JXD 509w Pioneer UFO Wifi FPV Review & Flight (Gearbest)

[@MrSam1951]

I got my grandson the pioneer ufo fpv 5.8 g for chirstmas can you point me to the right place to get a larger battery that I know will fit an have the right hook up for him.

[@JohnVHRC]

Good job, Ive had fun with mine.

[@AlbertKimTV]

Thanks. I've had better luck with this one than the JJRC model. I could not get the video to work right on that one. I may revisit it and open it up to see if anything is wrong inside it.

[@rohanphoolchand7333]

@@AlbertKimTV bro the people from whom I bought this scammed us! There are many things that we didn't get like the manual, the phone holder, ect

[@malcolmpritchard2095]

Is there any way of knowing when the battery is fully charged. ?

[@AlbertKimTV]

I think that is documented in the manual. I think the light on the charger goes off when it's done.

[@joshuaelan2029]

Albert Kim the light will on if it is done.

[@daytrading5456]

Can't "connect" or "boundup" my iphone to the drone. App is downloaded... what do you mean by "bound up". How do you connect so the video works?

[@AlbertKimTV]

You have to connect to the wifi of the drone first before launching the app. Did you do that?

[@AlbertBowdenOfficial]

Just started using this again today in my house. Have to have a drone licence to go outside now cause of new uk laws :(

[@kimli381]

How do you charge xxD, and also mine had a black wire with a kind of circular point and none of the wires given seems to fit, and ALSO it didnt give me the phone clip and instead they gave me a tablet like thing... help?????!!!!

[@AlbertKimTV]

+Kim Li it should have come with a charger. I would contact the place you bought it from

[@kimli381]

Albert Kim thx it DID came with a charger, BUT the camera doesn't work and my drone keeps drifting right whenever i try to use it

[@Randy-le6ub]

Kim Li I never got the WiFi signal from mine

[@scottlarocc4781]

how the hell do take the battery out , you just barley pulled it mine won't come out I'm going crazy !

[@AlbertKimTV]

check that the battery isn't snagged on something around the bay. It should not be that stuck!

[@scottlarocc4781]

Albert Kim ok I'm checking right now could you think how I should go about problem solving that like take it apart ?

[@scottlarocc4781]

Albert Kim there's a Lil latch tab type right under the battery am I supposed to hit that

[@scottlarocc4781]

Albert Kim I keep pulling it won't budge bro I don't get it

[@AlbertKimTV]

It has to be snagged on something in there. I'm not sure what. Sorry I'm not sure what it could be.

[@EmilZ-wb5kr]

So there's an app to DL on your tablet/smartphone and you have FPV? Also what fps does the camera rec on?

[@AlbertKimTV]

Yes, the app should be mentioned in the video. The fps is 25.

[@EmilZ-wb5kr]

Any option for 480p on higher fps? wide angle?

[@AlbertKimTV]

none I am aware of

[@benjaminarias1965]

It has return to home or headless mode?

[@maximiliannur1277]

Who can I find the app? to control the Pioneer?

[@Kuydj]

Wie viel Ampere hat der Akku?

[@alioztel7817]

Which charger? JST? PLS

[@stephennogare]

yes

[@themikeymikechannel2947]

Wish someone knew how to switch out the lens for a cell phone lens instead of a crap lens that it came with?!.

[@abdullahmohamed1991]

How to do you connect wifi

[@Randy-le6ub]

I’m having the same problem

[@lukanikabadze631]

where is a usd card in pioneer ufo drone

[@Randy-le6ub]

Some of them has no sd card sllt

[@MrGlobaldave1]

Hello Albert Kim,I noticed you commented to John VHRC "I've had better luck with this one than the JJRC model". Not sure what model but my story below: I purchased the JJRC-H11WH from a seller on Ebay(Tomorrohome/TomTop). The device has not been operating correctly. That seller probably not going to issue a full refund but I'm asking them to give me a discount on this JXD 509W. Camera is not attached & battery is FULLY CHARGED ( 4.2 volts)on below description of problems:I have also posted a short Video on KZbin showing the binding problem. JJRCH11WH Problems When I finally get it to bind -The quad will fly, then I will perform one flip. Lights start flashing and not able to flip again. I can still fly it and then land. It will NOT restart? I will rebind, press start/stop button - it starts, then shuts down. Fly the quad then push start/stop to land. Quad lands, stops. Cannot restart to take off again? Another test - bind, start. While in “idle” I will turn lights off. Quad shuts down? Another test - start, fly (about 15 ft up) perform 360 rotation(not flip) , quad will start to slow down and land? Tested the battery after performing these various 3 minute tests - 3.7 to 3.8 volts My conclusion is maybe there is a defect in the circuit board “sensing“ the battery voltage ?? Hoping this JXD 509W replacement works out.