Super Nice idea! I have 2 rolling work benches and use them for out feed tables, but they weren't design to use them that way, NOW I've got an idea to raise them up level to the table saw. I had thought of just adding to the legs, but I like the how high they are for normal work/assembly tables. Now I can keep and use the locking casters for normal use too. This helps! thanks!
@Erik_The_Viking2 жыл бұрын
Much better alternative than other solutions I've seen. Well done!
@jon_craftingo.o4686 Жыл бұрын
Thanks for the inspiration. I like this design as it raises the height of the bench when stationary, and lowers it when onto casters when needed to be moved. Most other designs do the opposite. This will work with my plan to create a nesting pair of work benches that when deployed are the same height, but when put away, one slides under the other. Essentially, I will create a mobile workbench for my table saw, that when not in use can be lowered onto casters and slide under the out-feed table/assembly workbench.
@rosariomusumeci9724 Жыл бұрын
Very good design. The only problem for me would be that I have to lift the table first with my hand in order to activate the system with casters. Thank you anyway for sharing it.
@WPGinfo2 жыл бұрын
This is better than the alternative I've seen elsewhere.
@rafaelmijares9197 Жыл бұрын
@J-woodworking I just finished implementing your solution for my small 6" jointer stand. My shop is very small and the place where the jointer is stored has severe height limitations. So placing the casters on the moving parts was not feasible. This solution turned out exactly what I needed. Thanks for a super useful video!
@JohnColgan.2 жыл бұрын
great idea. good see you back, missed you. hope all is well with you & family
@mikewelch39038 ай бұрын
I have added wheels to tables, but this method of adding the solid leg extensions is a MUCH better method.
@tomowens27202 жыл бұрын
Great idea! I was wondering where you've been, very glad to see another video. I hope you and your family are all well my friend!
@RouenEchecs2 жыл бұрын
Très ingénieux. Bravo! Je vais adopter votre idée pour mon établi à roulettes pivotantes. Merci
@rolandgdean2 жыл бұрын
SOOOO good to see you again buddy and glad to know you're still at it. I had to go visit my sick father 1000 miles away and JUST got back so I missed this video launch but I'm getting caught up now and yours is the first I watched. I LOVE this table...I really need something that can serve as out-feed when I need it. The new counter sink bit is nice and I really like the new tools as well. I'm seeing a few new video techniques as well that are pretty sharp. Take care friend and be safe.
@erictheviking672 Жыл бұрын
Good idea but would be hard to lift if anything on the shelves/ top. Maybe a lever handle! Thanks for sharing.
@박용규-y6m2 жыл бұрын
오랫만에 영상올렸네요 날씨가 더운데 만드느라고 고생했어요
@jesusmanuelbrionesmedina75785 ай бұрын
No es chapuza!! simplemente es una buena salida y barata para solucionar un problema en tu taller de trabajo👏👏
@paulstanding72672 жыл бұрын
Much better system looks a lot sturdy than when it was rocked to much when it was just the wheels on the floor 😀👍
@AncoraImparoPiper Жыл бұрын
I like this system very much . I'll copy it :) Thank you for sharing.
@kabaottoemulsion18698 ай бұрын
this is stronger solution than other lever action!
@markwillride8 ай бұрын
I just did the exact opposite on a table saw. I mounted wheels on the added section.
@juliocalvo19402 жыл бұрын
OMG is vvveeeeerrrryyyyyy nice job 👏👏👏👏👏👏 Super wordy
@woodcreationwithMudita2 жыл бұрын
Simple, work maximum and low cost Brilian idea 👍
@espressomatic Жыл бұрын
That's a pretty light workbench. This is going to be a bit harder when the bench weights 3-500lbs.
@nobuckle402 жыл бұрын
Very simple solution. 👍🏻
@jamesbarisitz4794 Жыл бұрын
Clever and easy to use upgrade! 👍 😃
@unclegluk12782 жыл бұрын
Идея хорошая. Но почему нельзя сделать на постоянной основе? Зачем все время увеличивать и уменьшать высоту верстака?
@Panchosoto2 жыл бұрын
나는 멋지다. 나는 멋지다. 칠레에서 인사말 🇨🇱🇨🇱🇨🇱👍👍
@Miloumannen Жыл бұрын
Clever solution👍
@Grassy202 жыл бұрын
Good to see you!!!
@asteriovieira35872 жыл бұрын
Boa ideia. Eu faria ao contrário. Instalar os rodízios na parte móvel, assim, daria mais estabilidade à bancada.mas
@viktorkrapp55742 жыл бұрын
Супер идея спасибо
@anisawrus6 ай бұрын
What is the function of the hole in the block?
@user-ssrshin2 жыл бұрын
ㅎㅎ 이중기리 바꾸셨네요
@JoseSilveira-newhandleforYT2 жыл бұрын
Simple and effective!
@regisfourcade71452 жыл бұрын
simple, pratique, excellent !!
@ziiluduz2 жыл бұрын
Good solution!
@MadMulberry6 күн бұрын
A pity about the use of plasterboard screws. 😮
@rivernet62 Жыл бұрын
Brilliant but, drywall screws? Ick.
@CogentConsult2 жыл бұрын
Yeah, nice idea. However, those casters are too small for the weight of that bench. You’d be better off with 3” or 4” non-marring casters. They will roll so much more smoothly. Also, on the retractable leg lifters, go ahead and sculpt out about 2” high by 3/4 of the length of that supporting bar attached to the two temporary leg lifts. This will allow your foot to slide under that supporting bar to pull it out easier without having to lift the bench so high. Otherwise, nice idea!
@rivernet62 Жыл бұрын
Those casters are rated well over 100 lb each, and that bench is nowhere near 400 lb. Plus, they aren't subject to dynamic loading... Just rolling into posi.
@WoodworkingStudio2 жыл бұрын
sure
@hudsonsyhly2693 Жыл бұрын
Load capacity how much is it 200kg
@MrGeroth2 жыл бұрын
Neat idea
@horangnabee33342 жыл бұрын
굿 멋있어요~~
@69kaveman2 жыл бұрын
Nice!
@Пользователь-канала-м9м2 жыл бұрын
Спасибо!
@Don-dc6hy Жыл бұрын
USE the right size SCREWS
@YAHYAKHODHIRY2 жыл бұрын
مبدع 👍
@eikestrumpelmeyer2 жыл бұрын
Did you put that on both sides? Or just on one side?
@regisfourcade71452 жыл бұрын
both
@eikestrumpelmeyer2 жыл бұрын
@@regisfourcade7145 thx 4 Ur answer
@tomekvilmovskiy65472 жыл бұрын
IRL it'll stand on one place 99.9% of time (if not 100%) )
@koccocarrasco56962 жыл бұрын
👍🏻👍🏻👍🏻
@VadimBiliy2 жыл бұрын
👍👍👍👍
@АлександрЧумак-м2о2 жыл бұрын
👍👍👍👍👍👍👍
@ivanivanoff47762 жыл бұрын
Очередная херня. Чувак - откидывающимися надо делать колеса, но с нормальной фиксацией. Задумайся - чем ты больше пользуешься (работой на верстаке или катанием его туда-сюда) и что важнее. (machine translate) That's just more bullshit. Dude - you have to make the wheels hinged, but with a normal locking system. Think about what you use more (working on the workbench or rolling it back and forth) and which is more important.