BD-61, Cable and Pulley Assembly | Valor Fitness

[@elliottengstrand5988]

So they changed the double pulley bracket but there's no updated video to show how that works and the link in the new instruction manual still brings you here. That's cool.

[@christophergray3189]

I was dreading this part of the install. Not so bad. Would have been IMPOSSIBLE without this video.

[@jamesvanderbleek2271]

Thanks Christopher, glad the video helped.

[@samwilson9459]

Helped a ton, thank you! Only feedback is maybe mention something about the two way pulley attachments on my machine look different than the one in this video. Probably a newer or older model.

[@ValorFitnessInc]

Correct, we added the small attachment a few years ago but did not update the video. Once a video is updated, you lose your place in line with regard to the views and momentum you have gained. The addition, or change in the video, we felt would not disrupt the end result with the new unit from the old video. Thanks for being detailed in watching all of the video.

[@elliottengstrand5988]

​@@ValorFitnessIncSo you're more concerned with the "views and momentum" on a tutorial video than having it actually be an accurate tutorial? Are you guys thinking people just click on random tutorial videos for fun and that having more views is getting you more product sales?

[@pedrobarraza3989]

Great video!!! I couldn’t have done it without you My Man! Appreciate it! 😎

[@chrisdavila9056]

1,000 times better than the other 3 videos with no audio. Thank you

[@lewisjensen3577]

Way better than the old videos!

[@gtivr6racer]

Agreed

[@brightbluesky1548]

We looked at the instructions and they didn't have anything labeled but figured out what bolts went where .. tough at first but we got it... When we got the the pulley system the piece of paper was NOT helpfull... Haha guess that's why we're all here. Hooked it up first try watching the video and we're lifting already. Nice equipment, weights, and accessories. 10/10 recommend

[@jamesvanderbleek2271]

BBS, thanks for the nudge that we need to do a better job in our manual department. I will admit, we need to improve this area. Our best teachers to a better manual are customers like yourself. Thanks for the comments. Jim (Owner)

[@icejiujitsu1]

Never would of figured it out from the directions, could of saved myself 1hr of headache just watching this first lol. We rolling smooth now.

[@ValorFitnessInc]

Glad to hear that you mastered the BD-61 installation! We are doing more videos because we know our instructions can be hard to understand. You can always reach out to us if need any assistance in the future.

[@madscientist06]

Outstanding! Would not have been able to do this without you!!!

[@mc85eu]

Extremely useful video - this pretty much means I'm going to need to save up for a BD-61 now! Thanks... ;-)

[@jeffreypalmer3824]

God bless you bro I would have never got this without your video 🦾

[@drbenpetersen]

This was so helpful thank you!!!

[@ValorFitnessInc]

You're so welcome!

[@gtivr6racer]

What are the pulley sizes on the machine or where can I find the instructions to download..i bought one 2nd hand and need to replace some and I am thinking about just upgrading them all to aluminum.

[@robertgreen5984]

When could Valor Fitness build a lat pull down attachment bench with leg/knee support to use with the BD-61?

[@gerardoserrano4801]

Glad company added this video because paper instructions are bad. Bought mines in June and didn’t have this video but another one. No excuse now.

[@geraldodria7010]

Thank you, great video. It made my install process smooth and perfect! I love this machine! Great value, I bought many attachments and I can perform many exercises with this cable machine.

[@ValorFitnessInc]

Glad it helped!

[@sallyherrera2718]

1u. P j q

[@TheRealNelly23]

This video made it so easy.

[@ChainBrothersMTB]

Thank you so much- made it super easy to do!!!

[@ValorFitnessInc]

Glad it helped!

[@garrettupson7744]

@@ValorFitnessInc is there a video of the entire assembly? Frame and all? Not just the cables and pulleys?

[@ValorFitnessInc]

@@garrettupson7744, thank you for reaching out! At this time we do not, however you should have received a manual in your BD-61 boxes upon delivery. If you have any questions about the assembly process while putting it together, please email [e-mail] and he will be able to assist you.

[@Alex-jw3up]

This’s video came with my system, but I don’t have the same attachments

[@Lxr109]

Receive mine yesterday, with a little adjustment and additional silicone lub it’s working smoothly and I enjoy working out with it. My question is does Anyone knows the pulley size? Might be interested in upgrading the pulley to all aluminum in the future.

[@ValorFitnessInc]

The pulley size is 90mm. Keep in mind that if you do modify the product, even by changing the pulleys to aluminum in the future, you will void your warranty.

[@dambro6418]

just bought it and I got it, just a question. 1. when I pull the pulleys with no weight on I can literally let go of them when pulled out and they will just lay there and not go back in. 2. also where does the m8 65 screw go in?

[@ValorFitnessInc]

If the guide rods are overtightened during assembly this can cause tension on the plate carriage. Try backing off the bolts a bit. If this doesn't fix the issue please contact us at [e-mail]. The 8x65 screw goes into the frame to secure into your foundation if you choose to. The hole is located on the bottom frame behind the plate carriage.

[@dambro6418]

@@ValorFitnessInc Ok thanks, also Is both the side cables supposed to run as smooth as the top and bottom cable in the middle of the machine, cause i find that the middle top and bottom ones pull the weight down a lot more and feel way smoother, have i done something wrong or are they like this? i tried loosening the screws on some of the pulleys but it doesn’t work

[@ValorFitnessInc]

The crossover cables travel on an angle and travel through more pulleys than the top and bottom cables. With weight on the plate carriage the cables should still pull smoothly. Ensure that none of the pulley sleeves have been overtightened and consider using a silicone lubricant on the pulleys. If this doesn't improve the function of the cables please contact us at [e-mail]

[@frankyavocados5794]

what size are the cable wheel pulleys?

[@tonyrobinson9328]

Great video, the instructions was not very good when it comes to the pulleys but for the frame the instructions were good It would have taken much longer without this video. I am not sure what the tapping screw is for, but I used everything else. Also in the very back bottom behind where the weights are loaded there is a hole facing up, what is the purpose of this?

[@jamesvanderbleek2271]

Tony, I cannot find the hole you are talking about. Is it visible in the video? if so, what "time mark" in the video can it be seen?

[@richiepawlowski6848]

Question....I have the first longer cable installed. Of course after getting it all the way through to the other side the cable wants to kink on the initial side in between the fixed pulley up top and the hanging pulley in the middle causing the two hanging pulleys to want to twist. Should I continue on and hope that when I fix the pulley that ties those pieces together at the bottom that it'll straighten itself out or should I rethread this and hope it doesn't link again. It's on little section that wants to twist of course.

[@Yasin_Abdul]

At time 4:56 is where I have a major problem. Both round pully balls are the same size which looks like I have to do some kind of trimming 🤦🏽‍♂️

[@TruthFLA]

There is no double pulley bracket. That part has changed

[@mattarenz1195]

Is there a preferred way to break it down for a move? Gotta get it thru a normal size door

[@x-na8ion286]

Got mine all set up but when use it feels like the weight goes down slow could it be the pulleys to tight or sonething

[@ValorFitnessInc]

thank you for your inquiry. Please reach out to [e-mail] and we can assist further.

[@Mannycreated]

When is this coming back in stock?

[@ValorFitnessInc]

The BD-61 is expected to be back in stock within the next two weeks. You can sign up to be notified when it is available on our website here: valorfitness.com/products/valor-fitness-bd-61-cable-crossover-station

[@Mannycreated]

@@ValorFitnessInc thank you so much for the reply!!! This is the last equipment I want so I can finish my gym setup!! Will definitely sign up!! Thanks again 🙏🏼

[@petrobob]

Dude!, thank you, lol. Went together easy peezy lemon squeezy after ur vd.

[@ameensharan]

Nice! Any video demo for 1:1 cable ratio?

[@ValorFitnessInc]

At this time we do not.

[@set2374]

I just ordered from VF. What size pulleys does it use and how many of each? I would like to upgrade to aluminum if possible. Thanks.

[@ValorFitnessInc]

Thank you for your inquiry. Please reach out to [e-mail] and we can assist further.

[@gerardoserrano4801]

Do not use wd40 it’s not a grease! USE “super lube multi purpose synthetic grease” literally made my machine usable after using it. Weight holder goes down now without any weight on it. Also for Lat pull down to hold yourself down I drilled two 7/8” holes on the middle beam and use a 7/8” diameter by 36” long metal rod. Bought some foam rollers from Amazon and can finally lift heavy on the machine. Hope this helps. Btw I also tried silicon spray but found the grease to work the best and stays working longer before you need to put more grease.

[@klyleank]

Great video... but i have to say you put the main part with the attachment grip spikes on backwards!!!!

[@klyleank]

Not important for the instructional cable attachment video though, follow the steps

[@ValorFitnessInc]

The main post with the storage hooks is shown correctly in the video. There is a pin at the bottom of the post to hold the ball stop on the cable in place. You can see the pin at 7:12 in the video.

[@spy1411]

Yes, I was wondering the same thing bc I've seen it both ways online. I installed mine facing the front... if I need to change it later I will but so far it's working ok facing that way.

[@rontbrown]

@@ValorFitnessInc the picture on the instructions have the pins installed facing forward. This video and the picture on Amazon have them facing the rear.

[@yvettebienaime877]

will this rust if kept outdoors

[@ValorFitnessInc]

The BD-61 will be more susceptible to rust if kept outdoors. We would recommend storing the unit where it will be protected from the elements.

[@louloz7664]

New bd-61 has different parts when assembling the top section of the pulleys. This video doesn’t explain that. There’s a video from @madscientist06 that helped explaining that specific section.

[@dam0222]

Ugh i have such a frustrating issue with this machine. when there is no weight on it doesn’t pull back plus when i’m doing movements it’s just not smooth at all. Please watch my latest video on this issue shown. Thanks

[@ValorFitnessInc]

Please contact [e-mail] and include the link to your video so we can help you with your BD-61.

[@syedsajiduddin1173]

That's cost an India ? How and where buy?

[@cjhenry0101]

When will it be available again?

[@ValorFitnessInc]

We are expecting the BD-61 in November. You can sign up on our website to be notified when it is back in stock. valorfitness.com/products/valor-fitness-bd-61-cable-crossover-station?variant=34626901573782

[@kostaskotsopoulos79]

Great Video and extremely helpful. You may want to also tag the following equipment as well to get more hits. No video available for it but exactly the same setup. AmStaff Fitness DF2108 Functional Trainer

[@ValorFitnessInc]

Thanks for the tip!

[@kuuleezleez8069]

Heloo friend i want to help...

[@bullitts]

You never used some of the bolts... you used the M-40, M-70, M-75 but you never showed using the M-65’s ?????

[@ValorFitnessInc]

The M-65's are used for the frame of the BD-61 - specifically at the bottom of the unit - so it is not involved in the video for the cable and pulley assembly. Hope this helps!

[@bullitts]

@@ValorFitnessInc Got it - thank you!

[@ValorFitnessInc]

@@bullitts you bet!

[@travelertim88]

Do not buy this product.I have tryed everything to make it smooth.The pulley wheels are garbage.

[@ValorFitnessInc]

Please contact [e-mail] so we can help you with your BD-61.

[@frankyavocados5794]

what size are the pulley wheels? I wanna upgrade to aluminum ones