Jeep XJ 4.0 Cherokee Oil Filter Adaptor O-Ring Leak Repair Replacement Fix

Just a normal guy doing his own repair work. This one is a little tricky because you can't get a ratchet between the frame rail and torque bolt. But you can improvise... Hope you enjoy the video and please subscribe.

[@summerthatcher]

I really appreciate you walking through your troubleshooting getting the bolt to move. I’m dealing with the same issues. Thank you.

[@garyross4122]

Very realistic video! This looks just like what I went through most of yesterday afternoon. I still don't have it loose! Thanks

[@randybarnes8454]

I replaced the O-rings on my 1993 Cherokee but a T-60 wouldn't fit. I had to use a 9/16's hex. I did the same thing of removing the hex from the socket. Used a 9/16's wrench on the end and a short cheater bar. I also removed the carbon canister and windshield washer tank. Didn't have any problems removing the filter adapter from the top.

[@mattswanson2302]

Thankyou for posting a video that shows what it's really like. :)

[@Ozarkwild]

Thanks for watching! Glad it helped

[@dekcali2000]

It seems to be a common problem with older J’s and jeeps with the 4.0 L engine you would think that snap on or Mac would make a tool just for that.

[@dekcali2000]

Or maybe a oil filter delete, relocation oil filter

[@juancardenas9037]

Gonna do the same job on my 98 xj. I ordered the big L wrench on Amazon. Also will use cheater bar. Wanted to ask you how tight you went on the bolt. It's a thick bolt so i guess it's ok to use good force?

[@Ozarkwild]

It can handle a bit of force. I tightened mine with almost the same force as it took getting it broke loose. Make sure your torx bit is tight and fits snug.