If you have any questions, please feel free to contact me~ Below is my Alibaba product link, you can contact me through the link~Welcome!!!Or add my WhatsApp:86 13124231260 www.alibaba.com/product-detai...
Пікірлер: 61
@OffGridGarageAustralia2 ай бұрын
Can't wait to show the case on my channel!
@EELBATTERY-Miya2 ай бұрын
Haha,thanks for your support!!!you won't be disappointed! If you have any questions, please feel free to contact us~✌
@OffGridGarageAustralia2 ай бұрын
@@EELBATTERY-Miya Really looking forward to it!
@solarcharging97432 ай бұрын
@@EELBATTERY-Miya I heard that your company is not responding to your customers. Is this true?
@EELBATTERY-MiyaАй бұрын
@@solarcharging9743 No, how could it be possible? I will always reply to my customers! I will help my customers solve any problems, and the same goes for other colleagues. We will all help customers have a good shopping experience from purchase to completion.
@EELBATTERY-MiyaАй бұрын
Maybe she forgot to reply when she was too busy, so just send her another message!😁
@GJEELANBAIGАй бұрын
good job
@EELBATTERY-MiyaАй бұрын
Thank you,you are so cute!
@DanBurgaud2 ай бұрын
NICE EEL now uses JK BMS! It is tested to have superior functions against the others. CHEERS!
@EELBATTERY-Miya2 ай бұрын
Thank you very much🥂!CHEERS!
@Handy-Harry2 ай бұрын
Great! Looking forward to assemble mine. It's on it's way
@EELBATTERY-Miya2 ай бұрын
Ok nice🥰Feel free to share and come to me for consultation if you have any questions ~ I look forward to our long-term cooperation!
@GregOnSummit29 күн бұрын
Have two on the way, with the wheeled cart.
@EELBATTERY-Miya27 күн бұрын
Thanks for your support~
@solarnongnghiepКүн бұрын
hi !
@GregOnSummit7 күн бұрын
Is there a manual? Something for loading the cells?
@EELBATTERY-Miya6 күн бұрын
Yes!Just finished it recently~
@angyp7426 күн бұрын
I had one of these delivered yesterday. Can't recommend it to be honest. The connections from BMS to Battery and BMS to terminals are insufficient and should be flexible busbars. Mine got shipped with the wrong busbars even know we discussed that my batteries have single M6 studs on them. I have contacted Howard from EEL and had no response. I am looking forward to what Andy and @OffGridGarageAustralia have to say about the box.
@EELBATTERY-Miya24 күн бұрын
Okay, I have contacted him to reissue it for you~Please check~
@angyp7423 күн бұрын
@@EELBATTERY-Miya Thanks new busbars are on their way.
@ParagonDIYАй бұрын
Nice :)
@EELBATTERY-MiyaАй бұрын
Thank you!Thank you for your support!
@Electronzap2 ай бұрын
Nice.
@EELBATTERY-Miya2 ай бұрын
Nice nice!!!Thanks for your compliment!
@user-fv6tf2ef2b26 күн бұрын
Hello from Greece!!! Have you got anything in the EU stock to order ?
@EELBATTERY-Miya24 күн бұрын
This battery box will arrive at the end of May~Now the European warehouse has batteries in stock. You can buy batteries first and then the battery box. I am afraid that the batteries will be sold out after the battery box arrives, so if you need it, please book with me in advance~
@meins2881Ай бұрын
Can you please tell me what is the cable cross-section of Plus-cable from BMS to fuse and inverter connection (outside the box). Is it „only“ 4AWG (5,19mm / 21,15 mm2)? Or AWG 4/0 (11,68mm / 107,2 mm2)?
@EELBATTERY-MiyaАй бұрын
We have 30 square millimeters and 50 square millimeters to choose from~
@meins2881Ай бұрын
@@EELBATTERY-Miya I mean the cable which is mounted at 1:09 min (and the two minus cables). Looks a bit thin for 200 amps.
@EELBATTERY-MiyaАй бұрын
@@meins2881 I haven’t measured it specifically, but you can rest assured that they have been tested by technicians and reviewed by the state, and can fully support 200 amps.
@Juergen_Miessmer21 күн бұрын
@@meins2881 The two black cables to the BMS are 7AWG 10,6mm2. The red cables are 4AWG 21,2mm2.
@Sila_energy_alternative2 ай бұрын
Здравствуйте, вопрос , можно сбросить jk bms кнопкой на заводские настройки ?
@EELBATTERY-Miya2 ай бұрын
Yes
@Sila_energy_alternative2 ай бұрын
@@EELBATTERY-Miya здравствуйте, поделитесь пожалуйста информацией, как можно кнопкой сбросить jk bms на заводские настройки?
@EELBATTERY-Miya2 ай бұрын
@@Sila_energy_alternative Какой номер модели вашей JK BMS?
@Sila_energy_alternative2 ай бұрын
@@EELBATTERY-Miya номер модели JK-BD6A20S12P
@EELBATTERY-Miya2 ай бұрын
Есть кнопка сброса, просто нажмите и удерживайте ее в течение 10 секунд.@@Sila_energy_alternative
Because our engineers often assemble, they are very skilled. We are currently considering buying a pair of insulated gloves to make everyone safer.
@Juergen_Miessmer21 күн бұрын
My review: Delivered after 4 months. No Manual at all, even no hint to this video in the box. There are only 4AWG or 2 times 7AWG cables. This is way to small for 200A. The cables are getting hot! You have to twist some cables, because some ringlocks or ferrules are mounted by 90° or 180° to the wrong direction. BMS B+ had no ringlock. Some screws were missing. Screws for compression plate are to short. No chance to get them in. Balancer PCB have no mounting support near the connector. This can cause a short while pushing in the connector, because PCB bends down and touches the metal bracket. The cables of the temp sensors are to short to thermal glue them on the alloy of the cells. (Mounting them on the cellbridges makes no sence.) The balancer cables are glued to the PCB pointing sidewards witch causes them to touch the sharp edge of the mounting rail. Comes with flexible 40mm2 cellbridges with thread inlets for the balancer cables. Quality of metal work looks good. Parts are fitting perfect together. Easy to assemble.
@eelbatteryofficial21 күн бұрын
Thanks for your feedback. Our JK Box is a new model and does not have a manual yet, we put the instruction video first, and we will have it updated on our website very soon. -About 4AWG,we have tested them for sure it can easily pass 300A,and each 7AWG cable can easily pass 200A. -Screws for compression plate are too short Please make sure you are using the right one. -About the PCB board design, we will find a better way to avoid short and more safety to use. -The cables of the temp sensors are too short to thermal glue them on the alloy of the cells: We still recommend you fasten the sensor on the busbars to collect the data more specifically. Anyway, thanks for your suggestions, and this product will be better in the future.🤝
@Juergen_Miessmer20 күн бұрын
@@eelbatteryofficial Wich size of screws do you think are the right one? There were no other screws in the box, only the ones that are too short to catch the thread. They only fit, if the foam and epoxy plates between the cells are omited. How long did you tested the cables with continues current? Wich temperature did they reach ?
@mosfetkiller385113 күн бұрын
@@Juergen_Miessmer well no answer from eel is a answer too. thank you for your review.
@angyp744 күн бұрын
@Juergen_Miessmer I have one of these boxes also and I couldn't agree more with all of your comments. The small cables are just junk to much loss at high current. I am planning to build some new cables out of dual 25 mm2 for the negative and 50 mm2 for the positive. One of my balancer PCBs came with damaged pins and a dry joint.
@user-fv6tf2ef2b2 күн бұрын
Hello ! I order the 12V box for my vehicle.i want to buy and this 48V with jk bms .are you satisfied this 4 months ? It cost about 650 euro for Greece .is it a good product or you can recommend me another company diy box with jk bms ? Thanks 😊😊