BEST Modular Toolbox System FOR YOU!? Top 15 Options of 2023

[@uTubed007]

I believe your review is the only one that presents the bucket organizers which I didn't know existed, Thank you for being thorough. I much appreciate your reviews.

[@miniaddict4534]

Not gonna lie, that may be my set up until these systems go back on sale.

[@doughendricks9912]

@@miniaddict4534. I’ve used a Husky bucket bag for years, for my hand tools , plus a couple cordless tools. About $15 for the bag, and you can usually scrounge up a free bucket from somewhere. Duct tape a piece of garden hose around the bucket handle and you’re good to go.

[@iwriteonshit]

@@miniaddict4534Like @doughendricks9912 when I started taking my tools to work 15 years ago, it was in a 5 gallon bucket with a Husky insert and a Ryobi drill/driver in the green bag it came with. I eventually went with the Ridgid boxes and red tools but my bucket still sits in a milk crate on top. I've bought a few more over the years because they make great project buckets. My wife uses one for her gardening stuff. I highly suggest grabbing one because it will be forever useful and I gotta say, I'd put it in the list of the top 10 most useful

[@georgedavall9449]

Wow, really

[@paulmurray3837]

Your catagories are confusing to me. I would like to see comparison of similar priced options rather than 5 rounds of testing.

[@caseyhoward9101]

I have no idea what was going on.

[@leblancexplores]

Yes this video is wack.

[@joeinsocal]

I was so poor , I started with a 2 gallon bucket and a hand me down tool belt. Now I live the Milwaukee life, and a Pelican case or two when I travel.

[@JakeWeihe]

Very nice 👌🏻

[@macemace5196]

Lol. Me too. It sure is nice now being able to walk in and by whatever I want. 😊

[@mikefeil3568]

With 40+ yrs as a construction carpenter, I've used everything from handbuilt wood carpenter box, long metal carpenter tool box, 5gal bucket systems, etc. You name it, I probably had it. The first "system" I used was the Ridgid 1st gen boxes. Served me well and did a great job for a reasonable price. Then we jumped on Packout when it first showed. Excellent, well built, worked well in new construction, crappy unpaved dirt jobsites. Lots of choices, versatile, constant flow of new products. Did the job in spades but started out pricey & went up from there !! Probably overkill for homeowner/DIYer tool storage. 2nd gen Ridgid improved on already good system, sturdy, well built boxes, readily available, best bang for the buck, would be my recommendation. Had years of experience with Festool in shop setting. Good for that but don't think it would hold up in a rough & tumble New construction environment. Just dont think boxes are sturdy enuf for that use. There ain't no perfect system for every situation. First, you have to sit down & honestly access your needs. Is it mainly new construction jobsites or remodel, finished homes. I recently seem to do both & Packout does the job well (pretty sure Ridgid would do the same for less $$)

[@JakeWeihe]

Thanks for the extra insight! 👍

[@semo5515]

i actually have the hart for over 7 months and so far they are good, no major issues and using it on a daily basis from ajob site to a job site but not water proof which is ok for me because usually I use them during dry envirmount

[@JakeWeihe]

Nice! Please update us again in the comments if anything else happens 👍

[@chrishoffman4635]

I have the Husky, Ridgid, DeWalt Pro, and Ryobi toolboxes. My favorite is - each of them! My Husky is my grip box for working on indie filming or videography. It's small enough to fit with my video gear in my Explorer, but just big enough to hold what I need. DeWalt holds majority of my woodworking tools and a few other power tools that i don't reach for often. It's solid enough that i treat it was my default storage toolbox. It is a bit wobbly when on the move and is quite hefty. My Ryobi is my DIY, around the house toolbox. It's lightweight, and honestly one of the quickest to get into. It does feel "cheap," but it's a different approach than my DeWalt or Ridgid. Cheap is my Husky - you can tell it's plastic that isn't as tough as the DeWalt or Ridgid. The Ryobi is oddly flexible - i think they went for a material design that is significantly lightweight but holds up well because it flexes instead of shattering. It's a bit weird to close the latches though as you showed. You don't want it flexing that much when trying to close it. 😒 My Ridgid holds mostly hand tools and some automotive tools. It also has my measuring tools. This system is by far the fastest to gain access into (if you don't have weird hand truck add-ons). The latches are solid and i trust them more than the DeWalt to lift multiple boxes at once. Why do I have 4 different systems? Well, I don't want to have to guess which medium toolbox my drill is in. Plus as i said each has pros over the other. I would hate to have to drag my DeWalt upstairs, but my Ryobi is an easy lift. It's a pain to disassemble my DeWalt to get into a specific box, but it has the best size and toughness to keep things stowed away. Honestly, if i had to pick a top two it would be my Ridgid and Ryobi. If you're going to job sites or into people's homes, the Ridgid is a good all-around option. If you need a toolbox to keep a pile of tools handy while fixing up the house, the Ryobi is easiest to move around while keeping general tools safe and organized. If you're going to a tough job site or war-torn country, the Packout is probably the toughest premium system, but i do neither of those things. Overall, I mostly agree with your review. Each system has a specific user as the target. And yeah, the Masterforce is a complete derp going for the same target as the Bauer but getting beat at price and features.

[@light0000]

Husky for me

[@tomcopeland6424]

Great points. I like the idea of having different brands for different applications.

[@nitrobenz1694]

Thanks for that mini comparison

[@jamesmocharski4803]

I love me some Packout, and have quite a few pieces in the system. In my older style Ford van, however, they seem to take up just a bit too much real estate. It doesn’t help that the existing metal shelves that were already in place when I purchased the van do not fit the Packout boxes well at all. At some point, I definitely plan to either flip the shelves and add cleats to the flat surface to hold the Packout boxes in place, or build some wooden shelves that can hold the boxes. The benefit of this approach allows for a more customized solution as well as the addition or incorporation of shelf glides, that will allow me to access items from the boxes by just simply pulling the shelf forward, lifting the lid, and then setting it back when I’m done, rather than having to unlatch a box and completely remove it from it’s shelf or stack to access it’s contents. Until then, the Craftsman VersaStack have really fit the bill. Their smaller footprint, yet variety of options allows for a reasonably decent solution for my needs and constraints. True, their not built as ruggedly as Packout, Flex, or Mod Box, but I tend to try to take some care with what I’m loading and how I’m transporting anyway. I can’t see spending this much money on high quality tools, and then proceeding to beat the snot out of them and expect them to last. Sure? they might hold up, but chances are that, even if you do have a warranty claim within the designated window, if it’s a borderline call, and your tool looks like it’s been dropped down the stairs and dragged through the mud every single day for the better part of 5 years, they may just tell you…sorry, it’s user wear and tear and not a defect. Plus, the Craftsman boxes fit the Red/ Black color scheme of my mostly Milwaukee tools. Should that REALLY matter? No. Does it kind of matter? Sadly…..yes, yes it does.

[@donphillips5957]

My wife bought me the T-stack system for my birthday, I was already using a couple of Craftsman bins it my truck, so I was pleasantly surprised to find out they work together. I only wish either set offered an adapter plate or other mounting for the smaller bit cases.

[@tylerdurden7869]

Dude those Bauer inserts for the bottom box are GENIUS WHAT THE HELL EVERYONE else ???

[@amandaclairerhodes]

Much agreed!!!!

[@whirledpeaz5758]

Greatly appreciate this concise listing of systems. The cross compatibility of the DeWalt and Craftsman TStak systems with their premium offerings I find compelling.

[@CurlyWoof]

Thank you very much for your thoughtful comparison of all these different brands. First time I’m seeing such a comprehensive overview. You even include the Harbor Freight. Good work.

[@Jackson-T23]

IMO the Packout is the benchmark amongst all the brands. With that said, I personally went with the Ridgid setup. It's about half as expensive and more space friendly. The packout boxes would take up way too much floor space in my garage.

[@JakeWeihe]

I agree. Love my ridgid boxes and Packout

[@doug667]

Another advantage the Ridgid has, it’s the only box with full 20” wide clearance inside, which allows you to hold a large paint roller tray (about 13”x20”). I appreciate storing those trays and liners together with other paint supplies, without using a giant tote container. Also great for camping, due to removable wheels, affordable price and less wasted space compared to Dewalt and packout, for example.

[@JakeWeihe]

Very true. My favorite part is the included wall cleats.

[@chrishoffman4635]

I do like how the Ridgid totes can attach more items above. The Ryobi tote has to be on top, as there isn't a latching point for it. When raining, I can swap a closed box above the Ridgid totes to cut down on how much rainwater hits the items inside. Or, keep things from falling out during transport.

[@ChattanoogaDan]

I picked up the Hart system with one additional low profile box just to make projects around the house easier and make it easier to take my tools to someone's house if I'm helping them with a project. It's been perfect

[@Taylorstoolbox317]

The Kobalt is a solid choice if you want to buy one and be done. It’s solid and durable and a great price, plus it effectively holds all my tools.

[@JakeWeihe]

Take a look at the new husky build out… video coming soon

[@gregorymandile2321]

I have 1 and i like it.also i have pack out ,Ridged,Dewalt and i.m going to get the Huskie

[@orzot]

If you must, the Duluth Trading Co bucket organizers are pretty decent. The pockets are big and they're really durable.

[@jeremyharris5778]

I've been on the packout for 5 years now in a plumbers truck in every weather situation possible, have had no issue's other than I didn't have a stack strapped up for 8 months and in the middle of winter the top on the bottom 2 drawer let loose and dumped that stack and broke 2 latches on on 2 diff boxes and thats it! Didn't even lose any fittings! Dont spend your money on anything but Milwaukee! Especially if your in a service truck and in and out all the time getting tools, packout is king!

[@erikabrownfield174]

As demonstrating blacksmiths, we have to have some sturdy boxes to carry our gear. The Milwaukee system was the sturdiest we could get our hands on in 2020 and it has done a fantastic job for the three seasons we have had it. The bottom rolling box has been key in moving our portable anvil on the lid like a dolly and the lid, handle, and wheels have held up great. We haven't been easy on it and it has taken everything we have thrown at it like a champ. We have recently added the 4 wheeled base and that has proven to be a worthwhile investment in just moving our ever growing "tower" around the shop.

[@JayGriffinRTZNJ]

I'm glad I bought several of the Harbor Freight canvas rigger's bags before they discontinued them because they've stood up the best for everything including dark-but-too-hot-for-plastic iron. They carry as heavy a load of iron as you can muster and are stackable on a standard hand truck. I try to go pretty minimal for blacksmith demos.

[@DanielGomez-cf6vk]

I use ridgid gen 1 and love their gen 2.0

[@JakeWeihe]

Nice

[@jontnoneya3404]

This was very helpful!! Thanks!! It shows the different platforms and systems and gives everyone a LOT to think about.

[@JakeWeihe]

Thanks! That was the goal! 👍

[@SaintsWarband]

Rigid is the best value at the moment

[@JakeWeihe]

I agree

[@Jopn83]

I got mine 3 piece for $80 in black Friday 😂

[@adamcain2028]

Maybe but the clasping design is rudimentary and cumbersome in comparison

[@Tman0517]

Ive had a whole set of Ridgid and Milwaukee in the back of my truck for over 2 years. Its so hard to choose but the price point to quality ratio of the Ridgid makes it just a little better then packout. Ive also never had a Ridgid box leak or get frozen together. Milwaukee's base box also dose a really good job of dumping standing water from the lid into the box if youre not paying attention. And now with the Ridgid 2.0 i plan on further expanding on tge ridgid system. However i will note the Milwaukee is built like a brick and i love the latch system the other 3 seasons out of the year.

[@JakeWeihe]

Awesome! Thanks for the input 👍

[@TNAN007]

I have Ridgid system and still waiting for them to release the drawer style box. That's the most useful box in my opinion. Might go Milwaukee if Ridgid doesn't have that option in the near future.

[@grahamcairns2249]

I have yet to see a comparison that even touches on the security of the boxea. Knowing that tools can be stolen on job sites, which has the best security?

[@JakeWeihe]

At the end of the day they’re all plastic boxes… if you want real security use a metal job box meant for that.

[@grahamcairns2249]

Well, that was not the most helpful reply. I guess not even approaching the answer is the way to go. Keeping my tools at home would also work, but still isn't much of an answer.

[@BigBadBalrog]

Outstanding structure to this video and honesty in recognizing pros and cons

[@JakeWeihe]

Thank you!

[@JeremyKapusta]

very helpful, thank you

[@JakeWeihe]

You’re welcome

[@hightecrebel]

For on my truck, I love the Hart system, I've got a bunch of the 2-drawers and a couple of the smaller toolboxes. They've held up great, and I have no reservations about them at all. If I had to take them in and out of buildings, I'd go with a Pack out dolly and a stack of the drawers, with a box and crate on top. Nothing with a lid on the bottom

[@JakeWeihe]

Nice!

[@nildefonsop]

Sustainers is what got me in the box game but I’m a Milwaukee man.

[@benjaminmasters5375]

I'm a sucker for the rigid packouts for home diy use, wish they made a 2.0 version of the 28 inch box too

[@benjaminmasters5375]

Hey Jake weihe you gonna make some 3d printed stuff for us rigid fans? After all it's the 2nd most popular packout brand 😁

[@mattcastleberry683]

The 28" Box is kind of a 1.5 version. It can handle the half size boxes like the 2.0. I have 2 of them. I just wish the wheels were larger & that I could lock the 28" onto another 28".

[@munecaeburro]

I have the Bosch L-Rack system with the dolly. It is good enough for light use. I have been using it for 4 years now without any problems.

[@jeffalan6339]

A video that hits the nail on the head, as a contractor need to take tools to the jobsite quickly and efficiently. I looked At DeWalts looked more DIY, even KZbin reviews felt was not professional grade. I found the Milwaukee far superior, it was given higher praise by contractors, it has couple of needs attention then would be prograde, even though most of the system is prograde. The rolling chest needs. the handle to be removable or retract lower, the release at times sticks then have to fight it to separate the components Nice to seen two other contractor grade systems... Makita Mac Pak Bosch L Boxx-2 other than that the video was very entertaining.

[@cafecybernz]

Awesome video! Very informative.

[@JakeWeihe]

Thank you

[@johnsikora6043]

Great video. I have the Craftsman. Now I know I can add pieces from Stanley and DeWalt. I didn’t know they were compatible.

[@JakeWeihe]

Right on

[@jobratgiggles6]

I got the Hart tool box set . I love it. I use it for my crafting as I do scrapbooking and take it to my scrapbook crops/ retreats. Works well for taking things in my tool box.

[@JakeWeihe]

That’s awesome!

[@doughendricks9912]

Husky bucket bag for my hand tools. I want to be able to see my tools and grab them easily. Love it. Ridgid pro gear 2.0 for my cordless stuff. Water tight. Best bang for the buck IMO.

[@snowayadventures]

I have the Ryobi link system on my walls which works awesome for outdoor stuff and tools. So far I’ve been impressed, can be a little clunky but I like them

[@darrencampbell8817]

Hey thanks for taking the time to compare all these bro, great job. As a lot of commenters are also saying, I've been using the Ridged V1 system and was about to look into the 2.0 until i saw the Klein Mod Box is about to release. Really looking forward to that video when it drops.

[@l-ssfhgr6118]

This is the comment I am posting everywhere possible: Bought this Flex pack out a few months ago. Used on three projects. The latches between the top box and the middle box kept hanging up or not locking. Soooo, tried to call company service to get a fix. Wasn't asking for anything but a tech to walk me through the fix(maybe a replacement latch?). First, good luck getting through, they DON"T answer their phones. After a half hour hold the message comes on offering a call back. No choice gotta grow old on the phone or give up. No call back, so the next day I try again, same deal, but this time I get a call back. Pleasant young lady hears the problem and takes all my info and says they are sending a new replacement unit!! Of course nothing took place, NO Replacement Unit, No Latches, NO NOTHING!!!! The product seems to be well made except for these few minor issues, however I would never recommend buying a Flex product. They have no customer loyalty. I no longer care to upgrade my tool platform to your products, as I was considering your power tool line. Not anymore.

[@nitrobenz1694]

Customer service is definitely something I overlook because it’s so hard to quantify(and verify!) so thanks for adding your experience.

[@georgedavall9449]

Phuck a FLUX! Im wid ya bruh, sorry You had a hassle.

[@btrswt35]

We have a pack out system at work and honestly, Milwaukee did a great job. I'm about 230+lbs with tools myself and can use it as a stepping stool with absolutely no fear of it breaking. The release for the individual boxes is awesome.... Right in the front, one handed, and very intuitive. Overall, incredibly well thought out and designed. I'd like to get the Ridgid for my own personal use at home. What I would like are some drawers. I'm not sure if Ridgid has any but will have to look into it

[@jamesbynum3123]

DeWalt Tough System 2.0 has two drawer units at Home Depot. I found them yesterday lol

[@3jmontg]

Ridgid drawers are now coming!

[@btrswt35]

@@3jmontg sounds awesome 👍

[@kevinnoble7532]

Been seeing your shorts on all of the mods / attachments you've been making - love that! Would love an updated version of this with the Toughbuilt and Flex packs added to the list

[@antelop3629]

Thanks for this intro review - I am on target now. Cheers.

[@cjebel6584]

I have husky tool boxes for van organizers on the shelves since they’re cheap, the drawers and crawl tray are a game changer though. I’ve got the little organizer cup tstack boxes bolted to the shelves at the back. I really love my tough stack drawers but they don’t come with dividers so it’s been difficult justifying a second box. And I bought my first ridgid pack out set as a helper and I honestly wish I would’ve sprung for Milwaukees pack out in the beginning since I regularly have to tie my vacuum off to the top of my stack and the latches are wearing out but besides that I have absolutely no damage to them, they work great the bottom 2.0 box can be used as an XL tool box and I still have my original box if i decide to roll like that.

[@light0000]

Husky❤🍻👍

[@allenjohnson4938]

I got Both Flex StackPacks ($111 per 3pc Stack) and Hart Stacks when they were Clearanced. Flex for Jobsites and Hart for Interior Jobs a Lightweight alt.

[@JakeWeihe]

Can’t argue with a good deal

[@trowawayacc]

Hello. I was wanted to ask for a video testing the water tightness of the diferent boxes and also how the water drains from the lid. Thanks.

[@JakeWeihe]

Check out my Best of 2023 video where I show that for the 4 systems compared

[@michaelfairchild]

Im a Makita guy and use Makpac with foam cutouts for tools, but Festool got me on their Sortainer system for everything else.

[@crabbee88]

hart has been great for the price I had loads of tools if i know im not beating the crap out of my stuff i just use cheap sterlight drawers and then hart as my rolling system. i always have a tool backpack with my most used handtool and I carry a roxxon phantom because I cut a alot of pallets open

[@michaelgrandinetti3170]

Price points are critical in these systems......so having manufactures change or upgrade latches for example will increase price, reducing cost value for that shopper. Great job on comparisons as we needed something like this as others have not done as good of a job as you have, so thank you. I have Rigid's system and now with the added drawer units......I could not be more satisfied. Thanks again for your segment.

[@JakeWeihe]

The Ridgid 2.0 Drawers are a great addition to that system!

[@bobtanner5169]

Great video. I am Hart guy dUe to price and clear lid. Some kaisen foam and you will look like a pro.

[@JakeWeihe]

Nice. Just watch out for leaving any foam in a box with a clear lid. Sunlight can melt the foam

[@crashconstructionunfiltere3829]

I’m using the rigid 1.0 system and am liking what I see in the 2.0 system. Only thing I don’t like about 2.0 is the handle on the bottom box doesn’t seem to Telescope down, but you can remove it so not too much of an issue.

[@davids8493]

Nothing beats experience in this field. You truly need to experience all of the pros and cons of each system to see what works for you in your line of work. Think deeply about what you will and won't encounter in your daily tasks. Do you have some money to invest in your future or are you on a limited budget? The answer to those 2 questions will point you in the right direction. I have several offerings from several manufacturers and nobody does it all for the price that you want to spend. It can be a minefield.

[@porkchop7652]

I'm a packout guy, Love it, but most of these options are not available in the UK unfortunately. The big systems here are makita, bosch and dewalt, but milwaukee is starting to catch up here now. Some of the brands like rigid are really hard to get here and more expensive than the packout if you can find them. The flex looks great, I wish we could get hold of them here.

[@darrellkopriva9260]

I run with the DeWalt tough system myself. A few things not mentioned in its versatility is they also have a large cooler, a cordless battery charger box, radio, open crate and large tool bag that can lock into the rolling stack. I do believe DeWalt took a step back on a few design mods from the tough system to the 2.0 system (unfortunately), but it’s hard to not recognize the versatility of the brand that can be cross comparable across several lines of 2 brands that can be moshed together. Just saying.

[@InuranusBrokoff]

​@adamwest3266 I've been a milwaukee user for over er a decade but recently purchased a Dewalt drill, no hammer function, because they are better than milwaukees. That being said my battery charger stopped working in less than a year, and so did the one for the flexvolt saw I bought. I've never had a milwaukee charger stop working, ever.

[@ibby81ae]

I own the Dewalt toughsystem 2.0 and hated to unlatch each box, then I bought the DS carrier which is a game changer for me.

[@doug2078]

Well done !! Gives me a great starting point !👍

[@madbr3991]

I bought the hart 3 piece rolling kit. In 1 week The plastic cracked very easily. When I went to get a replacement. They were out of stock at 6 walmarts.

[@JakeWeihe]

😬. Good to know

[@madbr3991]

@@JakeWeihe it's a shame too. If they had used a better plastic. It would be a very good box

[@Viking63]

I have the husky $90 stacking system. This one works good. The handle does go long enough that I can fit it under my roll-up tarp on the back of my pickup

[@SandyMasquith]

Thanks for putting this all together. I've been trying to figure out a couple systems. I need one for storing leather tools and gear, and one for typical power tools. I think I'll go with Milwaukee for the power tools, but I've been thinking of something a little less spendy for the leather stuff. I need drawers and small items storage. Thanks to your video, I am much more interested in looking at brands like Hart for that task.

[@jamesnm21]

The crafsman tradestock line offers drawers now too as well as tote bags that lock to the stack like Milwaukee and Klein offer.

[@CycloneBooth]

I can't find the Ridgid setup Home Depot says they are out of stock. Where is the best place to get it? Or do I have to buy it separate?

[@JakeWeihe]

It’s only sold at Home Depot

[@CycloneBooth]

@@JakeWeihe Thanks. Darn. They are out and said they don't know if they will restock it.

[@JakeWeihe]

Where are you located?

[@CycloneBooth]

@@JakeWeihe Arkansas

[@billbuesseler6597]

Thanks for the info!

[@JakeWeihe]

Thanks for the comment! 👍

[@dan260140]

I’m in the T-stak/versa and it fits my mobility/needs for what I use it for. They do have options to choose from in that stak. Price is what I also liked but con is I wish they made things like Milwaukee has but other than that T stak is a good system. Overall if I could go back in time I would definitely go with Milwaukee! Spend the extra dollar in my opinion.

[@Lucasr09]

I agree. Versastack is garbage

[@wideglide2153]

You can combine master-force and the bauer boxes. They are the same exact connector and sizing.

[@BrookLindsay]

What are your thoughts on hart Stack?

[@JakeWeihe]

If you’re doing lightweight tasks and want something smaller it’s worth it

[@leslubiesdetienne]

I own a mishmash of tool boxes and I like them all. Anything that helps me keep my stuff organized is great! It would be neat...maybe.. to only have one brand where everything is stackable and interlocking but I doubt it would be that useful. The thing about systainers is that a lot of tools come with them. Bosch/makita/festool/mafell to name a few. All of them are made my Tanos and are compatible with each other. They definitely feel less sturdy and more "shop organizers" than "job site tool boxes". They have slightly more specialized items as well like sanding disks organizers etc.

[@Edgar-ij8eg]

Im looking to upgrade from a sleeved bucket 💀 has served me well

[@JakeWeihe]

👍

[@MorrisDigitals]

Ryobi finally came out with their bin storage for screws and nails and made a half size. May be expensive but it’s tough. Milwaukee is still king.

[@JakeWeihe]

True

[@Viking63]

I just bought the rigid system. I really like that system the way it all latches together and everything. But the big thing was the big box on the bottom and the handle comes off so that I can load them in my truck with a cover on. Honestly, I bought this system for vacationing. When I go to my condo units I can put everything in it and stack it and I really like the larger wheels on the Ridgid system. They go up the stairs and do not catch the cement where my husky system. Honestly I busted the bottom of one of the handles. It has an affected the system but it caught on to the cement

[@NonieTools]

I have tradestack big boxes and drawers which i love. Then i use an adapter to stack my tstak/ versastack boxes and drawers. There's SO MANY options. On top of everything i use the toughcase bit boxes from craftsman and dewalt. They even connect right to the adapter. It's nice having access to boxes from 3 different brands. So many choices.

[@JakeWeihe]

Nice! Definitely some neat advantages to that system

[@adamwillis1299]

Be good if the bottom and middle box could have sliding interlocking base to connect bottom and middle so as to be joined, thus increasing the height and available space on the inside for 500mm or 25inch high tools.

[@ashleyweihe1431]

Great video!

[@Ckayt]

Kinda want to try out the Klein Tools Modbox. I think the side attachments are a sick idea.

[@JakeWeihe]

Have you watched my first impressions video yet?

[@Ckayt]

@@JakeWeihe yep! Helped me make up my mind actually. Thanks! I’m gonna drag in my Modbox on site next month and put it right next to 20 Milwaukee pack out towers (no joke) other guys have

[@JakeWeihe]

Awesome! Haha

[@ericconnelly566]

Well done!!! Thank you sir!!

[@JakeWeihe]

You bet!

[@spencerfelton9505]

Does anyone here know if there is any type of Milwaukee Packout to Ryobi Link adapter plate that would allow me to attach a Ryobi link box to my Packout stack?

[@citytonightproductions]

Flex above the rest! What an amazing stack pack and the tools are top notch

[@ianstroup9507]

great presentation. If able, possibly using "tier maker" to appropriate your opinion of where these rate.

[@JakeWeihe]

Ooo I’ll have to check it out!

[@joshuaellison01]

With the launch of Makita's new MAKTRAK modular storage system, I think we’re seeing an interesting challenge when it comes to choosing the best features from different manufacturers. Each system (like Milwaukee Packout, Dewalt ToughSystem, and now Makita) has its unique advantages, but no single system fulfills all my needs. I don’t have the capability to do it myself, but with 3D printing being so accessible nowadays, it would be awesome if someone could create an adapter that lets us mix and match across brands. Imagine an adapter that attaches to the bottom of a Makita box, allowing it to securely connect with a Milwaukee Packout! That way, we could build a custom modular setup that takes the best features from each brand. There’s so much potential here for someone with the skills to create it!

[@gergemall]

Nice work

[@JakeWeihe]

Thanks

[@Plumbmax]

Great vid so far, commenting for the algorithm haha.

[@JakeWeihe]

Thanks! 👍

[@phillewis1768]

It's packout for me!!!!! Go big red!!!!

[@nitrobenz1694]

I would have liked to see a table with all the side by side scores in each category.

[@Vidar93]

The Husky Build Out brand is essentially the same as the upgraded craftsman brand. I actually really like it and its been what I am leaning towards. The only bummer is there is no holiday sale on it like the other pack out boxes for Milwaukee, ryobi and dewalt at my local HD. It has a pretty decent amount of options at least in store compared to what I have seen with a few others. Its latches are super heavy duty and satisfying and it locks together well. Its around that 150$ price point for a basic 3 box system. As far as systainers go, I have an absolute love hate relationship with them. I use a variety of brands basically from Ryobi all the way up to Festool and when used properly I believe that the systainer system is actually the best out there in particular if you work out of a van. I still think Milwaukee is better for union guys going job to job in a specific trade and you only need a basic set of tools. With the systainers each one is essentially made and comes with each tool and its wonderful using them. They do take up a lot of space however since each tool gets its own box and most boxes don't have much room for additional accessories. And like all festool addons the additional ones you buy for either general storage or organizers can be quite expensive. The one nice thing is both Tanos and Fein have their own blue and orange systainers that interlock and work with each other. The downside is even with Tanos being a knock off brand they are still nearly the same price though the quality is essentially identical. Its great having the tools be able to stack ontoo of the midi vacuum or yhe CT 36/48 and allows me to transport my vacuum and two main sanders with ease but I could definitely see having to bring all of your tools around taking up quite a bit of space. Its a bit love hate relationships, if they were just 75% of the price I would recommend them much much more.

[@Flyingfrogs2y]

I’m a commercial electrician. I have had my Versastak System since 2018. Lifetime warranty and price you can’t beat. And I agree, the wheels are only good for concrete.

[@JakeWeihe]

Nice I forgot about the warranty

[@stephenn3727]

I have had the Ridgid in my truck for many years. Not fancy but super durable and affordable.

[@JakeWeihe]

Nice

[@stacksmarter]

Great video. I wish I had more time to make videos

[@funkmon]

Honestly I think I'm going to go with the bucket

[@JakeWeihe]

Haha whatever floats your boat

[@derekmoen5382]

Good video man!! I think the Toughbuilt StackTech is going to be badass when they release the new stuff this spring. Personally not 100% impressed with the flimsiness of some of the Packout products the StackTech is way beefier where Milwaukee lacks StackTech has an issue where you cant stack the full size boxes on the half boxes but they are addressing that right now and will have an adapter they are dropping 200 plus accessories this spring and I think its just a start for them. And their prices are great!!! Im a big milwaukee guy but just not to sure about some of the packout products

[@jronmanbuilds]

If it wasn't for Tanos Systainer Classic (early 90's), modular tool boxes as we know it might not be a thing. I have a number of Systainers. I don't have any classics. I only have T-loc and Generation 3. They are not too hard to find if you know where to look. For many the best or easiest way to get them is by ordering them online. I live in a small town and the nearest Festool dealer is hours away. One thing I like is most of my Festool tools come standard even on the "bare tool" offerings. Other brands still continue to throw stuff in blow molded cases or canvas contractor bags. Another thing I like about Systainers is the customization including picking what color of box you want. Another few to throw in there is Makita MakPac, Metabo Meta Box and the revised Meta Box, and Sortimo L-Boxxes (and the various other product lines of Boxxes). I Hikoki had something similar to Mak Pac (not sure if still available). Hikoki also has the Multi Cruizer line. Neither to my knowledge were available in North America.

[@waynewong3880]

You cannot go wrong with any of the premium systems. I had the Milwaukee Packout for over 3 years, but I am waiting for a new version of the rolling box Packout 3 section collapsible handle to become available. THE WORST is the Craftsman, the latches to the lids falls off. I had four of these and all the latches will eventually fall off. This system is designed for home owners or casual users.

[@Omnis2]

Bosch/Sortimo needs a look. Was hoping they would be cheaper and more widely available here in the states

[@JakeWeihe]

If they were cheaper and more available then I would. But they are rarer and more expensive than even systainers

[@Skullman7487]

I decided to go with the flex pack out. Most of the others seemed cheap with plastic wheels or too small. The flex has nice big rubber wheels and hydraulic lid which was why I bought it plus removable handle to fit under my truck bed cover. I haven’t used their tools yet and probably won’t because all my tools n batteries are dewalt and craftsman.

[@JakeWeihe]

The flex wheels are pretty nice. However the weight adds up fast

[@Skullman7487]

@@JakeWeiheI honestly bought it because of the noise the hydraulic lid made when opening, that got me😂😂😂😂😂 and I like the color

[@dsgamecube]

The DeWalt Toughsystem rails singlehandedly got them my money. Being able to pull out arbitrary toolboxes from my rack and stick them in the carrier is really nice. I'd also say that the ToughSystem 2.0 latches are the best of the side latches. They fasten when you set the top box onto the bottom without needing manual intervention, and when you press them in to remove the top box, they stay open until you lift it. This means that you're only poking the latches briefly when removing the box and never touching them at all when setting it down. If you have to use ToughSystem 1.0, however, e.g. because DeWalt decided to remove the rails from the 2.0 organizer for some absurd reason, you're stuck with possibly the worst side latches available. They're fairly secure, but they're a major pain to connect and disconnect. They are still compatible, though, so you can get 2.0 where available and only occasionally resort to 1.0.

[@JakeWeihe]

I agree. Flex tried copying dewalt with spring loaded side latches but didn’t really make them better. The side rails are definitely convenient

[@darek9754]

I've had this Dewalt tower at home. For some 20 minutes before i returned it. The lid of rolling toolbox was so shifted to the front that it barely touched the gasket at the back of the box. So, with IP65 rated water resistance rather questionable, off it went back to the store. (Off topic - when back home from the store, I made a wooden toolbox - guaranteed tough).

[@Loveoldies50]

I went looking for the Bauer modular you have here, but couldn't find it. Tge one I DID find was just 1 big box, basically. I'm a disabled 73 year old woman. I need something easy to use and organized. What do you suggest? I have hand power tools, too. I found your links and video confusing. You bounced back and forth too much.

[@JakeWeihe]

Maybe hart stack from Walmart? Lightweight, and it has boxes, drawers and organizers.

[@justkurt7716]

Absolutely love my rigid 2.0, love the little organizers. Still waiting for them to Release more accessories💀

[@JakeWeihe]

I haven't seen the little organizers in months!

[@SkhandisaNyembe-gb1zh]

How do I order one , please tell me or where to get in south Africa (Johannesburg)

[@framergod69]

I have some of the Makita boxes they are the older version of festool by Tano they are great for drywall knives and trowels and in another I've got my tile trowels . my cordless compressor brad nailer and pin nailer are in a 3rd there is a small box for each with the accessories for each. they cost half what festool stuff cost the latches are the only down fall

[@rogelioybarra4068]

I got the milwaukee and it is tough and still rolling I have a pack out stack

[@JakeWeihe]

Good choice

[@JbobFishhead]

I’d like to see rigid to have more options on their 2.0 system. They have a good build quality at a great price point. 4 wheel cart option and I would be sold. Such a competitive market which makes it so hard to choose.

[@kennethbrunke2414]

I use my tough built roller and carrier and they stack just don't latch😅

[@JakeWeihe]

The tough built stuff is good.

[@anthonyjohnson100]

You always get what you pay for. Milwaukee is the best with enough options and will outlast the others.

[@JakeWeihe]

Kinda true. Depends on who you are. Many other commenters talk highly of cheaper brands that do everything they need them to do

[@politicalpolarbear]

With the Ridgid system, have you seen issues with the handles breaking? There are TONS of negative reviews of the extendable handle breaking after only a couple days of use and it's made by the company "Keter" not Ridgid itself. Have you encountered any such issues?

[@JakeWeihe]

No I haven’t. I’m historically very careful with my tools so I don’t expect any issues. But for guys loading it up to the max, and chucking it into the truck by the handle then there might be

[@vividad3666]

very confused of round 1-5 why don't compare between group before