The Most OEM+ Backup Camera Install! Dynavin x Natika Install!

[@jenniferthorp261]

still consider this channel one of the best on KZbin. I learn something new with each video.

[@LightningOW]

seriously, the content and delivery is perfect. like million subs quality content

[@48reb]

Awesome Jacob. Thanks for a nice first person tutorial on this. You made this so much easier for someone who is thinking about getting one of these for their Mustang.

[@getitlikemike3106]

12:49 Jacob got that Marine corps sticker? Hell yeah! Rah

[@Smile4theKillCam456]

rahhhhh wouldn't be a true marine without a stang

[@AlexRamirez-gc9xp]

I have two of those cameras on my truck, one for the front and one as a back up camera and they install and look great ! Good job on the install!

[@evanm4332]

Can u film a video on how to change the startup screen for the radio. Not sure how to do it

[@DavidBugea]

Doing this exact install on my 2012 garage queen this weekend (well, the new Dynavin unit), and I just stumbled upon this video, which is really helpful. I was really trying to avoid taking off my bumper, too, so the tip to take off the taillamp and use the alignment hole saved me some time and grief. And you also put my mind at ease as to whether the camera would be in the right position…I was afraid it would be too low, and I’d just see pavement.

[@scottthompson5855]

Purchased the Dynavin and the camera with your excellent suggestions. Thank you Jacob. Installing in my 12 Boss.

[@scottthompson5855]

Install in my '12 Boss was super easy with the video. My wires (on Dynavin) were marked Camera (Brown Plug) and red wire was NOT marked power, but spliced into this with red wire and plugged yellow cable into brown. Cut the green (line wire) and that was it. Works perfectly. Had to drill bumper as 12 doesn't have the b/u light full trim piece, but camera looks OEM between the two '12 recessed b/u lights. Easy to install nut to secure camera by removed driver brake light. For

[@jessevanderleest6787]

I just ordered my Dynavin head unit for my new Boss 302. Coming from a premium Mustang GT to a Boss of the same year is a trip. Definitely going to order the same camera. Thanks Doty!!

[@bdans123]

On my car I had to reach all the way in through the bumper in order to tighten the nut that holds the camera in. If you have gumby arms you can reach the nut then you can hold it down with your fingers while repeatedly tightening the camera into the nut with your right hand. There's not even enough space to get a tool on it. It's in super tight, but if my arms were like a half inch shorter or wider I would have had to glue it. Most people would probably remove the bumper.

[@DMarra214]

Dude, your videos have been super helpful. I was debating on the Dynavin head unit for my 2012, and your install video convinced me. I'm about to order the backup camera because like you, I wanted something that would look like it belongs. Thanks for the video showing how you did it, now I know exactly what I need to do.

[@DMarra214]

Unfortunately for me, my 2012 doesn’t have the convenient cover plate that yours does. I suppose I can manage drilling *one* hole in the bumper.

[@DMarra214]

Update: The hole was easy to drill, the camera mounted perfectly and worked forst time! The red/black wires on the camera end were not needed at all, I just taped them off and tucked them out of the way.

[@ohPuff]

Okay yup imma definitely going to attempt this at home 😁

[@sukhrajmann8720]

Dang straight saviour! Can’t wait to install on my mustang!!!

[@zach_waltonn]

I installed a pioneer head unit and that very camera on my 03 mustang and 100% that camera is better then most oem camera pretty high quality good colors and good angle

[@oldkootz]

That’s awesome! I ordered my Dynavin yesterday and than I ordered that same camera today. The camera is to arrive tomorrow (Saturday) the Head unit is scheduled for Thursday. I had already scoped out the same location as you... (which wedge did you use?) I will probably install the camera before Thursday. Thanks for your help Jacob!

[@JacobRDoty]

Perfect man! Used the largest wedge!

[@oldkootz]

Jacob R. Doty question about the additional red and black wire they have on the extension... did you just tape it up or cut it short then tape it up? I am guessing the Dynavin gives the 12v Power thus you not mentioning the power from the reverse lights. Remember I get my Dynavin Thursday. Can’t wait and want to have the camera ready. Thanks again bud!

[@breal6842]

@@oldkootzI have the same question. I just got my camera and ran everything, the Dynavin comes Monday. I went ahead and wired up the red to reverse and black to ground since I already had wired into the reverse on a wireless camera (I hated it). I guess the red wire at the head unit is a constant 12 volt source and the red/black is for on only when in reverse?

[@josealanis2912]

@@breal6842 how were you able to get the nut on I’m having trouble reaching it

[@mhershfield]

@@josealanis2912 Did you figure out how to get the nut on? Attempted this before with no luck

[@neilbarber]

Great video man, really handy, I should be tackling this soon and good to see some tips on routing it and how to do it without removing the bumper.

[@robbieowens1012]

You did a great job at showing the steps! Im planning on ordering the head unit along with the camera for my 2013 mustang very soon. I will be using your videos to help me along the way.. lol!

[@xgntwrxgaming674]

Just did this install on my 2012 GT, thanks for this video bro it helped a ton!

[@rickymcdowell199]

It took a couple videos including yours, but I believe I have a good idea on how to do this for my Mitsubishi spyder. Now I just gotta find a the right cord to run, as my stuff didn't come with one. :L

[@brandonv4900]

Quick question. I didn’t catch the wiring in the rear. Positive to reverse lights and ground. Did this camera not come with that. Super easy if it is wired completely with the head unit. Thanks

[@andrewhanson241]

Jacob, This is a great tutorial. How is the camera still working? You may have a video reagrading the Dynivan head unit. Will it work for manual to turn the camera on?

[@juanespinoza435]

I did pass thru my camera wire underneat the the back seat under ned the carpet into the ce ter console and straight to the headunit, I am runing a Dynavin D8 pro headunit and the same Natika camera just grabbed from ebay for 23 bucks

[@DarkStar181992]

Love your videos. I ordered a Dynavin N7 Pro for my 2011 Mustang after watching your other video. One question regarding this video, you didn't show the power wire connection for the backup camera. Did you connect it off screen?

[@quakana]

Trying this on my daughters 2013 right now. How did you get the nut over the camera bolt and tighten it? Super hard to get to that area

[@JacobRDoty]

I just reached through after removing a tail light

[@quakana]

@@JacobRDoty Thanks for the vid and the reply. Hopefully finishing up tomorrow

[@14frankling]

Are you thinking of ever upgrading your front seats to like recaros or something along those lines?

[@miguelvaldez4891]

Hey man I love you’re videos!! I’m looking to buy a ‘14 stang and watching yours videos really motivate me to get one myself! I love how much time and effort you put into your car and videos! Keep them coming! 🤟🏼

[@tylerortiz5173]

I just bought this, it’s gonna be hell since I have a hatch lol. Thanks for the video 👍🏽

[@tylerortiz5173]

I got it hooked up, it was easier than I thought

[@tylerortiz5173]

@Brandon Young i believe I had to connect to ground and then I wired the camera power wire to one of the reverse lights.

[@tokyodreamer7797]

So i did manage to install dynavin myself. Couldnt find the wire for steering wheel controls and didnt get the back up cam installed yet. My dynavin doesnt have a red 12v reverse trigger wire. My 'reverse' wire seems to be green but has no other info on it. Also, my backup camera did not come with those blue connectors.

[@supitk]

How has the camera held up since the install? Just purchased mine, great price on amazon.

[@davidsantos6786]

I’m not sure how to tap in the red wires. Any other videos on how that was done?

[@Dean403]

I'm doing this now, any suggestions for me?

[@r1nstang100]

Just picked up a dynavin n7 pro and not sure if they changed things from what i have and you have but no bullet connector on it. But how did you get around a trigger wire? I'm seeing Manny people have to tap into a reverse light wire. Or is it just something that the Nikita camera doesn't need? I connector the yellow/brown RCA connectors and tapped into the red power wire just like you did but still no video. I do have a cheaper camera but looks to be the same one dynavin sells. I've decided to order the nikita camera just for the mounting stalk versus the flimsy mount this cheap camera has

[@braxtonbragg1146]

So did you only use the trigger wire and the signal wire to power the camera? I’m looking at it on Amazon and it says to use the other two wires (black and red) to power the camera. Did you only use the red wire bundled with the video signal?

[@Dean403]

Doing this now and also confused. Do I only need one or both?

[@eyeoftiger101]

Absolutely love your attention to detail!

[@VictorGarcia-sj4fb]

So u didn't have to tap it into the reverse light or anything like the other reverse cameras?

[@johnpoggiolo3659]

The camera wire has a red and black wire , what did you do with the black wire? Yellow to brown, red to red, black to ???

[@emiliolopez4851]

did you ever figured it out?

[@ishwav]

How did you get the camera to stay though? I’m doing this install and the nut it comes with is thick. Did you just screw the camera into the plastic piece?

[@Frommalaysiabutaonefan]

I’m so Camera Man and Shy I love This Man

[@keithadams3286]

Which wire did you tap into for the reverse red wire to trigger camera in reverse at the rear

[@alexbighams]

Yea I missed that part also

[@r1nstang100]

Did you ever figure out that part. I'm installing a camera now and ran into the same issue. I was starting to think the guy did some voodoo to get it to work without a trigger wire

[@joshlazko2953]

I bought this natika backup camera but I’m looking for a monitor dash camera that this would work? Any one can drop a link?

[@kevinmace1654]

nice job Jacob! clean install

[@randischwarz5072]

Does it really function well? Do the steering wheel controls still function? I own a 2013 V6 Premium w/pony package, Shaker 1000, with satellite radio. I looked at the Tesla screens, but many of their functions do not work in the car,

[@cristianramos7343]

How did you put the tighten screw? Is that inside de bumper?

[@Wolfe_Auto]

would love to see some more videos of you cruising

[@Tnmyes]

Where did you buy all your exterior carbon fiber pieces? Such as the licence plate holder, i can see you also have some pieces by the end of the difuser on each side, i believe you also have a front carbon splitter

[@HeyBigChriss]

Been looking for this man. I have a 2014 5.0 with the standard OEM Nav system, BUT it does not have a back up camera! It is the most annoying thing about my car!

[@josephr.8622]

Do it man 40$ for a backup camera sounds like a steal

[@remleperez5591]

I have the same OEM Nav. Would this work with it? A shop quoted me $3,000 to add a camera and new head unit.

[@riffraff9000]

I just picked up that same camera for my 2014 GT. How did you get a wrench on that nut on the camera's post? Looks awfully cramped in there.

[@JacobRDoty]

I think I finger tightened lol

[@MUSCLECREWDave]

Weird my Dynavin radio harness doesn’t have any of those wires behind it. Alittle confused, I noticed you didn’t even mention the power and ground wires in the harness included. Wondering if those are needed to trigger the camera, I’ve already applied 12v n ground to those with no success.

[@MUSCLECREWDave]

Never mind, needed another harness for the radio.

[@tolucacr9]

@@MUSCLECREWDave Did you use the power and ground wire. I’m having trouble wiring it. I only wire the trigger wire and the yellow connector like in the video and it’s not working.

[@kurtnickel5137]

How did you attach the nut onto the camera. There is no room to get a hand behind the license plate cover

[@johnstlaurent6611]

I have been contemplating put Apple car play and a camera in 2012 GT500, I was worried about the OEM LOOK, this camera solved that, I’m ordering it now, as for the Apple Car play not sure which way I want to go yet. I was thinking about buying a new head unit from a wreck, what are you thoughts

[@canson1988]

please any update on this? i got 2012 gt500 also with nav and i am not sure if you can add backup camera to it?

[@untraumatized]

Did you have to add the “Universal Mount Backup Camera” option for this? I want to copy your exact set up!

[@austinpodobnik4816]

i wonder if this is able to replace the backup camera thats integrated into the wing. id love to get the camera just above the plate so i can run the CS or shelby spoiler

[@joshlazko2953]

I’m looking for dash cam that is compatible with natika backup camera

[@Choforo350z]

Congrats dude, regards from Sonora Mexico

[@DanielRodriguez-xb5kd]

Does this backup camera work with the sync screen?

[@majorpayne164]

I installed this exact same set up last year. Your video was extremely helpful in doing so. However lately I’ve experienced my backup camera not working intermittently. At a cold start I’ll back out of my garage and it works. Drive it someplace and the camera stops working. Get it home, park it, try it again hours later and it works. No idea what is going on. It could be heat related, don’t know. Have you experienced anything like this with yours?

[@JacobRDoty]

Yep. It was how I ran my wiring. If you watch my newest dynavin video I show it. When I ran my cable inside the kick panel it pinched the sheathing and shorted it. Easy fix though

[@majorpayne164]

@@JacobRDoty I called Dynavin today. They recommend I check all my connections. I started with the ground attached to a tail light bolt. It was barely hanging on. So re-ground it. I’ll see if that works. I’ll also checkout your new video. The Pro 8 looks sick, but I don’t want to spend the money all over again.

[@itsjustjonnoh]

I noticed you have a subwoofer, no static in the video since you are running your wire on the same side as your power line?

[@Houts5.0]

might be a dumb question, but do the lines turn when your turning your wheel or no?

[@untraumatized]

I’m assuming no but I am wondering the same thing hahaha

[@JacobRDoty]

Nope - they are set by you when you install the camera

[@untraumatized]

@@JacobRDoty Thanks!!!

[@noahhuraan5353]

Damn, bought the universal one from Dyanvin thinking it’d be similar or possibly easier to hook up, I was definitely wrong.

[@Boris-xx7dw]

Just bought this for my 2014 , id like too know how to change the start up screen to the mustang pony .

[@colesnyder7640]

Would it be possible to have a front and rear parking camera ?

[@Blizzard_5.0]

How many times did u replace the back up camera

[@dopeboyp3487]

Nice job. I think I’m going with 2 of these rather the Dynavin models. 👊🏽💯

[@NSab392]

How would this work on a stock ford head unit with the screen? Same thing?

[@robbieowens1012]

I doubt you’ll answer back but how to you get the nut threaded on the backup camera. I was able to feed the wire and use the 3M to stick it but I’d like to try and get that but threaded in there if possible. Awesome content and super helpful!

[@studiesfromthebible]

I totally want to know how he did this. I am at eh same place

[@robbieowens1012]

@@studiesfromthebible I wound up having to pull my rear bumper off. It’s really not that bad just look up a video on KZbin on all the pins and screws. Took me like 15 minutes

[@js4unc11]

With it being almost 2 years now, how do you like the Dynavin + Natika setup? Any issues? I was thinking of pre-ordering the Dynavin pro 8 and the Natika camera

[@user-ee7pz7gp6s]

Did you have to connect the camera wires to the taillight?

[@Luisgarcia-uz5uk]

Hi Doty,love your content not to mention the car..I have a 2014 White GT and I bought that camera before my Dynavin unit came in… looks sharp, my question is what size wheels and tires do you have on your car ? I love the stance..and if you don’t mind what brand wheel also..keep up the good word man👍🏼 Thank you Luis G

[@daveryan8216]

When you take it out of reverse and screen goes back to the radio but then after a few seconds it goes black but just touch the screen to get back to the radio but then blacks out again is it a setting on the radio

[@8196jlb]

Thanks for the update and details!

[@ethanyamulkyjanela4479]

Can you do this to a 2013 premium Navigation pack mustang that didn’t originally come with a backup camera??

[@JacobRDoty]

If you install the dynavin, yes

[@spadedace302]

🔥🔥🔥 been waiting for this vid

[@Tstringsstringer]

Hey guys! I have a 2013 mustang with the premium interior. My OEM screen doesn’t not switch when I go into reverse. Don’t have a reverse camera of course. Buying that camera, does anyone else know if there is something I need to do to program the original screen?

[@derekbultemeier2192]

I’m in the same situation with my 2011 GT Premium. Did you figure it out by any chance?

[@canson1988]

@@derekbultemeier2192 same situation here with 2012 gt500 , any update on this guys?

[@timmcnulty985]

Hi, so I just bought the same dynavin unit and camera. When you installed the camera did you only hook up the trigger wire? What did you do with the power and ground? I ran that back to the head unit and the camera is on all the time.. if I just hook up the trigger wire only it won't work.

[@nathanerickson5166]

You ever figure it out? I was wondering if you knew if this plugged into the stock wiring harness or not.

[@gil4395]

Mines still won’t turn on bro

[@piojomich85]

Is this the stock unit ??? I have a 2013 gt500 with nav, dvd etc etc With this work on it or do I have to buy a head unit ????? Very interested in buying

[@canson1988]

any update on this mate? i got 2012 gt500 with sync nav also and wondering about this too.

[@piojomich85]

@@canson1988 nothing yet

[@canson1988]

@@piojomich85 ok

[@kachare86]

Is there enough room between camera location on top of number plate and back light to put the screw on the camera to tighten it?

[@benleeli575]

Yes.

[@Samson-dn4eo]

does it matter what year your mustang is? mine is 2008

[@Pittsburgh-412]

I wanna get a camera like this but I want something that records and uses the head unit. Anyone know of something that will do this?

[@tristangaetan44]

What song is that at 12:50?

[@1982DrH]

What license plate surround(carbon fiber) is that?

[@JacobRDoty]

Trufiber!

[@danr390]

Does this Backup camera work with the sync screen?

[@timothytutt9542]

Am I going to need the black wire I have the Tesla head unit

[@ilc-nl3yy]

Can someone tell me if this camera will connect to my stock sync premium radio in my 2014 Mustang? Thanks. How do you like that Dynavin? Which model is it?

[@greenyi2]

if the sync premium radio supports RCA video input, then should be no porblem.

[@Bejejwa]

Does anyone know if the cameras proximity lines curve as you turn the steering wheel?

[@chris6074]

To this day he still hasn’t showed us how to change the start up screen 😤

[@JacobRDoty]

Easy! Get a micro SD card, upload photo to the card, plug the card into the front of the h/u, browse the files on the head unit on the card, then hold or press the buttons to see “set as start up screen” or something like that. That’s all I did except I put a photo of my logo lol

[@chris6074]

@@JacobRDoty thanks I’m about to do this in my mustang rn 😁

[@Soldier1287]

Wired to my tail lights where I can turn on whenever I please. Now will not turn on after one short drive

[@eduardofigueroa2866]

Bro so I have a big question, where did you connect your amp to? For your subwoofers At the back of the stereo.. which wires do I connect ?

[@subiyota]

Got to run RCA’s

[@averux]

Thanks for the video! It was very helpful!

[@colinmullins9155]

Liked before I even watched. Love the content brotha.

[@juliomejia11]

My dynavin n7 over heat and turn off anyone knows how to fix it?

[@sam92ization]

How in the world did you tighten the nut on the back of the camera without taking the bumper off?! You didn't show it in your video

[@winkawak]

how was the camera tighten down?

[@moustafaelbatawy1099]

Does anybody know where did he get the access to the nut to be able to keep the camera in place??

[@benleeli575]

Pull out the licence plate lights and the left taillight, then you can reach the nut with a wrench. Use a Finger to place it on top of the nut.

[@josealanis2912]

Where you able to get it? I’m having trouble with it too

[@nated4949]

Did you have to connect a ground wire?

[@jasonneal]

I got the same camera and a Alpine w650 head unit and nothing. I think I might have gotten a defective camera bc my old camera works. I got this new one bc the one from Alpine is a crappy picture quality

[@jalcanites2939]

How far is the red line from the bumper?

[@josephr.8622]

Backup cameras are great especially when you have really dark tints & you need to see at night

[@JacobRDoty]

Just used it late night with no other light but my tails and it was PERFECT! Nail parking every tjme

[@Hardwaretuned]

@@JacobRDoty that original hole you drilled did you have to move the hole location to fit the license plate ?

[@blakephillips2929]

Will this work on a 2011 mustang?

[@purifiedbleach1196]

How big was the wedge?

[@keithadams3286]

How's the night vision

[@AlbertFlores11]

The backup camera link doesnt work