The engine top end disassembly is complete. In this video we talk about some previous damage, give thanks to the folks on the forums and showcase some of the unique features of this 2.8L CRD engine built by VM Motori,
Пікірлер: 22
@Bill19912 жыл бұрын
“Hardcore enthusiasts” - I call us crazy! So many “unique” things about this engine. I had all the same problems you did when I bought mine with 135k miles. I did all the stuff you did and it’s running good now- 190k miles. The cam/intake/rocker cover is ridiculous piece, esp to install.
@msPaulaA13 жыл бұрын
DAY TONE Ahhh she’s a good girl helping you with your project.
@roberte3622 жыл бұрын
Awesome! I need one of these CRDs
@roberte3622 жыл бұрын
Coool
@hectorestrada5751 Жыл бұрын
Like the video , asking for some help I have a 06 with a no start. The condenser fan turns on as soon as I turn the key on . I can see the coolant temperature sensor at 495 degrees. The engine cranks but does not start . I am think the ecm has a problem. But maybe you can help . Thanks in advance.
@daytonagrayghost Жыл бұрын
Check all your grounds. Behind the battery and in the passenger foltwell and in and around the fuse box to the left of the dash
@hectorestrada5751 Жыл бұрын
@@daytonagrayghost thanks I have an ecm code p0610 and p0564 and p1186 . Thanks for responding.
@daytonagrayghost Жыл бұрын
@@hectorestrada5751 Is your fuel system pressurized and purged of air. Use the bleed valve and prime bulb on the top of the fuel filter to check for fuel and bleed the air.
@maxum25 Жыл бұрын
What's the name of the Facebook page you mention at the beginning of this video?
@daytonagrayghost Жыл бұрын
facebook.com/groups/libertydiesels/?ref=share
@dejanmeki2 жыл бұрын
what's your best mpg y have ever achieved ?
@ygardned3 жыл бұрын
I have the same Jeep, wondering if I should do EGR Delete....do you have any info on that?
@beinthenowmedia76382 жыл бұрын
I can't find one. My EGR to manifold pipe is cracked and no replacement for that either but it is rigged up and been working.
@jeffreybauer64913 жыл бұрын
It is a mistake to use the ARP head studs. American Racing Products does not recommend their products for the CRD engine. The kits that you get from retailers are specified by the retailers themselves; ARP simply fills the orders and has performed no research and development work on the CRD engine because there are not enough CRD engines in the North American market to justify the R&D expense.
@daytonagrayghost3 жыл бұрын
Thanks for your comment and the data you sent regarding the ARP studs. I made my decision to go with the ARP studs on data from several sources. I was on the fence about it and can see both sides. What sealed my decision was when my local machine shop encouraged me to go with the ARP studs.
@moonrider196813 жыл бұрын
Where did u purchase replacement parts?
@daytonagrayghost3 жыл бұрын
IDparts.com
@beinthenowmedia76382 жыл бұрын
06 2.8l diesel question on vicious heater? Can you help?
@daytonagrayghost2 жыл бұрын
What's the issue?
@beinthenowmedia76382 жыл бұрын
@@daytonagrayghost Sounds like dry bearings inside. Do I have to replace the whole thing or can the bearing inside be swapped out? I only ask that because the part is on avg $400 or not available at all. I think also it might have something to do with little cabin heat?
@daytonagrayghost2 жыл бұрын
@@beinthenowmedia7638 I am not sure if they can be rebuilt. Someone on the Liberty CRD Facebook page makes a delete kit for the viscous heater. Perhaps they know if the bearing can be rebuilt. Does it make the noise when only engaged? Perhaps it's the clutch?
@beinthenowmedia76382 жыл бұрын
@@daytonagrayghost I'm not 100% sure, I've read a lot because I'm not an expert and others have listened to it so I'm just going off that. Looks like I'll have to replace the whole thing. I requested the fb group. Hopefully I'll learn more about my jeep there as well. Thank you for your responses.