Just a little block extension

[@bethtp1]

i like a 10 mm drill as a sds bolster substitute

[@oliverwatson311]

😂😂

[@peterdunn2704]

Like seeing the van setup!!! Keep it up - Federer ( of brick laying )

[@mikea8315]

Good job Charlie. Hello from florida.

[@JD2747]

Great building. Though I’d hate to be the plasterer between the fence and the wall. 😂

[@user-ky7ty3ie1x]

Hi what dewalt hammer drill you use

[@aaronhanratty6018]

Where did you get the tub from mate

[@TheWanderingMason]

Mate, I've been without a car. I've been taking the paddle mixer and tubs on a bike trailer. No bills hey lol. Not a permanent thing.

[@JimJimpmjj]

I have to 2nd this. I brought a DeWalt paddle mixer and some gorilla tubs. Works out lovely mix for smaller jobs. Cleaning is so much easier. Transport and setting up and making the muck is so much easier, win win.

[@CharlieCollison]

That’s dedication mate 😂👊🏻

[@alternativeopinion310]

No vertical dpc?😮

[@JUNIORKRIBRIDE]

What a guy 👍💪

[@notsosmartmart5402]

Nice one Charlie could you share links for the mixer and the rubber bucket please ? :)

[@niallw6228]

Charle dewalt battery saw are the Bella saw?

[@ianparker3486]

Great work Charlie

[@steadfastandyx4947]

You are the Federer of laying. Agree cleaning mixer's is a pain and so messy.

[@Sam.147]

Charlie, what make are your boots please??

[@MatrixReptilian]

y like film-star, which one of them Shot Caller?

[@ripvanwincle2258]

Hi Charlie just wondering why the dpc is so high looks like it should be on the first course of block?Have a lovely day.

[@JackGashRawandUncut]

What do you reckon to belle battery powered mate? Battery life ect?

[@brickbybric]

Ash Mahoney has a bit of information on them in his latest video .

[@JackGashRawandUncut]

@@brickbybric cheers pal

[@samsingh2042]

Hey Charlie, what levels are those

[@CharlieCollison]

paddle mixers are pukka 👌

[@eamonmoore6134]

Definitely handy for them jobs

[@JimJimpmjj]

@@CharlieCollison agreed, haven't used my belle mixer since getting the paddle mixer. No matter the job I just use the paddle mixer so much easier to clean transport set up etc.

[@Jim_Newlands]

I've had my Erbauer one for about 6 years now. I use it nearly every day and it has never missed a beat. It only cost me about £70 from Screwfix! Worth it's weight in gold for smaller jobs.

[@owencryer3720]

⁠what paddle mixer you got mate?

[@Crips2432]

What's pucka...is that French..

[@prodiet1]

I've been using a paddle mixer for years. We are slow learners over here.We dont like change. Dumped my two bell mixers.

[@jackchapmanwalker963]

are you using a drill bit to break off render 😂

[@TheWanderingMason]

Get a new blade, put a thin amount of olive oil on it and when you clean it, submerge the blade (more water)

[@lmilne4859]

Always fix them into the brick buddy. Far better fixing as to soft like lime mortar mix.

[@JimJimpmjj]

Yeah I'm surprised it's going into the mortar joints? I always go into the brick. Same rule for fixing downpipe guttering clips always go into the brick.. That's how I understand it. Only thing I can think of is maybe because he's so close to the corner of the brick he doesn't want the chance of blowing the brick out?

[@CharlieCollison]

Fair point 👌

[@lmilne4859]

@@CharlieCollison Had 1 of these for years now. 12ah batts a must on these unless have a few 9ah for change overs. The whisk it’s self get yourself 200mm refina whisk. Knock up quicker than with the standard 150-160 dewalt 1 they supply. Whisk in bucket first with water or be nightmare trying fight back to bottom of bucket. Good thing dealwt will stop if under strew or getting bogged down. Refina nice big 120L Charlie but more expensive they last like a hard plastic rubber type material white clear see through don’t get the black 1,s. Hope Amy and kids are buddy. 🤙🤙😎

[@dazza9448]

I would always ask the bricklayers at around 3:30pm if they need one more gauge. They would almost certainly say yes every time And I’d be putting 3 quarters of a gauge either in the skip or trying to hide it around the site because they didn’t fucking use it all!!!🤣

[@duncanbradshaw6504]

Id sa off ate mone8

[@Dave-st7yu]

That drill was on reverse 😂

[@scotty362100]

I've never seen anyone get as much muck on the ground as this guy! He just LOVES throwing away his profit, a quid at a time. LMFAO - and he worries about mixing up an extra half tub of muck at the end of the day and wasting it. There is at least a tubs worth on the ground and everything around the work area every single day.

[@chadickinson2748]

Your a ballbeg

[@CharlieCollison]

😂 ok mate thanks for the criticism

[@claytonsmith84]

I don't know how you keep your cool Charlie with comments from turds like that, great video that, really enjoyed watching that and I'm a builder 😅 take care fella

[@scotty362100]

@@claytonsmith84 Sometimes pointing out the obvious facts, makes us turds! keep on with your groupie mentality though, it suits you well.

[@HMPBruceLee]

Scotty is a cowboy builder or a 40 year old virgin. Go get laid fella

[@Orgakoyd]

Love the efficiency! I will be doing a timber frame base wall with 140mm blocks as my first ever brick/block work. Bit nervous about fucking it up, but will give it a go.

[@MrAlistair_]

Nice van set up

[@ДжанмыратАразов]

Уровень stabila???

[@grahamobrienverynicex9804]

Nice levels charl

[@richardstetson8221]

Have you ever used an actual mortar mixer in more than 20 years doing this the only thing I've ever used a bell mixer for is mixing concrete and we use the paddle mixer for small jobs like re pointing or replacing a few bricks

[@Joe74854]

Not in the soft joint Charlie in the brick mate ,,,, do you not cut cavity we get our nuts chewed off here fornot considering penetrating damp . Guess all specs are different but hey

[@philipjones4355]

Loved every minute of that,so satisfying to watch👍🏻

[@CharlieCollison]

Glad you enjoyed it mate 👌

[@alternativeopinion310]

Try getting out more

[@philipjones4355]

@@alternativeopinion310 Only if your paying!

[@SalomonX88]

Looks like Harwich Road 🧐

[@Martin-lk7uk]

Nice one Charlie master of organisation👏👏

[@CharlieCollison]

Thank you kindly👊🏻

[@zaheerali9663]

Who did I work with you

[@jeztickles4361]

😂 universal drill bit/breaker

[@andywest3260]

The good 3,4,5 trick work brilliantly

[@ravidhull1911]

Whats 3 4 5 trick work

[@CharlieCollison]

@@ravidhull1911to square a building

[@sanjay0196]

The posh name for it is a Pythagorean triple ( well that’s what google said anyway)

[@andywest3260]

@@ravidhull1911 hi the 345 trick is when you measure 300mm one way then 400mm The other way if is is right the two marks will make 500mm and that is a square corner

[@richardstetson8221]

We use 3ft 4ft 5ft but you could multiply it the bigger it is the more accurate the KZbin bricklayer Adam Hatch actually made a video were he did it but he went 3in 4in 5in when I told him how I do it he said wow that's really big but seriously who the hell does 3in 4in 5in he must have learned 3,4,5 that day and decided to make a video

[@lawrencecarlin4309]

Brilliant mate

[@alexsteele1632]

Thanks for the vids Charlie boi❤

[@CharlieCollison]

No worry’s mate trying to get back on it been working late away so been hard to get the time to edit 👍🏻

[@noelkenny7504]

Another great video Tom hope u and family are keeping well

[@noelkenny7504]

I mean Charlie

[@gerryallington5054]

Is this for real 😱😱😱😱😱

[@zaheerali9663]

Ser mera naam zaheer Ali hai kiya main Aap ke saath kaam kar sakta hun Ind❤

[@AlanCampell]

Chaps more times than a domino player

[@zulfqarali905]

Hi Charlie how are you doing today and the family are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall

[@iSk3ch]

Episode 2?

[@thomashinsley-zx5uf]

Is that a stabila level the black one ?

[@63flight]

Yes, limited edition....called dark shadow.

[@CharlieCollison]

Yes mate there lovely 👌

[@richardstetson8221]

That's cool too bad I still have a brand new yellow one that still has the plastic on it or I would buy a black one it's the same level 196-2 I'm still using the first one I bought like 7 years ago with the guards on it

[@NicholasPholi]

Creamy alright.

[@grahamobrienverynicex9804]

Yes been watching him charl .but you just pip the post .

[@CharlieCollison]

You say that to everyone 😂

[@Shib-ok9hk]

Hi Charlie, how come no 100mm slithers on the corners?

[@zxnksprayzz9956]

learning how to be a bricky

[@CharlieCollison]

Get stuck in 👊🏻

[@KayDoherty-e5p]

Is Tom still working for you

[@CharlieCollison]

Yes mate he’s on price now been doing really well 👌

[@grahamobrienverynicex9804]

Dies a goid mix thow

[@markmaddison5312]

@@grahamobrienverynicex9804 please translate to English

[@CharlieCollison]

@@markmaddison5312does a good mix though I reckon 😂

[@kevinhalligan5283]

why don,t you ask one of the lads to hold your tape at the end for 1 minute..easier no?

[@CharlieCollison]

Yes it certainly is 😅

[@kevinhalligan5283]

are you being sarcy with that emoji young charles ,,hope the wind blows one of your walls down ..i don,t really😇 😅😁😂😄@@CharlieCollison

[@Rotciv1929]

Charlie how come you’re using a jag clamp and not a fitzbrick

[@CharlieCollison]

Romford mate 😂

[@AlexTankivgorode]

1🎉😊

[@charleyryans]

Packed up in couple of minutes 👍

[@silashall-andersen946]

1

[@grahamobrienverynicex9804]

Mixer is better and easyer

[@markmaddison5312]

@@grahamobrienverynicex9804 no mate I disagree with that not on a small job

[@CharlieCollison]

There’s pros and cons to them both but the pro out weigh the cons of a mixer i think 🤔

[@grahamobrienverynicex9804]

@@markmaddison5312 ok regards

[@grahamobrienverynicex9804]

@@CharlieCollison the best out there charl .dean watching you thow .

[@grahamobrienverynicex9804]

Lucky drain just outside charl

[@markmaddison5312]

Those rawlplugs are far too short

[@eamonmoore6134]

They come with the starter pack so they must be ok

[@CharlieCollison]

they come with the kit so let the manufacturer of the product now and i am sure they will adjust it to what you think 😊

[@markmaddison5312]

@@CharlieCollison yeah right, but what else would you expect,by the way Andy is over here in Oz and has an invite to go fishing with someone who went to school with your dad, my goodness it's a small world

[@JimJimpmjj]

Those blue plugs come with the starter kits. They come with blue plugs and A2 SS hex screws (50 or 55mm if I remember correctly) and washers. It's what the manufacturer provide.

[@brickrightbuildinglandscaping]

Funny you showed the paddle mixer was talking to someone today who was trying to convince me to use one .Great if your on your own .Tidy van aswell good to see 😂🙌👍

[@mattslade5196]

Charlie Charlie come on a masonry bit is for drilling not on hammer function 🤣🤣🤣

[@CharlieCollison]

@@mattslade5196 gotta use what I had available 😂

[@palxprince]

Mate the ending is justt wow🥹