I can see a few people are confused so firstly I apologise. The game store had tried to repair it themselves and weren’t able to, they offered to sell me the console so I could fix it and sell it on.
@thadofalltrades8 ай бұрын
I replaced a thumb stick on an Xbox One controller last night. First ever time using a soldering iron. Went really well.
@Darksydakiller8 ай бұрын
You got this! I haven't even watched the video. But you for sure got this!!
@JoeyDoesTech8 ай бұрын
Darksy, thank you as always ❤
@TheSkaldenmettrunk8 ай бұрын
It always amazes me how far you have come. I remember your first videos and thus is totally different. Great job!
@seguramlk8 ай бұрын
Awesome job, Joey. That kind of meticulous work is NO JOKE. Hats off
@adriannp.8 ай бұрын
16:00 Very good Advice Joey, and nice "wild" repair. GG 🎉
@MegaHellstrike8 ай бұрын
16:00 You're god damn right you make it look easy! You inspired me to try and fix my Logitech G502 mouse by soldering in new switches, a process that I have ROYALLY messed up because soldering (or rather desoldering) is much harder than it seems haha Might try it again some day, but at least my soldering skills were good enough to solder on new fans for PC power supplies when I was flipping cheap gaming PCs
@colinboneham73878 ай бұрын
When you said a massive Shout out for today sponsor I thought for a split second thought you were going to name drop the shop that sold it you…..haha
@logothaironsides29428 ай бұрын
I love that tip with the flux braid.
@Lazyman19758 ай бұрын
Ive found if you can fit your wire inside the via it is easier to solder as it stays in place better. Years of drinking made me not super stable but I don't drink anymore. I teach myself better ways. Ive definitely learned something as I would have never thought of using solder wick for new mounting pads... Thank you.
@pedareloadedАй бұрын
Good work. But as a quick reminder, the Ground Pin on the connector is the actual electrical ground connection. Those two pads at the side of the connector are only mechanical and have no electrical connection to any pins inside the connector. So you can actually getting away with soldering the electrical pads of the connector and glue it on the board, but if you just solder the tabs on the side the fan will have no ground connection and wont work.
@Roy_C48 ай бұрын
why does a wire appear at 7:22 on the via as you cut that second trace lol....
@highroyds8 ай бұрын
I think I speak for a lot of people who follow you, that you are an inspiration to us all. I will also say that we get a lot of members in the discord saying 'sorry for asking a stupid question' But there are never stupid questions when you're learning. If you don't ask, you wont find out... members in the discord are ALWAYS happy to help, so if you need advice, join Joeys Discord - link is in the description !!
@JoeyDoesTech8 ай бұрын
Appreciate you Roy 😊
@NeXXyD8 ай бұрын
Great fix! Love the creativity to fix the solder pads =D
@AtSFG8 ай бұрын
Gotta love Joeys encouragement for people to keep on trying to get things fixed even when it goes wrong.. Just gonna say Y09..
@wesley0711778 ай бұрын
Hey Joey. I find using 0.5 or 0.35 solder balls does the trick with via's. Just a little flux and hot air, soldering iron is too big 👍. Keep up the good work.
@danielhulan30583 ай бұрын
Solder braid as a ground pad.... genius!
@ajaks76368 ай бұрын
Great Repair and Video! Thank You. 😀
@retroflipper8 ай бұрын
Great skills. I’ve learn a lot of techniques from watching your videos.
@edlowry18 ай бұрын
Great work ,very interesting method too. You should show how small these pads are without the microscope so people don't try this at home 😂
@fredericmeunier79888 ай бұрын
Awesome! Great job Joey!
@UrbanCha0s8 ай бұрын
@joeyDoesTech - I've only just started playing with soldering and removing SMD components. I removed a few Samsung IC Chips from a donor GC I had. But just before I was able to remove them from the board I heard a pop noise. Does this mean the chip is ruined now? I using a Atten ST-862D heat gun, what is the best Temp & Air flow?
@davidh11878 ай бұрын
It worries me that both power and data pin wires on the fan trace fix extended over the top of the ground plane - a future short waiting to happen....
@krtgiroto8 ай бұрын
Great job Joey.
@KorAllRBare8 ай бұрын
*TIP* With Via's you can pass a wire through, if the wire don't fit connect a short length of wire to a mini drill and pinch the wire end at an angle to make a point and place point into the Via and slowly screw it through "using the inertia of the drill" to the other side and enough to solder it down on the other side. *WARNING* This will only work for Via's going completely through to the other side.. APU👁👍
@mrfr0g20078 ай бұрын
Well done!
@pugmandan2158 ай бұрын
Joey, I have a HDMI splitter I purchased off Aliexpress that I am no longer using and strips HDCP from HDMI. It is yours for free if it would help you?
@mdz_01518 ай бұрын
Great fix Joe 👍👍
@tommiekebab19298 ай бұрын
Well joey, this was your masterpiece.
@BigBaddaBoom8 ай бұрын
Excellent video, yet again.
@DavidMadeira298 ай бұрын
I don't think that Honda would make that big difference from where we started going wrong with the sandbox story. Namastè.
@BigBaddaBoom8 ай бұрын
I heard there is a charity stream this weekend and that you will be wearing a bunny suit for the occasion.
@ferry96358 ай бұрын
Can't you also try to sell locally or on other websites? Anything to reduce Ebay Fees? Just list on both and if it sells faster on something else.. remove the fees. Or make your own website with repaired consoles.
@jonathannovak1328 ай бұрын
Sally is looking happy lol
@homsey20118 ай бұрын
They asked you to fix it but you payed 75 for it? That makes no sense lol
@IPlayVidyaGames8 ай бұрын
Wouldn't make a catchy click worthy title
@tylorpwnsall8 ай бұрын
Is this something you really can’t understand? They know he fixes it them on KZbin so they asked him to buy it from them and fix it so they can see how to fix that mistake themselves in the future.
@logothaironsides29428 ай бұрын
When he said that at the beginning I thought they meant, buy it for 75 for the parts if its unfixable, if you mend it, they buy it back.. However at the end he sounds like he will sell it himself, either way he wins.
@shaunmorrissey73138 ай бұрын
@@tylorpwnsall clearly you don't
@Lazyman19758 ай бұрын
The tech's that tried are not tech's. Ive broken things but always managed to repair. I rarely break things now from learning. My recent repairs were a micro usb port, and a computer power supply. Working on 2 Xbox ones and a couple different ds from Nintendo atm. Hdmi ports are fun to me.
@LeoThompson-ek6zu8 ай бұрын
Another great vid bunnyboy.
@154_C48 ай бұрын
sell on vinted 0 percent fee and buyer pays shipping
@wrcaruci8 ай бұрын
The repair shop offered to sell him a PS5 they couldn't fix to him for $75. They thought he could try fixing it for content on his channel, I think it helps the shop by clearing out irreparable stock. I don’t understand you people that say how can the shop offers the ps5 to him and asked him to pay for it just $75. It is a win-win deal.
@Samsemillya8 ай бұрын
When it comes to redoing traces, Toltec merc is still the goat 🐐. But you did fine joey
@jonathanmartin33758 ай бұрын
I'm confused. Why does this go into Sally's spreadsheet if you're fixing it for a game store? Wouldn't it just go back to the customer?
@JamieMcJammyd228 ай бұрын
He said he paid £75 for it, I'm assuming they messed it up and reached out to Joey.
@jonathanmartin33758 ай бұрын
@@JamieMcJammyd22 Good shout, I totally missed that part. Thanks!
@robertregister21728 ай бұрын
The fact that a business trusted you with a console just proves how good you are at what you do
@unknownguy64028 ай бұрын
What the hell was this store doing to try and fix this board? It looks an absolute mess!
@colinboneham73878 ай бұрын
Winner Winner Chicken Dinner.
@JFIXX18 ай бұрын
Better than factory !
@frankiehensley29288 ай бұрын
Here's the $64.000 question why was it opened in the 1st place? To warrant 2 broken connectors..🤔🤔🤔
@jarnobot8 ай бұрын
It's normal and even recommended to open up computers/most modern consoles for cleaning (and replacing thermal paste if applicable), so my guess is cleaning
@tiggydorset90418 ай бұрын
A quality fix
@codenamev56598 ай бұрын
@JoeyDoesTech So according to you, it felt good going in :) ,ha ha ,nice video Joey, keep those videos coming :)
@SnipesXxX8 ай бұрын
Probably asked him to fix it and he just ended up buying it.
@CaptSpeirsB7448 ай бұрын
Congratulations fixing a butchered PS5. They need to fire the gorilla there that works on consoles.