Essential Maschine Sampler Masterclass. Bookmark this one!

[@johnsuggs7828]

How is it that you don't have over a million subscribers? I've been watching your content now religiously for about a year and a half now. It's ALWAYS so good. I personally like your clean environment. Remember you saying some people saying something about it. The setup it good, everything is so well explained. Man you could teach a child this stuff the way you do it. When I see some channels with millions of subscribers and they're literally the biggest goofballs. Even the music channels. Some of them are so god awful bad but the have 100s or thousands of subscribers. What is wrong with Subscribers?

[@jefgibbons]

Ha! Thanks so much John!!

[@piotrrusk]

I have the same impression: so much high-quality content, and so little subscribers? I don't understand people. Keep up 🙂 Thanks for valuable videos.

[@jefgibbons]

@@piotrrusk Thanks Piotrus! It's getting very discouraging on here, the comments are so supportive but the algorithm is crushing me these days...

[@MarkoProximo]

Well, the way online social works, I see two ways for ​@@jefgibbons to hit a million: 1. A public feud with a high profile fellow KZbinr 2. Make future videos shirtless. There are other options, like spicy taco binge fest, but they take more time.

[@jefgibbons]

@@MarkoProximo HA! This made me laugh out loud. Been watching the public feud, I die a little more each time. But whatever it takes eh?? Ironically I came out shirtless last week during setup, waiting for it to dry... it almost happened! Whatever it takes... cus man it's been slow around here lately. Working on some alternate plans to yours!

[@obiedecker4038]

Unbelievable - just searched for "Maschine Sampling Masterclass" because I have some time to practice, and I find one from THE MASTER OF MASTERCLASSES that was uploaded 3 minutes ago! What a nice coincidence. Thanks so much, Jef. NI should pay you big time, you are selling their products much better than them. :)

[@jefgibbons]

That’s great! Thanks so much

[@h-dawg969]

I wish you were located near me as I'd love to book a few 1 to 1's with you. You literally know Maschine Daw & Hardware inside out! I usually start a beat in Maschine, then drag the individual pads (as one shots,) and the Midi notes of chord sets etc into Logic and carry on from there. It's a sufficient workflow for me sort of, but I know I'm not getting half as much out of Maschine as I could do if I knew it better. Love your channel mate. Thanks for this. Got this one and so many other vids of yours saved in their own playlist and I come back to stuff again and again repeatedly over time.

[@foreverthestudent]

You can never learn enough with this device! When I bought mines, I spent two weeks watching all the information so when it arrived, I hit the ground running! This and my Kali audio monitors were my best purchases last year!!

[@guyloughridge4628]

Thanks Jef, this was a fun video. I'll be headed over to your other video soon to get a better understanding on synthesizers. The way that you presented this video sparked my imagination to explore Maschine a bit deeper.

[@fadigirgis6423]

Your videos were the main reason to push me to buy maschine mk3 & i am really happy wz it , u are doing awesome tutorials , waiting for more inspiring videos

[@jefgibbons]

Thanks! More coming!

[@Aaa-pz6nh]

Man this timing of this video is crazy. I’ve been researching if I’m going to stay with akai or try the maschine. Your videos have helped decide to try the maschine mk3. I really appreciate this! Great work

[@jefgibbons]

Thanks, glad it helped out!

[@pwho405]

This is why I always watch for me and recommend your videos to newbie’s great content for all users.

[@jefgibbons]

I appreciate that, thanks for the help!

[@renmomtha-renaissancesoul8849]

Thanks for this masterclass masterpiece Jef!❤️‍🔥

[@jefgibbons]

You are welcome!! Thanks for commenting!

[@MrMatisyahu]

Thanks a tonne for this Jeff. Legendary videos for a looked over platform such as Maschine. Looking forward to even more in depth videos from you as they help more people then you imagine. Much love from Kenya!

[@jefgibbons]

Thanks for the support T A I O!!

[@MichaelSmith-mb1gm]

This is a vid that you can just come back to over and over again. Such good work sir🙏

[@jefgibbons]

Really appreciate it Michael!

[@Realliedoe]

1st! Good Day to all...Conquer the Day Guys. Thanks again Jef for another great tutorial!!!

[@jefgibbons]

You bet, thanks again for the support DCT!

[@dacoolestdadever]

Wow I can’t believe I just barely found out about your channel what great content and such a beautiful environment just liked and subbed! Now I’m gonna go through all your videos lol thank you kind sir and keep up the great work!

[@jefgibbons]

Thanks!! Welcome to the channel!

[@EyeconWorld]

Ok I havent seen it yet but I know itll be huge!. You have no idea how much I needed this masterclass. Thanks Jef. 👍👌💯🔥

[@jefgibbons]

Glad to hear it, thanks Eyecon!

[@patch002]

Thanks Jeff!

[@jefgibbons]

Most welcome Alex!

[@drh713]

@11:40: IMO, it would be better to go change the root key over on the zones page. If you use that method, the math of the pitch controls in the sampler is easier Video suggestion for you: Using single cycle waveforms in maschine. There's a big collection you can find by searching for "adventure kid". The shaping controls in maschine work well with the concept; and you get a ton of sound options without requiring a lot of space on maschine+.

[@jefgibbons]

Good tips, thanks drh!

[@hisroyalillness]

Very good tutorial - thank you Jef!

[@jefgibbons]

Most welcome! Love your name!

[@Knight2Bee]

Great Masterclass Sir. This helps a lot.

[@AndreiBlanda]

Thank you, Jeff!

[@jefgibbons]

Most welcome Andrei!

[@Neumah]

Jef's visual manual! Very good.

[@jefgibbons]

;) thanks Neumah!

[@villagenumerique9085]

always the best thanks

[@jrnerdmann2098]

Sampling is so easy on Maschine. Good idea to reach it.

[@jefgibbons]

Thanks Jørn!

[@RookieRay]

Could you do a tutorial on sampling from a vinyl player and incorporating to a Maschine project. Recently acquired a Numark PT01 and a Maschine plus.

[@fuerchtenichts]

Thx

[@SoundmanCH]

Thanks

[@jefgibbons]

Hey Frank, just saw this, thanks so much!!!

[@NerdicusGoblinski]

Another must watch from Prof G!

[@jefgibbons]

Thanks again Peter!

[@NerdicusGoblinski]

@@jefgibbons always going to show support for your content!

[@keimforeignking]

I would love to own a maschine mk3 or the plus

[@riodaghost]

Great vid Jeff 🙏🏽

[@RSKNPOL]

Great ! Thank You very much Jef! 👍✌🔥

[@jefgibbons]

Most welcome!

[@beatkitchen]

Brilliant... thanks so much Jef 🙏

[@KaMLohgaRh]

Looks like also promoting other ppl patches and stuff..would be good to keep it limited to the mashines stock stuff..anyway...you are a master of your gear though ❤

[@jefgibbons]

Promoting my amazing FRIEND'S stuff, that I paid for myself!! Just so you know ;)

[@KaMLohgaRh]

@@jefgibbons very informative videos sir...❤

[@hidhoman954]

EXCELLENT video thanks

[@jefgibbons]

Most welcome!!

[@MiriAstro]

You are a phenomenal tutor. Subbed

[@jefgibbons]

Thanks so much Miri!

[@99MUZIK]

I would like for Native to add a granular sampler in the near future!! And also drag and drop some of the Komplete samples library presets into the Maschine plus in stand-alone mode. Can you please tell Native Instruments.

[@jefgibbons]

Love both of those ideas, I’ll drop some hints!

[@coresk1420]

awesome video

[@jefgibbons]

Thanks Core!

[@substance90]

Super high quality no bullshit content as always ✌️

[@DonHajicek]

Bookmark this one? Dude, if I bookmarked all of your valuable videos, all of your videos would be bookmarked.

[@sekritskworl-sekrit_studios]

Where's your video on slicing? I don't see it.

[@scattermish]

Ooo, ever gonna do one like this on the Push, Jeff?

[@jefgibbons]

Great idea! I LOVE some of the integration on the Push 2 controller, like the way ADSR envelopes and compressors change in real time!

[@czemail]

Great Video Jeff! I have a question I just can’t seem to get an answer to: I have the MK3 and a Komplete A25 controller. My main DAW is Studio one. My question is how do I use my A25 controller on a patch in the MK3? Although I love the pads on the MK3 & love the keyboard & chord modes, sometimes I would like to quickly create my own CHORD voicings on the A25 controller. Any help with this would be so appreciated. Thx in advance Jeff!

[@dxtrs_mnpltr]

Hi Jeff, have you made any videos about Maschine clips by any chance?

[@kostoglotow]

Jef, I've really been enjoying your channel and respect what you do - which is why I'd love to hear your take, to help me out with a little conundrum over here... which is deciding between getting a Maschine Mk3 or Live 11 Suite + Push 2 (I can get a great deal of the latter combo for same $ as a new Mk3). I have zero hardware, only my macbook. Making beats/music for a couple months now. Mainly I've been using Serato Studio, then Logic, but I'm a bit familiar with Maschine software too from collabing with a friend. Currently trialling Live 11. I really prefer the "session view" workflow that Ableton/Maschine have VS strictly linear arrangement type DAWs. I have no music theory background, but want to get more hands on with creating. Obv stuff like chords mode (Mk3, great video you did on that!) or learning chord shapes on Push 2 would be super helpful with that. I don't mind the computer per se though. I love making hip hop rn, but I can see myself wanting to make neo soul stuff, but also ambient or dub techno or whatever in the future. I'm leaning towards Live + Push because the deal seems too good to pass up. Can always sell off the Push if I don't gel with it. Only a bit worried Live might be more than I really can take advantage of and maybe Maschine would be more streamlined experience....

[@jefgibbons]

Man, great questions. I have a massive hangup with Live Session view where you can’t really edit without starting from the beginning of an entire scene… it’s hard to explain but it’s a complete showstopper for me! I also hate the quantizing features of Live. Other than that, it’s a beautiful environment for live performance (not just a clever name!) and it has better sample time stretch and pitch shift systems than Maschine. I prefer Maschines version of session view much more than Live’s. The main thing I’d say is get what you have around you… if you have people in your circle you can learn from using one or the other I’d go with that… you can collaborate and talk shop with that person and it is just way more fun!

[@kostoglotow]

@@jefgibbons Wow, I really appreciate you taking the time to give such thoughtful advice. I am prone to focus on "things", neglecting the social aspect, which is so important for us human beings. I have Maschine users around me, so... Thanks again & I guess from now on I'll enjoy your Maschine videos even more :)

[@Pavel-on-youtube]

🔥

[@pinkbuddha_samplepackreviews]

great content. thank you very much👌

[@tajih9683]

Just wondering what computer are u using? Love your vids!!

[@professionalhater2809]

How do you gain stage an audio sample in the audio module? I know how to gain stage a regular sample in the zone area. Can you help?

[@GoGeoGo]

When a KZbinr teaches you how ADSR works better than a multi thousand dollar school did. LOL

[@jefgibbons]

Ha! Thanks so much GoGeoGo!

[@shahirmaged3428]

great content. thank you very much

[@jefgibbons]

Most welcome Shahir!

[@tylerjones6116]

Great video Jeff big fan. Ever have problems with Maschine crashing or freezing at the start up. I’ve read the support article and done all the steps still nothing. Waiting for response from native instruments

[@luigicodeluppi8888]

Hello. thanks for the video. when I use M + in standalone it happens to me that at a certain point playing the pads a noise is heard in the audio, an annoying distortion of the sound especially in the attack as soon as I hit the pad. This with any sound and with cpu at 45/48% no more. I have done all the updates but the problem remains. Can you give me some help? Thank you

[@bamvoxstudios]

Do you play Trombone? I see one in the back that I have never noticed. 😃

[@ernestm8884]

No disount code for Julian

[@jefgibbons]

I think he deserves the asking price! Plus he's got the free set over there as well...

[@mvmb1e]

Finally! thanks a lot

[@jefgibbons]

Most welcome!

[@JoeyBelville]

Great video, per usual! BUT What is that BEAUTIFUL keyboard controller you’re using with the white and translucent keys?? Please tell!!

[@jefgibbons]

Thanks Joey! That’s the special edition Komplete Kontrol, but I think they’re sold out unfortunately!

[@fabgroove]

👍👏 👏 👏 👏 Super !!!

[@juliogargano8968]

News help !. I’ve beben using the sampler and after that I load a kit in a group and have no sound at all. If I record the notes draw on the grid, but no sound. Where did I mess up?. Thank you!!

[@jefgibbons]

Hmmm could be a bunch of things! You should head to the forum where you can post a pic or two and get some help, probably something that is being overlooked!

[@juliogargano8968]

I guess its around the asio4all driver. I will download from the NI page. Thank you anyway!. Great tutorials you are doing!. Keep on!

[@DonHajicek]

Also... I make a lot of beats and love the expansions, but really struggle with creating things on my Komplete Kontrol keyboard. I watch you do everything on Maschine and then I struggle to translate onto my KK system, using Kontakt, Komplete Kontrol, Maschine plugin, Massive X, Monark, etc... and am struggling. I have found your keyboard/maschine videos, but nothing seems to just nail it all down extensively. What do you think? Am I off base with that observation? Also, I do know that you are more geared toward Maschine hardware users, of course, but was just wondering... I do not to drop more $ on hardware right now.

[@jefgibbons]

Hi Don, I don't quite understand your question/ observation... I use the Maschine a lot in my videos for playing stuff, but tend to do more on the keyboard on my own. I like showing how much you can actually do with just the hardware, and little keyboard skills (most of my followers).

[@DonHajicek]

@@jefgibbons sorry to be unclear. You obviously do a brilliant job showing how the Maschine hardware works to make these beats using expansions, etc. I’m not a keyboard player, by any stretch; but the hardware I DO have is the Komplete Kontrol Keyboard. When I watch you demoing expansions and the features of the Maschine hardware, I wonder how that would translate to the KK hardware. Basically, “how would I do everything he’s doing on Maschine hardware using my keyboard?” Sorry if I’m just being dense about this. How do I take advantage of NI expansions just using my Komplete Kontrol keyboard, and do everything Jef is doing on his Maschine+ right now? Is that even possible? I mean, I have keys instead of pads, but, other than that..? Make more sense? I just can’t seem to sort this out.

[@Bezowinz]

I'm considering an MKIII purchase and had a question related to this. When I saw the title, I was hoping you worked with drums. Any way, a question I couldn't answer looking at the manual. I see velocity can modulate start, delay, cutoff & of course, volume. But can velocity modulate pitch?

[@jefgibbons]

Not that I can think of… but if it’s drum related, don’t forget you can click on a snare then hit keyboard mode, then play the sample and move up or down the pitches… great for pitching a snare roll and much more precise than velocity would be!

[@Bezowinz]

@@jefgibbons that would only allow for semi-tone variations I believe. I'm looking for something much more subtle; a bit more brightness for louder hits, less for softer hits. Or can that be done in keyboard mode? Or maybe another way?

[@jefgibbons]

@@Bezowinz Only thing I can think of would be to assign the pitch bend to something very small (like 0.1) and then use the slider to control the subtle pitch changes...

[@omnione7894]

Thanks

[@jefgibbons]

Most welcome!