
Welcome to the VIP crew mate! Hope you enjoy years and years of value from the current and future content - Taz.
@gammalight1312
@gammalight1312 3 жыл бұрын
This is priceless, thank you!
@hpa101
@hpa101 3 жыл бұрын
You're very welcome!
@SERGMOTIVEGARAGE
@SERGMOTIVEGARAGE 3 жыл бұрын
I’m still unsure about what the actual job of the kapton tape is for. Other then helping to provide strain relief why is it used in place of tradition electrical tape? I heard the part about making it easier to service wires if needed and to prevent the adhesive of the molded boot to settle on the wires. But is there other reasons why this tape is used?
@JosephHHHo
@JosephHHHo 3 жыл бұрын
Never use duct tape on duct work, never use electrical tape on electrical work.
@TheSteelArmadillo
@TheSteelArmadillo 2 жыл бұрын
Electrical tape is not a permanent material in the conditions typically seen in an automobile; the glue will release and the vinyl will stretch, roll, and otherwise distort considerably, making it very unsuitable as a strain relief.
@mikem5475
@mikem5475 2 жыл бұрын
@@TheSteelArmadillo this happened to my radio harness cut and resolder job, all the electrical tape was unraveling. No issues yet but it looked like a nightmare
@mikem5475
@mikem5475 2 жыл бұрын
Part of my solution is to zip tie the electrical tape around the wires. This prevents unraveling and provides a little more bulk that allows more margin for chafing against metal things
@Symbolizer21
@Symbolizer21 2 жыл бұрын
@@TheSteelArmadillo some electrical tape will also become brittle with time
@neilr1556
@neilr1556 3 жыл бұрын
Lovely and timely
@mrsideperson8405
@mrsideperson8405 3 жыл бұрын
Finally !! Thank you.
@hpa101
@hpa101 3 жыл бұрын
You're welcome!
@antialias4205
@antialias4205 3 ай бұрын
ty ty
@BUZDRIFT
@BUZDRIFT 3 жыл бұрын
I think he nicked one wire in the sensor branch?! Maybe?
@rimmersbryggeri
@rimmersbryggeri Жыл бұрын
Is it normal for a coolant temp sensor to have continuity between the wires when you measure at the sensor connector? In none auto applications a tempereature sensor may have a resistive divider at the ecu side but I dont imagine an automotive system requires the level of accuracy that would require 4 wire measurement so I assume the continuity is due to some break in the wires but always good to get a second opinion.
@IngeBall
@IngeBall 3 жыл бұрын
Newbie here. Pros/cons kaptontape vs lacing yarn used in avionics ?
@hpa101
@hpa101 3 жыл бұрын
They are used for 2 different purposes - Taz.
@BjornFSE
@BjornFSE 3 жыл бұрын
nice
@pbAdpcustoms
@pbAdpcustoms 3 жыл бұрын
How do you tell which sensor is which when using the same color wire for all the sensor
@JosephHHHo
@JosephHHHo 3 жыл бұрын
It's peeling off a concentric layer where the sequence is explicitly defined so he knows the next group is a certain sensor and so on for the group after.
@pbAdpcustoms
@pbAdpcustoms 3 жыл бұрын
@@JosephHHHo but one layer had 4 or 5 of the same color wires. I understand concentric twisting and everything but it's having so many of the same color wires. I like to be able to tell what wire is what just by a glance
@hpa101
@hpa101 3 жыл бұрын
@Peyton instead of trying to commit a bunch of random colours to memory it's easier to just check your documentation like Zac does, and then he will check the ident tags, which is exactly the same as checking fully coloured wire and associate colour bands. What he has done in the meantime though, is saved a ton of time and money on not having to source, stock and sort 100 different colour options and instead can bulk buy white, generally at a bulk discount to boot. Both options will get you there, but that is just a little insight into things, hope it helps. It certainly can look intimidating if you assume you're just plucking things out of thin air. Check out our video where Andre visits Renvale for a bit more on this and other wiring topics: www.hpacademy.com/blog/what-goes-into-a-motogp-formula-1-wrc-or-formula-e-wiring-harness-tech-talk/ - Taz.
@patofdubois1
@patofdubois1 3 жыл бұрын
Hat is the tape you use where you branch off?
@hpa101
@hpa101 3 жыл бұрын
Kapton is the brand - Taz.
@mr.m6691
@mr.m6691 3 жыл бұрын
I'm still a bit confused on how he will identify each cable?
@hpa101
@hpa101 3 жыл бұрын
Ident tags, labels, documentation, just like you would if the loom was full of different coloured wires - Taz.
@MuffinStomper
@MuffinStomper 16 күн бұрын
5:57...nothing to see here 🤐
@neffk
@neffk 3 жыл бұрын
Typing as a world-renowned video production expert and world-champion watcher of the KZbins, please allow me to provide some irritating feedback. Something about this video is super super annoying. Even watching this video at 2x speed, it drags on and on. Most of the video is so god-fucking-damn boring but tantalizing because of the excellent reputation of past HPA videos and the visuals of the wire harness, which looks unusually good. Even the characteristic color of the kapton tape is doing a better job selling the video than the forever-long lecture. Also, the interesting part is so fast you can hardly see what is going on. Even at 1x it's time lapsed to the point of not being smooth video. TL;DR this should be a 2 minute video of applying kapton tape with a voice over for the (valuable) content. It's a stretch limo when all we want is an Uber.
@hpa101
@hpa101 3 жыл бұрын
haha cheers for the feedback delivery mate =) This is taken from a course material, rather than the sole focus being on it as a YT release, and you're not wrong but we do like to cover all the bases in our explanations. We do always take feedback onboard though and love to hear it, good or bad, so I will pass this onto the team here too. Appreciate it - Taz.
Better Than OEM? | Why Do We Boot Transitions For Motorsport Wiring?
18:12
High Performance Academy
Рет қаралды 52 М.
What Are Race Spec Circular Connectors? | Motorsport Connectors [#FREELESSON]
28:11
High Performance Academy
Рет қаралды 41 М.
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 11 МЛН
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН
Star Point Grounding | Earth Ground/Earthing
40:51
High Performance Academy
Рет қаралды 65 М.
Concentric Twist - Insanely Overspec Wireharness Build on Classic 964
30:08
Islandworks Sweden
Рет қаралды 46 М.
What IS Concentric Twisting? | Motorsport Wiring [#TECHTALK]
25:38
High Performance Academy
Рет қаралды 204 М.
Re-Wire Your Whole Damn Car - How To Do It Correctly & Inexpensively
19:10
008: CONNECTOR BULKHEAD - PART 1 - “THE BASICS”
21:44
Maven Performance
Рет қаралды 144 М.
You Don't Need 'PRO' Level Wiring....Do You?
56:36
High Performance Academy
Рет қаралды 81 М.
Building a Mil-Spec Harness Part 1
33:58
The Z Garage
Рет қаралды 13 М.
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 11 МЛН