Two Micro Rc Airplanes - One didn't work - Watch me fail

[@carboncubss]

That micro brushed motor was needed for the first plane. Plus that brushless did and will give massive torque roll with just the slightest of throttle. Nice job on the second plane with the correct power source. Now you could use a micro brushless like a 0802 that may have been much a better option.

[@lenny108]

Nicely done, seems the plane has to fly perfectly even without a motor. And when this is checked one can add the motor.

[@migalito1955]

You had the same luck I did with a micro receiver. The power wires broke free. I thought I had the right polarity and very carefully soldered them back in place. In the blink of an eye connecting the battery fried everything. I get my micro electronics either from Minimum RC out of China or MicroAces out of the UK.

[@Astrocosmos1]

Always supporting you

[@Joyplanes]

Thank you and all the ones that think like you.

[@sajalacharjee7008]

New look! I love it.

[@clntr1894]

the receiver was working, its just need a proper position because it has a gyro in it

[@umxair3894]

Nice video! Making a Tiger 60 completely from scratch at home 😊

[@Joyplanes]

Sounds great!

[@davecollado1333]

Failures lead to success . This is a great :)

[@egoeditz9721]

From Philippines supporting

[@lancevanvelzen4832]

Just an fyi. You can buy a whole frsky mirco setup from banggood for really cheap. It has the micro rx, servos, esc, motor, prop. And i think lipo. I can link it if youd like

[@m.s.aviation7065]

Thanks for the video joy! I love all the videos recently and I can't wait to see more coming. Also I will check out the other website for the vids

[@x-SF-x]

2:40 where can I buy a receiver ? 2:10 also where to buy a servo so small no name no weight not specified....please attach a list of parts or links to purchase them

[@Joyplanes]

I updated the description with this: Micro receiver 1 (DSM2 DSMX) www.banggood.com/custlink/vvvd9gwdih Micro receiver 1 (FrSky) www.banggood.com/custlink/DKGYZeTEig Micro receiver 1 (For FlySky) www.banggood.com/custlink/KKmy9YAMAW Micro receiver 2 www.frsky-rc.com/product/vd5m-2/ Micro servos www.banggood.com/custlink/mD3Y961EoF Motors www.banggood.com/custlink/vmDd9g7Ral (buy appropriate propellers) Batteries www.banggood.com/custlink/D3DE94TyaQ Battery charger www.banggood.com/custlink/vKvR867dOk

[@x-SF-x]

@@Joyplanes Thank you

[@thisismyyoutubename1214]

I'm working toward the same goal! I want a tiny plane to fly inside my house. Seems like 1 or 2 0802 brushless motors plus receiver, speed controllers, 2 1.7g servos, and a 300mah lipo is around 20g. Wish it were lighter still. :-(

[@stejer211]

Sorry to spoil your party but 20g is waaay to heavy for a living room flyer... you should aim for 8 to 10 grams. Parkzone Mini Vapor (8-9g): kzbin.info/www/bejne/iKmbdIFueq2qepY Parkzone Vapor (16-17g, barely makes it in extreme high alpha): kzbin.info/www/bejne/aISraa1tp7h4a9k Note that 1 gram is a huge weight difference at this size ;)

[@lavishmehta6003]

Your goin deeper Good luch buddy😅

[@Andy-df5fj]

Trying to trim a brand new build in a living room was too steep of a hill to climb.

[@gasperbucinel]

Optimist😂

[@joelspangler]

The typo in the subject line should make your next project. You accidently said tow instead of two - i think it would be awesome to tow up a micro airplane with a bigger one and then release it.

[@Joyplanes]

Thanks! I fixed it.

[@lambvnguyen9528]

you made that vid on my birth day

[@blinkingspirittheblu2088]

I,ve made the storchlike Trainer I have to learn to fly it then cross my fingers

[@blinkingspirittheblu2088]

I ve make my first ever flight today,I landed it in one piece Tnx a lot for all I hope I will build a bird of time one day

[@bruvbruvbruv6191]

Plz make a rc jet stile 3d plane

[@rousalisthanasis9084]

You probably mean two not tow!

[@Joyplanes]

Yes!

[@daviddavids2884]

i have just one thing to say. at 4:08, SERVOS do NOT go at the tail.!!!!! SERVOS do NOT go at the tail.!!!!! SERVOS do NOT go at the tail.!!!!! SERVOS do NOT go at the tail.!!!!! SERVOS do NOT go at the tail.!!!!! googletranslate

[@stejer211]

No problem if it doesn't negatively affect your center of gravity.

[@daviddavids2884]

@@stejer211 oh, really. and how often, during cg balancing, have you said to yourself, 'ya know, i really should Try to make the tail Lighter, BEFORE i make the nose extra Heavy.' in other words, if the tail of a model is heavy, there is One fix for the problem --- MAKE the tail LIGHTER.!!!!!!

[@stejer211]

@@daviddavids2884 Who says it negatively affects his CoG? You just assume that.