Awesome very very important video 😊

Brilliant instructional video!! Many thanks! Watched it and immediately knew what to do. Replaced both mirrors on a 2005 Town & Country within 30 minutes. Fully knowing I was going to perform the replacement myself, I got an estimate from a local body shop just for grins; $600+ for a single mirror. Unbelievable.

Curious as to why you are changing the intake gasket? What were the symptoms you are fixing

What do I lube the O ring with? Motor oil or coolant?

Great video! Spot on and perfect instructions. I greatly appreciate you.

Did not notice if you had the front suspension jacked up.

I am so glad this isnt a se_ video

followed vid to the letter, but something must have gone wrong as key goes in with no problem but will not turn switch. thinking maybe big tab and small tab were on the wrong side. now will not come back apart to try and correct it is there a way to disassemble?

I bought a Pre disassembled. F150 and I’m missing half of the bolts. Is it worth salvaging? I bought it for $400 so it isn’t a total loss. But I was hoping to rebuild it.

Thank you so much for this video, I deliver mail out of an 06 TNC and I accidentally backed into an oak tree last week and busted the glass, what a mess! Now I know to do!

I’m doing this on a cobra 4v and it’s driving me nuts, I can’t get it aligned with the dowels and it’s not going onto the oil pan fully, you can remove all the bolts because the subframe runs under it! I need help pleaee

thank you, this video helped me with my boss 290

Great

Awesome video!

Great video, thanyou, exactly what i needed to see.

Why didn’t you change the rings and bearings

Very nice video. Informative. I watched to see if I wanted to build storage where the panels are.

Big help✌️

You're the Bob Ross of auto videos...LOVE IT! Thanks for being so thorough!

Can one person set this up?

Ty for ya videos u helped so much

My van has been making a slow turn sound, brief, before starting ad normal. I went to buy a starter since the original is still on the '05, and the auto parts store tested it and said it was fine about 10 days ago. Alternator and battery are 2yrs old. Now nothing happens. Nothing! So hopefully your informative video will get me through this. Not sure I know where to put the jack...starting at the very beginning but money is tight so it's on me to do it. Thanks!

I am from Saudi Arabia and I really like the video, which is neat, clean, and beautiful❤❤❤❤

So..i have an 03 corolla. for a while the air bag light was on. Then one day the horn wouldn't shut off, so I disconnected the plug at the horn to shut it up. A few weeks later I discovered the cruise control isnt coming on either. Does that also sound like a bad clock spring? They want 325 bucks for a new one at O Reils', so im trying to make sure that's what's wrong before I commit to the order.

thank you,, i save $2000 for service

Great video just what I was looking for. I love getting educated about the motor in my truck.

I have a problem. Would you be available to reply with suggestions? Thanks

How do you get the rear 3 plugs out? Big job right

I need to reseal the oil filter housing on my 2009 Chrysler town and country with the 3.8 liter engine, thank you for making this video. Very straight forward job from what you posted.

Awesome video. Thanks. I have just removed the scuff plate on the driver's side door. I noticed that on the plate, two of the retainer clips are rusted and I would like to replace them. Do you happen to have the part number for the retainer clips?

Man I love your videos and how well you explain how to do well, everything that you explain.!!! GREAT JOB.!! Keep it up man thank you so much.!.!.!

I’m planing on buying this for a trip to a lake do think it would hold up a few more feet underwater or no?

Absolutely excellent job!

Fucking ford strikes again, There's no reason for special tools especially the crank alignment tool the cam tool is ridiculous also. The left cam a socket was used, simple.marks on the block for crank key,simple. Just goes to show ford engineered is not user friendly. FF. F%$k Ford

Great teaching Buddy, Thanks

Hey Javo, what is the torque on the intake manifold bolts when re-installing? I heard both 87 inch pounds and 105 inch pounds.

Awesome to see the kids involved wished more DIY dads out there shared that bonding experience

Can you show folding it back up?

Made it look brand new 💯

This is whats going on with my 2008 Lincoln navigator now. My wife brought my truck back saying this fell out with the key🤔

This man is the goat

Great video

Is this the same for the 4.6l 2V?

I have a 2002 town and country. How do I remove the b pillar trim on front doors. I want to repaint them and re install

Started doing this today and one of the lower intake manifold bolts broke off, so at a stand still till I can find new bolts and get the old one out.doesn't help it has 263k on it lol.

Thank you, sir. I coodnt find the long bolt until I saw your video. It's dark out now. But i will finish tomorrow, thanks so much.

I got a 2018 6.8 triton. What thread repair kit would i use.

Mine will not open. The bar release will not work either. What's next?

Thanks alot for the help great video with step by step. Help me changed my broken handle