HVACR Service Call: Hoshizaki Ice Maker Not Making Ice (Hoshizaki Troubleshooting/Hack Job Repair)

[@scottmaz4063]

If you ain't testing your guessing

[@Hopefullymarried]

That’s what my boss tells his guys all the time!! Guessing can cost time and money, and maybe your life is it involves electrical

[@JumpermanTech]

Facts!

[@JumpermanTech]

@@Hopefullymarried agreed ⚡️

[@swanjaymusic]

Wow ok power suppy is always step one. I do not like going behind other techs, but some times i was hired to go behind all the techs in the company and the messes i would find was unreal. I have mad respect for you. thank you for reminding me how its done.

[@razaramees7]

The satisfaction after completing a breakdown, next level 💯❤️👏🏼

[@bradmironik6137]

Interesting outcome. You're correct, ice machines can be tedious especially if haven't worked on them.

[@JumpermanTech]

It was. Thank you! They definitely are. Stay tuned for new videos every week🔧⚡️

[@dannythompson1948]

I will never understand why hoshiaki has the reputation it does when they're a pain to work on, a pain to PM, and every unit I've seen has constant issues.

[@Rico-oy3dc]

When you start worrying about time, you are slipping up. You just charge for it. Not doing preventive maintenance has consequences. You run through a cycle following the sequence of op and watching the dumps, purging the sump, etc.

[@marcoferreira226]

That's the one things that gets me is time, and you're so right.

[@gantmj]

Some people want a life instead of more overtime money that the federal government steals anyway.

[@jenniferm5375]

Jumper man new subscriber here, hvac did a little bit of walk in coolers and freezers, but never got into ice machines, i love your process of elimination and common sense, using your hands and eyes and ears to troubleshoot is something newer techs dont apply now days. Best detailed video and looking forward to learn from you, yes after 20 years ,love this trade, thanks so much for the effort and keep them coming

[@JumpermanTech]

Thank you for subscribing and thank you for the thoughtful comment. Much appreciated 🙏 Love this trade also. It's great. Stay tuned for new videos every week🔧⚡️

[@92Blackjeep]

that was a good one. just goes to show you, dont jump to conclusions when troubleshooting

[@JumpermanTech]

Facts. Thank you! Stay tuned for new videos every week🔧⚡️

[@bennimotlatsi8901]

I like how you gave your time on how to find the troubleshoot of that ice machine it was time consuming

[@agentmobius8458]

Awesome repair video. James, you are very knowledgeable. I learned a lot. Love your commentary!

[@ashyknuckles1161]

Great job. It’s all about the troubleshooting!

[@JumpermanTech]

Thank you! Stay tuned for new videos every week🔧⚡️

[@ilc-nl3yy]

I have a 6 year old Km-201bah that I maintain well. Sometimes it'll beep once and sometimes 3 times, so I reset it and it'll work for several days. I had it checked out and everything checked out okay. He said it could be a relay on the control board. It's in my garage and has been doing this for a little over a year. Could it be air circulation in my garage? Would putting a small portable air conditioner or dehumidifier close to it make a difference or replace the control board?

[@kingofthecrease30]

the video title says hoshizaki ice machine but the thumbnail picture is a manitowoc machine 😂

[@jmfoster517]

Diabolical

[@philltafolla]

What threw that person off is that the water pump was coming on but the compressor wasn’t assumed the compressor or compressor components were bad . Guess what all HOSHIZAKI water pumps are 115v not 208/230v that’s the purpose of having a NEUTRAL at the incoming voltage 😁😬. Good fix JMT 😃

[@livingyourbestlife711]

sheesh! That was some show! I get those idiosyncracies all the time. Right now working on a Hosh where I can't get the power to go on after someone tinkered with the caps also. Good detective work with the meter JMT! Thanks for sharing! I wish I coulda seen how you wired the caps. I am thinking about the CB being replaced bc nothing comes on with the one I'm working on Thanks!

[@mansourramzey7711]

Wow , at least you found the problem, great job 👍

[@JumpermanTech]

Definitely. Thank you! Stay tuned for new videos every week🔧⚡️

[@chiplaurn8175]

Great video, keep fighting the good fight! Going to show this one to my students.

[@La2venida]

In a situation like that where you can’t get to the compressor wires and you have to check potential relay -what terminal you check on the potential relay to check for power to compressor?

[@samakagi4239]

So one leg of 208 volts wasnt passing thru the two pole switch? If so how was small gauge jumper able to carry the power across the bad switch without overheating?

[@crystalcleanappliance5903]

im thoroughly impressed..well done

[@JumpermanTech]

Thank you! Stay tuned for new videos every week🔧⚡️

[@engeclimarefrigeracao3644]

I think it's very cool analysis for the diagnosis of the problem. I learn a lot!

[@JumpermanTech]

Glad you're learning. Thank you! Stay tuned for new videos every week🔧⚡️

[@johnwalker890]

Good job Jumper, Make sure you wire the switch properly.

[@JumpermanTech]

Definetly. Thank you! Stay tuned for new videos every week🔧⚡️

[@sherwinalvarez7365]

Man that was some great troubleshooting. Can't wait till i get nice with the meter like that. This video may have stepped my game up. With those baffles, the worker take them out so they can get ice out faster. Not knowing they are costing the company money. I usually pop out the inspection window to drill them in from the inside. The baffle is thick guage so you make your holes outside then install it and put the screws in the plastic.

[@ilc-nl3yy]

I own a KM-201BAH, which is a great machine, but it's too small and need to upgrade. I need a machine and a storage bin that will hold between 300-400 pounds of ice. I know Hoshizaki has a stainless steel evaporator, but what quality machine would you reccomend that will last and is easy to maintain? I use it for my mobile hot dog trailer business. Thanks.

[@ThebrownFREEK]

“At the end of the day, they know who’s the man around here!” Hahahaha hell yeah! Let me know what time it is!!!

[@leonelgarza8278]

Awesome troubleshooting. Keep up the the amazing videos!

[@Osirus1156]

When I was in QA we coined the term at our company "If it's not testable it's detestable".

[@landonphillips7013]

Saw it immediately. No caps.

[@JumpermanTech]

Thanks for watching! Stay tuned for new videos every week🔧⚡️

[@BLUE_COLLAR_REFER]

The piece in the front you’re referring to is called the “snout”. The units over the bin are called head units and the remote condensers are outside/on the roof

[@BLUE_COLLAR_REFER]

Float switch controls beginning of harvest. Freezer timer max is 45-60 depending on what unit came set for from factory. These units are 45 minutes. 8/10 3 beeps is a lack of water from dirty filters or dirty machine or plugged water filters. 1/10 times low on charge and 1/10 bad water inlet valve or clogged inlet valve not letting enough water into sump. These units have a factory set 1 minute fill time so if sumo isn’t at least 3/4 the way full after 1 minute check water inlet valve. If compressor starts before 1 minute and sump hasn’t filed all the way it’s your float switch

[@BLUE_COLLAR_REFER]

Dump valve seal also gets dirty sometimes which allows a little bit of water to leak out the drain

[@Xhupacabra]

this guy doesn't fully know what he is doing.

[@SULK81]

Thats why you're the Jumper Man!! They came in handy..

[@eddevoe2519]

Ice machines are the most complicated systems most of find in commercial refrigeration. Lots of rabbit holes to go down. Each manufactures has their own proprietary systems then all the different manufactures. Customers don't appreciate what we have to know.

[@livingyourbestlife711]

Partstown is my go to! over 3000 machines, how we supposed to know 'em all. Then, the customers says, Parts? we need to buy (expensive) parts? go figure!

[@La2venida]

Why were you getting 120 to ground for each of the wires on the load side of the switch if you had a missing leg? That’s were I get kind of needing more understanding.

[@ThanhTran-yi8mj]

How long the cycle for ice?

[@La2venida]

Min 18:49 : the 208 was expected across which terminal?

[@ДмрГсв]

Привет какой мультиметр посоветуешь?

[@rikispanglaz7423]

Always comes down to training down voltage , the things you find 😂

[@justdoit8613]

You are the boss! great job.

[@yonkromis7883]

Would recommend making a platform to stand on so you're not standing on the wet floor and possibly getting shocked really bad otherwise great video

[@jaimedpcaus1]

Nicely done! 👍 great work!

[@JumpermanTech]

Thank you! Stay tuned for new videos every week🔧⚡️

[@jd3413]

Your channel covering all the systems i need 😂 good job bro 👏

[@mohamedzarookfaizeen5422]

Good job done- excellent work

[@JumpermanTech]

Thank you! Stay tuned for new videos every week🔧⚡️

[@eddevoe2519]

run and start should equal the common. Draw a circle and 3 dots to represent the comp terminals. write the ohms between each pin and the number Opp is the resistance for each winding, common should be the sum of run and start windings.

[@SovereignMax]

Ice machines are a plumbing fixture that uses refrigeration like water coolers.

[@eddevoe2519]

Somebody took capacitors to replace them and never returned.

[@keovongvilaykeo4799]

Great video thanks 🙏 you great information 😊

[@Rosimosi06]

Bro any suggestions to why a maintvoc ice machine stops making ice… it automatically turns off then we have to manually switch it back on to “making ice” then it turns back to off mode… any solutions?? Much appreciated

[@christopherkidwell9817]

Just... insane here. When a business does not properly repair the device but 'hodgepodges' it together like this, I would advise the person employing me to fix it to contact the previous company and get on their case about it, giving them the proper video documentation so they can seek legal help.

[@fazesenso2864]

Wouldn’t you check for for proper voltage to begin with ? Would of saved some time .

[@Darren-lx7xi]

Troubleshooting 101. When you're lucky enough to have a duplicate system, you have gold.

[@terrygrant8126]

Good Job!

[@vinnyp16]

Appreciate the video definitely learned a lot on this

[@JumpermanTech]

Glad so! Thank you! Stay tuned for new videos every week🔧⚡️

[@vitomarciante6487]

Awesome video man.

[@nakiapringley5391]

Awesome bro

[@JumpermanTech]

Thank you!

[@zekenzy6486]

Great Video. Good Job. Nice Work. Thank you for sharing. Is that 3 phase switch ?

[@MintyBreeze]

No there are only two power legs

[@Supanova70]

id0906a-261 harvest sequence when does water go over evap right away when turned on?

[@mzytptlk]

Rate for previously attempted repair: 10 X

[@scottmaz4063]

They don't want to pay for perfection. Try to save couple of bucks. Guess what it just cost them more money.

[@Allegedly2right]

Spot on

[@kennethlobo4420]

Great video, they should have informed u on the disconnected wires.

[@JumpermanTech]

I agree. Thank you! Stay tuned for new videos every week🔧⚡️

[@joelmartinez850]

Super Tech!!!!!!🎉🎉🎉🎉🎉

[@lawdog516]

Your really good Bro!!!

[@christopherlucas6209]

Great video!!!!!

[@supremeaircomfort165]

Good work 😎

[@eddevoe2519]

I had a customer who was an engineer. He would attempt to repair himself then call me. I would have to put everything back together just so I could start diagnosing. Told him he was costing multipul hours on each call from me.

[@Jonnybravodude]

Didn't say if you fixed the water leak issue

[@shine-cg9uf]

❄️💪👍🇺🇸 JMT aka MacGyver to the rescue great troubleshooting

[@fakku6356]

To me it looks like you did everything correctly 😂

[@Hopefullymarried]

Building maintenance just cost them money that didn’t need to be spent, maybe in time but not at this money….😅

[@nicolerennie]

👏🏼👏🏼👏🏼

[@ronnym1977]

A bad two pole switch, unbelievable!

[@leonardosinche126]

I remember when I worked for ice company they would disconnect it if they didn’t pay the lease for the machines 😂

[@ILoveKittys78]

I love you❤

[@harrydickson4575]

👍👍👍

[@persimonsen8792]

👍

[@thesilentonevictor]

Hmmmm simple leave it to the professionals jmt in the super tech

[@nathanbennett9025]

I wonder if the last guy left the switch like that because he found there was no 208 and he probably told them to get a electrician to replace the switch

[@Xhupacabra]

if i had a wiring schematic in front of me I wouldn't be saying redundant things like "where does this go to?" "ima use this side as reference" "hopefully it doesn't blow up" to me it seems like you need way more experience on these units.

[@roceloi]

Never assume that you have a good voltage... I had been troubleshooting machines, with welds fails.... and it was not correct voltage at the transformers or income... if yoy have a machine with 24DC, 24AC and 220V or 400V please check all the voltaje and fuses... the easy part first!!

[@arielhernandez2911]

Gotta pull the label marker and label the switch with the breaker panel and unit 1 or 2 lol

[@LDriggs]

Nice troubleshooting

[@DanielHernandez-tp2tm]

Two add up to the one.

[@luisbenitez3428]

This guy is a BAD ASSSSSS

[@biggbossman1130]

I hate working behind someone, now they have to pay

[@TheJj787]

Your missing the contactor

[@CCCPBAR22]

Dude, you are tough. Tattoo says: "Жизнь или умереть" (RUS) = "Life or to die"

[@paulodiaz5774]

All of that and you repaired their switch. you went the extra mile there.

[@utoobmann9083]

10:04 Mission accomplished

[@gerardoloera5713]

wow what a nightmare

[@arielhernandez2911]

They need a deep cleaning to

[@NROhvac]

😂😂😂 to think I’ve seen it all

[@andygaudet]

But.. why they having other people touch stuff?? 🤣

[@rocker8692]

Why do people mess with stuff they dont know anything about,geez

[@robertog3418]

the ole...bad switch...

[@steveH384]

if i saw a space that small id just tell em no

[@sherwinalvarez7365]

Thats how it is in NYC.

[@steveH384]

@@sherwinalvarez7365 crazy it gets by any inspection, cant imagine installine it there either. no amount of money could get me to do this work in that place

[@2969566]

жить или учиться?

[@chrissipple1018]

Complain once and move on. No reason to keep complaining.

[@dsummerfan]

No help

[@АлексейАлексеев-э2ч6й]

На руке по русскому написано