“Andy’s shop, reasonably well-equipped” camera pans to show every conceivable weapon in Andy’s dojo 😂
@andybrook-dobson7263 ай бұрын
I’m an “enthusiastic hobbyist“!!! What can I say.
@ENCurtis3 ай бұрын
Haha like I said… reasonably well equipped 😂
@AyresHaxton3 ай бұрын
Serious tool envy over here!
@winfinit3 ай бұрын
I came here to drop a very similar comment: “reasonably well”? Haha
@Edd0304273 ай бұрын
Mate my shop is nowhere near 'reasonably' well equipped. I thought it was, now I need £50,000 more.
@MLSteffel3 ай бұрын
Thanks for walking through the process of bent lamination, the tapered pieces, and the half lap jointing! Well explained and easy to follow which makes for a great learning experience for those of us starting out. Always a pleasure to see your clever mind working through a design. Cheers!
@ENCurtis3 ай бұрын
Thanks! Glad it was helpful for you!
@Timber2ToothpicksАй бұрын
You really showed your stuff on this build is amazing. You got the goods. I am so impressed. I wish I was Andy. That is a wonderful wonderful time.
@ENCurtisАй бұрын
Thanks mate 👊
@andybrook-dobson726Ай бұрын
It was a fab week; we did go at it though. Worked hard and played hard!
@velvettedelaney3 ай бұрын
I would’ve never thought it made sense to spend 4.5 of the 5 days testing and planning! I would’ve been stressed that we wouldn’t get it done. Thanks for sharing the process of testing and planning. This helps my nerves calm down a bit when thinking about limited timeframes!😂
@ENCurtis3 ай бұрын
Sometimes all the planning pays off and it comes together quickly!
@leegould5306Ай бұрын
Reasonably well equipped 😮 ~ that’s the dream man cave for any woodworking hobbyist!
@mwoody45603 ай бұрын
This is one my favorite build videos.
@ENCurtis3 ай бұрын
Thank you!
@chipsterb49462 ай бұрын
@@ENCurtisexcellent tease for Patreon too. That’s not a criticism - we know *what* you did, we just don’t know how … and we want to!
@lmcori3 ай бұрын
Not shown are the 12 other poplar test half laps that ended in profanity and a burn pile… if this was in my shop. The tapered arcs look fantastic and the Gothic arch form that comes out after assembly is always pleasing. Nice work, fellas!
@andybrook-dobson7263 ай бұрын
I’m sure mine would have been similarly littered if Eric wasn’t in the room.
@ENCurtis3 ай бұрын
Haha the tests were mostly just to get that half lap right. Somehow it worked on the first attempt!
@ronboe63253 ай бұрын
This brings back, from decades ago; freshman sculpture class: Sculpture in the round. Well done!
@ENCurtis3 ай бұрын
Yessss!
@chrisbrockman81223 ай бұрын
As a carpenter / furniture maker myself I understand the reasons why you would do a mock up first. So many variables. Also the better quality would is also more expensive to make mistakes on. Keep up the great work guys 🤩
@ENCurtis3 ай бұрын
Thanks man 🤘
@chrisbrockman81223 ай бұрын
@@ENCurtis Your welcome i can appreciate the effort and attention you put into your work.
@thomastieffenbacherdocsava15493 ай бұрын
Great discussion of the make. Full scale drawing and mock up, definitely Old School! Great for those of us not using sketch up. LOL! more time spent in preparation than actual build is important in the Patience and Practice of the "P's" of woodworking. Joyful end!
@ENCurtis3 ай бұрын
Well said!
@leegould5306Ай бұрын
That truly is a thing of beauty ! Incredible.
@jimmcnett3 ай бұрын
I really like your design process. I wish I could replicate it. The coffee table is going to look amazing.
@ENCurtis3 ай бұрын
Thank you
@namanbriner4472 ай бұрын
Now you guys will have built 2 beautiful coffee tables, because the design is right and therefore the exact materials won’t matter quite as much. This was awesome. I feel the freedom to make possible mistakes on the prototype must help submit to the design process and let it flow. I love too that this process of prototyping and jig making would allow small scale production of a design. For keen hobby woodworkers this is a real insight into that world. What a joy to share knowledge and skills with someone who’s ready for it.
@l.clevelandmajor99312 ай бұрын
I'm with you on that. As a professional and a hobbyist, I enjoy being in both worlds. And how do you know when you are good at what you do? When customers ask for you by name to make what they want! Cheers!
@Bluuuz2 ай бұрын
Great to see you doing something like this in the UK. Really pleased to see you got to sample some of Scotland’s finest as well. Needless to say, the build was amazing
@jimrosson67023 ай бұрын
Wow I really love this table base it looks so amazing hope you show the finished product.🤞🏻🤞🏻🤞🏻and love how you guys worked together. Great video
@deadbungeejumper3 ай бұрын
Nice work guys. Complements to the original designer as well. It’s a great design. I love when I can approach someone’s “unassuming/simple” piece that then seems to come alive the more I engage with it.
@N_Breeze3 ай бұрын
Just learned about you on “The Old House Makers Channel” I love what it meant to you to craft for the two navy pilots and their daughter ..a beautiful story. I’m happy to be here 😎
@robertyack1661Ай бұрын
Loved it, thank you. I missed how you made the 7 to 5 mm laminations. Cant do that in a planer, obviously. What did i miss??
@michaelnorman56403 ай бұрын
Always amazing Eric you’re so talented !
@ENCurtis3 ай бұрын
Thanks so much!
@michaelnorman56403 ай бұрын
@@ENCurtis every time I type your name I phone spell check geez I’m sorry cuz (Erik) lol I do apologize!
@JoeFeser11 күн бұрын
Great Mario Reference in the video. Luigi is all the rage right now. :)
@golfer_by_weekend71953 ай бұрын
that was cool watching you guys work thru it.
@ENCurtis3 ай бұрын
Glad you enjoyed it 🤘
@Kernowwoods3 ай бұрын
That’s an exceptional set of table legs dude. Really enjoyed seeing the process. Welcome to the motherland by the way 🤙
@ENCurtis3 ай бұрын
Thank you my dude 🍻
@joeguilfoyle19222 ай бұрын
This is my 1st time watching one of your videos. What a great idea for a youtube channel. It could be a spin-off of your current channel. Just use the same title (for the new channel) as the title for the video. People can apply, you do a little research on their shops, experience, etc. and pick a winner for your new video/build. You can have your sponsors involved. I.E., If their shop needs a plainer, get Dewalt to donate one to them (in the video). Or Festool could give them a router ir track saw. It could be like a kinder, gentler version of "Kitchen Nightmares" but for wood projects and w/o the yelling and insults :-) Anyway, great video!
@tenedar252 ай бұрын
Hi Erik, Thanks for sharing this video! Could you explain what tool and what type of jig you used to create the tapered laminations?
@russellobeidzinski5472Ай бұрын
would be nice to make a flat diamond out of it and top it with either and oval or diamond glass. The piece is stunning and very well made, thank you.
@nfarquhar2 ай бұрын
Wow... that is next level complex and beautiful! stunning, where can I see the finished build! 😞
@michaelcox10713 ай бұрын
That was fun. I'm gonna go make something.
@ENCurtis3 ай бұрын
Atta boy 🤌
@iwriteonshit2 ай бұрын
I love when a good KZbin video hits with a heavy dose of inspiration.
@donesry29023 ай бұрын
Thanks! That’s an inspiring video. But I have way more questions about it. You attempted to answer how you made the little jig to cut the half laps but I still have questions there. But I love the design and the inspiration
@remiavard77093 ай бұрын
WOW amazing piece !!!
@ENCurtis3 ай бұрын
She turned out lovely!
@egbluesuede12202 ай бұрын
looks like a lot of fun!
@chezcotton3 ай бұрын
Welcome to the U.K. It’s very weird too see you in a different workshop but nice to have you here. Whereabouts are you?
@ENCurtis3 ай бұрын
Thanks mate. I was in Yorkshire.
@zionosphere3 ай бұрын
That is a great design. You have a great eye for detailing in a 3D space. Thank you for showing the design process. If you were to go further with it, would you add more texturing to the legs, perhaps a curving taper from a spokeshave? I'm not sure if it actually needs any more to play with the light.
@andybrook-dobson7263 ай бұрын
I’m currently “feathering in” the apex at the feet so that joint looks more pleasing. The original piece is square so those facets are symmetrical, however our one is rectangular so asymmetric
@zionosphere3 ай бұрын
@@andybrook-dobson726 This sounds wonderful. I hope you share your finished piece so we can all marvel at it again.
@andybrook-dobson7263 ай бұрын
@@zionospherewill certainly try. I’ll be sending finished photos to Erik so he’ll probably have to publish them. Not sure how I would share them otherwise (unless you’ve got suggestions)
@zionosphere3 ай бұрын
@@andybrook-dobson726 Finished photos for interest. You could do a walk around video on your channel for him to link/shout out to.
@GaryThomsonJoinery2 ай бұрын
Thanks for sharing, looked really good 😊 is there a part two? 👍🪚📐🔨😊
@DaddyBooneDon3 ай бұрын
It's cool. It's like cathedral arches. I really like it.
@CinkSVideo3 ай бұрын
That is a sexy table. So much dynamic movement in the curves and tapers.
@ENCurtis3 ай бұрын
Thank you!
@youtubuzr2 ай бұрын
A 'hobbyist's' shop w/about 100K in equipment in it... :D It's looking great, I can't wait to see the finished piece, along w/the rest of the process!
@chou-fleur-academy2 ай бұрын
gorgeous!
@mortenheide11643 ай бұрын
Awesome build! Makes me want to try bent lams as well😊 I think shop quality has been hit by inflation as well, when a high ceiling space filled with incra, bessey, woodpecker and festool is “reasonably well equipped” though😂
@ENCurtis3 ай бұрын
Bahahaha hey in fairness the ceilings were only about 7’10” so sheet goods are a bit of a hassle 😂
@andybrook-dobson7263 ай бұрын
Hey, you left out Lie Nielsen, Bridge City, Blue Spruce, Clifton & HNT Gordon
@StrifeCJ2 ай бұрын
I got a question from an inexperienced woodworker pov. To my view it seems this project spent as much money on wood to make forms and jigs as they did spend on the finished woods. Is this a normal and regular thing for to fine furnature making?
@glencrandall70512 ай бұрын
Well done. I am entertained. I am educated,🙂🙂
@AlexKall2 ай бұрын
Very nice table!
@tommoeller71493 ай бұрын
Totally cool!
@williammaxwell19193 ай бұрын
As soon as you mentioned breaking out cardboard for a design mock-up, I was reminded of von Clausewitz's quip "The only scale to build a model is 1 to 1"
@williammaxwell19193 ай бұрын
& then you took it to the next level by building the 1 to 1 model out of poplar! Kudos to you guys.
@Cooper_422 ай бұрын
Yep, CAD. Cardboard Aided Design
@mikec84513 ай бұрын
Awesome built - high class furniture building at it’s best, you showed once again that building furniture is way more than just a box
@ENCurtis3 ай бұрын
Thank you sir 👊
@AM-hm5eq2 ай бұрын
And I thought creating a box was a great thing. Mind blown - awesome.
@KiwiSkipper2 ай бұрын
Gorgeous shape !!
@grbroussard2 ай бұрын
Awesome!
@jasondoust49353 ай бұрын
Bloody awful accent! Joyous set of table legs, though... Well done, gentlemen. The things that look simple are so often the most difficult to execute, as there is nowhere to hide a mistake. I love the tapered laminations. They create a geometry reminiscent of a brushstroke in ink. Your eye can't rest on them. That graceful sculptural motion and fluidity with those crisp edges and junctions is so pleasing. Bravo. You've demonstrated how style outlives fashion. Take a bow.
@ENCurtis3 ай бұрын
Exactly why I prefer a tapered line! A brush stroke is a great way to describe it though. Glad you enjoyed the build!
@MrAnimal19712 ай бұрын
Industrial design covers all of the design and build delemmas before going into the final product. It's well woth the time and money. Poplar is a wonderful material and one I use frequently. Most people want a " look" but not the price. This is where years of expirience in finishing techniques come into play.
@SuperMcgenius2 ай бұрын
Yes to mock ups. 👍
@aaronblackford9813 ай бұрын
Beautiful design
@ENCurtis3 ай бұрын
Thank you! Cheers!
@NatoPellecchia2 ай бұрын
I like poplar it’s a beautiful wood too 😞 you are an amazing craftsman I just wanted to ask what why don’t you like building tables out Of it
@jb5102 ай бұрын
Gorgous table. I'll admit I still don't understand doing it in poplar first, rather than just being prepared to redo it in ash if something goes wrong. The price diff on poplar vs ash isn't doesn't seem big enough to warrant the poplar tests.
@jassman1Ай бұрын
Prep and planning prevents pi55 poor performance… Well done on the design aspect, looks superb. How ever that Hobbyist work shop is not so, looks like a Pro Black Hat from a building site with a man cave ! I am sure he knows what I mean ! 🤣🤣
@TimJavins3 ай бұрын
1:10 That's some fairly interesting footage of two glasses resting on a table.
@ENCurtis3 ай бұрын
Fairly interesting critique.
@238samurai3 ай бұрын
I thought we were getting trolled since there are two unused coasters next to them.
@howarddavies37442 ай бұрын
Yet again, workshop envy.
@Hog-g2z3 ай бұрын
Good morning 🌅, GB , That is going to be a great table design, I have made some curved design furniture, many years ago, I was involved in starting off as a help for fitting a spiral staircase handrail, the contract went pear-shaped, the company that I’ve made all the components had made the handrail flat, So when you laid the component onto the steel metal railing that I was supposed to be setting into the underside of the handrail didn’t fit, because the handrail are supposed to be machined or made into a helix, 🧬, This is where like what you were doing making cardboard templates to make sure the ark is correct, I placed pieces of cardboard about 3 foot in length one on top of the handrail and then corresponding on the side, part of the problem the metal work wasn’t 100%, carpool templates took me nearly 3 days to make, and took me six weeks to make and fit all the handrail. It was approximately 4 inches in diameter., Then about three months later, I got a call from the people that had given me the contract, saying would I be interested in doing another handrail?, This one is a little bit bigger., 3 1/2 flights, This took me just over three months, if I remember rightly this was in Selwin Gardens in Cambridge, not sure if I spelt that right, I’m now retired in my 70s , and I still wish I was back at work, I missed the challenge, Keep up the great work , it is a big learning curve, 😂,
@TCGE083 ай бұрын
Beautiful work! Jigs like that lend themselves to making more of those tables…
@andybrook-dobson7263 ай бұрын
I have been thinking that. Need to get this one finished off first though.
@ENCurtis3 ай бұрын
Couldn’t agree more!
@tonyokello71082 ай бұрын
During the design process I got distracted by Andy's shop the shop has great flow and clean layout. The table design you've simplified it enough for us to believe even newbs can hack but we all know that it's easier on video than actual😬
@kaduseus593Ай бұрын
There's steam bending, heat bending, wet bending, urea bending, ammonia bending, green bending, so why would you dry bend?
@Thatusernameisnotavailable.2 ай бұрын
looks so cool with his safety glasses on his head most of the video. I personally think that says a lot. Probably need to check yo self.
@elibeeblebrox10842 ай бұрын
I've got perfectly stylish safety squints for most of my tools, thanks
@heruvey872 ай бұрын
brabo, i cant fathom doing this type of work yet.
@sackville_bagginsess3 ай бұрын
Andy laying in bed thinking about "reasonably well"
@andybrook-dobson7263 ай бұрын
Yeh; what am I missing?!?! Comments below 😂
@ENCurtis3 ай бұрын
😂😂😂
@bladerunner65832 ай бұрын
Wait! What happened to 'rectangular'? That looks kinda square.... Does look good, tho, sweet vid, too!
@joebass53 ай бұрын
Ok, please create the cool version a tv show about woodworking where you create using famous and not so famous techniques and people. ( I’m sure April Wilkerson would help) Commenters, please like this comment so he’ll do this.
@ENCurtis3 ай бұрын
I dig this idea. I’ll pitch it to April 🤘
@grahambeech-w4j3 ай бұрын
Heath Robinson is the English equivalent of your Rube Goldberg always learn something new from your videos
@ENCurtis3 ай бұрын
Apparently so do I! 😂
@BigPunisher-hl2th21 күн бұрын
Man, you don’t look like you drink but you are definitely someone I could have a beer with lol.
@andybrook-dobson72618 күн бұрын
He drinks!
@gerarddelmonte87763 ай бұрын
" Without scrap, it's crap". i.e., without a prototype, the chances of screwing up expensive wood on the actual piece is high. Digging that half-lap jig, BTW.
@ENCurtis3 ай бұрын
Thanks mate. And a fair saying too!
@joelw62153 ай бұрын
Well done sir
@ENCurtis3 ай бұрын
Thank you 👊
@terrytopliss95063 ай бұрын
The accent wasn’t that bad Erik,I’m still taking in what you both just achieved in the video.👍👍👍
@ENCurtis3 ай бұрын
Hahaha I appreciate that encouragement
@andybrook-dobson7263 ай бұрын
Please don’t encourage him!
@frankdesantis4523 ай бұрын
Best Australian accent ever
@alanhill6974Ай бұрын
I'd love to have you in my 2/3 single garage "workshop" in West Yorkshire - Andy's was palatial in comparison to most British hobbyists :-)
@andybrook-dobson726Ай бұрын
I’m not far away; near York
@alanhill6974Ай бұрын
@@andybrook-dobson726 Ah cool, I'm in West Leeds. Great setup you've got there, makes my 2/3 garage very jealous :-) Good video though, the effect of the bent legs was great
@TheSMEAC7 күн бұрын
“Reasonably well equipped…” 😂🤦🏼♂️
@1deerndingo3 ай бұрын
Very cool
@ENCurtis3 ай бұрын
Thanks!
@branchandfoundry5602 ай бұрын
Fwiw 5:8 ratio is the Golden Ratio (1:1.618). 8 divided by 5 is 1.6.
@Motown2222 ай бұрын
X wants one of those tables for their foyer
@disklamer2 ай бұрын
So, a 4K coffeetable ;)
@SkyeWalkerJediDog2 ай бұрын
That's a gorgeous Peter Hall table! I got my own photo when I saw it on display a few years ago at his workshop in Staveley, nr Kendal. The curves are caprivating. I loved the halving joints you made look so easy and also recognise the machined mounts for the glass top 👌 Good job so far and nice to see you've been respectful and added you own twist with the taper. 👌👌
@andybrook-dobson7262 ай бұрын
And the lamination. Also, Peter Hall’s are no longer in business unfortunately 😢
@hawleyw616 күн бұрын
Hmmn thought it was a Michael Fortune.
@andybrook-dobson72616 күн бұрын
@@hawleyw6 he might have done but I've never seen it.
@petrsulek13102 ай бұрын
I have considered myself hobbyist, however, my workshop tools are nowhere near. I need to work harder 💪
@han5k22 ай бұрын
:12 never sneak up on someone with a machine running!
@ChrisHornberger3 ай бұрын
"Reasonably well equipped..." uh huh. lol :)
@humansnotai491216 күн бұрын
The owner of this channel pointed out that my original comment. was pretty unkind. I would like to make a public apology and I realise that he is doing great work. Happy Christmas / Thanksgiving and keep your channel going, I wish you all the luck in the world.
@andybrook-dobson7268 күн бұрын
so what's a KZbinr without a KZbin channel and doesn't make things to sell?
@humansnotai49122 күн бұрын
@@andybrook-dobson726 Apologies for my comment, it was not nice. I will amend it. You're doing great work. Namaste x
@ianpearse44803 ай бұрын
Wow.
@hawleyw616 күн бұрын
I understand that you started with a big disclaimer about this design not really being yours/ it’s a learning exercise for my friend/ he saw this cool piece and I’m just helping him learn but….. why not give actual credit to the designer of the original piece by using their name? It would have been simple, to have said “my friend saw this really cool piece by , you should go check out their work, and wanted to understand how you’d go about fabricating it”
@andybrook-dobson72616 күн бұрын
It was a Peter Hall & Sons design; they went out of business a number of years ago, hence us not making that reference. We also varied that design rather than make a direct copy.
@H60Gamer2 ай бұрын
All those coasters on the table and not one was used 😅
@chrisvanderwielen15302 ай бұрын
Looking at Andy's drill press station, Andy watches Denis from Hooked on Wood...
@andybrook-dobson7262 ай бұрын
That I do, I like Dennis' stuff; still got more draws to build and fit the fronts, made a few mods though - built the frames out of reclaimed pine rather than plywood
@chrisvanderwielen15302 ай бұрын
@@andybrook-dobson726 Yeah, I'm impressed by his precision, as well as his eye for design. I just wish that colored MDF was easier to come by over here in the states.
@andybrook-dobson7262 ай бұрын
@@chrisvanderwielen1530 It seems to be a lot cheaper in Belgium than it is here. The only thing I've found that's similar is a product called Valcromat; it's HDF rather than MDF, heavy & quite expensive!
@chrisvanderwielen15302 ай бұрын
@@andybrook-dobson726 Yeah, I can only find one place for it, and it's across state lines...about a 4 hour drive. Sure as heck dont want to pay for shipping on that(those), so would probably make a roadtrip out of it, if I were to get some.
@christiandestefano99972 ай бұрын
🤘❤
@NoOne-fe3gc2 ай бұрын
I thought you had to steam wood to make it bend like that with no breakage... the more you know
@rickh1292 ай бұрын
I see a nova viking
@newoldfashionedwoodworks65843 ай бұрын
Yo dawg, your arms lookin thicc af. Keep up the good work. 💪🏻💪🏻💪🏻
@ENCurtis3 ай бұрын
Haha thanks my dude
@davidgiesfeldt66502 ай бұрын
Cathedral ceiling
@markryan12583 ай бұрын
It’s giving lord of the rings elvish furniture vibes
@ENCurtis3 ай бұрын
The nerd in me love that.
@pinkeye002 ай бұрын
I think Andy has a better than equipted shop. He's probably either super rich, or a cosplay woodworker posing as a real woodworker. Oh wait ..
@NoOne-fe3gc2 ай бұрын
Ahhh imperial measures.. "a heavy 1/4 inch"
@1pcfred2 ай бұрын
The modern inch that's precisely 2.54 centimeters is not the Imperial inch. The old Imperial inch was two millionths shorter. the inch in use today is the International Industrial Standard Inch. But you can just call it Standard for short. Fun Fact the archaic US Customary inch was 3 millionths longer than Standard is. So there was a 5 millionths difference between old Imperial and old US Customary. They never were the same. But we all do use the same inch now. Another fun fact US Customary actually predates the Imperial system. US Customary was developed 32 years before Imperial was. So America never used the Imperial system, ever.
@NoOne-fe3gc2 ай бұрын
@@1pcfred hu....*weird knowledge increased* thank for the info! The more you know.
@nialstewart82633 ай бұрын
An inspiring build 👍 How do you know Andy? You should have explained how you ended up in his workshop.
@andybrook-dobson7263 ай бұрын
kidnap! As you can see he responded well to the hostage situation and clear evidence of Stockholm Syndrome towards the end
@nialstewart82633 ай бұрын
@@andybrook-dobson726 Patreon competition?
@Zerocool-kb4ejАй бұрын
Dick van Dijk was Dutch
@l.clevelandmajor99312 ай бұрын
Was that a Bosch Jigsaw I saw you using in this project. In my experience no other brand can even compare. I have one myself, and it is part of my professional secret of how I do such excellent work for my customers. I have tried many other jigsaws, and none of them work as smoothly as a Bosch. I used to amaze my bosses when they watched me make specialized cuts so accurately that you do not need much filler to fill in gaps. Most of my cuts need none at all. Try fitting a wall edge to the inside contours of a commuter bus. With my Bosch Jigsaw and my steady hands, I can. Knowing how to draw the shape on the wood to be cut is just the first step, and for that I use my prodigious art skills, and special designed and made by me drawing tools. One of my bosses wanted to see what would happen if he shook the piece as I was making a cut. As soon as he did, I removed my hand from the saw instantly. With no finger on the trigger, it instantly stopped. I turned to him and asked "What are you doing?" He said "Testing you." I said "Don't do that again. It's dangerous." I then told him, "It's lucky I have that kind of reflexive reaction to such things. Otherwise I might have been injured, and you might have also!" He replied "Your number one rule is always work safely!" "Yes!" I said. "Always use every safety measure available on any job!" I then finished the cut, keeping my blade right on the pencil line.
@d7samurai2 ай бұрын
that's a hobbyist's shop?
@Sparky65472 ай бұрын
I've seen pro shops that don't have that nice or fancy of tools and equipment. Not a hobby shop for sure
@joelw62153 ай бұрын
I like fractions. ‘MERICA
@ENCurtis3 ай бұрын
Honestly. Took my a solid 3 days to get in the flow of metric.