Blender Hard Surface Modeling Tutorial

Blender Hard Surface Modeling Tutorial - Curvy/Organic Shapes

Рет қаралды 78,075

Күн бұрын

Пікірлер: 69

@SuperLongfield 2 жыл бұрын

Every six months or so I pop up on your KZbin channel, I try one of your 20-min. hard-ops tutorials and all of sudden my modelling skills take a giant leap... Thanks for sharing all this

@JoshGambrell 2 жыл бұрын

Happy to help!!

@kevinpage 2 жыл бұрын

Thank you! Another little Proportinal Editing tip is hold Shift while scrolling to get an even finer adjustment on the circle (just as you can in other functions, moving, scaling, dragging within editable attribute fields, etc.)

@beaustine6093 11 ай бұрын

That delete the faces so you can maintain topology trick was a game changer. Thank you for this tutorial! :) So many other great tips as well.

@maximlukin2745 2 жыл бұрын

Wow! Great technique showed in the end of the video. Thank you👍

@choud-cc 2 жыл бұрын

i've only watched a few of your videos but man, it has improved my workflow 1000 times. Excellent Content man! def subscribed :)

@JoshGambrell 2 жыл бұрын

Thanks a lot bro. Happy to help :)

@BestMods168 2 жыл бұрын

Thank you for this tutorial. I am now able to better control the edge flow of my models. I was using extra edge loops before to get that sharp edge and finalizing the shape after applying the multi res.

@BillGeorge-x6q Жыл бұрын

Wow! Very cool! I'm a total newb to blender and this is fantastic. Thank you so much.

@tim_arterbury 2 жыл бұрын

Thank you so much for your tutorials! I always felt so in the dark about how to model this kind of stuff in Blender, but now I’m slowly getting the hang of it. Thank you again!

@AyushB3D 10 ай бұрын

Ive just made a naked superbike fuel tank following along with the tutorial. Thanks Josh. Shit was impossible for me 20 minutes ago but now itss a lot possible.

@김정민-n4j 2 жыл бұрын

GREAT as always!

@asterixus 10 ай бұрын

What settings do you recommend for your Viewport Shding? Studio or MatCap Lightning? Cavity Screen or Both? I would highly appreciate it, thanks for reading this!

@ezequi889 10 ай бұрын

how u do that symmetry stuff, its really usefull and timesaver

@cashtonbriggs2135 2 жыл бұрын

Thanks Josh. This video was so helpful. Except now, I have to destroy the seats in my curremt project (for the 3rd time) and do them correctly😁. Pleasure to watch as always. 👍

@toddspeck9415 2 жыл бұрын

So awesome. Thanks for showing this method. Always amazed at your Blender skills.

@JoshGambrell 2 жыл бұрын

Cheers Todd!

@chriz9959 6 ай бұрын

adapted this to widekit modeling. thx, its really helpful

@mrnevermind 2 жыл бұрын

Inspirational! I alway get stuck in the beginning to get a starting object going. I just realized I was so stuck in a box with non destructive approach, I’m always left with some what interesting looking box with no way to extending it. I love the flow feeling I get to start with this approach. Absolutely subbing Thank you. Not sure any of you coming from gravity sketch background but this makes more sense to me then starting with a box and Boolean ops

@pabloarduino2687 2 жыл бұрын

Awesome vid Josh! Very educational, right to the chase. Subscribed.

@rvr_axyz 5 ай бұрын

this is lowkey the mouse tutorial I was looking for

@sameeruddin 2 жыл бұрын

I was trying this out with nurbs but this is very cool.. Proportional editing

@RichellyItalo Жыл бұрын

Thank you. I need it.

@bizentino 2 жыл бұрын

Wow, good promotional video.

@velstorios9473 2 жыл бұрын

2 days ago I saw that nurbs modeling is the most suitable way for curvy hard surfaces, what do you think of that?

@JoshGambrell 2 жыл бұрын

Nurbs is fantastic, and will create impeccable shading. I always recommend it in conjunction with Blender if you can!

@velstorios9473 2 жыл бұрын

@@JoshGambrell So the nurbs modeling that exists in blender is insufficient? Is that why I see people modeling such shapes with SubD modeling in blender and not nurbs?

@TheBadBone23 Жыл бұрын

I'm curios, how would something like this look for 3d printing?

@DRSulik 2 жыл бұрын

How did you select all those faces? Key shorts?

@sebbosebbo9794 2 жыл бұрын

thx for these ideas...but some things questions me hard...!? how you creat these red plane bool objects ? I have installed blender 3.4 it doesnt work.. can you show how to corect extruding some edge out to build further up the model, push in some minor details in without using all the time these proportional feature.. how you even distribute the mesh after proportional Edition ? is there some modfier like in 3dsmax or option that helps..? In blender edge extrude goes strange in wild direction..in 3dsmax its shift + mouse clicks..and it works fine..not 4 5 clicks and it goes even wild... p.s. have blender edit poly modifier for non destructiv workflow or is this G.node able or have a non destructiv workflow .. sry Im new to blender..also missing or cant find edge groups to save some crease bevel or smooth groups without selecting all the time again edges... extrude manifold is also strange like this bevel you tryed with these wierd artifacts... blender is really hard to learn the manuel is so short .. helps not really ...

@raz_dva7173 2 жыл бұрын

How do you make game model from some organic model, do you use manual retopo or something else ? Thanks

@vladisslave.7500 2 жыл бұрын

Thank you very much for the video !

@김정민-n4j 2 жыл бұрын

You only used offset cut on the first boolean you made. Can you also use offset cut on the other two boolenas you have made in the video? I am asking because I can't do the second and further offset cuts.

@fedeg91 2 жыл бұрын

Hi Josh, I really appreciate your helpfuls tutorials !! I have a question . After that the faces where deleted and the subdivision modified was enabled .. how did you get the vertex edit ? ( Like in Nurbs mode )

@StormBlessedxo 10 ай бұрын

i don't have any of the black vertices 00:58 I know I'm only a minute in and I am already lost but I would love to be able to practice this stuff to get more creative. Any tips are much appreciated.

@minotaursgamezone Ай бұрын

I know you probably have this figured out eight months later but make sure you are in vertex selection mode with 1

@pb6839 2 жыл бұрын

Is the separation/slash procedure a good way for adding paneling?

@CosplayZine Жыл бұрын

There's a addon called "just paneling" that might be of interest to you. It's not free but looks like it has a lot of features if you want to check it out.

@artinrad8213 2 жыл бұрын

Thx

@revotiva 2 жыл бұрын

Nice thank u

@RhinoTimelaps Жыл бұрын

I think its easier use CAD. Boolean etc.

@starlord627 2 жыл бұрын

Why that default cube looking smooth??

@unicornrainbows8612 2 жыл бұрын

Not sure, but what I did was add a cube then added a bevel with 0.04 offset, 12 segments and it looks pretty similar to his. The one exception is that in his cube he had only the vertical edges beveled while mine would have all edges beveled. Fixable by scaling the cube on the Z axis so that the boolean looks like his (if that makes sense).

@mpod_creative 2 жыл бұрын

You proceed to Box cutter like its common part in blender, while it's paid add-on 🤨

@traditur_ Жыл бұрын

A few mowed lawns or commissioned models is no time at all compared to how much time that addon will save you.

@BlenderKnowledge Жыл бұрын

I didn't know that I could just focus on making the shape of the mesh instead of putting all my efforts into making a perfect quad-based mesh.

@BookooZenny 2 жыл бұрын

The issue with your audio sounds like a sample rate disparity between devices, but I can't be sure

@JoshGambrell 2 жыл бұрын

I think i fixed it, wrong port

@3dguy839 Жыл бұрын

I tend to struggle with eating late at night Possibly because I struggle With subs Causing anxiety Thus leading to eating

@tudoravramescu1783 2 жыл бұрын

Hello 👋

@WillFalcon 2 жыл бұрын

BOOLEAN CLEANUP freezes my computer completely

@JoshGambrell 2 жыл бұрын

Mm, cant help you with that one, try contacting machin3

@WillFalcon 2 жыл бұрын

@@JoshGambrell I know, but this is useless - it says "experimental will not support" Anyway, moving thousands of verticies is always pain in the ass... I hate hardsurface for 20 years

@JoshGambrell 2 жыл бұрын

@@WillFalcon I have zero issues. Make sure you're up to date with Blender / Mesh Machine. Otherwise, do a fresh install of Blender (uninstall and terminate files, ryuu has a tutorial on purging Blender)