OMG...I don't know how much I've been looking for a well-explained articles or videos on this. Thank you!
@LaserEverything3 жыл бұрын
Thank you for an EASY to understand explanation on frequency!
@PatriotCoinRings4 жыл бұрын
*"I LOVE THIS VIDEO"* I've had a 30w Fiber Laser Machine for nearly two (2) years now and haven't engraved one thing yet other than some of those black aluminum cards which seems to be the only thing I can do as a noob because I don't understand settings and the machine coming from China provides no support. This is some great info and I will be trying these settings tomorrow to see if I can find the problem to my delima of not being able to successfully use my machine properly and engrave like it should.
@veltri3905Ай бұрын
Did you manage to have that black finish in silver or gold? I have been dealing with that problem and I have a machine with the same watts, I need tips
@embtroop8 ай бұрын
Thanks for that! Simple and straightforward. Very helpful.
@ultralaserlab4 жыл бұрын
YOU did a great job brother. you solved all of my laser servicing problem. i am a fiber laser cutting engineer now recently enter into laser marking too.
@jefferyj4 жыл бұрын
Glad I could help
@bqkgamingpc71072 жыл бұрын
Hello brother
@bqkgamingpc71072 жыл бұрын
@@jefferyj I need help about marking on plastic materials
@mohamadsaifimran3196 Жыл бұрын
Your actual marked on minute 3.00 really help understand very much about the topic. Thanks! I want to credit your name in my documentation
@marekjuscak20872 жыл бұрын
Hello is there a chance you can share the file you used for this ?
@ukdnbmarsh4 жыл бұрын
yeah i run a 50 watt fibre laser and have never changed those spot settings since the machine is installed, instead setting up the desired finish using speed, power and freq and controlling the mark with spot size (typically 0.04) and various forms of hatching and cross hatching say if the material coating is particulary troublesome, so 50hz delivers the most power and then upping to 80 or 90hz for a nice polish (on steel) so just as an example , 0.04 spacing, cross hatch, 3000 speed, 100% power and 50hz for taking a coating off then 0.04, single hatch, 3000, 60 power, 100hz to polish
@twins3914 жыл бұрын
Hi Bob I have 50 w fiber laser. Can you please help me?
@mitzinewman32382 жыл бұрын
i have a 50w with 300mm lens. learing my setup slowly. thank you!
@wendywu98942 ай бұрын
really thanks for the video, I send it to my customer each time. 🥰
@DINAMIKECREATIVE Жыл бұрын
Hello JefferyJ, excellent explanation. Would it be possible to see the parameters published for certain "colors" such as RED, YELLOW, BLUE, on stainless steel?
@pistonslapuk5 жыл бұрын
Fantastic video mate! I was going to ask you about frequency and you’ve answered it thank you.
@jefferyj5 жыл бұрын
Glad to help!
@mysafename16943 ай бұрын
Thank you for doing a good job without any music in the background. Do you have anything that's more beginner-based just got my. fiber laser yesterday.
@icmpeko2 жыл бұрын
THANK YOU - this vid is still very helpful and relevant! I'm looking for more details on how speed + power + frequency impact the depth of engraving, specifically to optimize cutting metals (no hatch, just a 0.3/0.1 wobble config'd for the pen). I can see I need to dial this in for each lens (50W JPT; f100 and f290 lenses). Do you have something like this done --OR have info on how I calculate it? 🍺🦝👍
@naladful3 жыл бұрын
You don’t know how big of a help this was
@qingdow76405 ай бұрын
Can you please share those projects files that you used to set up the grid? Thanks for this.
@richardneal38412 ай бұрын
Like your information on MOPA fiber laser as I just got mine setup and don't know much about it and the book that came with it does not address colors? Rick
@3DCA3 жыл бұрын
Are there any books to help working with materials like silver, gold, plastic for example. If not it's time to write some books for ezcad3!
@reginaldscot1654 сағат бұрын
1:40 That was not logical to me. My brain knowing nothing about lasers said. All pulses are 10% more pulses over a smaller area = more power. That seems logical to me. Still trying grasp why more pulses = less powerful? Like if I have a gun and I shoot x1 bullet at something Vs shooting 1000 bullets at something? Logically if all the bullets are the same (like each pulse is 10%?) then surely 1000 bullets is way more destructive? Can anyone explain the mistake I’m making to me? 🤷🏻♂️
@jetjackhui3 жыл бұрын
Hi Jeffery! Was it a 20W fiber laser machine use in the test on 3:50? Because I had bought a 20W fiber laser machine as well and downloaded your shared file to do the same test just like 3:50. I was using stainless steel pieces as well but the result was different from yours. It did not show any colour. Please help.
@lexispapi Жыл бұрын
This definitely helps a ton! Do you have a file set up for lightburn that can be downloaded?
@antuand28063 жыл бұрын
Would it be possible to send your ezcad file with the different grade of frequency ? It would help me a lot ! Thanks !
@adamperetz23 жыл бұрын
Can i also get the file?
@distantgalaxymusic14472 жыл бұрын
Excellent video! Thank You for the break down. Would these settings also produce the same results on brass or nickel silver?
@IceAgeProductions3 жыл бұрын
so great, thank you so much. anywhere I can download those test settings to try on different metals on my 50w?
@GCLJALISCO Жыл бұрын
Hello, great video, excuse me, what power is your fiber optic machine?
@olivierw7405 Жыл бұрын
Hi ! Very nice videos. Do you know what happens if i set a frequency out of range of the laser source inside my machine ? For example i set 45 KHz and the source has a range between 50 and 80 KHz ? Thank you Olivier
@mrsmw1004 жыл бұрын
Really useful video, thanks very much.
@cemaloguzklc6162 жыл бұрын
Hi Jeffery, I couldn’t make deeper marks so could you make a video or will you answer me how can I get deeper marks on stanless steel without burning
@AustinGreen97 Жыл бұрын
This was so helpful and well thought out. Thanks.
@ethanw964 ай бұрын
Hi Jeffery, long time since you posted. When you do this graph, when you change parameters in layer parameter settings, do you have to do each layer independently? I have 70 layers and have gone through and changed pramaters in every single layer. Now I have to go back to change mark speed to 500 on every layer. Is there a quicker way of doing that?
@artdimaclid17443 ай бұрын
what adjustment to be done to make a thin ingrave result?
@juanmolina52053 жыл бұрын
I really appreciate the video and has helped me understand more about the settings and parameters. Is there a way that I might be able to produce a chart like this so that I can maybe download it and/ or see the different settings for my fiber laser. I want to be able to see the outcome on the material that I use so that I may be able to adjust the settings according to my fiber laser.
@mitzinewman32382 жыл бұрын
I have a 50w with a 300mm lens. will i need to make any adjustments to the settings once i download the power vs frequency test grid? learning my machine slowly
@calligraphybyden Жыл бұрын
Hi do you also have tutorials on ceramics? I cant seem to engrave on ceramics using the fiber laser
@tinahuman71358 ай бұрын
Where will I get the manual for Ezcad3 for a 80w Mopa
@xmdslipkfanx3 жыл бұрын
Super helpful!! Where can I find a file like this to download?
@chraso3 жыл бұрын
Thank you. Can you please also post this for brass?
@davidlaurin71863 жыл бұрын
WOW someone with common sense lol, thank you so much for making this easy.
@latasoni28612 жыл бұрын
What is best settings for gold metal cutting (30gauge)...? {30W machine}
@NenBraa2 жыл бұрын
Hi i have a little problem which is whin i print a circle it shape more like an Elliptical shape so what seems to be the problem here??
@nicholas272812 жыл бұрын
Hey Jeffery, I made a test grid that shows lots of different colors on mostly every material I've tested - how can I get in touch to show you and/or discuss it with you?
@raihanmohammed47762 жыл бұрын
Then is it possible to laser a camo pattern on a glock slide, with colour effects?
@katja_borovac843 жыл бұрын
Hello! Excellent videos , Thank You very much!! Please can you maybe make a video of Hatch(0.01-0.05) vs SPEED(100-500mm/s) on Gray/SIlver Anodized aluminium at 50% power 40khz+ frequency?? I noticed a very big influence of HATCH on darkness of the mark. Tighter hatch giving brighter mark. I do not have access to Gray Anodized aluminium anymore, I used test pieces I had.... It would be a great help for those trying to get a dark mark on Gray anodized aluminium...
@derekfx132 жыл бұрын
Hi Jeffery, What material are you using in this video? Thanks
@roberth18583 жыл бұрын
Do you happen to know what settings I would use to get a black Mark on chrome? I have a 30% watt fiber. Thanks
@mobo93914 жыл бұрын
Hello, on the Power vs speed and power vs freq the hatching is not setup. I cant seem to be able to figure out to hatch more then one item on the page. When editing the hatching parameters on right IE Speed, power and Freq then click APPLY and got on to the next and change it. After doing rows, I go back and click to check it and the last info I input in 1 box shows the same info I put in the last. If possible can you explain how to set up parameters and do hatching on the box to show different values. Thanks again for doing these they helped a lot.
@jefferyj4 жыл бұрын
I made a video a while ago on hatching; it might be worthwhile to check out to make sure you're doing the same things I am to set up pens and apply hatch settings. Here's a link: kzbin.info/www/bejne/oZ7bdZiGl617hc0
@tuananhtrantrong51405 жыл бұрын
Thanks Jeffery, your videos are very useful. Could you please let me know what's the different between Frequency setting and Wobble Distance setting? I'm confused because they both change the density of the wobble circles.
@tuananhtrantrong51405 жыл бұрын
i think that keeping the frequency constant, increasing the wobble distance must increases the speed, is that right?
@jefferyj5 жыл бұрын
Wobble is used to thicken a line. It will allow the laser to deviate from the 'on screen' path by an amount you set to gain thickness or coverage. Frequency controls the number of pulses in a period of time - the higher this number is set, the less destructive each pulse will be.
@sanjur76703 жыл бұрын
I have made many setting with the frequency and hatch but i am not getting the proper result - if i print a text called TEXT , the last letter T is not as the same as TEX - why is that , how can i fix that
@cesardavalos171110 ай бұрын
Any advice in engraving Silver? I have been trying everything I can and Silver is not engraved at all. I have tried the focus, lowering and making the laser lens go up, nothing works.
@shelby504114 жыл бұрын
Im looking for help with an electrox ebox raptor fiber laser thats not marking at all.. would adjusting frequency affect etching output ?
@sukiperu14 жыл бұрын
Love your tutorials Jeffery, where do you get your sheets of titanium and stainless from? Need to get some similar stock in to make some cool things? 👍😎
@jefferyj4 жыл бұрын
I just picked up the titanium from ebay. The stainless I had lying around, it came from an old machine.
@sukiperu14 жыл бұрын
Great thanks 👍
@Meobeo88Ай бұрын
Many thanks sir. I'm appreciate your help sir
@kylebatley2125 Жыл бұрын
Hello where did you get the Cards from please ? im de to get my fibre laser soon and would like to test setting this way
@davidsims34763 жыл бұрын
Hi, Newb here. Where do you get the image for running the test engravings that you did? I have my OMTECH 20W fiber laser being delivered today and could use all the help I can get. Thanks
@MuttsnBonesDogDesigns2 жыл бұрын
would this work on metal plated buckles?
@Art-fb9jy2 жыл бұрын
hi i have a problem with params i touched some of the ports and settings and the fiber laser just wont work and any other ports i see on youtube dont work how can i fix?
@SwissplWatches5 жыл бұрын
So brilliant and helpful! Thank you!
@mrjoelpt3 жыл бұрын
Hello I know this is an old video but is there a chance we can download the test files used?
@adamperetz23 жыл бұрын
Where can i download this file to try on my laser machine
@damps79383 жыл бұрын
Bro, you nailed it. Just another Thank you :)
@RawGrunt4 жыл бұрын
Nice video. Just a question if I may. If you dont get a satisfactory color on a mark. Is it practical or possible to re-mark without moving the material. Lets say we are working on stainless steel for example. Thank you
@jefferyj4 жыл бұрын
Yes you can mark again as long as you don't touch, bump, or move the material at all. For color, the results may be a little unpredictable when re-marking.
@rickreynolds16402 жыл бұрын
Hey Jeffry, I am trying to put a black mark on 11 ga. mirrored Bronze plaque. The size of the plaque is 11.5"x 7.625" almost the size of a sheet of paper. I am brand new at this. I just bought my 60 watt Fiber MOPA Laser. any help with settings or if a plaque this big can even get a black mark would be appreciated. I am using a 300x300mm lens by the way. Thank you FYI I tried to email you but it came back as undeliverable
@takismail3 жыл бұрын
Dude, was looking for that, thanks for sharing :)
@leelemoine3574 жыл бұрын
Awesome info - i've recreated a few of these templates; is there any repository online where things like this are shared?
@jefferyj3 жыл бұрын
There are a few facebook groups and you can also check out fiberlasersettings.org . Try this facebook group: facebook.com/groups/547620632495173
@cnccarving4 жыл бұрын
very useful video thank you for your time
@anthrafff86844 жыл бұрын
Thanks so much for these great videos. Could you send me the power/speed chart please?
@jefferyj4 жыл бұрын
Go to this video: kzbin.info/www/bejne/nXLLf3ara817g6c The files are available for download in the links in the description there.
@anthrafff86844 жыл бұрын
Thanks a mil, I’ll try and download now.
@RandolphBauder4 жыл бұрын
@jeffreyJ Thanks a bunch for these! This seriously helps me figure out some questions I had about my laser engraver! I'm only a few weeks into the engraving but this shot me forward several months!
@finsterbarry2 жыл бұрын
Can you provide the EZCAD file with the test pattern? I'd like to try it on my machine
@eliasmoawad14 жыл бұрын
Thank you so much! Your videos have been very helpful.
@KowalskiDoes Жыл бұрын
Are you able to share the test file you used?
@6earth64 жыл бұрын
Thanks man. This help A LOT.
@tommyzhong3438 Жыл бұрын
Hi, Jeffery, thank you for your very nice explaination and details for all that. I am new to fiber laser, could you please tell me how to setup the POWER/FREQ/HATCH testing file in the EzCad2(or simply you can upload the testing .ezd file) for us to get the testing done like what you did in the video?! Much appreciation for your help!
@ALibadran904 жыл бұрын
Have you tried trying this on gold ? Would be interesting to see if you can create any colours or mirror polish ?
@xivsierra25793 жыл бұрын
you are amazing and have the most helpful videos. Is there any way i can email you with a couple questions?
@bqkgamingpc71072 жыл бұрын
I have laser machine 30W , I need settings for marking on plastic materials ,I want to mark on plastic very clean and bold
@uneekvr73222 жыл бұрын
Do you have a link to the grid files so I can test out my laser with them?
@yfaheem5 жыл бұрын
Hi Jeff, thanks for the video. I would like to ask how I can create a thick line (~1mm) on steel at a scan speed of 6-7 m/sec?
@jefferyj5 жыл бұрын
Two ways: use the offset feature in ezcad and hatch the space between your oriignal line and your offset line - or - use the wobble feature. I made a short video on this a while ago.
@ajawentum15634 жыл бұрын
Please send me a link of the video of how to increase the line thickness in laser output.
@iainwade5 жыл бұрын
I hadn’t payed attention to that spot diameter visualisation dialog.. good pointer. Another big thank you from me: it’s really great that you are publishing videos of your experimentation since there isn’t much else out there. Is there a shortcut you use when making those test patterns or do you go through the boxes one by one and adjust pen settings?
@jefferyj5 жыл бұрын
I've been trying to find a shortcut by opening every file in the ezcad folder that looked like it might store pen settings, but I haven't found it yet. So yes, one by one....very tedious. If you want the file to play with, let me know and I'll send it your way.
@iainwade5 жыл бұрын
Param/markparam.lib has the saved param library- each [section] is a single pen config, but unfortunately while that would allow programmatic generation or just search and replace, you would still need to manually apply a different setting to each pen which is still 75% as tedious.
@minorunebunu4228 Жыл бұрын
hey i have a fibre laser 100w and y try all programs and instaling desintaling all tinghts and is not worck can you help me pls ?
@kungugithachuri85214 жыл бұрын
Hello Jeffery. I’m trying to mark a curved surface, but can’t get clear marking all the way round. Do you have a solution for this?
@jefferyj4 жыл бұрын
Switch to a longer focal length lens like a 300x300, this may help.
@tsunamistrike12253 жыл бұрын
Keep up the good work!!! One question, does it depends on the metal to laser out colour?
@hamedtabatabaee99764 жыл бұрын
very very very very very helpful
@Narz19814 жыл бұрын
Thank you for the tutorial I will try it out. Can you tell me how to set the parameters for cutting through metal?
@jefferyj4 жыл бұрын
Sure, low frequency, high power, moderate speed, several passes. Add some wobble if you are lower wattage or your material is thick.
@Narz19814 жыл бұрын
@@jefferyj Hi Jeffery thank you for replying. I have the same machine in 100W, I'm still trying to figure out the parameters I should use to cut. Because this is a test I'm cutting through 0.8mm Brass before I move on to 14K Gold. I have tried: Speed: 800 & right now 2600 Power: 100 Frequency: 20 & now 150 Hatch is a very close hatch I'm not sure why it is taking so long to cut though. When you say several passes, how many passes or minutes - I have had it going for 9 minutes on continuous & it is still going. I assumed that the 100W would be much faster than what I am seeing. But, I am new to this & trying to figure it out. Can you please advice or suggest parameters? Or if you know i'm doing something wrong here. Thank you
@jefferyj4 жыл бұрын
Send me a note.
@Narz19814 жыл бұрын
@@jefferyj I just sent you from narooma@gmail.com
@Angryhelder5 жыл бұрын
When I tried doing stainless steel at first on my 30W fiber non MOPA it was like a brownish goldish color and I didn't like it but now I go out of focus by 3-5mm and it no longer etches the steel but burns a very dark image on the steel. You should try to go out of focus to get that black anneal and also see what colors you can get out of focus. Great videos especially since there is so little out there in tutorials for these lasers in English.
@jefferyj5 жыл бұрын
Check out some of my other videos from the past. I've done a few on colors on stainless and titanium.
@rumblemumbles2 жыл бұрын
i too have 50W raycus fiber non MOPA, does frequency affecting the result too? because the company said no need to change the frequency because its not MOPA. i really need black smooth marking but never achive it, always looks goldish color. Please help me..
@Angryhelder2 жыл бұрын
@@rumblemumbles Do what I told you above, you need to find the sweet spot where it starts to etch the metal then raise the head about 3mm to get the dark image. Also you want the lowest Frequency your laser goes to make dark images. I have a 30W so my laser can do 30 KHz to 70KHz. The higher the frequency the lighter in color for non MOPA.
@rumblemumbles2 жыл бұрын
@@Angryhelder yeah i already try for 1 week with every parameter and power setting with my 50w and 50KHz and raise the focus, but the result is always not truly jetblack, it turns out greyish black. but thanks for the info. sorry for my bad english.
@shawnalphonse20062 жыл бұрын
very useful stuff, currently working with the lw200 by red technology and would love a m moment of your time for some questions if you dont mind
@randfee4 ай бұрын
What is the pulse duration here?
@tareqhadrab33873 жыл бұрын
Iam working with pigeon rings i have gold color its aluminum coated with gold color all what I can create just white color text . i need black text on aluminum rings , do you have any solution i hope you can help me Note : i hat 20 watt fiber mark machine with rotary Many thanks
@Akari1692 жыл бұрын
hi complete newb here so I hope this isn't a stupid question but can anyone tell me If you can change the max Khz in the configurations, I keep trying to make tests with parameters that use 40 or 50 kHz but ezcad keeps telling me the max is 20, so is that it I can't use frequencies above 20?
@chanseyhahieng84434 жыл бұрын
Hello! Jeffrey . I have a problem with my laser machine I hope that you can help me figure out. it shown up side down from the real object that I hatched it reversed from the laser. it likes a selfie from Iphone.
@jefferyj4 жыл бұрын
If it's upside down and reversed, go to parameters>field tab, then swap the galvo 1 to galvo 2.
@geraldinecruz29202 жыл бұрын
Hay algún vídeo como este pero en español?? 🙁😢
@tdimop4 жыл бұрын
Thanks for the video. I’m a noob to the fiber laser world and just purchase 50w jpt power source. Is there a place I could download these test patterns or is it something in excad2 I can find?
@jefferyj3 жыл бұрын
Links to these files are available in the descriptions to some of my other videos. You can also check out this facebook group: facebook.com/groups/547620632495173
@CNCPRINTBLOGSPOT Жыл бұрын
Does someone has made the file for Minilase XL *.pse File? 🙂
@3DCA3 жыл бұрын
Thank you very much for your efforts
@gliamobility Жыл бұрын
Well done. We have many greens, reds and oranges at 25% power in the .0005 and .001 line space range. At 20% power, we did a second pass at 0.001 line spacing and got a nice black luster at 80kHz, and a deep maroon at 60kHz. If you want to get some rainbows, we did a double pass at 20% power, 800MM/s to get brilliant colors at .0005,.001 and .002 across all frequencies.
@gappygg87753 жыл бұрын
Sir.. Thank you so so much. This help me a lot !!
@jasonsailor99875 жыл бұрын
Hi Jeffery, Thanks for the video, it is very helpful. I am looking to do darkish marking stainless steel with a 30 watt fibre laser (it is MOPA) however I need it to be a durable mark. It is for a kitchenware product that will be used almost daily and be cleaned in a dishwasher. I don't mind if it fades a little over time but it must be durable enough to be distinguishable and not flake like MOPA laser annealing can over time. Do you have any ideas or know of a good resource for this? Cheers, Jason
@jefferyj5 жыл бұрын
Hi Jason - I don't have enough experience with long term durability of annealed black marks on stainless to give you a good answer. I'm curious though, how many washes does the mark stand up to until it is damaged? I may experiment with this...
@eugenekok62294 жыл бұрын
Is this the same explanation for CW laser? I seen a CW laser where I am able to change the frequency (1Hz to 80kHz)
@jefferyj4 жыл бұрын
Never owned a cw laser so I don't know much about them.
@eugenekok62294 жыл бұрын
@@jefferyj no worries, thanks for your reply!
@allahsservant33903 жыл бұрын
hello mr jeffery is have an issue about engraving when i want to mark as it is straight on my pc then when the laser marks it opposite like if i want to engrave MONDAY it engraves YADNOM. i want to reset it to normal please sir kindly assist thank you
@jefferyj3 жыл бұрын
Parameters (F3) >> Field Tab >> Galvo 1 = x Swap that setting to the other galvo and it should be functional.
@joaopaulomsd15 жыл бұрын
Thank YOU!
@TradingArmyBD11 ай бұрын
How could I get your file, could you help me please collect the file.
@alejandrocontreras12065 жыл бұрын
Hey Jeff, thanks for the video but do you have any specific parameters for marking plastic? I tried the ones in this video and it didn’t come out as a clear mark it was more of a burnt mark.. can you help me out? Thanks
@jefferyj5 жыл бұрын
Check out these two videos if you haven't already: kzbin.info/www/bejne/r4LJnZqcat6fgMk and kzbin.info/www/bejne/m6ragpmFdpyen8U Some of those settings may be useful to you. If your laser is more powerful, tweak the power and speed settings.
@impressivesigns71303 жыл бұрын
Great video but I got quastion: so I got 2x fibers one 50w and other is 20w but 20w got 1-1000 freq. Where do I use this and for what? The 20w almost more powerful that 50w China model and 20 w is TurcMark sos laser.