J̶E̶E̶P̶ JAGUAR XJ 4- Link Setup

As the 4 Link goes into this J̶e̶e̶p̶... I mean Jaguar XJ, things are looking more and more put together for the Holy Grail build!
*
onX Members Vote for Us HERE: www.onxmaps.co...
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout: www.onxmaps.com/
#onXbuildchallenge #onxmaps #bleepinjeep #bleepinholygrail
*
Like this video? Here is the Whole Series:
onX JAG Build Part 1 - Offroad Meets Luxury: • Our Next Build is Offr...
onX JAG Build Part 2 - JAAAAAG: • JAAAAAAAAAAG
onX JAG Build Part 3 - Calling Out My HATERS: • Calling Out All 1st Ge...
onX JAG Build Part 4 - Cutting up the Truck: • There's No Turning Bac...
onX JAG Build Part 5 - Dodge Dominates Rock Crawling: • Old School Power: STOC...
onX JAG Build Part 6 - 1st Gen Dodge No More: • 1st Gen Dodge No More...
onX JAG Build Part 7 - I Cut Into the Gas Tank: • Things get SPICY with ...
onX JAG Build Part 8 - What Will $6500 Buy Ya: • What Will $6,500 Buy Ya?
onX JAG Build Part 9 - Ian Visits the BleepinJeep HQ for OnX: • @bleepinjeep's Wild Ja...
onX JAG Build Part 10 - Jag on Dodge: • Building Our Jaguar Mo...
onX JAG Build Part 11 - How To Set Up Leaf Springs: • Why Leaf Springs Suck ...
onX JAG Build Part 12 - Make Your Own Engine and Transmission Mounts: • Make Your Own Engine a...
*onX JAG Build Part 13 - J̶E̶E̶P̶ JAGUAR XJ 4- Link Setup: • J̶E̶E̶P̶ JAGUAR XJ 4- ...
Get 20% OFF ONX GPS Maps: Enter code “Bleepin20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.co...
*
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on KZbin: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*
*This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

[@MischiefMakerTV]

I’m so intrigued by this build - specifically, what the visibility will be like for the driver between the seating position, length of that hood and the height of the rig 👀

[@bleepinjeep]

Hollie, it has a sunroof so you can stick your head out the top! We are thinking A Head.

[@christophersells9146]

​@bleepinjeep that's The "spotters Hole:..just have Josh stand in the sun roof and watch out...for things...

[@autotek7930]

Bleepin jeep and my morning coffee. I could do this every Sunday

[@anthonypaules7893]

Fury Road, I like it.

[@pacificrider08]

If you guys pull something together that looks awesome, runs, and drives through the different terrain challenges without breaking down, you guys already are winners because the way you guys are doing this is the most difficult than the other teams. Good luck, guys! By the way, you guys and your build remind me of the Mad Max world!

[@bleepinjeep]

No doubt, check out the most recent video!

[@1a1u0g9t4s2u]

As the saying goes..."Three left turns make a right turn". Your build still may turn out to be a Cinderella in the making. Glad you guys are charging ahead full steam. Thanks for sharing.

[@TheBeardedJeeper]

Beauty in the beast?

[@freeidaho-videos]

Best lunch lady and lunches in the whole ONYX challenge.

[@thousandoaksauto1696]

Hey Matt & Josh, "great looking rig you two are building there". Matt you always come-up with an engineering marvel of ideas! "Wack the back end of a Toyota frame & Metal Glue (MIG) it to the rear of a Dodge frame"- WOW!!!

[@BlackAndBlueGarage]

I lose sleep thinking about weird builds. This challenge is heaven 😌

[@seriousmechanicing]

Appreciate the level of detail you’ve covering on this build. Way more comprehensive coverage than the S10 last time.

[@EvanMoon]

JAG - UA - RRRRRRRRR

[@bleepinjeep]

Thanks, i wish I could cover every detail even more but there is just too much to accomplish and not enough time.

[@MichaelSmith-jv7zm]

Wasn't that Cheating Colt,?

[@seriousmechanicing]

@@MichaelSmith-jv7zm yeah, it was fun to see the S10 build but this is next level.

[@denzilt.ockerman8291]

Josh, have you been told you look a lot like Kerry Earnhardt. Keep up all the great work trying to educate us on thinking outside of the box when fabricating something unique. Please be safe in your adventures in and out of the shop.

[@scottburrow8717]

Really can’t wait to see this thing done and driving. Going to be EPIC!!!

[@clintalexander6809]

You would fit in with with the people in crawfordville florida. Every Type of vehicle you could think of is jacked up With a 4×4 . I've seen a Mercedes with a 4 / 4 kit I've seen B.M w, I've even seen a 1970 Volkswagen beetle jacked up.

[@kimberlyvaughan3430]

Don’t feel bad Josh, I can’t do trucker donuts either. Haha. God Bless 😊

[@steven.h0629]

Trucker doughnut approved, truckers hitch knot _way before_ ratchet straps 👍😎✊

[@bradbowers]

If you squint! It's mint! Fun build!!!

[@wrenchestoadventures]

I'm sure someone has mentioned it or maybe they did. But I'd be boxing in the frame if I was them. It would really help stiffen up the frame for the rear 4 link.

[@coryingram3288]

This is like watching an episode of junkyard wars!

[@bleepinjeep]

Feels like it too

[@t_n8435]

New name alert!! The Juggy!!

[@travismerrix4391]

Why not weld rear doors shut shave handles and move the wheel wells forward 10 or 15” for a more ideal wheelbase. Sounds like it’s getting a flat bed anyways…………… love the build can’t wait to see this thing tear the trails up

[@bleepinjeep]

believe me we thought about it but the whole point from the beginning was to have a 4 door rig with the capability of carrying 3-4 people along with gear.

[@freeidaho-videos]

No more Bleepin Matt, now it is Matt Hatchet.

[@fatcat3211]

I bet if Matt got 1/24 scale plastic model car kits of a Jag and Dodge truck and built that first, this build would've been a lot easier.

[@LL-vw7oe]

I built a 72 jag 4x4 back in the 90's. Used a 78 blazer chassis. Good luck guys I like where your going with the build... but lose the white paint lol.

[@bleepinjeep]

Ohh you'll like the paint just wait!

[@beadblaster9508]

What a beast. Long live the Brontosaurus.

[@nicholasgann2419]

Noice!

[@texasrockoutlaws75]

That is going to look so bad ass

[@papajonwj]

Also, thank you for finally giving me a name for the way I’ve been tying my straps all along lol. The trucker donut.

[@bleepinjeep]

Any time!

[@danmellette3189]

Nice JeeGuar 🙂

[@719Mitch]

Going to be huge!

[@EvanMoon]

I am very impressed, the idea of a wire used to make a template, very genius, my friend

[@TheBeardedJeeper]

I agree I thought it was a great trick for sure

[@Kiki-Kauai]

The first thing I said when I saw this car was it’s like a long boat. I remember someone I knew having one and it had lots of room for activities. Lol. Like hauling a bunch of teenagers around.

[@jameskendrick573]

Josh that was hilarious ol flat matt about had a slpat on the floor and we ain't talking slag either 🤣 😂

[@jamesbigham9036]

Good morning I like the progress on the on X build. It will definitely be one of a kind that is for sure

[@javman03]

Yes! It finally has a fitting name! Its the Juggie! I love Juggies....

[@HarryCane305]

cool build!

[@TheBeardedJeeper]

This thing is a monster!

[@powershomestead87]

Love the build so far. We need more videos!

[@GarrettAdams-hf7kf]

hood stack it!!!

[@davidcadenhead8436]

This coming together nicely. It's as if it was ment to be. Looks some of the parts wants to be there. Keep up the great work

[@bleepinjeep]

Thanks 👍

[@kevinfoley7704]

Good video.

[@Garth2011]

Check checking in...I know you know but, the Toyota rear end has the same gears as the Dodge front end? This one is getting interesting...that is a long wheelbase for a "rock crawler" but I'm trusting you with the outcome. So nice to have a garage with the height and a lift.

[@bleepinjeep]

A couple videos back we used the front axle off the Toyota as well. I believe the PO said they were 5:13

[@Garth2011]

@@bleepinjeep Opps, I forgot.

[@jamesmeredith381]

At this point, I'm certain that point was a few videos back! Also you don't need to grind everything so clean to weld,because if you have enough heat it has to be purified!

[@trucksdoityourself1111]

If you ever need a 1 ton rear end we get them here at greens recycling every other time mostly ford's but we get chevy dodge sometimes just to let you know just incase have a great day God bless

[@StormbornJKU]

Super cool!

[@jeffmayo6002]

Y'all should make the bumper look like a mustache

[@benjy6358]

that thang gonna look badass..

[@bleepinjeep]

dang straight!

[@MissionRestomod]

Matt: “I’ve got a strong 4 inches”

[@TheTreadLife_]

Starting to be reminiscent of Robby Layton’s Limo

[@walterdodds3925]

What parts, all of them parts!.

[@shanewright6958]

Looking good 👍👍

[@darrinrebagliati5365]

It looks to my eye, thru your camera, that the exocage from the Toyota will almost fit the Jag body from a to b. Just noticed that as you were showing what you'd have to cut. I mighta cut in front of the xmember and behind the other mounts. The whole chunk would've come out easier, I think. Kinda wish I was there to help. I once had a 72 Challenger on the same frame.

[@bleepinjeep]

Pretty sure that yota cage is made of poop pipe but either way it would be way too narrow and not the look we are going for

[@nicholasgann2419]

Can I barrow the gooseneck hitch plate/setup? I’ve got a second generation holy grail build. That could use a turn over ball hitch.

[@bleepinjeep]

I'm thinking about putting it in my tundra

[@thunder_lloyd]

This thing could definitely be in the running for "ugliest but most functional" at SEMA 😂

[@bleepinjeep]

it'll be SEMI- pretty before its all done

[@kirksoutdooradventures]

Well I tried to vote for you guys again like I do every week and well it keeps asking me to sign up for the elite and won't let me vote. Stupid interweb

[@bleepinjeep]

Ya so there was a change in the voting process because of some bots or something and now you have to be a paid member to vote. Sorry about that. i'm gonna have to figure out how to explain all that in a future video.

[@kirksoutdooradventures]

@bleepinjeep I believe that about the bots. Huge difference in votes for some people. I have onx hunt... apparently, that's not good enough. It should be all onx users, not just the off-road. Stupid interweb robots 🤖 build is looking sweet! Can't wait to see it all finished and wheeling

[@lilnapsak1828]

HF will still Warrenty that jack stand. I highly advise to get rid of it as mine almost took my head off.

[@JonnyDIY]

He's right! Take them back! The new ones are much better. They actually have real full welds not boogers like originals 😆 I always use 2 sets of jackstands now

[@papajonwj]

Haha y’all got me laughing out loud at the mumbling subtitles

[@smokiesdiscovery4810]

I found your hood at my work place at greens recycling here in lc tn 3 weeks ago still have it here

[@bleepinjeep]

that must be the trunk lid, or whats left of it

[@smokiesdiscovery4810]

@@bleepinjeep yes I think that's what it is

[@freeidaho-videos]

140" wheelbase, it better have a teflon belly skid, or wheels on the belly. ;)

[@bleepinjeep]

Or have a 36” ground clearance 😁

[@clever_handle]

It’s all JEEP parts - Just Everyone Else’s Parts

[@timoldenburg2249]

WAIT!!! 😂😂😂😂😂😂😂

[@Jamisons_World]

21:51 - I mean it is a jack(‘s) stand 😂😂😂😂😂😂

[@jimmccabe801]

I like cummins powered 4x4 big tire jag pickups.

[@bleepinjeep]

Doesn’t everyone?

[@jimmccabe801]

@@bleepinjeep If they don't they better start.

[@jaxtraxtv]

wooooooooo!!!!!!

[@coachgeo]

Put the radiator in back?

[@bleepinjeep]

It’ll fit up front, we need the back for activities

[@scottsoffroad]

Onx won't let me vote for you now with-out signing up for elite membership. Sorry I just want to vote is all. Love your channel.

[@bleepinjeep]

Thanks, I think they are changing the parameters so that you have to be a paid member

[@JonnyDIY]

What will you guys do with this when done? Do they all get auctioned off for charity? 🤔

[@xTinBenderX]

24:35

[@Offroading1986]

Why didn't you put the Jaguar body on the Toyota frame?

[@bleepinjeep]

Jaguar massive, Toyota tiny

[@somebodyelse836]

Stretch the front clip

[@muddyWW]

Is josh wear Matt's shoes? Or did he take Matt's fashion style?

[@bleepinjeep]

He probably got tired of his shoe laces catching on fire too, lol

[@wtftolate3782]

Longer video's please... 45 to 60min

[@bleepinjeep]

That’s a lot of video, don’t know if I can talk that much 😄

[@larryalexander4833]

Good Sunday morning to everyone. Thanks for the video Matt. And a shared thought . Through everything we endure and our lifes walk in this evil world seek Jesus Christ in your heart and life for he is the answer through it all ✝️💪🙏

[@TripleXclown]

Wonder how much of that cage is getting reused for budgeting reasons..?

[@bleepinjeep]

Hopefully none but there’s good steel in there in the sliders and such

[@wreckleskelly]

Y'all talked about cutting it out longer than it would have taken to just cut it out. Get to work!

[@Stretch87035]

Just so you know, On X website won't let anyone vote unless they join and I'm not an off roader so I ain't joining.

[@docbill224]

XJ-PU?

[@bleepinjeep]

Pick up, yes!

[@MarkoMygun]

Hey Matt just went to vote and it says you have to be a premium or elite member to vote this is some bullshit man

[@bleepinjeep]

I know, they changed it up mid competition. Apparently there's was too many bots voting 🗳. Not sure if this will be back or if that's the new norm...

[@silentjde]

At this point there not much left of that dodge

[@bleepinjeep]

No, but still a decent deal after selling the cab off it for what people are wanting for just a running 12v alone.

[@406ffroad4]

The feet on the jackstands are not even touching the ground why would that be used for that and there sold in pairs what yu get a backup 😂

[@claychamlee884]

Instead of Xj. ExJ

[@thomasleonard9685]

Just don’t love this. Weird for Weird sake is cool, but this is a lot of work for something unnecessary. Lot of people have slammed a Camaro on a blazer frame, stuff like that. But ask yourself why no one actually wheels them. I feel like you’re going to have to change so much, it’ll be a pain in Frankenstein ass Where are you going to put your overland gear? The real cool one is the pacer

[@bleepinjeep]

It’s gonna be a truck, why would you think a pacer has more room for overland gear than a truck??

[@greasemonkey4god]

Wait… you don’t have to build road worthy rigs this time? That’s kind of disappointing

[@bleepinjeep]

No, it’s kinda weird how they did it this year but it can be trailered everywhere, unlimited tire size, and has to be camped out of only 1 night.

[@edwardsimmons3721]

A ton of fabrication for this build.

[@davidwatt8457]

Yal's cameras are hot garbage compared to any other channel I watch

[@bleepinjeep]

Same cameras 📷 so idk

[@davidwatt8457]

@@bleepinjeep I checked the video settings and there's no difference between this and others. I still watch/enjoy the videos, just has been pretty noticeable going back and forth.

[@Nickwillfixit]

Dumb and dumber yep, Seems like I am watching Scrapheap challenge

[@zachburrows9842]

Please stop.