This PS5 was DROPPED | Can I FIX It?

  Рет қаралды 172,334

StezStix Fix?

StezStix Fix?

Күн бұрын

Пікірлер: 528
@jasonpatterson8091
@jasonpatterson8091 8 ай бұрын
Loved the "Do you want a playstation 5?" "Yes, please," moment.
@joeh5315
@joeh5315 8 ай бұрын
The speed of the reply was as fast as the dialogue in Gilmore girls
@3DJapan
@3DJapan 8 ай бұрын
So polite.
@SaitoGray
@SaitoGray 8 ай бұрын
I've melted at that.
@kyorin6526
@kyorin6526 8 ай бұрын
Yes, nice polite young lady 👍🙂
@3nz0m4trix
@3nz0m4trix 8 ай бұрын
Accurate ​@@joeh5315
@DthBakesh
@DthBakesh 8 ай бұрын
That "yes, please!" was the most adorable thing I heard in a week. You're the best dad, Steve, bless ya and ya family
@Elyndyr
@Elyndyr 8 ай бұрын
That's a really cool present for your daughter. You're awesome
@Trippy86117
@Trippy86117 8 ай бұрын
The fact you got a faulty ps5 from Ebay with a genuine honest description is incredibly rare. Congrats
@GeoJad
@GeoJad 8 ай бұрын
not to brag but i got a ps5 disk and series dirt cheap with hdmi port damage and only that and fixed them both and been running for a year now. maybe luck
@Trippy86117
@Trippy86117 8 ай бұрын
@@GeoJad very fortunate
@coreyblakee332
@coreyblakee332 4 ай бұрын
Mate my ps5 turns of after about 30 mins of playing a ps5 game I’ve cleaned the inside but I haven’t gone further and done the psu or whatever it’s called
@Trippy86117
@Trippy86117 4 ай бұрын
​@coreyblakee332 chances are the heatsink is full of dust If you have it standing upwards could also be a dry spot on the APU.
@coreyblakee332
@coreyblakee332 4 ай бұрын
@@Trippy86117 I have had it upwards since I got it I’ve had it since release pretty much but yeah it’s defo fucked need to try get it repaired I’m waiting for the ps5 pro and will purchase that lol 😂
@whollymindless
@whollymindless 8 ай бұрын
"Yes, please" too cute.
@johnwilliams2646
@johnwilliams2646 8 ай бұрын
"Yes Please", What's it like being the best Dad in the world? Love it.
@RyanMercer
@RyanMercer 8 ай бұрын
What even happened inside that thing, a rave?!
@keithhayter7791
@keithhayter7791 8 ай бұрын
Steve just watched your latest vid on your 2nd only ps5....just a little bit of advice nxt time and from now on you should put it in to safe mode b4 opening...luv ya vids and comedy keep going strong and SOLID...LOL
@ThumpertTheFascistCottontail
@ThumpertTheFascistCottontail 8 ай бұрын
weirdest gender reveal yet.
@RyanMercer
@RyanMercer 8 ай бұрын
@@ThumpertTheFascistCottontail 😂 😂 😂
@mikeytappe
@mikeytappe 8 ай бұрын
My guess, foam party
@Nobe_Oddy
@Nobe_Oddy 8 ай бұрын
@@keithhayter7791 AND he should put back ALL FOUR screws in the pressure plate 🤦‍♂ - I wonder how long it's gonna take for him to fix THIS little mistake?? smh
@shammon1
@shammon1 8 ай бұрын
I learn from this channel I've ended up fixing stuff broken in the house that would have been binned thanks keep them coming.
@jetjazz05
@jetjazz05 8 ай бұрын
15:38 - best repair video I've ever seen. I hope she gets as much joy from this repair as I have!!!!!!
@jimgallaher458
@jimgallaher458 8 ай бұрын
Another great video, since I retired as an electrical maintenance engineer of 45 years I find it strangely relaxing to watch someone else pull electronics apart and repair them, keep up the good work, my blood pressure thanks you 😗
@MrCode4money
@MrCode4money 8 ай бұрын
2:31 "I don't understand how people do this to their consoles". As a father one word: kids. Tbf the party balloon stuck to the inside of cover is a dead give away.
@paszTube
@paszTube 8 ай бұрын
2:10 there clearly was a kids birthday party inside this machine
@StezStixFix
@StezStixFix 8 ай бұрын
😂 must have been!
@MrCode4money
@MrCode4money 8 ай бұрын
I'm wondering if it was a birthday present that never made it past the party. As Steve mentions it's factory reset right at the end.
@f1zzdux
@f1zzdux 8 ай бұрын
​@MrCode4money perhaps but the amount of dust on the fan would suggest otherwise
@MrCode4money
@MrCode4money 8 ай бұрын
@@f1zzdux yeah good point. Interesting.
@paszTube
@paszTube 8 ай бұрын
@@f1zzdux OK it was a kids party but the party was held inside a tumble dryer lint catcher. It's simply deduction, really.
@DopeShow
@DopeShow 8 ай бұрын
I’m amazed over how the sweets and balloon actually even could * mimicking Steve* Get in there! Job well done, my good sir! And what a great gift to your daughter! Cheers from Sweden!
@I_Don_t_want_a_handle
@I_Don_t_want_a_handle 7 ай бұрын
Sucked in by the fan?
@keironcornell9396
@keironcornell9396 8 ай бұрын
I love the black dots next to the relevant screw holes. Genius idea!
@AdirColonnaofficial
@AdirColonnaofficial 8 ай бұрын
Your daughter sounds like a good kid and you're an awesome dad
@StilgarAstartes
@StilgarAstartes 8 ай бұрын
Well done! Your Daughter will be pleased! :D I'm totally stealing the Term "Devil's Juice" for Liquid Metal now, by the way!
@alfonsogrondo
@alfonsogrondo 8 ай бұрын
Steve, your "leaded & unleaded mix" comment gave me a flashback to the mid 1990's when I half filled a friend's 1985 Fiat Panda with unleaded petrol by mistake, then switched realising it should have been leaded. She got rid of the car not long afterwards. Great video as always 👏
@matthewbowers88
@matthewbowers88 8 ай бұрын
I've learnt so much from this channel. Right now I'm on with fixing a jet wash. I've fixed one of those bins with a motion sensor. I've replaced a phone screen. I'm on the lookout for a KitchenAid mixer. It's not the fix, it's the confidence of let's have a go. I haven't been able to get a cheapo console but I've got the spare ports ready for when I do.
@seansolorc
@seansolorc 8 ай бұрын
Looks like the Gremlins had themselves a good party between the case and the system. Balloons, sweets and the like.
@StezStixFix
@StezStixFix 8 ай бұрын
Still have no idea how a balloon got under there! Really strange! 😅
@clok1966
@clok1966 8 ай бұрын
@@StezStixFix Ballon, white powder-like substance.. don't like your fingers, though i am sure you won't after seeing inside there..
@KingKool2099
@KingKool2099 8 ай бұрын
WELL, I didn't expect to see THAT inside there.
@ScottMadeAThing
@ScottMadeAThing 8 ай бұрын
This is my favourite StezStix Fix? video, 8 can't tell why but it's spot on! So funny, we all know the response you were hoping for (as anyone watching would too) and then 'yes please.' 😂 bless her she was probably thinking 'is this a real offer? Play it cool, play it cool' 😂
@StezStixFix
@StezStixFix 8 ай бұрын
😂 yeah, it wasn't the reaction I was hoping for! 😅 maybe she didn't believe me 😅
@takashiemota9784
@takashiemota9784 8 ай бұрын
The balloon hidden in the PS5 was most likely a container for contraband. Please be careful Steve Amazing videos as always
@samuraidriver4x4
@samuraidriver4x4 8 ай бұрын
My thoughts exactly, very common spot to stash stuff in.
@Fatbaldbob
@Fatbaldbob 2 ай бұрын
Tried this fix myself today…top tip when you tin the port connections you only need a tiny, tiny, tiny amount of solder!! Burnt my finger also…and there really is a million screws 🤦‍♂️ This video helped a lot though, thank you 👍
@Dtr146
@Dtr146 8 ай бұрын
I took apart a PS5 that was overheating. Man you got to have the ability to organize your workspace with taking one of these apart. Different length screws with different thread pitches. It sucks
@ChrisTallant
@ChrisTallant 8 ай бұрын
This was an awesome episode, and I'm sure she's gonna love that console! Ironically, one of my twins loves watching this channel and has started to take things apart to fix them. However I can't get him to put things back together yet...
@DarioDarrow
@DarioDarrow 8 ай бұрын
2:30 I've never cleaned any console I've owned, but then I've never had to. I have no idea how people get them so dirty 🤷‍♂
@drawnSHORT
@drawnSHORT 8 ай бұрын
Them balloons get everywhere. Love this channel. Proper internet. Ta Steve.
@rob6890
@rob6890 Ай бұрын
New to your channel, but can’t get enough of them. Great content, and very sweet daughter response. You make the incredibly complicated seem very simple!
@adamlannerd1408
@adamlannerd1408 8 ай бұрын
Steve never fails to crack me up. Thanks bud.
@alananderson6477
@alananderson6477 8 ай бұрын
Thanks
@Can3Fix
@Can3Fix 8 ай бұрын
I do the same thing, only my daughter is much younger, so the enthusiasm was greater, priceless.
@kendexter
@kendexter 8 ай бұрын
Nice work.. i had a console repair shop . LOL,,i found candy as well and lego bricks etc inside several times when complaining their ps2 would not load disc. changed a lot of lasers and chipped all ps2 series . and same back in the VHS time so many toys and items inside to find
@davec2211
@davec2211 8 ай бұрын
That HDMI solder went back like magic!
@MickeyM-yg9ty
@MickeyM-yg9ty Ай бұрын
Really enjoy watching this fella, Steve! Great sense of humour, entertaining, gentle manner, good at his job. Would be interested to know his training and his real-life work, and maybe a run-down of all the tools he's got, and so on! Come on Steve, you're a youtube celeb with nearly 200,000 subscribers, so tell us a bit more about yourself!
@RROOBBWWAANN
@RROOBBWWAANN 8 ай бұрын
15:39 YES PLEASE.
@JonnyFix
@JonnyFix 8 ай бұрын
I do like the little screen you used, what a great idea if you're pushed for space!
@jonahweinshenker
@jonahweinshenker 8 ай бұрын
Nice! I love all your videos. But it’s particularly cool to see you get a PS5 up and running. Great work as always, sir.
@infin1ty850
@infin1ty850 8 ай бұрын
Definitely a device that one of those handheld electric screwdrivers would be justified for if you were having to repair these all the time.
@StezStixFix
@StezStixFix 8 ай бұрын
Yeah, I do have a Bosch one somewhere, but I need to get some T security bits for it! 😊
@reesmundin5619
@reesmundin5619 8 ай бұрын
Love your vids steve. Liquid metal-cotton bud soaked in ipa. Use it to group together the liquid metal, suck it up with a syringe. On both the die and heatsink. Then you can see the full extent of the oxidisation. Clean that off with a fresh cotton swab and ipa. If the oxidisation is too bad to remove with that i use 6000 grit sandpaper to remove the rest. Re apply the original liquid metal and respread it on both the die and heatsink. Job done. Hope that helps
@kenny9648
@kenny9648 8 ай бұрын
You & Vince are my two favorite channels here on YT. Thx for the entertainment, Steve.
2 ай бұрын
Good job on the repairs,most people don't have the knowledge of equipment you have 🎉
@ipaddy
@ipaddy 8 ай бұрын
Really enjoyed this fix and your daughters reaction lol to stop the Vince moments just tw sticky backed magnets under the cup and on the tray job done lots of painters do this to help stopping the turps going everywhere on the work table
@stevegardner7027
@stevegardner7027 8 ай бұрын
Well done, another successful fix, more importantly, earning dad bonus points. Top man.
@LurgsHowToGuides
@LurgsHowToGuides 8 ай бұрын
I think you should call the liquid metal paste the T-1000
@MikeB_UK
@MikeB_UK 8 ай бұрын
Love all your fix it vids. You have come a long way. May I suggest you buy one of those small plastic squeezy bottles with a thin metal tube on for your IPA. Saves keep knocking the cap over! You can also get ones a bit like ink wells that have a press down top for soaking a cotton bud in. Again, saves keep knocking.... you get the idea :). Keep up the great work.
@MarcusCroy
@MarcusCroy 8 ай бұрын
Congratulations on the repair job. She's going to get a lot of fun out of that:-)
@lcizzlelc
@lcizzlelc 8 ай бұрын
Good job. As for blowing out the fan like that. You can destroy fan pretty easily cleaning it like that. Should put your finger or something in it to prevent it from spinning and then spray. :/
@LozzTheDev
@LozzTheDev 7 ай бұрын
Fun doing HDMI connectors! I additionally normally wick the anchor points so they are clear of solder, place the new connector on, apply los of flux, push down and solder pins. Once you're happy connector is on level and pins married up and soldered, solder the anchor points ;-)
@thewildcampolians
@thewildcampolians 8 ай бұрын
Hi Steve, I'm a recent subscriber and I've binge watched about 30 of your videos in a row. Great channel, lovely bit of entertainment and vicariously living through your electronic-fixing wins. The rap and the music are lovely added bonuses. Keep up the great work from Matt in Bristol.
@PaulMawdsley68
@PaulMawdsley68 8 ай бұрын
Excellent work fella! I really recommend not spinning the fans up with compressed air or a blower / hoover - fun as it is (both for cats and dudes), they can self destruct at the speeds that generates!
@dewalddebruyn4028
@dewalddebruyn4028 8 ай бұрын
I certainly hope you didn't allow me to cyberbully you about your music. You shouldn't let the internet dictate your life, bruv. I really do enjoy your content and have already learned quite a bit from your fault tracing procedures etc. I'm South African, I also enjoy tinkering with electronics. I almost gave up after seeing how small components started getting, then you showed up on my youtube with your microscope. They cost about £50 here, definitely getting one A.S.A.P. Anyway keep up the good work, have a good evening, cheers.
@carlmiles8948
@carlmiles8948 4 ай бұрын
Great video.. It is really great to hear the word solder...not sodder
@zKaltern
@zKaltern 8 ай бұрын
I used to work for PSN Hardware Support. The number of calls I had about damaged HDMI sockets was quite impressive. I don't know exactly why, but they DO seem to be unusually delicate. I mean HDMI sockets in general are terrible, but the PS5 ones seemed to be quite easy to damage. I think a lot of it would be eager hand fumbling around the back of the console and trying to shove the plug in without looking... but still. Anyway good repair, maybe get some d-Brand plates for the case if it's a little scuffed? :D
@StezStixFix
@StezStixFix 8 ай бұрын
Good shout on the plates! Yeah, the PS5 ports seem to fail way more often than the Xbox counterpart! 😮
@yotoprules9361
@yotoprules9361 3 ай бұрын
According to TheCod3r, who repairs these all the time, the early revisions used a very weak HDMI port, and they use a much stronger port in later revisions.
@secretbaseinvestigations7039
@secretbaseinvestigations7039 8 ай бұрын
Is there any chance of detailing the iron/hot station temps & roughly how long you’re blowing for (depends on the man, Madame…), in the descriptions? For those of us who do this sort of hobby rarely, it’s a help. Keep up the good stuff!
@stevevanrusselt4739
@stevevanrusselt4739 8 ай бұрын
Nice Keter Shed mate! I have the larger version, because I live in Nantwich.
@mottzilla4858
@mottzilla4858 8 ай бұрын
11:10 I've heard it's not a good idea to blow air into fans and let them spin drastically faster than they normally would spin. It's bad for the bearings in the fan I believe. Nice repair! The balloon is such a mystery.
@chanyphilly8266
@chanyphilly8266 8 ай бұрын
Brilliant Steve. So happy your daughter got an unexpected present!
@salvatoreamico5391
@salvatoreamico5391 Ай бұрын
So interesting to see you working.
@macorourke2222
@macorourke2222 8 ай бұрын
Most excellent Brother! Thanks for sharing Your passion and adventures from Toronto Ontario Canada 😎👍♥️✨️✨️✨️✨️✨️📺🕹🔊🎶🎶🎶🔊🎶🎶🎶✨️💯💯💯💯💯
@chrisj2848
@chrisj2848 8 ай бұрын
Awesome Steve! Obviously we have no idea if it works or not! 👍
@StezStixFix
@StezStixFix 8 ай бұрын
😂😂
@TechCommanderRepairs
@TechCommanderRepairs 8 ай бұрын
cotton swab and 91 - 99% is isopropyl alcohol to clean up the oxidation from the liquid on the APU and heatsink. The use the dry side to rub the same liquid metal back on the system. Sony provides more than enough on the the PS5. Great job though. Loved the video
@Wanton110
@Wanton110 8 ай бұрын
I have 2 solder fume extractors, one of the big..ish.. ones and a small one with a hose.. I use the hose one for actual solder fumes and the big one for dust
@DzeiEidz
@DzeiEidz 8 ай бұрын
Proper fan cleaning = vacuum cleaner and a brush. And as a bonus you don't inhale all those nasty particles.
@Georgesanderson1965
@Georgesanderson1965 8 ай бұрын
Hi Steve, nice video as usual. I’m curious about the monitor you’re using in the video. It looks really handy. What brand is it and where did you buy it? Greetings from Holland. Yours sincerely, George.
@mrkthmn
@mrkthmn 8 ай бұрын
Came to the comments wondering this same thing!
@ReelFilm2016
@ReelFilm2016 8 ай бұрын
Finding a water bomb type balloon inside a PS5 is possibly the strangest and funniest thing I have seen in some time. Even if the system had been broken, what a great story you would have had to tell. 😂😂
@dannyandrews8930
@dannyandrews8930 8 ай бұрын
Low melt solder for the big earth pins before heat gun.
@craiggilchrist4223
@craiggilchrist4223 8 ай бұрын
Who else likes the video before watching knowing it's gonna be a good vid?
@jonogrimmer6013
@jonogrimmer6013 8 ай бұрын
Always a good watch but particularly enjoyed this one, song, fix and spoiler on point!
@statementmark2131
@statementmark2131 8 ай бұрын
The feeling of fixing something is priceless 😂 f*cking awesome ! Subscribed!!!
@Johadart
@Johadart 8 ай бұрын
Very beautiful manners from your daughter, do you want a ps5, “yes Please”, awesomeness right there, and you didn’t melt no plastic”55” days wow, going for a world record here.. keep up the great work mate, never stop being you, and keep them raps coming, very talented. 🤙🏼🇦🇺 Joe from Australia 🤙🏼🇦🇺
@daves1412
@daves1412 7 ай бұрын
Lol excellent, good faces, great craftsmanship. Please consider rewilding your garden? Hedgehog shaped holes in fence, trees, small wildlife pool, shrubbery, wild flowers, etc. Up to you of course!
@TheMadSqu
@TheMadSqu 8 ай бұрын
That rap was really dope my friend! And congratulations for getting a relatively cheap PS5!
@n4_ku
@n4_ku 8 ай бұрын
You have to scrub the dry spot from the APU die and the heat sink until you can easily spread liquid metal on them, not just cover them up.
@wisher21uk
@wisher21uk 8 ай бұрын
Nice repair mate many thanks 😊
@CrashFan03
@CrashFan03 8 ай бұрын
i like how steve, joey and steve tronicsfix all made videos on fixing ps5s within a day of each other
@FixitRetro
@FixitRetro 8 ай бұрын
Love your videos! Glad to see you got that thing working! Also, love all the custom tracks lol!
@MrCode4money
@MrCode4money 8 ай бұрын
6:58 My guess why it took a while to get the port free would be the massive ground plane that's surrounding it is probably acting like a heat sink.
@Okurka.
@Okurka. 8 ай бұрын
Thanks, Captain Obvious.
@MrCode4money
@MrCode4money 8 ай бұрын
@@Okurka. not obvious to everyone clearly. I guess when you know, you know.
@UpToNoGood83
@UpToNoGood83 8 ай бұрын
Super Awesome Video! Keep up the Great work!
@StezStixFix
@StezStixFix 8 ай бұрын
Thanks UTNG! ❤
@CeremoniusX
@CeremoniusX 8 ай бұрын
Sometimes you just don't wanna know what people are doing to their electronics. A balloon inside a PS5 👀
@snuffsound451
@snuffsound451 8 ай бұрын
I love your channel! It has inspired me to try and repair old stuff myself. I have no idea what i´m doing, but i´m having a ton of fun
@jamesb1717
@jamesb1717 8 ай бұрын
The Cat looks concerned.
@Joshua_Bee
@Joshua_Bee 3 ай бұрын
As a father of daughters, I thought that was a very sweet moment.Cheers ❤
@ibrahimkocaalioglu
@ibrahimkocaalioglu 8 ай бұрын
it is your best hdmi fix so far. ❤
@wzzupp548
@wzzupp548 8 ай бұрын
Don't let fan blades spin while cleaning/dusting them, normally theis matters most of the fan is still plugged in, as to not create voltage in the system it's plugged into, but even while not plugged in it also places abnormal stress on the motor for the fan
@blueskies792
@blueskies792 8 ай бұрын
@11:15 Oh Steve dont destroy that fan! Its a generator when spinning like that.
@TheStonedSpidR
@TheStonedSpidR 8 ай бұрын
dont ever let the toxic trolls get to you, youre awesome just the way you are. i love your vids.also youre supposed to use the special qtip that comes with the liquid metal. i think the qtip will leave cotton threads
@BGPhilbin
@BGPhilbin 7 ай бұрын
Steve, please, please get yourself a filtration unit for the room in which you work. If, for no other reason, to ensure that there's less dust, but also so that the smoke, etc., that sometimes results from your projects has much less chance to build up in your respiratory system (along with the dust). As someone whose dad worked as a fireman, I can tell you that it's just as important to have protective equipment like filters as it is to perform the job. We all want you to take care of yourself!
@MizuhoChan
@MizuhoChan 8 ай бұрын
Also, you don't need to mark the screws with sharpie, they're already marked on the shield, anywhere you see -O-, you don't put a screw.
@StezStixFix
@StezStixFix 8 ай бұрын
Ah, thanks for the tip!
@MizuhoChan
@MizuhoChan 8 ай бұрын
@@StezStixFix Sorry, I was rude, having a bad day, but it was very well soldered, congrats :)
@thesharpe49
@thesharpe49 8 ай бұрын
it's recommended to avoid spinning the fan blades with the force of the air duster to avoid bearing damage.
@brandonwills1919
@brandonwills1919 8 ай бұрын
Have you possibly thought about soldering tweezers?
@tonybrown7408
@tonybrown7408 8 ай бұрын
Ive been binge watching your content recently ....... ( it's very soothing background) if you fix it will you sell it .... what would your price be to a retired (i.e. 66 year old) who fancies owning his first console to connect to his new tv !! .... either way 'peace' ....... and have fun btw we still need to have ... 'Constant Nudity', instead of 'Continuity'
@Eric_G65
@Eric_G65 8 ай бұрын
Steve, a few things that other people probably mentioned. I think you removed the port upside down. Steve at Tronicsfix always turns the board the other way and lets the port fall out. When you clean the fan, you should never allow the fan to spin with compressed air because you can overdrive the fan and potentially damage the bearings or even damage the control board. You also put way too much liquid metal on the APU. Also, why don't you use a power screwdriver, you can get pretty decent ones from Temu or Aliexpress. Your wrist must kill after this kind of repair.
@yotoprules9361
@yotoprules9361 3 ай бұрын
I don't think it matter, Phil at TheCod3r does it the same way Steve did and he repairs these for a living. As long as the solder is liquified you shouldn't damage anything
@ninatheambulancecamper
@ninatheambulancecamper 8 ай бұрын
I’m wondering if they had a PSVR2 headset with it to factory reset it ? That plugs in the usb in the front panel. Maybe the says why it got pulled off the surface it was on and caused the drop ? The usb would have pulled out easily, hdmi plugs are quite tight fitting.
@alistairmacneil621
@alistairmacneil621 8 ай бұрын
Cracking fix Steve.
@frankiehensley2928
@frankiehensley2928 8 ай бұрын
Hey you got this, the force is strong with this one
@Cleanbob503
@Cleanbob503 4 ай бұрын
Bro your patron bars are hard really really love this channel ❤
@Abauto84
@Abauto84 8 ай бұрын
I absolutely love the music you have used in this video could you give me a link to it please Steve
@mintpalmer
@mintpalmer 8 ай бұрын
Dunno if you'd be interested Steve, but I've got a launch model PS3 with the YLOD that needs repair. I'd be happy to send it to you. It's currently languishing away in storage.
@michaelgroob3760
@michaelgroob3760 8 ай бұрын
You have my favourite fixit show!
@samwilliamson_74
@samwilliamson_74 8 ай бұрын
13:36 ...very nice poker face, steve... Was totally stumped as to if you managed to get it working.. 😄
I Bought a FAULTY Original XBOX Crystal | Can I FIX It?
18:12
StezStix Fix?
Рет қаралды 224 М.
I Paid £250 For a Faulty XBOX Series X | Can I FIX It?
18:39
StezStix Fix?
Рет қаралды 168 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
FAULTY A500 Mini | Can I FIX It?
16:30
StezStix Fix?
Рет қаралды 158 М.
This OG XBOX Won't Turn On | Let's Try and FIX it!
19:55
StezStix Fix?
Рет қаралды 325 М.
Why are they always water damaged? | Switch LITE trying to FIX
24:11
StezStix Fix?
Рет қаралды 131 М.
This EVERCADE VS Freezes on the BOOT SCREEN | Can I FIX It?
24:00
StezStix Fix?
Рет қаралды 298 М.
This Pandora BOX doesn't work! | Can I FIX It?
26:19
StezStix Fix?
Рет қаралды 111 М.
£180 BOSCH Laser Level FAULTY | Can I FIX It?
25:38
StezStix Fix?
Рет қаралды 194 М.
Street NINJA with Garbled Screen | Can I FIX It?
13:39
StezStix Fix?
Рет қаралды 83 М.
Trying To FIX a PSone | No Display & No Disc Spin!
22:19
StezStix Fix?
Рет қаралды 259 М.
FAULTY Game Boy COLOR from eBay | Can I FIX It?
31:03
StezStix Fix?
Рет қаралды 197 М.
I Bought 2 FAULTY SNES Consoles | Can I FIX Them?!
15:27
StezStix Fix?
Рет қаралды 208 М.