Jet Powered Go-Kart (3 Jet Engines)

I built a Go-Kart with 3 Jet Engines. Filmed with the Insta 360 X3.
Insta360 X3 bit.ly/WarpedX... .
-- Affiliate gift is 3m invisible selfie stick - $100USD value.
- The gift will go to the first 15 followers"
First 15 People will receive a complimentary 3-meter selfie stick simply by purchasing through your affiliate link-no special action required!
LINK bit.ly/WarpedX...
A lot of people ask me about this particular X3 camera and they're running a promotion right now so I figured I would try to help everybody out with some sort of discount code.
Let me know what you think in the comments below and have a merry Xmas... Stay happy and stay Sane.
📷 Shot on @insta360X3
DISCOUNT LINK for Cameras:
bit.ly/WarpedX...
#gokart #karting #extreme #drift #insta360 #insta360x3 #insta360wheels #reallifegta
This Jet go-kart was so insanely fast but I didn't show all the numbers compared to a shifter cart because in this video I just built it and tested it, in the next video I will be racing it, Let me know what you think in the comments below but I can't wait to get this thing on the track next.
► Twitter: / warpperception
► Facebook: / warpperception
► Instagram: / warped.perception
► IMDB: www.imdb.com/ti...
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka

[@WarpedYT]

*Get Your FREE 10Ft invisible selfie stick - $ 100 USD for the first 15 people who make a purchase using my link.* LINK bit.ly/WarpedX310off

[@josephpacchetti5997]

Hello Todd, Between you and this gentleman you are in my top five my favorite channels. 👍🇺🇸

[@josephpacchetti5997]

I've been watching this channel for 4 or5 years, keep up work and, try not to have too much fun, 🤣 👍 🇺🇸

[@WarpedYT]

@@josephpacchetti5997 thank you, honestly I feel like I haven't done anything in the last 3 years since the pandemic started, A lot of the mills and places for raw materials didn't even open up until the beginning of 2023, kind of crazy. I'm hoping to make this the year that I bring The content that I originally wrote for this channel to life. Thank you I appreciate you watching.

[@zlm001]

I wonder if some kind of intake to compensate for the seat blocking airflow would increase the thrust. I don't know how much that will help, especially with the added drag, but airflow is important for jets. That's why they're so cool. They might not jump off the line, but one you get going the acceleration just keeps coming.

[@preludethomas1061]

Hello sir, Tesla hybrid videos might just save the world.

[@ProjectFarm]

In a longer run, it sure seems like the jet engine would reach a much higher top speed than the original drivetrain! Looking forward to more of your projects!!

[@WarpedYT]

I need to send it to you so you could drive it next !!!

[@dylanspriddle]

@@WarpedYT Do it!

[@MAGGOT_VOMIT]

Todd, you should pilot it while wearing the Billy Ray Mullet wig and let WP make a banzai-run on the farm in the Farmabago!! OH THE HUMANITY!! 😆👍

[@WarpedYT]

​@@MAGGOT_VOMIT A banzai-run definitely!!!!

[@NickKautz]

I think if you geared the 125cc for top speed it would reach about 110mph. My guess is the jet engines might exceed that but not by alot. The problem is that the kart chassis is designed around rotational power from the rear wheels, so the handling will be wonky with thrust acceleration. Also uncontained air propulsion is an inefficient means of accelleration so it will go through alot more fuel for a given unit of work.

[@RealBobStovall]

I'd like to see the results of a straight, long run where those jets can max out.

[@makinbac0n]

To find the max on that set up it would need wings.

[@ArthurPeters-h8g]

You do that...I will watch, from a safe distance. 😮

[@Rythyms]

Might as well install wings and aerolons for yaw/pitch/roll and just.....take off!

[@toonpup]

Agreed. I'd love to see that thing really wind out on a long straightaway. One other thing.......I'm a pilot, and have always loved the sound of a jet prop (turboprop) starting up. I wish he had let us hear the sound of those jet engines start up from zero rpm's to full idle. In the video, all we experience is the engines before starting, and then they are already running. Heck of a cart though.......how can you not love something like this? Cool video!!

[@FriendxA]

indeed, or he needs to put larger wheels on the cart...the wheels are holding him back, not the lack of space.@@makinbac0n

[@Weisz]

This is so sick! Bring it to the salt flats this summer and let’s give it some real top-speed testing!

[@JohnH20111]

he might want to put a couple of spoilers on it to keep it on the ground

[@andreyka64]

Missing a part ? CNC mills a custom one , 3D prints it , etc. This man is unstoppable

[@callme_henry]

First

[@mattt198654321]

We HAVE to see a top-speed run in a safe location!!!

[@iansaxby9264]

I wanna see him race against Robert Maddox and Colin Furze 😀

[@Amiinfocusyt]

We have used it since you left and it’s still so wild. Hyped to be watching this new project

[@WarpedYT]

That makes me happy to hear ❤. I hope @Danny causes havoc with that thing, hard to show people through video how insanely loud these are .

[@Lemonツ-11]

​@@WarpedYTyo, I kinda need some help, I'm looking to make a model jet engine but I need help on the combustion chamber because I know there's certen holes and stuff that I can't find anywhere, its not going to be a big model jet engine I've made the compresser and it's 2.5in In diameter, so that kinda gives you a idea and I also have no clue what barring to use what metal how close everything has to be etc so if you have time please write me a comment back thx❤

[@WarpedYT]

@@Lemonツ-11 have you send me the diameter and length that you need I can draw you up a flat template real quick

[@Lemonツ-11]

@@WarpedYT of the compresser right, and sorry if it sounds like I don't know what I'm doing I'm still learning and I've always been fascinated by jet engines so sorry again ❤️

[@WarpedYT]

@@Lemonツ-11 sorry autocorrect messed that up, no send me the diameter and length of the combustion chamber that you need, I will draw it up for you with a design that I think will work out of my head, then I can send you over a template so you can cut out. It's crazy cuz I do have a video on how to build a jet engine that I've been wanting to do for a while and I never filmed it.

[@RobertWelchman]

awesome build! you should consider decoupling the rear axle so the wheels are independent, you should get a lot more grip in the rear because they won't be scrubbing against eachother.

[@WarpedYT]

100% ... I almost did that for this video, But I wanted to see how it would act with a fixed axle the way it was first, But you got it right on the money.

[@pakistaniraveasylum1396]

also be able control the direction of the thruster with the steering

[@purdyboi8078]

@@pakistaniraveasylum1396Now THAT is a great idea!!

[@Primus54]

@@pakistaniraveasylum1396Cool idea… add thrust vectoring!

[@kadmow]

@@WarpedYT - doesn't thee front end alignment (caster / camber) take care of that?? (ie. lifting inside wheel - to eliminate scrubbing. (Of course, don't hold back ,on the engineering front.)

[@chefgiovanni]

Awesome build. Glad you did not catch on fire. However, the fire breathing, melting rocket sucking fuel effect would get you more views. Maybe get a fire suit and SEND IT.

[@thomastheo1566]

I don’t know if everyone watching this, can understand the effort that goes into making this kind of videos with so many custom parts made particularly for the video. Congrats @warpedperception and keep up the great work!

[@admdubya2107]

It doesn’t really matter how many times I hear jet engines firing up on something without wings it just makes me smile every time. I wanna ride next!

[@andreramos3146]

You need a 4th jet, and set them up in pairs aligned with rear wheels...only then you can call yourself a true madman 😂❤

[@danw1955]

ACME Jet Kart - Approved by Wile E. Coyote!🤣 That thing looks like a real blast to ride!😄👍👍

[@jordandoesmx9862]

You should try a hybrid between jet engine and electric motor. The torque that the jet engines lack at low speeds wouldnt be an issue anymore. Awesome build man

[@alexmigneault]

coul install one of these QS motor 6 speed electric motor chain driven it would be a crazyyyy build

[@ShadowzGSD]

that thing is nuts, i can't help but think it will be even more insane if it was pepped up with electric motors as well to work in tandem with the jet engines.

[@theadmiral5425]

Can you imagine how fast the cart would be if it connected to a powertrain going directly to the wheels.....Awesome you're back doing videos again. Thanks and Happy New Year

[@WarpedYT]

Yeah I almost did that In the very first Jet Go Kart, the problem is that it's two different types of power delivery and it's very hard to predict when you're driving, additionally I forsaw mechanical issues like overspeeding of the engine etc..... I thought it was going to be miserable to drive.

[@theadmiral5425]

@@WarpedYT Videos are great but safety first

[@Av-vd3wk]

@@WarpedYT 3:05 - Wouldn’t be a bad idea to, at the very least, wear a helmet…genius.

[@joshm8661]

​@Av-vd3wk it is his life to decide what he does and doesn't do. It would be smart to wear one white driving in your car but I doubt you do that. People are different in the risks they're willing to take.

[@WarpedYT]

@@Av-vd3wk yeah true but I personally didn't feel that the shifter car was very dangerous, I used to raise them for a long time and maybe if this was a bigger track with long straightaways followed by tight turns, then I would probably wear it but as you see with the jet kart which was extremely dangerous I wore it.

[@friskydingo5370]

Looks like a blast 😊👍

[@Racecarlock]

Jet Karts should be a drag racing class.

[@MJPilote]

Man I was surprised how fast it went after releasing the brake at the start. And by pushing air, no mechanical drive! Just awesome project!

[@SilvaDreams]

Have you ever seen a fighter jet? These hobby engines are just scaled down versions. Also use to do go-kart racing when younger and we could get up to 120mph. That was in the 90's.

[@MJPilote]

@@SilvaDreams yeah, many. But they are mostly engine with wings, this engine is tiny compared to the frame. Have also done some racing with F1 sidecar way back.

[@thefelrider]

Getting F-Zero vibes with this!

[@nickrider5220]

A two stroke cart is amazing fun, the jet engines will probably give a higher maximum speed, but most of the time the 2T geared cart will be quicker.......I think !

[@illinoiscarmeets]

HES BACK AND DIDNT DISAPPOINT 🎉

[@joshuagibson2520]

There is something to be said for tire spinn and being able to get sideways. Those jets are awesome though. I'd love to see them in a top speed type scenario.

[@WarpedYT]

Yeah man the engine that was on there had some work done to it, The thing even starts breaking the tires loose in 3rd gear.

[@Frank88Workz]

Not gonna lie, as a 2-stroke addict, I could smell it from here hehe. What was that fuel mixture by the way ?@@WarpedYT

[@josephpacchetti5997]

Between You And Todd @Project Farm, you guys are the best engineers on YT 👍🇺🇸 🤣 I just watched this two months ago! 👊😎

[@MadLadenstein]

Se excited to see a WP upload this morning! That looks like it would be wicked fun to drag race.

[@WarpedYT]

Thanks! I appreciate that. It's a little slow on the dog but once you hit 10mph it starts pulling hard.

[@rudeboysouljah1912]

Thank you for explaining the 360 cam. Cool piece of tech.

[@bobeyes3284]

I couldn't think of any other worthy reason to butcher a nice shifter kart, than fitting 3 jet engines onto it.

[@WarpedYT]

That is probably my favorite shifter Kart, It was insanely fast, however I do have another really sick shifter, you'll see it in the next video although for some reason this blue and white one was my favorite, But I couldn't put the jet engines on my other Kart which is brand new because of the color scheme... It's all red like everything is red.

[@bobeyes3284]

@@WarpedYT I raced as a kid. I also had/have a favourite chassis that's shamefully hanging on my garage wall. Your video made me go dust it off. Truly inspiring to see a professional fabricate the parts for the jet kart. Puts you in a different league to the zip tie crew. 👍👍

[@ltaldoraine7305]

Very cool project!! I'm excited to stay subscribed

[@WarpedYT]

Thank u I truly appreciate everybody's patience, I can't begin to tell you how much time and money and effort I have invested just to get geared up to the point where I can build stuff like this.

[@susan_beaver]

Awesome stuff, always love to see your work and it's very cool to hear your explanations of how jet engines feel to drive! It's not something I've ever had the pleasure to try, so it's always a great time to see a new video from you. Remember not to burn yourself out on video production (haha) but we do love to see it!

[@WarpedYT]

haha...., thanks, well I had a good break in the hospital so it feels good to actually get some stuff done.

[@johanveltheim4331]

Looks perfectly safe and not sketchy at all. I try to keep my turbines flying but I'm loving this!

[@WarpedYT]

Ha!, I feel it's fairly safe

[@johanveltheim4331]

@@WarpedYT Yeah, it's always good for safety to have a bit extra power in case you find yourself overtaking an 18-wheeler in a tight spot or something!

[@anthonyencarnacion7203]

The 411 on the go-pro is critical.. thank you..

[@OzarksWildman]

That dude has great t-shirt 😂

[@GeorgeToderici]

I am sure you have considered changing the angle of the jet engines as you turn in order to improve the turning performance. I'm wondering whether this is coming up in some future build.

[@christianbuczko1481]

A simple fin would vector the thrust, moving the whole engine would be far harder. Question is, do you direct it inwards to help corner, or outwards to prevent oversteer??

[@chrissjcgmail]

I'm thinking that articulated engines are not too difficult. Mount all 3 of them to a fixed platform that rotates with the steering. Should be doable.

[@ArdentFrog]

Great job! Props for backing off and staying safe

[@WarpedYT]

Thanks... I actually think that one of the hardest things to do. But seeing as I just got out of a 3 week stay in the Trama ICU back in September, I'm being a little more cautious

[@mideon13]

You say these projects are tough? Show that YOU are TOUGHER!!!! DEFY the laws of physics [safely] be your BADASS SELF!!!! We believe in you. Now make some kick-ass stuff!!!!! YOU GOT THIS.

[@WarpedYT]

Hahah.... Yes I believe I can do that actually, thanks!

[@mideon13]

HOLY CRAP!!!!! That jet cart is INSANE!!!!!!!! You're gonna need a bigger test track. Seriously, that parking lot is NOT safe. We love what you do, so please don't get hurt or killed. That said, the jet cart looks like a drift car on crack, filmed by Sergio Leone under the influence of amphetamines. Seriously, THAT WAS CRAZY!!! Way cool, but CRAZY! Please be safe. We dig your pirate style of engineering but safety first. Yes, I know, I sound like a square, but we enjoy your content and want to enjoy it for a long time. But yeah, that jet cart is AMAZING!!!!! Shalom.

[@WarpedYT]

@@mideon13 ha! Thank you, it is indeed insane and I'm pretty sure this is the highest danger level for a Go-Kart that I would build, this thing wants to just keep going

[@TomleyRC]

Good to see you back... and as crazy as ever haha

[@More_Row]

Definitely looks faster than a shifter cart as soon as you get up in the power band. Great project, I really want to see it on a straightaway going close to max thrust. Just make sure to reinforce those wheel mounts and make sure the tires can deal with that speed, as the diameter of them is small.

[@WarpedYT]

Thanks!! That's the plan. Absolutely those small tires or something that Can get overlooked easy, I don't remember the exact number but I think they're spinning at like 2000 RPM maybe more at 100 mph

[@thiswillprobhrt]

Kart, wheels and tires are good for 120MPH. They race at speeds like this at Mid Ohio, Daytona and other full size road courses.

[@mikeanderson2730]

When i was driving F1 kart back in the 1990:s, the zero to 60 time was about 2 sek and the topspeed was around 145mph. I forgotten how fricken fast that was, so this really bring back memories. Respect to this guy, i would never dare to go that fast again..

[@conancorcoran5367]

I feel that this thing would be insane with some thrust vectoring, with the engine pods turning left and right. Might help it corner better.

[@kricketflyd111]

Yep, that would help. 😂

[@JohnH20111]

it might help, but with 300lbs of thrust, it might also cause it to spin out, and that wouldn’t be good at speed

[@TeamStevers]

We need the standingmile times. Glad you are back.

[@kadz8674]

Hey dude really excited to see you upload again !! But i really hope you consider the aerodynamics and streamlines of the kart. The boost that it will give is phenomenal! Also what about bigger tires ? Might help

[@WarpedYT]

Thanks, this particular go-kart does in fact have all of the aero, as Friday and some like super aerodynamic shell, I don't think I would do that because I don't need to go any faster then 150 mph on a GoKart under any circumstances... I'm good. Additionally if something were to happen and there was a shell I wouldn't be able to get out.

[@cologames5634]

@@WarpedYT woah you really love jet engines, what a fanatic (in a good way) maybe try putting 5 big jet engines in your tesla for racing lol

[@kadz8674]

@@WarpedYT hm understandable, thanks for the response!

[@WarpedYT]

@@cologames5634 well actually you're kind of correct, I love anything engineering especially aerospace Defense, rockets jet engines, liquid engines, completely autonomous machines that carry out tasks. I just really wanted to finish up this jet engine trend I think I started, I'm really tired of everybody on KZbin copying me because I take too long or don't cover a subject in broad enough detail, But I really love extreme engineering.

[@cologames5634]

@@WarpedYT yea, kind of a maniac you are, mounting engines into cars, and after the 5 big engine video you would make, try to make a toy helicopter actually fly or try to make a heli fly e ven without the rotors

[@slash.9882]

Great video, inside edition pitbull guy!

[@WarpedYT]

Hahaha... Yeah crazy, and most recently I was on neighborhood wars.on A&E 😊

[@TheColorsInGreyLife]

Hey! wonderful video, loved the 360 degree shots. While watching it got me thinking about how your rear end is basically the same as an aircraft (jet or something) and you are really just trying to fight to point the kart in the right direction. I was wondering how difficult it could be to make exhaust that combine the 3 and add gimbleling, like thrust vectors on jet fighters. Graphite or some ceramic coated titanium that does a basic turbo oil (for a bearing fluid spherical coupler) lubrication for the gimble mount to a bell end area to recapture thrust. Its effectively the same as a rocket engine, but it of course is based on principles of mass ejection speeds to outright performance, however the biggest issues aren't those, unless you are trying to travel extremely fast. Upwards of 3 mach. Slower speeds allow for better efficiency of slower speed capture of escaping gas. The nozzle needs to be able to flare out in a multiple crimped manner way, it allows for further travel along the bell end from a boundary layer effect, to then have a given type of expansion that cools it off but also allows for the bell end to do its work energy capture. If not all that, maybe just a simple rudder like design that allows for some basic thrust vectoring that ends up helping total maintained momentum in corners, that and building a big old ram air pipe system to sit on and feed into all 3 of these jets. It would probably help quite a bit with giving it more air & having it be more consistent air flow through to the jets. Allowing for better burn overall, improving performance, but if you force more air in you can't go too lean otherwise you'll damage the jets, as I'm sure you'll know all about, same with putting more in as their is a point of a risk of over pressure, plus they are expensive. I would say a type of lower temp gas, butane, together with a given type of throttle body valve (tear drop like) at the choke point that still allows for a really high flow will work. Or maybe diesel with a little water thrown in from the ram air. Could keep temps down. Anyways, you would have to somehow hook the seat up to not get over heated from the heat transfer while also making sure the frame is adjusted to allow for it to be a part of the ram air intake system. Its so small that I doubt there would be no cutting involved. Anyways, hope it helps :)

[@brkbtjunkie]

That’s crazy the jets can run on diesel?

[@TheColorsInGreyLife]

@@brkbtjunkie yeah he had a video of the trust produced a long time ago put out of it running on biodiesel, most jets can run on a variety of fuels, I suggested butane because of how cleanly it burns but also it's low heat output. 3 exhausts into one would be hard to maintain the given structure & material performance in this application thanks to the given heat concentration point over the given surface area. But if you "crimp" it, put channels there it spreads the given total load over a larger surface area, forces the faster center gas flow, channel area flows, and in between stator like areas of slower boundary layer gas flows to mix and spread outwards into the bell end. But it's not just enough to spread the load, I suggested he needed to oil cool & lubricate the point like a turbo does to help it survive. Anyways, an after burner system after the nozzle point like I suggested in my Dyson fan jet engine video I made about integza video might work but it's not exactly going to allow for the efficient recapture the the expanding gases into the bell end without it being extended or having another bell end inside of the original. Also he could use a little lever on the steering wheel to allow for fine control of the total movement of the gimble and thrust vector of the system, however it would be needed to have a switch that has it swap sides during oversteer situations that allows for a recenter effect of thrust to be applied. Also an air premix manifold ring from the ram air into a Venturi system where the fuel is injected would help with better total air & fuel mixing for a better burn. Pressures in the nozzle can be helped out with gimble extension but since it's only a given total size of outright heat and thrust as a maximum then you can figure out the total nozzle size from some basic online math you could Google. Making it not necessary to worry about the total pressure constant at the nozzle point before the bell end. Be wary of laminar flows bouncing off of each other and not allowing for exhaust stream combining, I saw it on my feed for a water laminar stream & at that heat it can start acting similarly. However the channels & stators in the nozzle point will help break this up but produce a back pressure that kind of sucks, so allowing for a slight turbulence effect from the exhaust combining points will help, essentially a pipe slightly bigger, one slightly higher up, & another with some dimpling-ish to help but flare it out like a horn and it should combine just fine. But maybe he just wants to do 2 on the sides instead and get basic rudder controls or something? I mean he did say it was already starting to get too fast to control.

[@beamed5382]

This guy is something else

[@peterencobie]

Hi, great content again. I’m wondering if the stability/handling improves when you apply trust vectoring? It could be as simple as the steering nozzle like a jetski and connected to the steering wheel and turnig opposite from the steering motion. I think it should be more stable. For instance, when you steer a left corner the nozzles swing out to the right to counteract the oversteering. Good luck, and i am looking out for further content.

[@ianj8505]

I think some sort of aero-steering rudder system would help more and not lead to instability at high speed like vectoring thrust - which should be parallel to the tires at all times imo but ianae

[@WarpedYT]

I thought about doing that on multiple occasions, problem is that is not only an engineering nightmare but I think it would be much less predictable and very unstable... Only because you have tires touching the road, That extra friction in the straight direction helps you dig into a turn. Now thrust vectoring in the air is a completely different story cuz it's very PID, sort of like sailing a boat when you want to turn, but in the case of a land-based vehicle you want to turn instantly You don't want to have to start turning now to hit a corner 30meters ahead, If you make one miscalculation you don't have enough distance to correct and BAMM!

[@nathanieljames7462]

​@@WarpedYTIf there's a guy to solve for TVC on a jet powered gokart, you're 100% the guy Matt. Sorry to be the bearer of bad news 😅

[@WarpedYT]

@@nathanieljames7462 lol.... I could totally do it I just don't know if it's worth it unless maybe sort of like the hovercraft works, where you use thrust vectoring as steering, but that hovercraft is scary scary to drive, Even Rich rebuilds and his crew wouldn't touch it after I left, they wrapped up their video right there and then and shipped it to me lbvs

[@Decay19XX]

@@WarpedYT This might be a stupid question but could different kinds of tires help with the stability issue too?

[@Nothing-bh8cc]

very impressive especialy the manufacturing and cad design

[@WarpedYT]

Thank you I'm glad you liked it

[@Nothing-bh8cc]

@@WarpedYT will you add a afterburner in the future

[@danieljunior2382]

This guy is insane! Testing the shifter kart with only a backward cap on 😂 As a speed lover myself, 2 strokes are awesome! Nice video man Cheers from Brazil

[@J_is_everywhere]

The second go kart is already fast it self for me 😂

[@enginediy]

Cool Jets Go-Kart

[@jansuszynski3052]

I really like you, you are smart and cool guy, but it was very sad to me, to see you in that fake mr beast video. It was obviously fake, with cgi effects. It is really bad for your reputation. I'm very disappointed with you. What do you have to say about that to your viewers? Was you reputation worth the money?

[@WarpedYT]

lol.. which Mr.Beast video? I worked on about 10 Beast projects, are you talking about the train vs pit video?

[@jansuszynski3052]

@@WarpedYT yes. I'm talking about train vs pit video. It was full of fake cgi effects. I saw the video where you put 7 jet engines on a red car, and everything in this video looked real. I know you put 10 jet engines on that blue car, but I'm pretty sure, that results were enhanced with cgi. What do you have to say about that? And what is your opinion on his whole video? It looks really fake to me. You are the person who loves science, and I'm pretty sure that you know the laws of physics. Please, be honest.

[@WarpedYT]

@@jansuszynski3052 ahh yes, That video. Okay well I can tell you that I worked on three segments in that video, the train, the tank versus school buses, and jet car. As for the train in the pit, because of the weather And having a plane to catch, I wasn't there the next day where the train was launched into the pit... I can't comment as to what they did after I left. But I can tell you 100% for certain, the tank versus the school buses was 100% real, and the jet car did in fact go 600', I was very upset about the jet car, I designed and set that car up to actually take flight, that car should have went at least 1,500 ft before we had to land it, But because of the weather, I lost 2 days and I was rushing to get the car launched the day of their shoot, It all came down to a slight adjustment in the elevator linkage, if I would have taken five extra minutes to make that adjustment, the car would have actually flew and not crashed... If you want more details I'm glad to give them to you But that's a summary.

[@christophermarkrobinson3419]

This guy is a joke 😂 why would you even ask such a question?

[@WarpedYT]

@@christophermarkrobinson3419 not sure but he seems passionate, I think I answered his question, everyone is different but that why I pinned his comment, I wanna see what others think

[@PeterBothman]

I'm Peter from South Africa Cape Town.Friend believe me I was right next to you in that kart.I could feel you and the power if that kart cz I'm an adrenaline junky.I'm starting building go karts and it's a thrilling experience. Exercises my creativity cz I'm an Aries.

[@EdgarCCruz]

You have to take that beast to a longer straight road😁

[@CHIEF_420]

💻

[@TurbineResearch]

I love your videos man keep it up ❤ do a standing burnout in the alley for me 😂

[@iamalive8201]

Brilliant engineering fun that's what i call inspirational more fun needed in life.

[@jrob8931]

I would have “fueled” my pants too. 😂. Awesome Video!

[@kellynkarr]

The level of your genius knows no bounds. I truly appreciate your dedication to content. One of the GOATS of the internet. Thank you ❤

[@WarpedYT]

Ha! Thanks, it ain't easy... and this stuff is just the tip of the iceberg, except for with Mr beast I haven't brought any really insane things to my channel just yet, I have been prepping to do so for about 4 years now and I just recently got to the point where I'm geared up, I think 2024 will be the year. Thanks again

[@deaguacate]

Incredible video Thank you New subscriber ⭐️

[@kerrymonroe9059]

I am a jet engine mechanic and they work best with uninterrupted airflow and ram effect is necessary to achieve optimal performance and mounted behind the seat they might compressor stall without enough air. You can implement ducting directly into the airstream. Please be careful, these engines have not seen there full potential and I don't think you want to know what that is. Salt flats maybe, but great work that is a great achievement already! Be safe!

[@gremlin60]

next stop... 6 jets. Maby make it drive on the train tracks

[@PhillysHobbyHouse]

Dude you need to take that to a straight flat road and just absolutely send it!

[@sammcbride2464]

It would be cool if you could hook the engines to the steering and slightly turn them in the opposite direction of the front wheels like a jet ski does. Also add a cowling air flow feed to the jet engines from the sides since the seat blocks air flow. To me, it looks like you had more fun on the two stroke with the ability to play. Going in a straight line fast has its pluses, but shifter carts can go above 120 mph on a two stroke. At that speed, you are laying down. The upright seating is generally around 60 mph top speed. Anyway, both look fun.

[@iandavidson99]

Next try a mini turbo-prop engine driving the wheels. It converts all the jet engine's power into useful torque. I have on fitted to my Sinclair C5 :-)

[@feelincrispy7053]

Dude you’re editing has gone through the roof

[@jackgorbachev5753]

Definitely faster than the shifter cart the acceleration looks seamless

[@SGHOST2388]

Dude you could tell how sketchy that thing was by the video. I found you channel about 2 hours ago and I’m mesmerized man!! You are a true mechanical engineer and you are doing all of the exact things I would do given the means!! Keep it up I love it man!!

[@fleafrier1]

I know it would add a bunch of complexity to the project but if you found a way to couple the engines to the steering, so they vectored toward the outside of your turns, it might boost your cornering ability. Whatever though. This was a completely sick build. Nice work.

[@desdoan8509]

Wow 50 plus mph...freaking awesome,,,but I think the car can be built safer....in general....the chase and the engine...etc...im sure you can make it safer!!..all being said it still an amazing feat....im new to your Chanel,,love the things you build.....I d love to see you build an airplane,,will real miniature jet engines like the ones you mounted on the gocart....

[@davidhodge3894]

A lot of technology you have there.

[@rileyh2675]

Super hyped for the updates on all your projects. The gas powered tesla never gets old.

[@WarpedYT]

Thank you, I'm now in the 4th version of the cordless Tesla . I just finished a road trip recently that I show a bit of in this video, It went much better and there's a reason I'm posting all of my development on that car. 😊

[@joeharvell3819]

Add thrust vectoring!!!

[@anthonyencarnacion7203]

The practicality of your engineering skills are exciting.. i want the entire world to think that all Americans are this inventive.. usefull and just what they need.. an American..

[@pedromatajr8725]

Yes please make more videos!!

[@DCDLaserCNC]

Good to have you back on KZbin!

[@richardlemasters9684]

DUUUUUDE!!! This is BAD ASS!!!

[@T-he9is]

I like it, looks like a new beginning.

[@ProlificInvention]

Incredible, an awesome as heck video as always. Thank you

[@odrikronnin-gamer6579]

i am in love with that vehicle. A total circuit destroyer

[@butstough]

glad youre back, everyone the bell icon now

[@ejcrashed]

Man! You living the dream for us!, this series is amazing, keep it up!

[@WarpedYT]

Glad you enjoy it!

[@USMC-Sniper-0137]

Nothing like the smell of jet fuel in the morning to go with that delicious cup of hot coffee!!!!!!!!!!

[@Kargoneth]

Nice cart. Nice camera.

[@bimerev]

Great video :) loking forward on next one :)

[@Leroys_Stuff]

Nice to see you out and about

[@EEGworld]

Put it on the track and race it against a normal cart and one with two jets Awesome project!

[@jhacker5165]

That was BAD ASS!!!! As a gas turbine tech who works on LM aero's.... well done! The 3D printing is phenomenal. not sure if you're worried about FOD but a cool look would be some cone shaped air filters. Maybe take it for a rip on a runway, and get some water injection into the compressor. you think it was fast before..... it will be like hold my beer! hahahaha

[@WarpedYT]

Ha! Thanks, yes I have FOD screens fitted on every engine 🙂, as for the water injection you are correct , I want to try a few things but I need to make some sexy containment covers first, I feel confident but accidents always happen when you least expect it.

[@pierrojules]

That sound of jet engines is "delicious" to the ears.

[@Edawg312-sm6zm]

Looks like a lot of fun

[@manytrickpony695]

Great video. This insta360 is cool, too.

[@Nomad_za]

I am glad that you are back on KZbin! I hope you had a good break. My idea is to test engines to breaking point, I really enjoy those. But having said that, all your video's are awesome!!

[@WarpedYT]

Yeah been tough but I'ma try and stay on track this year, I'm excited to do some extreme videos.

[@WarpedYT]

Thanks

[@shawnkarvonen]

Pretty cool man High speed run!!!!!!!

[@ryanreedgibson]

Your GSD girl in the background is so cute. I have one too, her name is Candy, and she will not leave my side and spends all day long with me. It's nice to see you back. While you were gone, I grew three channels from 0 to fully monetized. None as cool as warped perception, though.

[@ralphpavero7760]

Dude you're sick and I want one AWSOME

[@allenstratton5399]

We need an Afterburner for one or all three!!!!!! Love your video's please keep up the all the hard work.

[@BlackstoneMalone]

Your an amazing engineer and machinist! I'd ensure everyone of your projects and videos dive further into these skills!

[@GWhisperer]

Needs a couple more jet engines!

[@ezrahuckabee82]

Fascinating and well done!

[@WarpedYT]

Thank you

[@firestorm780]

Comeback of the one cylinder diesel engine maybe? See trough? Maybe shifter diesel go kart Nice to see you back!

[@AreSeeModdler]

Very nice Matt...always good to see your vids.

[@renaissanceman7145]

I am very impressed engines that size are powerful enough to propel a wheeled vehicle with a grown man that fast. AND, you are confident it can go even faster! Very cool!

[@captainkyperplayz1162]

A couple ideas my non-expert self thought of when watching this 1) what if you enclosed the system with smooth paneling to make it more aerodynamic, and installed S-ducts much like those on the Lockheed Tristar to redirect airflow directly to the engines? Right now the seat disrupts the flow of already moving air, and installing an S-Duct to the intakes could improve air flow 2) Have you considered the idea of designing a turbofan engine? If you installed one or two turbofans in place of those 3 turbojets, you could greatly increase fuel efficiency