JTS AirAcuda Max .25 max power!!! (Almost 60 FPE) part 2! Episode 3

[@tonyrolls8566]

Yes, a really good video, plenty of information, thanks.

[@charleshornung8722]

Great Info. I tuned my Airacuda Max .25 to shoot the JSB king diabolo 25.39g. reg at 2600 to start, and careful hammer spring adjustment. No valve spring cap adjustment yet. I Get 956 fps. 51.54 foot pound. And JSB Hades at 26.54gr are at 926 to 922. 50.45 ft/lb. With the reg set higher I can full 20 shots maybe the last 2 drop to 900-895 fps. I don't shoot past 2000 psi on reg. But I think my gun still shoot when the regulator is 1750. So I don't worry about shooting past my reg. Also I fill at 4000-4300.

[@themichiganoutdoorsman]

Awesome!

[@charleshornung8722]

So I am in Norman county MN. I shoot on the Red River. Red squirrel and coyote. MN is stupid strict on regs made by people who are totally in experienced. Long story short, when I adjust a hammer spring I do it like a sprint car. 1/8th. 1/16 back My reg settled now to 2575psi. I don't know if I can or how to share the chrono results. So I can screenshot and send it. I was just so surprised that what I did worked, and I all was doing setting up my airgun and watching my minnow trap.

[@charleshornung8722]

My elevation is like 850 to 750. Sea level.

[@organiccleanfoodconnection]

What other guns do you have that hit harder than this one. Now that I ordered one :-)

[@themichiganoutdoorsman]

Any of my FX air guns will have the capability to probably double the power. It’s insane. But very costly to buy them.

[@timk7967]

This stuff is great! I’m new to the pcp thing and you explain better than anyone else I’ve watched. I’m not willing to go to 4300 lbs. I would guess it could handle double under testing. Like the climbers in the background they can actually hold triple your body weight. It’s govt bs. Thanks !

[@themichiganoutdoorsman]

Thank you! I’ve got more videos coming for the AirAcuda max here soon

[@charleshornung8722]

Hello, I brought my Airacuda Max out for slug test. 885 fps. Upped my reg to 2800 to start. Then hammer spring adjustments. My low start was 763 fps. 20 shots 1 fill. (4300lb fill). Still trying to figure out how to share my chronograph info. I used HN 25 cal 32g. HP. WOW !

[@davidsettles5706]

Well you know what they say " if your not living on the edge, you're taking up to much room"............4300 psi. way to go......good luck brother.

[@huntersawyer9337]

Hey Jeremiah, great videos by the way.. How about a test on the Airacuda like the Buck Hunter said and back off on the valve spring nut and see what kind of numbers you get. That would be an interesting video. Thx Hunter

[@themichiganoutdoorsman]

Definitely like the idea. We shall all see here soon. 😀

[@giovannim5101]

The JTS are excellent built PCP and price rifles and accuracy ....

[@themichiganoutdoorsman]

I love mine!

[@voltron_5]

Very good content Jeremiah. I'm actually watching DAR and JTS videos to help me decide on the DAR Gen 3. I was concerned with the lower power level (especially with DAR having shorter barrel). I like the DAR more for certain reasons (for me, DAR stock is the way to go. It looks better for me and I don't need pistol grip or adjustable comb). Longer barrel I prefer, but no biggie. Dual air pressure gauge or single, no biggie. Even though I felt DAR might be in the lower power spectrum (originally I thought might be too low), I was looking for something simple, cheap but well made and accurate to shoot my lighter pellets (.177, .22 and .25...I thought DAR Gen 3 was available in .177; I guess not) so I don't have to tune down my other toys to shoot lighter pellets. You've made a very informative video. Thank you. This helps me decide to get the DAR (.22 and .25....I was just looking at the .22; but now it seems that even for the .25 I can be happy with the power and velocity DAR Gen 3 can produce after tuning it up a bit for more pressure/power; but not to HP level). Again, my goal was to use my lighter pellets accurately and conveniently. Thank you bro. Keep it going!

[@themichiganoutdoorsman]

Thank you for your views!

[@JohnDoesItAll]

Useful content, thank you!

[@rickrazz7136]

Thanks for the vid. Appreciate your comprehensive review. Subbed/liked

[@kevinstamp1776]

Mine hit 62 with the regular to 2800 and fill it to 3600 and get 15 on the regular at 62 . .25 cal nice air gun.

[@Cisco1322]

Nice way to explain and show what you did and how you do it. I’m also new to the pcp world. I have a bt65sb Hatsan 22 cal and even tho it says 55fpe from factory, you think I be able to turn it up to atleast 65fpe using the same method or steps you did on your aircuda? Also keep the videos coming I keep watching and supporting you channel. Interesting to see what else you can come up with 🤙

[@themichiganoutdoorsman]

I don’t know anything about the guns you own but I hope so! And thanks for the support!

[@TangDynasty1983]

Thanks for the video. I just tuned the reg. on my .22 Cal to 2200psi to shoot 21gr slug. Is 2200 too high for this gun? Wonder if the 22 and 25 share the same hammer, spring and valve...

[@themichiganoutdoorsman]

I’m not really sure what the max pressure is, but I would think it’s fine.

[@icuppu2]

Firstly, great videos, keep them coming. I watch them over and over again and each time I have more questions to research. Secondly, if you want more power, change the hammer spring compression to a higher k value and compress the hammer spring compression to 50% ' give me your hammer spring free length. outside diameter, wire diameter and total number of coils and I will tell you the springs K-value, which will probably be between 8 to 30 pounds per inch then increase the k-value two notches above your springs k-value and start bringinging the regulator pressure up until the velocity plateuse then regulator back 4% for maximum power and air efficiency. The shot count? what about it? Power and shot count are on each ends of a teetertotter with the fulcrum being the amount of usable air from cylinder pressure down to regulator pressure. Do you know the main tube and plenum volumes? if you give those values plus the great data you give in your videos along with the ambient temperature in your shop range, I can calculate down to the number of average air molecules per shot and per fpe then you can compare apples to apples. Lastly, numbers don't lie, but you can lie with numbers, and the laws of physics are not just really good ideas. FJB Out!

[@296capthook]

Great vid content. Thanks. I just placed an order for the .25 cal. I'm new to PCP but not to rifles. What's your advice for the 1st things I should do when the gun arrives? Thanks!!

[@themichiganoutdoorsman]

Of you like the power it makes just shoot it. I always have to tinker with my guns, so I played around with the trigger on that JTS which helps me shoot tighter groups.

[@sergiodigenova619]

Saludos desde Uruguay exelente tus vídeos vamos por el mismo camino en cuanto a configuración de los pcp y las prestaciones de los mismos una cosa es un pcp para cazar y otra es para practicar tiro al blanco. 💪💪

[@bobbythompson3544]

Why is so expensive in the UK?

[@dcsensui]

You don't know what you're doing, and the information you're providing will get someone hurt. First of all, never overfill the air chamber. Going to pressures beyond recommended limits will cause a failure. And high pressure vessels fail with surprising amounts of energy. Do NOT use any petroleum lubricants on high-pressure o-rings or seals. Under high pressure they can ignite and explode. As for adjusting the regulator, follow the manufacturer's instructions which can be found here: kzbin.info/www/bejne/rH-1e2yij7aVhJI

[@denniscampbell8240]

Just bought this rifle ,,every this is Factory setting ,,,but I noticed when I shot it,,,,the hammer spring twangs like it's loose ,,,,,what do you recommend

[@themichiganoutdoorsman]

I’d try and adjust the hammer spring via the screw in the rear of the action.

[@bassmankelly1744]

What does that springy twang sound mean? Does it mean the hammer spring needs to be tightened or loosened up? My groups are 2 1/4" at 50yds and it twangs pretty loud. I have the 22 cal and I'm shooting 20.2 slugs.

[@themichiganoutdoorsman]

@bassmankelly1744 I am not sure because that hasn’t happened to me in my testing. But I would try to tighten everything up including that spring screw to see if it helps. It could be affecting the barrel harmonics

[@ChristopherRyan84]

Why should i get this over the air Venturi avenge-X in 25 cal?

[@themichiganoutdoorsman]

I have no experience with that gun. I do hear good things about it.

[@jgbelmont]

News headline reads...Man dies tuning bb gun.

[@gmanneod8085]

Nice improvements! Will a bigger transfer port give you more power with more air flow?

[@themichiganoutdoorsman]

Yes I believe that it would.

[@TheAdamant87]

Hi there are these rifles reliable looking to buy one,just worried if there's any issues with them?

[@themichiganoutdoorsman]

So far very reliable!

[@brentbaartmans2725]

Does this affect the accuracy, or accuracy at different ranges?

[@themichiganoutdoorsman]

No I have not seen it affect accuracy. But I have only shot out to 100 yds with this rifle.

[@bdubz1422]

How come when I turn the hammer spring screw in more then 3 turns in i can no longer cock the side lever?

[@themichiganoutdoorsman]

My only guess would be the spring is so bunched up after three turns in, it will not allow the bolt to travel back and engage the seer on the trigger group. I have the same issue if I turn my screw in too far.

[@buckhunter4496]

Waiting on your update video on your findings lol

[@buckhunter4496]

My lowest budget pcp other than the other 20 pcps I own including big bores but I talking about my simple umarex origin 22 cal I own is shooting a 32grain slug at 900fps at 57fpe ...every gun I have shoots double the power because of the valve modification......Im just trying to save you some time and headache

[@slicktmi]

Which valve mod

[@antoninogerbino4074]

@buckhunter4496 I second the old question: which valve mod?

[@ezrabrook3993]

👍🏻✌🏻🤠

[@buckhunter4496]

Hey buddy ... that gun will get up to 70fpe you change the valve spring but just start by backing off the valve spring cap for less tension and I promise you will get more power then you need.... having your reg set that high only makes the valve harder to open against that high psi pressure plus having that stiff valve spring pushing against the valve pin only makes it harder.....if you change that valve spring you'll be able to turn that gun into a monster

[@huntersawyer9337]

where do you get this valve spring?

[@buckhunter4496]

Any hardware ace hardware store or your local hardware stores

[@timk7967]

What do you replace it with? I’m guessing you’re saying a softer spring ? I’m new to the whole pcp thing just got my airacuda max a month ago

[@buckhunter4496]

@@timk7967 yes a spring with little to no tension

[@slicktmi]

I just take the spring completely out keep hammer back when filling

[@nigelbase1196]

Waste of time....if you can't kill something with 50ft/lb you sure as hell won't do it with 55ft/lb....let alone stressing the rifles internals...

[@AndrewWhitney-k3r]

4300 psi gun will handle it...😵 Yeah till it doesn't...🤯

[@sandyschupper8401]

silicone lube NOT GREESE

[@xMrjamjam]

Get a slug swage to make your own slugs, some companies that make these swages will actually sell the slugs for you to test before splashing the cash to see if the grouping is good for your airgun. Reason why o say to get one is that slugs made by a machine often vary a whole lot more in weight and caliber (i use a pellet resizer for this reason for consisrency purposes) get a reloaders scale that does 2 decimal places (amazon sells them pretty cheap enough which are good enough for sorting pellets/slugs by weight) for grain measurements and weigh the slugs straight out of the tin, youll see it yourself how much the weight can vary, using a swage the difference is often only at the most a couple hundredths of a grain and due to them being squeezed into the right shape at high pressure they always have the same caliber which means much better consistency with your accuracy so if you are stacking slugs/pellets with unsorted and unweighed ammo youll be able to do it even easier once you remove more variables. Tldr: swaged pellets/slugs are more consistent in caliber and weight resulting in better grouping and you can buy swaged ammo from some companies that sell swages to test for yourself

[@eddiecahall3824]

The barrel is too short!😆😆😆

[@gabrieltiso8537]

Coming from firearms and being new to pcp I was thinking exactly that. If he put a suppressor on it may be able to squeeze a little more out.. wish they'd make something for coyote patrol at 80 yards. Like the simple design

[@eddiecahall3824]

@@gabrieltiso8537 the actual barrel sits inside a shroud most all models in the pcp air rifle world. If you look up the specs on this model online, the actual is like 17" which is pretty short for air rifle and not very capable of superior accuracy at long distances. You want an good pcp rifle to be at least 19.7" or around 20" on up for long distance or superior accuracy/both. the Air Venturi Avenger model has a 23" barrel. Therefore making it the better choice bargain regulated pcp rifle. Alot of the ones you see here on UTube making really long shots with superior accuracy have good long barrels on them which speeds up the projectile more therefore requiring heavier projectiles therefore making it more accurate. Barrels have different twist rates as well. Slower, faster. Kinda like muzzle loader stuff. So you have to pay attention to all these things when choosing for the need. Also pellets are all different. Some use in fast rate twist barrels and then made for slow twist rates. Alot to pay attention to. But it's fun and with the power and technology of the millennium later years, it's just insane awesome! Me being into air power over 40 yrs now, it's like me being a kid in a candy store! I own a huge collection well over 300 air rifles including pcp stuff from .177 all the way up with big bore stuff and up to 82cal. I hunt and pest professionally on 14 big properties, living the airgunnarz dream😁💥💪😱😱😱

[@eddiecahall3824]

@@gabrieltiso8537 AEA Challenger air rifle is a super choice for yotes. They make .22cal to 72cal . A good .30cal,35 or 45 can be purchased for under 500 bucks! Then it's up to you to get an air pump and scope.

[@gabrieltiso8537]

@@eddiecahall3824 I appreciate the wealth of info! Seems like there's a lot of overlap between pcp and firearms in terms of stabilizing the projectiles. Definitely value your recommendation too! AEA provides a lot of airgun for the money so I'll likely be equipped now soon than I thought. Your the man Eddie 🤘👍

[@ronbrown8559]

Speak up! Too far from the microphone!