Let's build a badwater sewer! Timberborn Update 6 Iron Teeth Episode 23

[@jasonjazzz5]

17:00 uncheck the depth setting on the side sluices

[@hallohoegaathet7182]

On all the sluices

[@mikelitoris8809]

When JC is in the kitchen: "It just takes thyme."

[@mikeriley2475]

That badwater sewer was awesome! And 95% accurate to what I thought up when I read "sewer" in the title! Expand the reservoir!? .... It's your first mega build!!!! Do it!

[@darthyetgon]

20:11 really like the over the water tank idea for the tribute of ingenuity😊

[@nurmr]

It's possible to make it symmetrical too (by having one over each of the water tanks).

[@HideyHoleOrg]

Once the good water is fully separated to the edge of the map, end it with some dams or floodgates so that you can retain good water in that section during drought or bad tide. If you put the sluices back in and connect the channel all the way back to your reservoir, you can even keep it all topped off with good water.

[@phill8223]

Don't forget to set up the pools under the apartment complex! Even if you end up pausing them till you have the materials,

[@darthyetgon]

21:45 take the damn reservoir to Max height😊 and if you replace the interior wall that's next to the water wheels in the dam with levees you'll be less likely to have any contamination issues as well

[@urdarkruler2223]

So much awesome progress. I do like the platforms above the water storage, but I liked how excited you seemed about having them in front. I think you should keep it.

[@Struggling_Engineer97]

I vote for Tribute to Inginuity on the sides (Put one on both sides)

[@alexvomalex]

Wow! Awesome progress today. Be certain enough good water stays in the drought in your channel... and I kinda like your cozy comments over the time lapses. Thank you!

[@dragade101]

Filming Tip: @24:31 Instead of zooming, you can use the layer view to slice off extra layers you don’t want. Then you can pan with the camera easier (not being zoomed in)

[@nurmr]

Same at 2:07

[@DJarr216]

The 4 wide sluices are not needed at all, they could have easely been platforms with impermeable floors. The 2 wide sluices you put in after allready do all the seperating work.

[@JCTheBeard]

Those are on the chopping block for next episode!

[@thomasfplm]

2:04 I think you have to put an irrigation barrier on the land 7 tiles to the left of the mouse here to finish closing the passage of contamination.

[@sidmcmillan926]

💓🛠🦫 12:20 ... 4 wide with some kinda catchment pool of big enough size might work 🤔 I think it might need some type of wide/deep enough catchment pool (opposed to it pouring straight in, so to speak) 🤔 ... I forgot we'd already capped the badwater source, doh! 🙄 Just got to the end of the episode. Your division system looks good. it will be interesting to see how *The Sewer* handles both sources inputting badwater 🤔

[@dragade101]

@25:03, I notice this lower oak forest seems to always have trees fully grown and that they are not being cut down fast enough. You seem to have slowed down your log consumption (especially with having so few engines on this map). However to optimise your land use space: check the 'near by' storage choices for loggers. And check which flags reach what part of each forest segment. Likely a gnawing beaver has to go the extra 100+ metres to be the logger they are not. This debugging will let you store more logs and maybe even help more finished products that use a form of a log.

[@alexkudzin4980]

10:34 put the sluice gates on the right side there! If it’s bad water open, if not close Then build up levees/land around the outside to give you another stack of water wheels

[@jasonjazzz5]

10:30 you wouldnt want it in the middle, the bad water discharge side should just go to the bottom, then 1 tile past the other waterfall 2 layers of sluices 2 wide to separate that water there before it mixes with all the guaranteed bad water from the other side

[@jasonjazzz5]

guess ya got there eventually :P

[@thomasfplm]

21:37 I think the size is good. I vote against expanding it.

[@therealmaqs]

The only reason why is not protecting the rim as efficiently as people expect from a center is another reason why he’s so great. He knows he’s not explosive enough in that regard, he knows he’d get in foul trouble too early to be of use for the team. He plays his strength to the maximum. He got steals and deflection to prove it. 2 cents to bank are yours (Yoda voice)

[@thomasfplm]

11:41 You have to make it before the water from the two sides mix up. The fluid from bad water source should go directly to the sewer, the fluid from the good water source should go to a valve system similar to the one that fills the reservoir. 17:38 That's basically it.

[@oledamen8116]

yes please make the reservoir bigger

[@thomasfplm]

25:19 You could put the bad water pumps behind the badwater waterfall.

[@oledamen8116]

I personally think de monument design on the side at 20:04 looks better then on the front

[@brontesundstrom9288]

Make the reservoir the ENTIRE MAP TO BUILD LIMIT

[@Steve-od2di]

tossed a idea for the water sorter for the sewer system on discord :)

[@sidmcmillan926]

13:40 ... just "The Sewer" would work 🙃

[@bubbles69138]

episode 246590834572038726023867169813476324964?? Lemme get the popcorn going :D

[@Devilish_Fun]

[@Drexos17]

🦫🦫🦫🦫🦫🦫🦫

[@Drexos17]

🦫🦫