Jetson Bolt Pro Electric Bike Assembly

In this video the boys and I will be doing an unboxing and assembly of the Jetson Bolt Pro electric bike we picked up at our local Costco. The item number for Costco is 1426314. Jetson's part number for the bike is JBLTP-BLK. We've been wanting to try an E-Bike and when we came across this one I couldn't resist, especially at this price point.
I have also prepared another video (Part 1) that will cover features, testing and a review of the bike. Make sure to check it out!
• NEW! Jetson Bolt Pro E...
Here is a link to the manual:
cdn.shopify.com/s/files/1/253...
Here is the bike on Jetson's website:
ridejetson.com/collections/bi...
Thanks for stopping by and supporting my channel.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.

[@brightlightdun]

nice video. However, don't forget there is a safety clip you need to turn when the handle bar is up and locked.

[@javosgarage]

@de_Z - Thank you for the compliment! Thank you for pointing the safety clip out, somehow that got edited out and I didn't catch it. I'm going to pin your comment at the top to remind folks. I appreciate you stopping by and and taking a moment to leave some great info - thank you.

[@user-rq9el8xy2n]

Your video helped me a lot. Thanks! But l don't understand the conversation you had about a safety clip. Is there something else to do?

[@javosgarage]

There is a small, black, plastic safety clip (or ring if you will) located by the locking mechanism for the handlebars. You rotate the ring around and it acts as a secondary safety to make sure the handlebars stay locked in the "up" position in the event the locking handle should fail or come loose. Hope that answers your question.

[@noahrosales7088]

Same that

[@InAHollowTree]

I was having a problem getting the seat to latch. Thank you for explaining and fixing my issue!

[@kimberlyakt8931]

Thank you for this video! I had trouble getting the seat to stay in place but watching your video made it so much easier.

[@jjpac2011]

Excellent job. Watching this after just getting back from my Costco and unexpectedly finding it in stock. It's still in the box and after your video I feel completely prepared to set it up w/o having to look at any instructions. Thank you.

[@arkethiaterrell1315]

OMG!!!!!! I didn't have to read instructions, you were right on, That's coming from a 66 yr old lady. You are awesome, I thought I had to pay a mechanic at least $100.00 to put it together. Thanks to you I've done it myself and saved me a boatload of money. :)🤜🏽🤛🏽.

[@javosgarage]

Well thank you very much Arkethia, I really appreciate the compliment! It always makes my day to hear one of my videos has been helpful to someone. Thank you for stopping by and taking a moment to leave me a comment. I apologize for my delayed response, I was away from YT for a little bit.

[@dannydanix8698]

I really enjoyed your video/illustration, and thanks for the pedal tips. Thank-you from Ethiopia.

[@samhamrahi9185]

Very helpful! Thanks! Got it done in about 15 minutes with your help.

[@javosgarage]

@Sam Hamrahi - Well thank you for the compliment Sam! Always glad to hear one of my videos has been able to help someone. Thank you for stopping by and taking a moment to leave me a comment!

[@thereissomecoolstuff]

Good stuff. Starting mine tonight. Sometimes I get overwhelmed with instructions. You made this very easy. Pray for me. The last time I tried to put together a bike I lost my right eye and suffered a 3rd degree burn under my chin.

[@mindyholiday8391]

VERY nice video.. just bought 2 bikes from Costco. Good tip for tools also! Nice of you to share this info!

[@veralong4387]

Thanks for the help, you made it so easy

[@wenh428]

Thank you for the detailed video! This is exactly what I need.

[@javosgarage]

Awesome! Glad to hear my video was helpful to you.

[@andiegomes2764]

Great video n editing the basic simple fast n straight forward

[@royromero1851]

Thanks so much i just got one yesterday and this vid helped me

[@javosgarage]

@Roy Romero - You're very welcome Roy. It always puts a big smile on my face to hear one of my videos has been helpful to someone. Thanks for stopping by and taking a moment to leave me a comment - much appreciated!

[@jamesstalnaker8937]

EXCELLENT, very informative.

[@rowenamallari2651]

Excellent! I learned a lot! Thank you😀

[@javosgarage]

You're very welcome Rowena, I'm glad you liked my video!

[@hemokitty11]

Thanks for the detailed explanation 👍

[@javosgarage]

You're very welcome! Thank you for stopping by and taking a moment to leave me a comment.

[@trentcolledge323]

This man is the goat

[@fudgeadool]

Fender part was very helpful thank you!

[@javosgarage]

@Fudgeadoll! - Glad to hear my video was helpful to you. I know this part can be a little tricky during assembly so hopefully this made the job easier for you. Thanks for stopping by!

[@WestsideSteveSimmons]

Hi Bud! I just purchased one of these at Costco' amazing they are available in a lot of places but Costco is like 200 bucks less! But the most important thing is your video save me $50 for assembly fee! Thank you sir.

[@snafuperman]

i bought 8 today at costco. going to resell them because after xmas they'll be 1,000 dollars.

[@backyardflyer9914]

Very helpful video👍. I wish you made a video for every new product I have to assemble 😁

[@javosgarage]

@backyardflyer99 - Well thank you! It's always nice to get an idea of what a job will entail before you start so I'm super glad to hear my video was helpful to you. I hope you enjoy your bike. Thanks for stopping by!

[@happyguardian2000]

great vid

[@FromtheMuscleTV]

Thank you this video was very helpful.

[@javosgarage]

@From the Muscle TV - You're very welcome! Glad to hear my video was able to help you. Thank you for stopping by!

[@Decoyow]

Informative! Thanks!

[@javosgarage]

@Dekoyz - Thank you for the compliment! I'm glad you found the information useful. Thanks for stopping by and taking a moment to leave me a comment - much appreciated!

[@JustHonestContent]

Thank you. Very helpful.

[@javosgarage]

@Manna from Heaven - You're very welcome! Super glad to hear you found my video to be helpful to you. Thanks for stopping by!

[@Jackie-qw7ew]

Thank you for this helpful video! The assembly manual from Jetson was no help at all. And unfortunately, my refurbished grade A bike came with a missing part to the seat clamp so now I have to wait until they get back to me. I was trying to figure what was wrong for the longest time until I saw this video.

[@thatairsoftguy24]

Thanks helped a lot I just bought one

[@javosgarage]

You're very welcome. I'm super glad to hear my video was helpful to you.

[@melanier7059]

Great video

[@javosgarage]

@Melanie R - Well thank you Melanie. Hopefully the information was helpful to you on your assembly. Thanks for stopping by!

[@alamin-fr8rc]

Thank you!

[@Ranlocks]

Thanks, instruction for installing fog light was non-existent in manual. The fender was a pain to install using the supplied tools and I ended up using my own. I wish I had watched your video before I started, installation would have gone alot quicker.

[@rahularora9868]

Tools required (included but easier if you use larger ones) 5mm Allen key 10mm wrench 15mm wrench Philips screwdriver Thanks so much for the video. This is just reference for me and for anyone that might find it useful.

[@javosgarage]

Great info to leave Rahul so thank you for doing that. I appreciate you stopping by and taking a moment to leave some valuable info that will help others.

[@EdwinRodriguez-jf3wo]

Good!!thank you!!

[@javosgarage]

You're very welcome! I'm glad you liked the video.

[@betterbelieve382]

thank you.

[@javosgarage]

You're welcome

[@tyranneous9693]

Can you help me? I just rode mine for the 1st time and it keeps making a grinding feel & noise when pedaling with PAS on, at the same part of the pedal rotation. Throttle only, then it's fine. Pedaling w/motor OFF, then it's fine also. I also took it on a dirt trail almost right away, but got off of it after 50 feet because this bike couldn't handle it. Not sure if something got knocked out of whack. Please help. Thanks and subscribed.

[@saroushkay1340]

I’m not sure if you have this problem as well my throttle is a bit wiggly and I could slightly get feel it go up and down if you have a fix for it please let me know I already tried tightening it

[@eduardorivas3776]

How many miles for capacity of full battery lithium rechargeable

[@lapstreet21]

When i clamp the seat, it still moves around when i am seated. No idea how to fix it.

[@Brandon-ir8pq]

When the bike main handlebar is folded, does your inside stem have any rust? Thank you

[@javosgarage]

@Brandon - Hi Brandon. Sorry for the delay, we decided to get away for a few days so I'm just now getting a chance to respond to comments. I went out and checked ours and there is no rust. It's all painted black. You may need to contact Jetson and have them correct the problem. Thanks for stopping by!

[@shahramzamanimortazavi9464]

how does the analog bell on Bolt Pro work? Can you show it by a video?

[@javosgarage]

@Shahram Zamani Mortazavi - LOL!! I love your sense of humor! Yes, I found the "analogue bell" pretty funny in the description as well. Well, I guess they had to call it something so adding "analogue" to "bell" made it seem more technical. Thanks for stopping by and taking a moment to put a smile on my face today, thank you!

[@mirreybook5577]

👌🏻

[@certifieddrake]

Mine just arrived and I don’t know how to put on the pedals

[@javosgarage]

@Truly_WAKANDA - You got this. Your pedals should have a sticker labeled "L" and "R". The "R" pedal goes on the right side of your bike when you are sitting on it. Another example would be the "Power" button on the handlebar is on the left side of your bike and the "Cruise/Light" button with your power indicator bars are on the right side of your bike. There is a wrench included with the bike that you will need. The pedal on the right side of the bike is tightened by turning your wrench clockwise (as you're facing it) but the pedal on on the left side is a reverse thread so you would turn it counter clockwise (as you're facing it) to tighten. Hope that helps you. Let me know if you have any other questions.

[@pizzatime9604]

Hey i just got this bike in the mail, and I’m having a tough time assembling the fender. When I put the washer and nut on the back side, the washer just falls out and when I finally manage to get the nut on as well, it also falls. How do I tighten the nut onto the bolt? I tried twisting it but that doesn’t help.

[@javosgarage]

@Pizza Time - Hi Pizza. It's certainly possible you could have a problem with either the nut or bolt. Try taking the bolt out and see if you can get it going without struggling in the small space just to make sure there's no problems. If you can get those two to work then you'll have to try again but realize these are a fine thread so you have to be at the correct angle or it just won't work. If you accidentally cross threaded it or it's defective I would make a quick run to the hardware store (or dig through that bucket in the garage we all have LOL) and get a replacement. Not ideal, but it's the solution. Another thing, that nut is a nylon locking nut so it is not going to be easy to just hand tighten, it will require tools once the bolt engages the nylon lock ring in the nut. The nut is designed to be tight and not loosen over time, this also makes it more difficult to install. I hope this will help you get your bike assembled because you're going to really enjoy it. If you have any other questions please feel free to ask and I'll be happy to help any way I can. Thanks for stopping by!

[@pizzatime9604]

@@javosgarage thanks so much! I finally got it on

[@fudgeadool]

SAMEEE

[@Cashalathomas]

Hi I’m also having issue with this part . When I put the nut on and I start to screw it on, it stops screwing. Am I NOT supposed to screw the nut on? Am I just supposed to apply the nut and then use the Allen key to tighten it?

[@javosgarage]

Correct Cashala. Assuming it's on straight and not cross threaded, when it gets difficult to turn means you are engaging the nylon lock ring and will need to use tools to continue. The nylon lock ring keeps the nut from loosening over time.

[@coolguy9370]

what about the damn bell?

[@malachimaddox927]

Anyone else’s seat is like loose and easily separate from the seat pole easily?

[@hoainguyen.]

DOES your EBIKE STILL WORKING 😛

[@rafirahmani8718]

I don’t need to put the fender on

[@hoainguyen.]

💯😁😁 DOES your EBIKE STILL WORKING ? 👅

[@Roblox_PlayZ_shorts]

00

[@jimlahey8862]

My cruise control does not want to work any ideas what it might be it was working fine last weekend i take my dogs on there doggie trailer i pull ther doggie trailer with my e bike my dogs are small mutts but i dont no why my cruise control gave out any ideas what could have made it go out

[@vickyr9076]

Very helpful. Thank you.

[@javosgarage]

@VICKY R - You're very welcome Vicky and thank you for the compliment! It always makes my day to hear one of my videos has been beneficial to someone. Thanks for stopping by and taking a moment to leave me a comment - much appreciated!