Jumper T16 (NEW PROTOCOLS!)

[@TMacFPV]

Thanks for watching! Gonna go back to R-XSR ACCST receivers?🤔 Let me know what you think of these new features and check out my site at TMacFPV.com !😀👍

[@shinuza]

I ordered a bunch of Jumper R1 instead. I did test flashing my LBT-EU and ACCESS receivers to 2.1, the LBT-EU is not binding with the multi protocol internal module flashed to the latest version, my ACCESS receiver refuses to be flashed.

[@TMacFPV]

@@shinuza Jumper R1s have worked well for me 👍

[@mrbogeyfpv]

Hello TMac, I did exactly what you did and did not work for me. I have T16 pro v2 with 2.3.7(what is your version ?>) and updated the internal module and R-XSR following the steps from you video and did not work.

[@Maceyee1]

I love that jumper are rescuing old receiver protocols. They are perfectly sufficient to continue to enjoy

[@TMacFPV]

Agreed 👍😄

[@Dad_K]

Been watching both you & Bardwell. Your channel is far too hidden considering how valuable your content is. Thank you for continuing to educate!!

[@TMacFPV]

You're very welcome Ryan! Please feel free to "spread the word" and share my content with others who may benefit (I won't be offended 😁)

[@S1Sequential]

Best video on the internet right now, Thanks for taking the time to explain this , I wasted so many hours trying to get all this to work and was really about to throw it in the bin and just buy futaba gear, my dream of flying a glider for relaxation had ended up more stressful and complex than work.

[@TMacFPV]

Happy you found it useful S1 Sequential and I very much appreciate your kind words 🙏 Have a blast 🤩

[@thairalazawy6835]

Your videos are great and very useful, thank you very much

[@TMacFPV]

You're quite welcome and thank YOU for making the time to comment - have a great weekend!👍

[@h2o-fpv623]

Excellent TMac mission accomplished the internal module protocol is update in my jumper T16 thank u for the video .

[@TMacFPV]

Outstanding H2O-Lobo, nice job!

[@segpie]

Now THAT'S a tutorial!! Thanks so much.

[@TMacFPV]

You're very welcome segpie! Thanks for making the time to comment 🙏 Have a wonderful weekend 😁

[@acesfull2000]

Just head's up this video got me through a challenge. Thanks so much for making it!

[@TMacFPV]

Most Excellent! Thanks for sharing your success story Photography Winnipeg 👍

[@jensr.hansen1289]

Hi TMac, super help and instruction for a new in this field, I have never found the way through all these without your impressive precise video instructions. Thank you very much from Denmark ;-)

[@TMacFPV]

Happy to help Jens & great to hear from you! Thank you for your kind words 🙏

[@jensr.hansen1289]

@@TMacFPV hi again, I tested it today and it worked perfect on my Phoenix glider so I have now new firmware on my FRSKY GRX8 and new internal firmware and the latest Opentx for the first time thanks to you, and the telemetry did start immediately now, so the update really helped. Thank you again very much 🤗🤗🤗 now I know the procedure.

[@frankschannel2642]

Another nicely done video! See ya back at RCGroups! EDIT: This video gave me the courage to update my internal module. Went exactly as in this video. Although it's likely obvious to most everyone, it bears saying this update DOES NOT erase your models, and no special precautions are required to protect/preserve them.

[@TMacFPV]

Thanks Frank! Outstanding! Very good points you bring out ! Thank you for sharing them for all!👍

[@matthewdemeter8774]

Thank you so much! This fixed my binding issues.

[@gmodesike]

Tmac, you are wild, buddy. 😅 You're awesome! 😉👍

[@TMacFPV]

😀Fly fearlessly gmodeslike!

[@gmodesike]

@@TMacFPV Will do! 😊

[@jorgeromero4680]

That's great news

[@dronie_potato913]

OKAY I’m having trouble I’m at the part where you update the internal module and I follow your steps and I get stuck once I go to the transmitter and start writing the file. HOWEVER after I try to write it the transmitter is telling me it has NO FILE. Any help would be appreciated. Thanks.

[@Jamesn-js1zp]

Hi TMac, another great video thank you. Is there anyway of identifying which firmware is already installed on the FrSky receivers? I've held off updating my old R-XSR's but I've also a couple of new R-XSR's which I assume FrSky may have supplied with latest firmware.

[@TMacFPV]

Thank you! 🙏James, I really wish I had the answer you're looking for because you asked $1 million question! What firmware is currently on the FrSky receivers sitting on the shelves of all the vendors? Do some R-XSRs have v1.x and others have 2.1? Do the vendors site show what version, no. The vendors most likely do not know. Has FrSky said when they did (or will) start shipping receivers with v2.1 on them? Not to my knowledge. So, where does that leave us? Purchase an R-XSR, try to bind it with FrSky D16 with previous multimodule firmware. If it works, then you have a receiver with v1.x firmware on it. If it doesn't and you did everything else correctly, it may have v2.1 on it, in which case you would need to update your multimodule firmware. OR, just update your multimodule firmware to the latest and whatever FrSky ACCST receiver you buy, update those to v2.1 when you get them (which I believe is what I would do--oh yeah, I just did!)😀👍Also, remember there are many other options out there for you as well (see referenced video in link above for those).

[@h2o-fpv623]

Great video TMac. Very nice ill do the work tonight thank very much tmac

[@TMacFPV]

Thanks H2O-Lobo! Have fun with it👍

[@christianschmid2263]

Thank you very much @TMac ! What about G-RX6_ACCST_LBT_2.1.0.frk / G-RX8. Is it working with the new Protocolls? I do have the issue with the servo movements on a G-RX6 receiver. As I am in Germany, I use the LBT Version.

[@TMacFPV]

Supported protocols can be found at multi-module.org . Here's what the site says about ACCST V2.1 which is multinodular protocol FrSky X2 www.multi-module.org/using-the-module/protocol-details/frsky-x2

[@christianschmid2263]

@@TMacFPV so, uses the X6R the same Firmware as the G-RX6... too many Rs and Xs ;) Unfortunately there ist nothing to find about the G-RX Versions on the web about this topic.

[@TMacFPV]

The ACCST D16 firmware for the G-RX6 receiver can be found on FrSky site here www.frsky-rc.com/g-rx6/ which is supported per mult-module.org site provided earlier

[@artemakimov7769]

Hi there! I've updated my internal multiprotocol module on Jumpet T16 pro to the latest version but I'm still unable to find FrSkyX2 protocol when I'm trying to bind receiver. Is there anything else I need to do (update OpenTx or something else)? Multi protocol version is 1.3.0.91 and opentx version opentx-t16-2.3.2. Thanks!

[@macelius]

Another extremely helpful video, now I know I can go with the S or PRO version of the X-Lite and maintain backwards compatibility with the T16 and XSR I currently use. Thank You!

[@Wickedsight]

Thanks a lot for the great videos. I have the T16 and a couple of Jumper R1F receivers. I've been trying to get them bound, but it's not happening. I've flashed the new multi protocol firmware and tried binding in Frsky and FrskyX2 in D16. I've tried to bind with a fresh RX and with an RX on which I flashed the R-XRS 2.1 FCC F-port firmware (RXSR_ACCST_2.1.0_Fport_FCC.frk). I'm not getting anything to bind. I'm in Europe, so there could be some FCC/LBT stuff going on, but I've tried both of those too. Do you have any pointers on what I could try next?

[@TMacFPV]

One thing, when flashing new firmware to the R1F, its an XSR clone NOT an R-XSR clone. So, you need to use XSR firmware

[@Wickedsight]

TMac thanks for the reply! I tried the XSR firmware, but that didn't work either, maybe because there's no XSR F-port firmware? I also tried the XSR-M F-port beta, but that didn't bind either. I'm pretty lost right now at what I'm doing wrong.

[@RobertDylina]

@Tmac Where did you get those console style stick ends?

[@TMacFPV]

Here you go Robert www.amazon.com/Hobbypark-Transmitter-Umbrella-Spektrum-Taranis/dp/B07MXBRX6S

[@ThrunRC]

Thank you very much for this great Video ! It helped me a lot !!! Keep it on !!!! :-)

[@TMacFPV]

You're quite welcome, happy to hear it! Stay in touch and stay safe my freind!

[@Froylich]

hello, I saw at the end of your vid that you have got RSSI value around 115db (+-) ... is that fine ? i used to get rssi around 100db and less... so ? how should i regard it ? same for frequency tuning ? doing the same ? many thanks !

[@regularguyrcreview8686]

Thank you, thank you, thank you!

[@TMacFPV]

👍

[@RubyS.1]

I just looked through all your videos and noticed you don't have DJI fpv and kinda curious as to why. I just bought it and flew it all day with my crossfire and it's pretty nice debating whether I would buy it again I think so depending on how I'm flying. Just wondering if you have tried it or care too.

[@TMacFPV]

Hey Ruby! Great question! You are correct, I do not have it (yet). I don't usually "jump" on the first edition of things that come out in this hobby, been burned too many times. Waiting for the next "competitively-priced" digital system with all the bugs worked out. I've been flying my $270 Aomway Commnader V1s and they work just fine for my purpose for now!😀 We may see some "improvements" come out this summer hopefully. I understand the DJI picture is awesome though, you're lucky!

[@RubyS.1]

@@TMacFPV Smart. I'm a small framed female and didn't like how the dominator style fit. The fatshark scouts where perfect and before them I flew fatsharks with a giant gasket thing. The scouts with a caddx ratel are really nice for me anyways. DJI above 20 feet is really nice but down low with objects in the way you can see it. My brother said before the updates it would just freeze now it looks like Netflix when the signal isn't so good. the latency wasn't an issue most of the time. Best part is at 700mw the next person can be on the next channel and there is zero effect that was impressive.if you wait for the next one you won't miss much as of now. And no audio while you fly is strange I prefer to listen. I got my GPS thing setup this morning from your how too. Its super weird like a robot takes over. Thanks tmac appreciate you.

[@TMacFPV]

Ruby, thank you so much for that info, very nice of you. I too like the audio when I fly! I think you're the first person who's actually said that to me 😁Most people have never tried it and don't know what they're missing. I love the Ratel! Real nice image and great picture quality at dusk. Right now, I'm very happy with Caddx Tarsier V2. Great FPV image in goggles with one can and HD on SD card with the other. I've got 3 of them installed 👍Have a great week!

[@DavidReynolds-kr6yh]

Good to know, I accidentally stuffed up the last update, I had other stuff on the memory card. It works but the screen flashes a bit, time for an update.

[@TMacFPV]

Hey David! No time like the present! You got this 👍Have a great weekend 😁

[@joevo2]

Thanks for the detailed guide. Interesting video. Somehow I’m glad that I went with crossfire instead 😂 don’t need to deal with servo cable. Only thing is slightly more expensive receiver but glad they cut 5usd off permanently recently. What’s the difference between access and accst btw?

[@TMacFPV]

Hey Joel, quite welcome friend👍ACCST is FrSkys previous version firmware (been around for a long time and a whole lot of receivers and TXs use it). ACCESS is FrSky's newest firmware which is compatible only with FrSky transmitters. It has 24 channels instead of 16 for ACCST. It has slightly less latency than ACCST, and "automatic binding" (similar to XFire) by "registering" your RX to TX first. I primarily use Crossfire myself. "Just works!"

[@warandv6614]

@@TMacFPV do you know if other radios like Jumper T16 will support the ACCESS protocol ? or is it proprietary ?

[@TMacFPV]

@@warandv6614 ACCESS protocol is currently not supported by multi-protocol transmitters (Jumper T16, Jumper T18, RadioMaster T16, etc.) and it is proprietary

[@ChrisLBradly]

The protocol doesn't seem stable on the xrsx. In betflight on the receiver tab i can see the channel signals flicker and the quad moves without stick inputs. With the a xm or xm+ the channel inputs do not move/flicker unless there are stick inputs. I am using a T12 radio on opentx 2.3.7 and the same version on the 4-in-1 module v1.3.0.91. Have you noticed this?

[@TMacFPV]

I have not. have you attempted to fine-tune it per www.multi-module.org/using-the-module/frequency-tuning

[@ChrisLBradly]

@@TMacFPV i just did but no success. i replaced with a xm+ and no fluttering. what version of opentx are you running?

[@TMacFPV]

2.3.7

[@TMacFPV]

Also, MPM firmware version 1.3.0.91 Use FrSkyX2 for binding

[@ChrisLBradly]

@@TMacFPV i'm running same. maybe a compatibility issue with the t12 but not t16. thx for the info! i'll try experimenting on another quad and different settings. if i figure it out i'll share. cheers

[@Just4FunRC]

i did the update but I got the t16 pro with internal module. i can bind to emax AIO tinyhawk 2, tinyhawk freestyle no issues. trying to bind my new iflight xl5 with XM+ /r-xsr my diatone taycan with r-xsr wont bind either internal module v1.3.0.95 xm+ v2.1.0 r-sxr v2.1.0 OpenTX 2.3.7 no luck what so ever. it just sits there full green full red. am i running the wrong firmware versions?

[@TMacFPV]

Are you using FrSkyX2 protocol for Multi-protocol Module?

[@Just4FunRC]

@@TMacFPV woops i did frskyx ok xm is binded quad is beeping but not spinning :p r-sxr no luck yet. I thought made it so third party like jumper t16 wont be Abel to use the new accst2 :/

[@Just4FunRC]

@@TMacFPV SORTED! Sorted!: im total novice with quads so, i found the issue and wanted to share it. my iflight XL bnf analog had GPS! i live on the mountain side and oure house has some dense concrete. GPS couldnt get a FIX posision 　 so i typed set gps_rescue_allow_arming_without_fix =ON

[@joevo2]

Just wondering is there any benefit to ACCST v2? Do you know if XM receiver comes with D8 or just D16? If D16 it’ll come with either accst v1 or v2? So I just select the correct option on my MPM radio and I’ll be good?

[@TMacFPV]

ACCST V2 was developed (supposedly) to correct inadvertent/random servo movements in fixed wing aircraft. ACCST V1 works fine for quads. Tough these days to know what firmware will come on FrSky receivers. But, yes, if you get an XM+ it will most likely come with ACCST V1 or V2 and you just try them both on your multimodule of the transmitter. See FrSky X or FrSky X2 here www.multi-module.org/basics/supported-protocols Also, you may be able to bind in either D16 or D8

[@countryboymotovlogs926]

Howdy Tmac, does this apply to the roadmaster TX16S? Thanks!

[@TMacFPV]

Howdy CountryBoy Motovlogs! Yep, sure does!👍Basically, all of the videos I have about the Jumper T16 apply to the RadioMaster TX16S since both are running OpenTX (System) firmware and both have the internal multi-protocol module.

[@donaldhill2076]

Just one more quick query. I recently uploaded a new slash screen and others and they are fine. However, I've now got a very stuttery Hello voice. I removed everything and went back to all standard but it's still there. You can understand it but it's all broken up. Any ideas?

[@TMacFPV]

Loose connector from the speaker board inside the TX perhaps? You're not using the original SD card that came with the TX are you? Maxed out SD card if you are? Original SD card is no good. All just thoughts 🤔

[@donaldhill2076]

@@TMacFPV Now thats a point regarding the SD Card. Ill replace it since I am using the same one that came with it. I think if it was a loose connector it would happen on all voice files. Again thank you for your thoughts. Beautiful day here and we cant fly grrrrrrrrrr. Im going to build a micron drone as per a vid you did in Jan. Something to do

[@aurelhollowgram]

thank you for this amazing vidéo. please you know if it's the same for the radiomaster t16? thank's!

[@TMacFPV]

Good question! Should be the same because I believe they both use the same chips for their multi-protocol module and its the same folks that work do the work and develop the code for the module. So, the multi-protocol module firmware should be identical and therefore the procedures would be exactly the same. You do, however, need to keep an eye out for the latest firmware version on BOTH the multi-protocol module www.multi-module.org/ AND OpenTX www.open-tx.org/downloads (think OpenTX version 2.4 will have RadioMaster TX16S).

[@aurelhollowgram]

@@TMacFPV thank's a lot, i am waiting for it, and i have to know all to have the best firmware and more. i hope it be my all days radio, because i have many differents protocols and radios, now one for all? i hope it work's well. thank's for all ;)

[@yessir209er]

im soo glad that im subscribe to man . this video really help me . plain an simple thanks again

[@miguelcotaque4637]

hello i just received the radio master tx16s and i succesfully bound it to RxSR receiver but i am getting no outputs would you consider firmware issue the problem?

[@TMacFPV]

Hey Miguel, congratulations on your new TX16S! Nice! Well, I have no idea what firmware FrSky is currently shipping on their receivers. I'm guessing it has ACCST D16 v2.1 firmware on it. If that is the case, you should try binding it to your TX16S with FrSky X2 protocol within the internal multimodule. IF it has the older ACCST D16 version firmware on it, just try binding it with FrSky D16 protocol. so, try one and see if it works. If not, try the other. There MAY be two FrSky X2 protocols which show up on your internal multimodule (for some unknown reason, that's what I have). If so, try them both. The 2d one that showed up on my module worked for me.

[@miguelcotaque4637]

@@TMacFPV ok thanks for the advice, i had no idea of witch firmware version i had so i updated them both to the latest i had no luck with my issue :/

[@wehttamak]

where can i find a list of the protocols that the radio support ?

[@TMacFPV]

www.multi-module.org/basics/supported-protocols

[@FPVStyle]

Very cool thank you so much 👍

[@TMacFPV]

You're very welcome FPV Style👍

[@FPVStyle]

I did a other mistake, I also pusched the button and switched the mode from the reciever. To the ppm mode only the green led lights up. Telemetry was working but no connection to FC.

[@ullischmi]

always educational ...

[@TMacFPV]

Thank you! 🙏Hope it helps you out some

[@markhavenocash1822]

Thanks, you helped me al lot! great video.

[@TMacFPV]

Happy to help Mark! Thank you 😁

[@donaldhill2076]

Hi TMac, I just uploaded the v2+ firmware to an X8R and reflashed the Jumper T16 internal module to the latest version . I cant get it to bind. I accidentally did this a couple of weeks ago and had yo go back to an earlier version so was hoping this would work. Maybe Ive done something wrong but I can't see what. I've checked that the correct firmware is loaded on the X8R and the T16 module. Any ideas?

[@TMacFPV]

Hey Donald! Good to hear from you. No ideas, without more info. What version OpenTX do you have installed? Latest? What version of the multimodule firmware do you have installed? Latest? Did you flash X8R_ACCST_2.1.0_FCC.frk (or the LBT version) from this site: www.frsky-rc.com/x8r/ ? Did you choose FrSkyX2 in transmitter for binding and turn External RF OFF (assuming you have an internal module)? Did you try "frequency tuning" per this site prior to binding? www.multi-module.org/using-the-module/frequency-tuning . Those are things i can think of to check.

[@donaldhill2076]

@@TMacFPV Ill get back to you shortly after checking all this out. I am assuming then that it should work with an X8R and not just with the Xsr's?

[@donaldhill2076]

Sorted and yet again thank you. I didn't choose FrSkyX2. Works perfectly. Hope all is well with you over there. We are about to come out of level 4 of our lockdown on Tuesday so fingers crossed. At this stage, we still cannot fly anything but really stupid since you can go fishing, play golf, swim, go to the beach etc etc but oh no you can't stand on a park all alone and fly a drone or plane. drrr

[@TMacFPV]

Check out the descriptions on the site mentioned in the video for FrSkyX and FrSkyX2 protocols

[@TMacFPV]

Great to hear Donald, outstanding!👍Yes, there are some things going on that just make you go hmmmm 🤔 Stay safe friend 😁

[@nickvledder]

Question: opentx has already supported the aformentioned protocols for a while. Why would one not switch to opentx having the Jumper T16?

[@TMacFPV]

Jumper T16 uses OpenTx as its operating firmware also. See this first video I mentioned for further info on explanation - kzbin.info/www/bejne/b3-Zd3t9nsSfqq8

[@samavella8831]

Thanks TMac. As always, great video. Now all I have to do is to get my Jumper T16 to be able to flash an external receiver. I sent you an email on my latest findings as to (possibly) why I can’t flash any external devices with my Jumper T16.

[@TMacFPV]

Appreciate it! I'm still thinking its an internal ribbon cable connector that needs to be disconnected and reconnected OR your servo wiring harness used to flash receivers has a loose connection in one of the connectors

[@samavella8831]

TMac I took it apart twice and I don’t see a ribbon cable that is associated with the module. There’s a JSP wiring system at the bottom that plugs into it and I’ve disconnected and reconnected it twice now. I don’t think that it’s the servo harness because I can’t even flash the latest firmware for the JP4IN-SE external module. When I try it gives me the a Firmware Update Error - NoSync

[@samavella8831]

If I put the old factory delivered module back on just to try and flash both the JP4IN-SE and the receiver would that screw up any of my internal models or the existing settings on the internal multi module?

[@christopherbigelow1323]

Can you use x-car on the Jumper T12

[@matthewbarger4592]

where are spectrum radios made?

[@mccolld11]

Hey Tmac, I've yet to pull the trigger on a Jumper. Can you tell me what kind of range you're getting with the multi module? I assume it is limited range like my Devo7e (my toy level TX) versus the full range native module.

[@TMacFPV]

Hey Ferociter! The Jumper T16 pro (and now V2) comes with an internal multimodule integrated within the transmitter (actually INSIDE the transmitter). Your "range" will depend on many factors, however, the multimodule it uses is "hobby grade" not "toy grade." You can learn more about the multimodule at www.multi-module.org/ . Its got the same standard output power as other hobby grade transmitters. The type of receiver you use on your RC aircraft, the environment you fly in, etc. will affect your "range." Many experienced FPV pilots use the Jumper T16 Pro. It also has an external module bay which you can plug a TBS Crossfire module into (that operates at 900 MHz instead of the regular 2.4 GHz) that will give you more than enough range for whatever type flying you do (it also penetrates wooded areas and buildings better than 2.4 Ghz so you can fly in/through/around trees and buildings without losing control signal. Hope that helps and stay in touch!

[@mccolld11]

I have an X10s with a R9 module. It recently failed so I'm going to replace it soon. But I don't want to loose my RX investment...... Too many quads to convert to TBS. Jumper looks great!

[@TMacFPV]

@@mccolld11 Oh no! Sorry to hear about your X10S! What happened, how did it fail? I've enjoyed my original T16 Pro (V1) since October 2019, no issues. I understand your R9 investment, I also used R9 for awhile. Only had the RXs on 2 quads though, so when FrSky went to ACCESS, I made the switch to Crossfire. i say, whatever works for you, just have fun!👍😀

[@mccolld11]

It just quit broadcasting on both 2.4 GHz & 900 MHz. Everything else works. I'm right there with you! I want to get away from frsky, too.

[@dlofpv5408]

is this update available for t8sg plus v2?

[@TMacFPV]

I do not believe t8sg plus V2 transmitter is supported by OpenTX operating system firmware. i think it uses something else, therefore I do not know if the firmware that it DOES use has this update available or not

[@bjorndestree8496]

Hi Mac, am i right ? It is still not possible to flash 2.1 on a Jumper R1 Receiver. Binding is still not possible. By the way. Top Video.

[@TMacFPV]

Hey Bjorn, great to hear from you and thank you! I have flashed my Jumper R1 with ACCST D16 v2.1 firmware using the same process and I was able to bind it with no issues. Remember, as stated in the video, you need to use XSR firmware (not R-XSR firmware) and bind with FrSkyX2 in transmitter

[@bjorndestree8496]

@@TMacFPV 🙈Thanx, i used the wrong Firmware.....

[@TMacFPV]

@@bjorndestree8496 Sure!

[@dannyblake6036]

im guessing this was just for demonstration? you used model 0...I was doing that with the taranis. you are supposed to fine tune each receiver to this radio right?

[@TMacFPV]

Yes, demo purposes only, I did not get into fine-tuning the receiver (which I have another video on), nor setting anything else up in the transmitter. All the info on fine-tuning is here: www.multi-module.org/using-the-module/frequency-tuning

[@dannyblake6036]

@@TMacFPV no no...all good. im tracking that part. only real beef with the jumper and its not really a big deal. I had just switched my fleet of all 4 quads over to 2 models. lots of work there! so when I went to the jumper I see it up the same way. then I found out about the fine tuning and basically started over. was just double tapping that there was not another way to do this. thanks for the speedy reply! keep up the great work!

[@D_FPV]

Please tell me why, when I bind to rxsr, 3 led lights up, and nothing happens ????

[@TMacFPV]

What protocol did you bind it with? Perhaps it has FrSkys version 2.1 firmware on it? If so, you'll need to bind it with FrSkyX2 protocol in the Multi-protocol Module

[@D_FPV]

@@TMacFPV I wish everything the same as in the video ... Jumper t16 + r-xsr....not work

[@henvan8737]

Great FRsky spends months working on the V2 firmware for their transmitter and receivers and Jumper just steals it as soon as it is released. When will jumper do some of their own development.

[@MKultrapdx]

Why did FRSky do the same thing to futaba years ago?...

[@SubashSinghscooby]

Great instructions.

[@TMacFPV]

Thank you! Stay in touch, stay safe, and clear skies friend!👍

[@SubashSinghscooby]

@@TMacFPV thanks for creating such great videos. I enjoy watching it.

[@andreaalesse8203]

Hi, just flashed R1+ with ACCST 2.1 and works fine, but I've got an error executing lua script for BF bf.lua): Telemetry protocol not supported ! I also updated scripts to the latest version available. IS anyone facing the same issue ?

[@andreaalesse8203]

Solved installing latest nightly opentx version: 2.3.8N211

[@nimaiazevedo7383]

the radiomaster tx16s is better and cheaper ;)

[@TMacFPV]

Quite possibly!