Jaw-Dropping Updates on the 1999 KX250 Pro Circuit Splitfire Bike Build

It's been tooo long since you have had an update on the 1999 Kawasaki KX250 Pro Circuit Splitfire bike build series. In this video I share the insane updates that have being going on the last few months to get this two stroke bike ready for the complete rebuild.
Show your support of the channel for free! Any tools or parts that you need for your bike, please shop through the Rocky Mountain ATV/MC link below. When you do this, you are directly supporting me and this channel. Thank you 🙌🏼
🔥Rocky Mountain ATV/MC: www.rockymount...
🔥Cameron Niemela Go Fund Me: www.gofundme.c...
🔥Thank you to Fletcher's Cycle Services their expertise in taking care of the 99 KX250 case issue. If you would like to fix the oil port hole issue on your two stroke engine cases, please reach out to Fletcher's Cycle below:
PHONE & EMAIL:(901)-743-6948 [e-mail]
Fixed Case Issue Video: • Untold ISSUES with KX2...
🔥www.rockymount...
Engine Tear Down Part 1 Video: • See How Easy It Is To ...
Engine Tear Down Part 2 Video: • 92-04 Kawasaki KX250 E... E
1999 KX250 Splitfire Rebuild Series - Part 1: • New Two Stroke Project...
1999 KX250 Splitfire Rebuild Series - Part 2: • SOS I Need Your Help |...
OEM vs PC Kit Suspension: • The Shocking Truth: Pr...
🔥Rocky Mountain ATV/MC: www.rockymount...
🔥JIS SCREWDRIVERS: www.prymemx.co...
🔥TUSK CRANKCASE SPLITTER: www.rockymount...
🔥TUSK CRANK PULLER/INSTALLER: www.rockymount...
🔥TUSK BEARING REMOVAL TOOL: www.rockymount...
🔥TUSK CRANK BEARING REMOVAL TOOL: www.rockymount...
🔥Amazon Crank Bearing Puller: amzn.to/3NnfuMr
🔥EXTENDED BLIND BEARING PULLER: amzn.to/3p7oI7d
🔥Vapor Blasting and Zinc Plating Services: / moto_resurgence
[e-mail]
🔥SOCIAL MEDIA: Instagram: / greghitchko [e-mail]
🔥EMAIL [e-mail] with any questions or inquiries
🔥RMATV/MC OEM Parts: www.rockymount...
🔥PROX PISTON KIT: www.rockymount...
🔥MOTION PRO TORQUE WRENCH ADAPTER: www.rockymount...
🔥MAXIMA 80W MTL TRANSMISSION OIL: www.rockymount...
🔥MAXIMA COOLANOL: www.rockymount...
🔥MAXIMA QUICK MIX CUP: www.rockymount...
****TOOLS****
🔥DEWALT IMPACT GUN: amzn.to/3wQgTl8
🔥DIGITAL CALIPER MEASURING TOOL: www.rockymount...
MUSIC: EPIDEMIC SOUND www.epidemicso... This video is NOT sponsored.
Some product links are affiliate links which means if you buy something I'll receive a small commission.
Thank you for supporting the channel!

[@Blakely829]

Fletchers is less than 25 mins from me and I never been there. I have to check them out now. Great video

[@GregHitchko]

Dude you've got to check it out! Fletcher is a wealth of knowledge and Brandon at the counter is really cool too. Let them know you saw my video when you go!

[@KIPSSYTEM]

Congratulations on the baby

[@GregHitchko]

Thank you very much my man!

[@brettlaage9687]

Can’t wait!

[@GregHitchko]

Thanks Brett!!

[@aussiedigger1441]

Wow, Greg that’s going to 1 of the best restoration I've ever seen. That gearbox is going to be like butter to shift! Can't wait to hear it run

[@GregHitchko]

Thanks dude! I can't wait to try the gearbox out either, should be buttery 🙌🏼🙌🏼

[@MasonLichfield11]

Love to see it Greg!, never miss the mark being dedicated for these builds!

[@GregHitchko]

You the man Mason, thank you so much for all the support as always 🙌🏼🙏🏼

[@PremixandPedals]

Awesome video!!! That is going to be so sick!!! I jist wanted to let you know that there is some type of audio issues with this video!!!

[@billroberts7889]

Looking forward to build. Congrat's on your up coming new addition to your family.

[@GregHitchko]

Thank you on both accounts Bill! It's about to be full throttle lol

[@Hyngyynj]

I’m excited

[@GregHitchko]

Cheers dude!!

[@ryanphillips3916]

That is going to sound and look mint!!!!

[@GregHitchko]

Cheers Ryan, can't wait to get it together 🙌🏼

[@danpoxon2425]

Itching to see this bike built up Greg I come on utube daily to see if you’ve posted you’ve got some proper bad ass parts to go on it this bikes gunner look sweet

[@GregHitchko]

Thank you Dan!! We're getting close over here. I need to edit up some content for the engine rebuild as we speak! Follow along on instagram too for more real time updates too. Hopefully have some more videos very soon🙌🏼. I appreciate the support man

[@danpoxon2425]

I’ve not got instagram Greg but gunna get it sorted 👍🏽watch this space 👌🏽and congrats on the birth on your new born

[@bretwagner818]

Going to be awesome Greg 👍🏻

[@GregHitchko]

Thank you Bret!

[@DJROB]

Motivation to start on my 96

[@GregHitchko]

Heck yeahh! I support that move. Keep me posted on it dude

[@chrisvids1820]

Wow. This bike is going to be immaculate! It might hurt to see it get dirty on a ride

[@GregHitchko]

You're telling me haha. It always is tough to get it dirty for the first time. I go ham on cleaning it right after haha

[@zodzod9378]

Looks great but must have cost loads to get were you are nice vlog can't wait ! Little john from the Uk

[@GregHitchko]

Thanks my dude! Let me tell you, these rare PC parts and carbon fiber were NOT cheap. I try not to think about it haha

[@chrisr.1391]

Lets go!!!

[@GregHitchko]

Getting closer!!

[@Thepianobird]

the micro polishing also reduces friction so the oil will last longer and you might pick up a 1/2 horse.

[@GregHitchko]

Great points right there! Thanks for including that👍🏼💨

[@coloradodirtbike5930]

Damn that frame is bright 🌞 but soo fresh, this builds exciting. What color black is that cerakote on the pegs? Glacier black? And btw, use mc-5100 cerakote to clear your swingarm and any other polished/brushed aluminum.

[@GregHitchko]

Great tip on the clear cerakote! I've been wondering. Could probably do it on a pipe too. It's called Armor Black. Black but not too black 👍🏼

[@coloradodirtbike5930]

@GregHitchko nah can't clear cerakote the pipe. Cerakote clear is only good for 300 degrees. But I have seen some people coat raw works pipes with high temp clear, I think VHT makes it. I already contacted cerakote asking about the exhaust pipe and what clear they sell that would work best, and found out none of them would stand up to the temp. If you wanted to actually cerakote the exhaust with a color like black, c series air cure is a good option, heat tolerant up to around 1,800 degrees. Nice build, I'm following and can't wait to see more.

[@jered1940]

Nice 🎉

[@GregHitchko]

Thanks dude 💨💨

[@Peader12]

Hey Greg, can the carbon fibre lower skid plates be bought or were they a special order for your bike?

[@GregHitchko]

They were special order from my buddy Matt Westbury in Australia. He has them replicated every once in a while

[@socratesramirez4620]

👍🏼👍🏼

[@GregHitchko]

Cheers dude 💨

[@fmradio42]

I was just thinking the other day I wish I kept my 1993 CR250

[@GregHitchko]

Right?? I had a 90 CR125R that I would absolutely love right now. We wonder what happens to our old bikes lol

[@John-od7xw]

Can't hear your voice over. Volume at max.

[@clintonpaul3516]

Sound ?

[@GregHitchko]

Sound up!!!💨

[@chrisr.1391]

Forks look sweet….

[@GregHitchko]

Thanks Chris! Really pumped on them

[@nicnadu0515]

Sound messed up😂

[@GregHitchko]

Sounds wicked eh mate?!!

[@davidcasias3264]

Your sound is messed up on this video check it out

[@GregHitchko]

Good ear mate ;) I had to do a voiceover on a couple things. Thanks for looking out 👍🏼

[@DahlDefense]

bro shoot the talon hub. im a broke version of you on god... i could do what we do 24 hours a day but i gotta eat and shit and sleep so... im just poor and got a new baby. but i wnt you to check out my 97 kx

[@GregHitchko]

Congrats on the new baby dude! I feel you. The 97 is a ripper too!💨