JBugs - 1966 VW Beetle - Engine Installation

  Рет қаралды 36,541

JBUGS

JBUGS

Күн бұрын

Пікірлер: 34
@malkucken
@malkucken 5 жыл бұрын
So glad you made a video on engine installation. There are plenty of videos on engine removal.
@DarkHorseParatrooper
@DarkHorseParatrooper 4 жыл бұрын
Thank you. I've hot a 69 KG and was wondering how to mount the engine. Lifesavers.
@oldnoname12
@oldnoname12 3 жыл бұрын
Thanks for this, plenty of videos telling you how to get it out but barely any on putting it back in! in my opinion a lot harder than taking it out.
@tomdunigan234
@tomdunigan234 Жыл бұрын
Very straightforward explanation. Thanks.
@MoltenWhale
@MoltenWhale 7 ай бұрын
Firsttimer here. Having trouble with the Driver's side Upper Bolt(removing). Any tips or hints? Got the bolt off, but just can't reach the underside.
@Sam_Mebane
@Sam_Mebane 7 ай бұрын
I usually use a long extension and a ratchet to remove the bolt.
@MoltenWhale
@MoltenWhale 7 ай бұрын
@Sam_Mebane been trying that, but between little moving space and rusted in there, little guy ain't coming. And naturally, this is the last bolt to remove before I can pull the engine.😬
@anthonybeasley6014
@anthonybeasley6014 Жыл бұрын
Can I install the motor before I put the body back on or does the body have to be installed first then the motor?
@Sam_Mebane
@Sam_Mebane Жыл бұрын
I am pretty sure VW installed the engine before the body was installed, but they had a lot more practice than I have! I would highly recommend installing the engine after putting the body back in place.
@IAm1InTheIAm
@IAm1InTheIAm 2 жыл бұрын
In my BUS it's a real pain to reach around the back of the fan housing and get a nut on the D bolt from the starter....tricks/tips?
@Sam_Mebane
@Sam_Mebane 2 жыл бұрын
The engine compartment in the Type 2 is much larger than the Beetle so I've always found the nut easier to access in the Bus. There is plenty of room to reach around the side of the fan shroud, provided the battery is out of the way.
@brandonwilson7468
@brandonwilson7468 Жыл бұрын
I and doing my own wiring harness on my 71 right now and I can’t fit the engine back up through my engine bay I only have a 1776 motor but the generator sticks out too much and hits the frame for some reason you guys made it look so easy like it just slipped right up in there any tricks or advise
@Sam_Mebane
@Sam_Mebane Жыл бұрын
Only thing going for us was experience. It's a tight fit and a balance act between leaning the motor forward and back to clear the generator shaft, just take your time, you'll get it!
@Sam_mila
@Sam_mila 4 жыл бұрын
Love your videos and products
@renragged
@renragged 5 жыл бұрын
I'd like to see an installation video of a dual-carb engine. I have yet to see one of those.
@Sam_Mebane
@Sam_Mebane 4 жыл бұрын
The installation of the engine is the same. The hard part there after is then installing the carburetors.
@renragged
@renragged 4 жыл бұрын
@@Sam_Mebane Thanks. I wasn't sure if they could be installed with the carbs on. I didn't think so, but now I know. 👍
@pinktaxilimited1690
@pinktaxilimited1690 5 жыл бұрын
Amazing I got mine getting fitted I got a 1971 bug
@VWLifeVW
@VWLifeVW 5 жыл бұрын
nice concise easy to understand how to video!
@bacres
@bacres 4 жыл бұрын
Hey Jbugs.. I have a 1600 going in an early bus.. my engine seal has the double flap.. should both flaps be above the tin, or should the tin sit between the double flap seal?? BTW.. love the video's.. TIA..
@Sam_Mebane
@Sam_Mebane 4 жыл бұрын
The tin sits between the flaps.
@josephjimenez7416
@josephjimenez7416 5 жыл бұрын
My 1776 has an alternator but i want to put my 1600 with a generator in my 68. Do i have to change the wires as well???
@Sam_Mebane
@Sam_Mebane 4 жыл бұрын
The voltage regulator has to be wired up correctly otherwise the generator won't charge.
@peteyabrad_2juntunen635
@peteyabrad_2juntunen635 5 жыл бұрын
Could you guys do a final timing with advance and everthing video? That would be really helpful
@JBugsVWParts
@JBugsVWParts 5 жыл бұрын
We always set timing advanced, and show the process in this video: kzbin.info/www/bejne/hJuuqaeYjtuGnNE and here: kzbin.info/www/bejne/bnaUgnZugJ5_oq8
@Sam_mila
@Sam_mila 4 жыл бұрын
My 69 vw bug tin has extra venting ??? Need help
@Sam_Mebane
@Sam_Mebane 4 жыл бұрын
Give us a call at 1-800-231-1784 and maybe one of our techs can assist you.
@joewoodchuck3824
@joewoodchuck3824 4 жыл бұрын
I was disappointed you didn't go over the conversion to 12 volts. Nice video otherwise. '66 was the model year I had from new.
@Sam_Mebane
@Sam_Mebane 4 жыл бұрын
We probably won't do a all in one conversion video as the conversion is a number of small steps (changing out bulbs, relays, the coil, etc) and one major step, changing out the generator. We did do a alternator conversion video: kzbin.info/www/bejne/iWGYoXuEhJyFh9k which covers the most difficult portion of the conversion.
@humbertoturbodantasdefatim6150
@humbertoturbodantasdefatim6150 5 жыл бұрын
👍🇧🇷
@OrignalRobRobert
@OrignalRobRobert 6 ай бұрын
It never goes that easy
@Sam_Mebane
@Sam_Mebane 6 ай бұрын
Except for when it does.
@shawnm3839
@shawnm3839 5 жыл бұрын
You forgot to throw away the generator and put an alternator on.
@JBugsVWParts
@JBugsVWParts 5 жыл бұрын
We didn’t forget anything as the car was not ours to change. There are plenty of VWs out there still running a generator and we’ve already covered swapping out to an alternator.
[BEFORE vs AFTER] Incredibox Sprunki - Freaky Song
00:15
Horror Skunx 2
Рет қаралды 20 МЛН
VW BEETLE ENGINE REMOVAL - Super Beetle - EASY - DIY
22:40
Slades VW Beetle
Рет қаралды 37 М.
VW Beetle Engine Installation
18:33
G Squared Garage
Рет қаралды 10 М.
1967 VW Beetle - Dropping the engine and more clean up!
11:57
VW BUG FLYWHEEL AND CLUTCH INSTALL
25:22
Fixin Bugs -N- Stuff
Рет қаралды 13 М.
1966 VW Beetle - Engine Install (4X Speed)
6:11
BeingWolfy
Рет қаралды 106 М.
[BEFORE vs AFTER] Incredibox Sprunki - Freaky Song
00:15
Horror Skunx 2
Рет қаралды 20 МЛН