How I connected my Mac and PC to ONE monitor with ONE Keyboard and Mouse!

GET YOUR FIRST MONTH OF AKKO INSURANCE FREE: akko.pxf.io/6b...
Ultimate PC/Mac Hybrid Setup: • The Ultimate Hybrid PC...
A couple of weeks ago I made a video about my “Ultimate PC/ Mac Setup” and you guys seemed to really like it, but one of the questions that I kept getting was: “How did you get the Mac and PC to show up on one screen?”
Well in this video I will be going over step by step exactly how I accomplished this, and hopefully after watching this video you will be able to implement some of these things into your setup!
What I used:
Audio Splitter: amz.run/4lGP
Thunderbolt Dock: amz.run/4lGO
Monitor: amz.run/4lGN
Keyboard: iqunix.store/p...
Mouse: amz.run/4lGM
Thanks for Watching!
If you like my content be sure to check out my other videos!
Orbitkey Desk Matt and Nest: • OrbitKey Deskmat + Nest!
Sony WF-1000xM4 Review: • Sony WF-1000xm4 Review...
RED vs iPhone: • iPhone 12 Pro Max vs RED!
Echo Buds vs Airpods Pro: • Airpods Pro vs Echo Bu...
Echo Buds gen 2 review: • Echo Buds Gen 2 Review...
Year 1 of KZbin: • How Much I Made in My ...
Why Android is Better than iOS: • 5 Reasons that Android...
Why iOS is Better than Android: • 5 reasons IOS is BETTE...
IQUNIX F96 Review: • IQUNIX F96 Review - Th...
UE fits vs Airpods pro: • UE Fits Vs Airpods Pro
UE Fits Review: • UE Fits Review - Comfo...
Magic Keyboard 1 Year Review: • Magic Keyboard Review ...
Herman Miller Embody Review: • The Best Work From Hom...
Note 20 Ultra 6 Month Review: • Note 20 Ultra Review -...
Whats in My Bag 2021: • What's in my Bag 2021!
Beosound A1 Gen 2 Review: • B&O Beosound a1 Gen 2 ...
Galaxy Note 20 Ultra vs Galaxy Z Fold 2: • Z Fold 2 vs Note 20 Ultra
Galaxy Note 20 Ultra Review: • Samsung Galaxy Note 20...
Desk Setup Tour 2021: • Work From Home Desk Se...
JBL Partybox 310 vs 300: • JBL Partybox 300 vs 31...
JBL Partybox 310 Review: • Partybox 310 Review - ...
Z Fold 2 - 3 Month Review: • Galaxy Z Fold 2 - 3 Mo...
Airpods Max Review: • Airpods Max Review - P...
Airpods Max vs Bose 700: • Airpods Max vs Bose 70...
NOMAD Base Station Pro: • Nomad Base Station Pro...
Homepod Mini Review: • Homepod Mini review - ...
Airpods Pro After 1 year: • Airpods Pro After 1 Ye...
Galaxy Z fold 2 1 Month Review: bit.ly/2H0ubGR
Beats Flex Review: bit.ly/3lfreBf
iPhone 12 pro unboxing: bit.ly/352Aens
Bose Quiet Comfort Earbuds vs Airpods Pro: bit.ly/3p3fTGy
Bose Quiet Comfort Earbuds Review: bit.ly/31VHjV3
Galaxy Z Fold 2 Review: bit.ly/3dA9fCh
Galaxy Watch 3 Review: bit.ly/2FgocwS
Bose Noise Cancelling Headphones 700 vs Sony WH1000XM4: bit.ly/3cIRCA7
Samsung Galaxy Z Fold 2 Unboxing: bit.ly/3iVGd25
Sony WH1000XM4 Review: bit.ly/3mxic3w
Canon M50 Review: bit.ly/35HeEG6
Blue Yeti Review: bit.ly/3m9CBLG
Galaxy Buds Live Review: bit.ly/2YBhJTx
Raycon e55 Review: bit.ly/3g32QPR
Partybox 300 Review: bit.ly/3inaFkX
Airpods Pro vs Sennheiser Momentum TW2: bit.ly/3fte8wo
Sennheiser Momentum True Wireless 2: bit.ly/2Epse5n
Airpods Pro Review: bit.ly/3hTQgVi
Note 10 Plus 1 year later: bit.ly/3jiETXH
Top 5 reasons to get an iPad Pro! : bit.ly/2YTxmVO
Boosted Mini X Review: bit.ly/3hW8Jka
Magic Keyboard Review: bit.ly/316BtR5
Bose Noise Cancelling Headphones 700 Review: bit.ly/2VcnvcK
My Gear:
Camera: Sony a7iii: amzn.to/3eeoCPS
Lens: Sony 16-35 f2.8 GM: amzn.to/2Z7CI16
Lighting: Godox SL60W: amzn.to/38Ao0m6
Light Modifier: Neewer 25 inch collapsable softbox: amzn.to/3e8g6BV
Tripod: Manfrotto Befree Advanced Carbon Fiber: amzn.to/3f9xCXs
Gimbal: Zhiyun Weebil S: amzn.to/2O4onMo

[@Winfrid14]

I've been watching videos about this keyboard and mouse for 2 PCs for almost 2 hours, and yours are THE ONLY ONE with complete explanation, there's always some things missing in other videos. Kudos man!

[@brayzinski77]

I've been searching all over how to do this and even went to "The Geek Squad" and they could not help me. You did beyond a phenomenal job in explaining the process! Thank you so much!

[@jchen_tech]

Glad you found it helpful!

[@javaman2883]

I started using Synergy at work in 2011. We had a Windows desktop for all the business apps, and a Linux workstation for the development, testing, running virtual machines, etc. It works great for us. Around 2016 we got MacBooks for testing on those as well, but we didn't get an additional monitor, we use the MacBook display directly. Adding the Mac as a third device was easy. Its great not needing to use that crappy Mac keyboard. Also, Synergy converted its code from opensource to proprietary sometime between 2012 and 2016. Synergy started charging money for the software. However, the original opensource code was branched to form Barrier. Barrier remains opensource. Barrier does not have quite as many features, but all the keyboard/mouse functionality is there. It just lacks the "nice-to-haves" like being able to drag and drop files between the machines, or transfer files.

[@nicolasgaraycochea412]

my mouse is choppy when I switch from my pc to mac, do you have the same problem? do you have a solution for this if you do have that problem?

[@iNilex]

@@nicolasgaraycochea412 LG has their own software if you buy a LG monitor - it's FANTASTIC

[@jacksonville4932]

You can drag and drop files between devices? That is awesome

[@iNilex]

@@jacksonville4932 using Dual Controller you can!

[@lopiphac2873]

@@nicolasgaraycochea412 This is somehow caused by airport/play/drop. Disable awdl0 device and everything is fixed.

[@tolapii]

For anyone who is struggling with a mac and a window laptop to connect it together, I hope this comment can help you out. Try deleting the logitech+ app on macbook, downloading again, and then turn on the firewall. On the option of the firewall settings, choose allow logitech+ incoming connections. I struggled 4 hours w/ that thing and don’t want you to deal w/ it.

[@wunder5776]

Theres a free (opensource) version of synergy. It's called Barrier.

[@arnabiarnab3037]

Thank you

[@Skrenja]

How intensive is it and does it add any latency? Thanks.

[@QueeeeenZ]

@@Skrenja it does add a little bit of latency but not too bad unless you want to do gaming.

[@WiseEyes313]

Hi guys tech noob here. i want this same set up but my work laptop restrict me from downloading any apps - is there any way around this? I basically have two separate laptops connected to their own monitors (so two laptops and two monitors in total). I wanted to use the same mouse and keyboard for both without having to always click a button to tell the system I now want to type on the second laptop. Etc. Any suggestions that can override the need to download an app?

[@sayanpal9491]

@@WiseEyes313 Buy a kvm switch

[@jahneeseyero7362]

random comment but you honestly look so kind and safe. Love how you read comments and take in suggestions.

[@jchen_tech]

Thanks!! Always gotta keep you guys in mind 🙏

[@sickie1961]

Thanks for helping me decide on a monitor. I just got an imac mini, so I needed a good monitor to use for the mini and my pc. It's nice to see someone actually showing it in action for a change. Once again, thanks :). BTW Synergy is awesome as well, as it allows you to copy/paste between both machines

[@otter-pro]

I use Synergy to share single keyboard/mouse with 2 PC and 1 Mac (and sometimes Raspberry Pi as well). I DON'T recommend audio splitter! Instead, use the headphone out of mac to line in of PC, and then enable monitoring in windows audio. The better solution would be to use a simple audio mixer like Behringer, which costs around $80+, but well worth the price.

[@javaman2883]

The audio mixer is very useful here. Not just to make fast adjustments to the volume of each, but also in sound clarity. Due to the capacitance/inductance of having the output stage of two sources being connected together, it does weird things with the frequency response. Imagine a multi-band equalizer where someone decides to just crank one way up, and another one way low, but the rest are all in the middle. It generally sounds muffled but may have prominent high pitch sounds that are not desirable.

[@jacksonville4932]

Thank you so much

[@protector7886]

This was sooo helpful. Thank you for posting this. Synergy was way cheaper and easier to use than a keyboard that you need to click the button every time to switch.

[@lhxperimental]

1:57 You can't merge two outputs like this. This is like shorting. One driver could be trying to raise the voltage (that's how speaker outputs work, by dialing voltage up and down at audible frequencies) and the other could be actively trying to pull it low. This causes a tug of war between the two and they may even burn each other off. You have to use a mux chip to do this properly. There could be some product that uses a mux chip, use that instead.

[@giusemunafo5203]

in tal caso, posso utilizzare due computer Windows? Sì

[@nasound42]

Thank you! I've pretty much adopted the same setup and frankly it's unreal to switch so seamlessly between my work and personal computers

[@somdobomk]

If you’re using an LG monitor, they have a program called Dual Controller. It lets you manage preset window layouts and you can do everything synergy does.

[@coryharris18]

I havent been able to get it working on my LG38wn95c... do you know how to set up dual controller with it?

[@somdobomk]

@@coryharris18 as far as I know you just install the program “OnScreen Control” and probably have to restart the pc and that’s it.

[@Diamondblend]

so you're saying, no need for synergy? it'll let your mouse flow from Mac to Pc smoothly?

[@somdobomk]

@@Diamondblend unless something has changed, yes it lets your mouse flow between Windows and Mac smoothly.

[@Diamondblend]

@@somdobomk sweet. thanks!

[@stephengibellini2987]

But in this case server needs to be always on or at least on when you want to use second PC. I recently dealt with this problem myself but I had an added computer of my significant other who could also connect to the dock. I solved it using a KVM (usb only). Set up 2 Monitors 1 Dell Docking station ( For any laptop to come and use desk) 1 Desktop PC 1 KVM switch Desk top and Docking station connected to both monitors in independent inputs. They both connect the USB to the KVM and all my USB peripherals are connected to the KVM ( Keyboard, Mouse, Headphone USB dongle). I opted not to go for a more fancy KVM with HDMI multiplexing since the monitors had plenty of inputs and getting the best performance for the video output requires more high end KVMs. Whenever I adopt some speakers on the desk I will incorporate the 3.3mm Jack splitter or find alternative solution. Maybe with more high end KVM if I don’t need to use at same time.

[@Sushi_219]

Imagine playing val with this setup, and watching quick lineups if your main is taken. Perfect !😁

[@kwhite101]

Microsoft's Mouse without Borders works much the same as Synergy...but it's free. I have an MX Keys and MX3 connected by bluetooth to both my work laptop and personal PC. They switch to whichever monitor you are moving to. You can also cut and paste, etc between devices.

[@dieks77]

Yes, however Mouse Without Borders only works on Windows. If you want to use a Windows computer and a Mac (or even Linux) you have to choose something else. In such case Synergy is a perfect choice.

[@largewallofbeans9812]

I'm thinking of having a Mac/PC hybrid setup similar to yours, and Synergy is going to make my life so much easier.

[@robbiebacolod]

Thanks man! I def gotta try that audio setup and synergy setup. I've been looking for a simple and inexpensive way to do this. Super thankful bro!

[@jchen_tech]

Glad I could help!

[@subramanianesakkimuthu9296]

@@jchen_tech uiuiuiiiuiuiiiiuuuiiu

[@subramanianesakkimuthu9296]

Yea Yea uuiiuii

[@subramanianesakkimuthu9296]

Iiu

[@subramanianesakkimuthu9296]

Ui

[@wesoeric]

Thanks man for the Synergy recommendation, it works beautifully!

[@reallycome1]

Thanks, buddy! Fantastic job and thank you for clearing this up. I am building a Threadripper PC machine for my 3D workflow, but I do not want to stop using a MAC setup. To add to your Synergy setup, this is also a fantastic program if your PC is located in another location altogether or perhaps in a different room from where you usually work. I think I will be keeping my PC in the freezer :)))

[@reactionsok]

I like how I can see wires in the background . Great setup. Unfortunately can’t do this with my work computer

[@MoathResume]

Spilt screen option question. Can you switch between two computers displaying at the same time to either one? You are displaying Mac and PC, can u do Mac only, then switch to PC only, and so on? Thx 😊

[@biem1014]

I would also like to know, can someone explain

[@colandru]

Thanks Jesse! Synergy was exactly what I was needing for switching smoothly between computers. Logitech flow is not that accurate!

[@SiDKiLLeR666]

Thanks for the information and LOVE Synergy!!!!!! Game changer!!

[@jd01665]

Sharemouse works great for this also. And I've been using 2 4k monitors side by side mac + pc for 5 or 6 years years now... Try a dual head kangaroo standing desk.

[@jd01665]

Think I got sharemouse 10 years ago with a macbook and PC. Really nice software and when I bring my work computer home, I have 2 pc's and the macbook. Really nice software.

[@MoathResume]

Are your Mac and PC thunderbolt connected?

[@jd01665]

@@MoathResumeFor sharemouse, the computers just have to be on the same network (in my case ethernet). I tend to avoid wireless technologies to avoid EMF but you can use wifi. Thunderbolt I only use for disks and monitors.

[@movdqa]

I've been using Synergy since about 2008. There is a free version (actually a few I think) and I just use that. I have a Windows desktop hooked up to 3 4k monitors, and an M1 mini hooked up to QHD and WSXGA displays and use Synergy to connect them. It isn't perfect as some keys don't get passed through (Windows Print Screen key doesn't pass through for example), and I have to hit the key on the Windows keyboard but there are only a few like that. What I would really love is macOS Spaces where you can flip between Windows and macOS on the same monitor.

[@realkheno]

Agree, if your outputs are not protected, using a splitter you are sending electricity to your output of your other computer and vica versa. Sending el to an output is a dangerous thing. You might smoke your output amps in your audio ouput devices. There are multiple active solutions that will resolve this issue available. Other examples: www.ebay.co.uk/itm/Stereo-Audio-Signal-Mixer-Board-Mix-2-way-4-way-Input-1-way-Output-DC-5-12V-New/264425089409 www.markertek.com/product/ses-ez-mix-01/sescom-ses-ez-mix-01-two-channel-stereo-audio-mixer-with-separate-volume-control-two-3-5mm-inputs-one-3-5mm-output

[@javaman2883]

Barrier is the opensource package that was forked from the original Synergy just before they turned the license proprietary. It supports Windows (XP and later), Mac, Linux, RaspberryPI, FreeBSD, OpenBSD, up to 16 devices concurrently. It supports the all the keyboard and mouse functions, plus clipboard sharing. They say they focus on just the core functionality, make sure it works well, rather than adding nice to haves like drag and drop or file sharing which have other solutions already.

[@movdqa]

@@javaman2883 Yup. And save it if you find it as there's no guarantee that it will be easy to find forever.

[@computercockpit]

I can’t image what if your room equipped with our special chair workstation recline cockpit for multi screens …. Adding not only interesting points but also much more comfortable and more impressive and immersive…

[@SaurabhGangamwar]

You can use logitech option (flow).it have similar feature of synergy

[@mmsoares0807]

You can use Barrier which is a free fork from Synergy.

[@JimKanaris]

This was super helpful, thank you! Synergy should sponsor you! They made some coin off of me!

[@peterosullivan5611]

When Synergy worked, it was awesome. When it failed (it kept giving me a firewall error despite not changing anything in my network) and now is useless. One recommendation they provide is to uninstall then reinstall the software from scratch. Now if fails based on saying that I don't have a compatible OS. I have given up...

[@benjaminolry5849]

Use barrier instead. Free, open source fork from the times when synergy wasn't commercialized.

[@onezero2526]

I know it's a pretty old video, but maybe I'll get a answer. When using this synergy and the PC is the server, are mouse and keyboard working for the macbook when the PC is off or does it always have to be turned on? Btw great video

[@liukin95]

This is basically what I want to achieve! I am a Mac user at home but my work gave me a Windows laptop and I'd like to be able to doc it to my iMac at home!

[@joeyedwin]

Thanks for this! Very helpful.

[@omim1155]

Thank you for this break down!

[@YFTOUCH]

amazing tutorial,very detailed and informative,thanks for your sharing

[@starogre]

if you plug in keyboard/mouse/other usb peripherals to the dock, how does the laptop and desktop pc share them? what cable goes from dock to PC to use all the USB stuff? and what about ethernet cable?

[@heathervo9144]

following. I've been rewatching to see how the pc gets access to the peripherals

[@caverna_dev]

This seems pretty neat. A question though: What if at any point you want to focus 100% on what's going on in one of the 2 devices? Is there a quick way to just switch to 'Full screen' for just one of them?

[@sim_scape]

Thank you for your video ! I do not understand how you can connect your mouse and keyboard to both pc and macbook ? Could you please show us a photo of the detailed cable management of your PC and your dock ? that would be very helpfull

[@Dr.Schlitz]

Logitech Options allows you to use the same keyboard and mouse on 2 computers, but they have to be on the same network. If you are using a VPN on one computer (e.g., a work computer using VPN to log into a work network), then the computers are no longer on the same network and you can't share. I expect Synergy has the same issue, no?

[@ultralaggerREV1]

There should be a button on monitors that allows you to select a port channel, just like in televisions...

[@CBrandonR]

Would you happen to remember which isolation pads you used for your speakers?

[@shing86]

This is cool, but if you need to use only one pc you need to power on both computers, because without server PC you can't share the mouse and keyboard with the other PC. I mean, with macbook you can use the trackpad, sure. But if you have a PC and an iMAC or simply 2 PC, is better to have a multidevice mouse and keyboard

[@BeauBurgess-gt6pj]

Thanks so much for the vid, makes it so much easier. One question though, does this work with 2 monitors rather than 1 ultra-wide? Thank you

[@Trypyyyy]

Thanks for the explanation. I am looking for a seamless working setup for my job and my personal work and this would be ideal, especially the mouse and leyboard sharing between both computers.

[@everstormz]

How would I set it up so that I can use a PC to display on two monitors and then switch to MAC to display on those same two monitors? Instead of having one on each side.

[@friiidrettt]

Can you do the same with a pc and a playstation? I want to be connected to the pc and playstation on the same screen like this.

[@Smile96857]

Love this so much!! thanks for this tutorial! Was thinking how to set things up for my future setup!! You the best bro!! 🔥🔥🔥🔥

[@jchen_tech]

Glad I could help!

[@jasondwyhalo2363]

Great video, Thank you for making this

[@x4ms]

Well, I may try this out soon.

[@thorbjrnhellehaven5766]

There is a risk using an audio splitter cable to merge signals. There is a risk for the output on one device to blow the output on the other device. The splitter is meant to split output for two inputs, not to connect two outputs. I would recommend an active mixer, to avoid the risk of breaking the line output amplifiers. A line output typically has low impedance, designed to be connected to an input with higher impedance. If you connect to another low impedance device, you will increase the stress on the output amplifier increasing risk of blowing it. There are commonly added designs to make them more fool proof, in case of wrong connection, but don't trust on that to save you forever or every time.

[@gabiold]

Exactly that's what I wanted say. It is a bad idea to use that splitter cable as a mixer. That's why the volume drops, because the ouputs loading each other.

[@Sejal08]

Do you have any recommendations for a audio interface that can be used to connect the speakers and microphone to both pc and mac and have them switch between devices easily?

[@LigaBeta]

@@Sejal08 Did you ever get an answer? I'd like to know also.

[@optalgin2371]

Awesome setup! Is it also work if I use 1 monitor? I wanna have one keyboard and mouse for both my mba and pc

[@williamtopping]

Alternatively you can buy a DP KVM Switch for around $50. Ugreen do a really good one. (Also HDMI) You plug your keyboard/mouse dongle into the USB ports in the front. HDMI/DP in the back. And then just press a button to switch between computers. This way you don't need to have a server running at all times. I have my MacBook connected to a dock. Then from the dock into the DP Switch. My PC into the DP switch. And then the Switch into my monitor (LG 38 ultrawide) I also have a USB drive in the switch as well. So I can quickly transfer files between computers if I need to. The UGreen is particular good because it does 8k at 60mhz, or 4k at 240hz. Which is great as my monitor does 166 at 4k 1600p. Also HDR as well... Using the switch is the ONLY way to use my K100 AIR from Corsair on BOTH my computers. I simply plug the Corsair into the switch, and then install the software on both Mac and the PC. This way I have full functionality of the software, macros and lighting. As far as each PC is concerned. It's as though you are connecting/disconnecting the USB. My Mac complains about ejecting the USB drive, but hey. You can silence that if you need to. You don't have to use UGreen, but if you want to use something like a Corsair/Logitech RGB keyboard you will need a POWERED version.

[@seanmyers227]

I was just about to say, the mx masters has some built in 2 computer capability that I've never messed with. But looks like it's not as good as Synergy

[@DigitalCircus777]

Thanks for the information and LOVE Synergy! Great interface and customer support...

[@billybobby7607]

If you're sending two audio sources into one that's a bad idea (two into one) you could overload the speakers

[@siopaoman]

IF one PC has a time tracker on it, will the time tracker capture activity done on both PCs since they're sharing displays?

[@nstrahl1]

I love your set up and plan on mimicking it. The only question I have, is the preamp necessary in order to get audio from both my Mac Book and Surface PC? Thanks so much.

[@Jay-ou7cr]

so underrated channel

[@zacharyedwards2011]

Hey, Love the setup. Question, do you ever have problems with connection going down from the server and having to start it back up? If so how often?

[@41e_83]

Thank you so much for this! I have been working on the same 2 computer setup after watching your previous video and was struggling with some connections. But this one solved them all! Nice video, really helpful~

[@praneshjr5733]

What will you do in case if your server PC is shutdown? It won't work on client side right?

[@Jeff-vj3jp]

Great Video! Couple questions... Instead of a monitor will this work with one smart TV? And, will this work with 2 Windows PC's on one smart TV? Thanks!

[@mariop8161]

Thanks for the instructions! What about limitations? Screen Resolutions and / or Framerates? As Synergy is using WIFI I guess there is also a measureable latency? So i would expect it´s not working in gaming scenarios, right? Thank you!

[@bossman762x39]

I use barrier which is a free version and it works great, latency is not a problem for me. Also if it is a issue just have your gaming pc as the main host and not the client.

[@syednoor5213]

We can make use of KVM switch also works I guess

[@TheMadisonHang]

it'd be cool to coordinate the wallpapers

[@craigheard2504]

Thank you. Great information.

[@halfcalf72]

I’m a lifelong Mac user but I have my first custom PC workstation on the way. My question: If I want to limp my M1 Mac along while I see about fully migrating to the PC, do I use the Mac as the server and use the apple keyboard as my input for both devices while making my keyboardless, mouseless PC the client or should I get a PC keyboard and make the PC the server? I’m told by synergy that though a keyboard and mouse are detected across both platforms that a Wacom tablet will not have the same cross platform functionality. Luckily I have two tablets but I may only plug it into the PC since that will become my serious new workstation. Thanks for any advice you can lend. Great video BTW.

[@andrewmgoss]

Great video, thank you and subscribed

[@jessar82]

Mate!!! Your monitor offers the app for free, "Dual controller"!!!! Are you sure you are not running ads here :D

[@rohitthreddy4564]

Can we split screens using any Smart LED TV instead of using an ultra wide monitor ?

[@pecador805]

What would be a good way to connect audio from both computers to a universal audio Apollo interface?

[@embazle]

Do you have a solution for splitting multiple usb devices between a Mac and a pc? I do have a basic 4 port hub split between 2 computers. In order to expand the 4 port hub I was going to daisy chain additional hubs behind it so that when switching the automagic transfer of 10+ usb devices, this would include my digital mixer, I use the usb interface for the sound and would prefer that it switches between both Mac and PC rather than using a separate audio cable.

[@I.n-10s]

Question: I have 2 Monitor and 2 Laptop each connected to their own Monitor. Will the synergy setup work with two different monitor?

[@bootavo]

Where can I buy a mousepad like yours? What brand? I hope you can help me. You videos has an amazing quality 🙌🏼

[@jchen_tech]

Orbitkey!

[@bootavo]

@@jchen_tech thanks a lot broh! Have a nice day

[@bootavo]

Thanks 🙌🏼

[@madmapper9205]

I came across your video today!! Excellent idea. I’ve been searching for a way to keep my Mac Studio and build a gaming pc that can be used on one monitor such as the 49 inch monitor in the video. Your video shows both the Mac and PC on each half of the monitor. What I want to know is can you switch between each one (I.e Mac Studio and PC) independently so that you can use the full 49 inch monitor for either computer??

[@fancypantzz]

Did you find an answer to this? Thanks

[@theawesomerb2807]

just use barrier instead of synergy , free and the same efficiency

[@b69astro]

My question is: in case you want to use the mouse on the mac monitor to migrate to the monitor connected to windows, is it necessary that the application that recognizes such monitors can always be connected to the internet? In case you don't have internet access, can you still migrate from one monitor to the other?

[@jchen_tech]

No, with synergy you always need internet

[@xLoganWong]

Is it possible to switch and run one computer at a time using this dock? If not, is there a device you would recommend that will do that?

[@jasminjurial9389]

Hi Jesse, will your client see the 2nd monitor while you are on zoom?

[@hunter19884]

Instead of a Female to 2-Male Y-Splitter, can I use a Male to 2-Female splitter? My laptop and desktop computer are far apart. The included 6 feet cable is not long enough. My only other option is to use two 3.5mm extension cables, which drives up the price significantly.

[@profphilbell2075]

Is it possible to use 1 ultra wide monitor instead of dual monitors in windows to get the same advantages as having 2 monitors?

[@JohnOcampoYT]

Hey Jesse. Great content! Do you need a monitor that supports PIP/PBP inorder to use Synergy with 1 monitor?

[@chunkyg6715]

PBP doesn’t affect how synergy works in that it will work exactly the same with separate monitors each connected to a separate computer. It will also work with 3 or more computers, multi monitor setups and different operating systems.

[@UIIHIIIH]

This might not work for work from home folks as your company might prevent you from running Synergy on your work pc

[@rostamr4096]

Very helpful...Thank you

[@bohansen2960]

Hi... I have a question. You have two systems on the screen at the same time. One left one right. You would never be "in front" like directly in front of your main work. It would always be either left or right to you. Is that a problem for you? It probably depends on what work you are doing. Would you "shift" your chair to look directly into one of the sides and have the other side as a secondary monitor? If your focus main task is on the left you would probably have to look slight angled into that side and have the other side as a secondary. How do you manage that with a screen that large and displaying tow sources at once?

[@myutubes0]

Not having the stuff you work on right in front is a show stopper, depending on what you work on, for example programming, reading, and writing intensely. When I had 2 24inch monitor setup, I kept one right in front for the main tasks and the 2nd monitor on the side. Using a 34 inch single monitor now.

[@EmbracedDestiny]

Some of these apps through the monitors I’ve seen allow for different size split screen even like one being the full screen and the secondary being top right corner or something and with quick commands being able to switch it. Or have only one show or go back to the split screen

[@EmbracedDestiny]

Some of these apps through the monitors I’ve seen allow for different size split screen even like one being the full screen and the secondary being top right corner or something and with quick commands being able to switch it. Or have only one show or go back to the split screen

[@javaman2883]

I'd been doing that with multiple 24" monitors for years. Windows on one side, Linux on the other side. I sometimes turn my chair slightly, mostly when using web conferencing or watching videos, or when I can just focus on one machine for a while on a task. Often though, I just sit straight forward, and turn my head slightly because frequent communication (Teams/Outlook) requires me to keep checking on the WIndows machine. When remote work started, I got four monitors. I originally had Windows on the two on the left (bottom and top) with Linux on the right, as that is what I was used to with dual monitors for the previous six years. But then I was finding I was heavily relying on the two bottom monitors. So I switched the inputs and put Windows on the top two monitors and Linux on the bottom two. That's been much better for me because I get to use the Linux workstation more effectively with the two bottom screens. For me it's much more effective to just move my attention to left or right monitor rather than switching between full-screen apps. My upper monitors work well for keeping MS Teams always on top since team communication is expected to be quick responses.

[@iantsears]

umm... move your monitor to the left?

[@leemorris13]

What monitor stand are you using for this 49inch monitor? and would you recommend it?

[@Akonanibai]

awesome great video. thanks for sharing.

[@dswartze]

Synergy FTW!

[@PaolaLindenmann]

Now that is has been 3 years, has anything changed? I'm planning to have a similar set up and wondering if you have discovered new tech to accomplish this. Thank you!

[@5002seven]

This nigga mixed Coke and Pepsi. Absolutely curs-ed.

[@kraftdinner.4498]

UR A LIFESAVER

[@aronreis]

What wood panel do you use on your desk to support the monitor+ergotron weight?

[@LuisAlejandroTorresO]

what screen arm are you using in this video and what monitor? Thanks for the video

[@terina2424]

This is an awesome setup. I have a 2020 27" iMac, Windows HP Laptop and a 2015 MacBook Pro laptop that I am trying to use together. I recently purchased the Dell D3100 docking station as well as 2 monitors. I am trying to get all 3 to work seamlessly together using separate monitors but I am having problems trying to figure out what else I need for this setup. Any advice?

[@johntan1594]

Same, I'm trying to connect 2 macbook (2019 macbook pro + 2020 M1 macbook air) into 1 monitor - please let me know if anyone knows!

[@terina2424]

Apple is coming out with Universal control this SPRING (2022) It was in Beta and programmers are loving it. You will be able to control multiple devices including iPad that are on the same Network. But check which Operating systems it applies to. I'm extremely excited about the new features.

[@fourex59]

I didn’t realize that something I have been wanting to do could be done so easily and cheaply. Thanks very much for your video! Really great stuff. I didn’t see the link for the software however. Can you tell me where to find it?

[@kevinfant8948]

Excelant presentation

[@djmic_ez]

can u also share files as well. Can u click stuff from one computer and drag it to the next?

[@rjburn]

I wish there were a way to have a mac and pc both connected to the monitor but using the full monitor, and being able to switch between the mac and pc rather than using one side of the monitor for each one.

[@BretKenworthy]

Thank you!