W 400 L-V WBX IWATA SEALER GUN

[@PaintSociety]

One of the best guns. Works great for everything

[@kandyman5315]

Very nice gun

[@tonydiesel3444]

W400 is great for everything even base at a little bit lower pressure it is way better than the lph400 for clear and sealer and primer the only time the lph400 works better is at base spraying

[@tonydiesel3444]

The version of the w400 that you really want is the lv4 maybe in a 1.4 tip so it is great for everything all Automotive coatings even heavy clears the lv4 has the Tulip tip with the three slots and is a lvlp

[@dredfxcustompaint]

Iwata make some cracking guns and airbrushes great video nice slick finish 👌

[@kennycharneca1]

please do more videos about this gun

[@damincobozeman4114]

Beautiful work Love the gun. Now I got to buy 1. I already have the the other for clear coating. Love the way u teach keep dropping them fire videos and I'm keep watch and learning!

[@tonydiesel3444]

It works fine for pearls as well

[@davidharrison8397]

That turned out nice....I like my w400 bellaria ....might have to grab one of these now.

[@kandyman5315]

Sprays real nice

[@jamessakimae9655]

Finally happened to come across the data sheet for this gun and it's just the w400 LV4 rebranded everything is identical in both data sheets, why it's marketed in the US as WBX but for sealer idk. Definitely sprays great with a lower fluid consumption than the bellairia, but just differs so vastly from the actual gold cap w400 WBX models in Asia and Europe, would love to see more videos of this gun out there

[@kandyman5315]

It's compliant in the US that's probably the difference paid for the legal rights.

[@jamessakimae9655]

@@kandyman5315 yes that's one difference along with the other model having much larger fan and puts out a bit more material

[@mikoajkopernik7664]

​@@kandyman5315 Hi , how you set for lph-400 ? Full open and what pressure ?

[@AA_Ron155]

The wbx cap is the same design everywhere, it also seems to be the same tech/design as the lvx cap with uniform droplet size advertised and when I swap caps on my wbx it sprays exactly the same to me. The difference is the US model red cap is approved by the US EPA to spray at 20 psi and 20psi is marked on the cap for compliant use. In the rest of the world 2bar or 29 psi is the recommended pressure for the finer atomization. The more pressure the more fluid is pulled out of the cup and the higher ml/min rating on the tech sheets.

[@JDSpeaks]

Laid it down real nice. Was that pressure around 20 on the clear also?

[@kandyman5315]

I bump it up to 23 for the clear .

[@scottherr642]

Awesome high solids clear gun as well.

[@kandyman5315]

Thanks for the support

[@MatthewScott]

Nice. Love my lph400. I have used a 2.0 airgunsa for primer and sealer. But mixing the primer as a sealer I find it much thinner at 4:1:2 so I'm wishing maybe I had a 1.4/1.6 in the gunsa. I refuse to use the lph for that nasty sealer.

[@kandyman5315]

👍

[@tonydiesel3444]

W400 4 clear #1

[@rockotaco2201]

Great gun! My dedicated sealer gun.

[@kandyman5315]

It sprays great

[@Kaabosurron]

Looks great and great tips

[@kandyman5315]

👍

[@deanbrown7643]

Awesome gun awesome job pleasure to watch 😁😁😁

[@kandyman5315]

Very nice gun only thing I don't Iike is it isn't chrome plated

[@sashashepetyuk7279]

На сколько подача материала откручена при покраске лаком?

[@justice5699]

Hope your doing great man. I have been following you for a while now just absorbing your content. I just bought the exact same gun and I'm getting it into the PPS 2.0 system but I don't know the adapter for it. Can you please tell me the part number for it knowing that your on the 2.0 system? Thanks a bunch.

[@kandyman5315]

S2c

[@KillerJackRabbits]

Hey Kandy Man, would you recommend the 1.4 needle for Nason Sealer? Nason is all I ever used and it seems to be a really thin sealer, was thinking the 1.2 needle may be better, your thoughts? I currently use a Tekna pro lite to spray my sealer with a 1.3 but dang it always seems so "peel'y" to me. And if the sealer is peel'y then my whole job is coming out with Orange Peel, trying to kick that.

[@kandyman5315]

1.2 would work better for that sealer but you could use a 1.4 and turn in the fluid as well.hope this helps

[@DentFreeImagePeterVega]

Great results! Do you think this gun will also be good for base coat and single stage paint? I’m looking at getting it with the 1.3 tip.

[@kandyman5315]

Yes it would work great

[@AA_Ron155]

1.4 is better for single stage imo. I have had to reduce 50+ percent solids single stage to get the fluid output, that I can spray with the 1.4 without reduction. With Ms products it doesn't matter.

[@dawnbaker4589]

Good vid sir.i have a bellaria 400 wbx what is the difference

[@kandyman5315]

Not sure this is a lv wbx.

[@costask823]

I currently use the GPG with a 1.8 or 2.0 for high build k38 mostly, and 1.4 for epoxy/sealer DPLF mostly. Does the WBX lay the sealer smoother than the GPG and if yes which one do you think is smoother the WBX or the LPH with the orange cap? I am not interested in the base coat/clear coat aspects of these guns or the looks. Thank you for your content knowledge and expertise.

[@kandyman5315]

Lph400

[@costask823]

Thank you.

[@Kaabosurron]

You should try the lph400 lvx

[@kandyman5315]

Might be my next one to check out sprayed one years ago but wasn't mine

[@camerongrady4644]

yes i agree the lph400 1.4 orange cap is a awesome gun,looks killer great work mate

[@MatthewScott]

I have the 1.3 orange cap lph. Do it!

[@kennycharneca1]

what are your settings for this gun with the clear coat

[@kandyman5315]

25 psi full fan .pull trigger.turn knob till you feel it hit and stop for the fluid. 👍

[@kennycharneca1]

Thanks for the fast reply you got a new subscriber, I do everything with the 1.3 tip because I paint cars once in a while and I cant afford to buy guns for different applications I am very inconsistent with this gun sometimes I paint great and sometimes I get the worts orange peel possible.

[@kandyman5315]

Gun time that's what its all about 👍

[@bluestripes1]

I cant decide between this gun and the LPH400LVX

[@kandyman5315]

Funny you say that I was just talking about this today I would go with the lph 400lvx because of the chrome plating. The other one is not chrome and dulls out to a ugly finish.they both spray great

[@bluestripes1]

@@kandyman5315 Thanks!! Have you checked out the Wider4L-V14? Looks like LPH400LV4 silver cap but $200 cheaper?

[@kandyman5315]

No I have not I have to use. Compliant guns not sure if those cheaper ones are wish they were.

[@jamessakimae9655]

@@bluestripes1 I owned the wider 4L for a month and yes its nothing more than an LPH with a LV4 cap a cheaper price if you compare the data sheets they're identical

[@3rekoatskustoms929]

I have that same gun but have not used it yet. But I wanted to know when using a primer and sealer which one do you use first?

[@kandyman5315]

Primer is first over repair then sand and seal .sealer before base coat sealer is not sanded wet on wet let flase off then move to paint of your choice

[@3rekoatskustoms929]

@@kandyman5315 What if it's done in reverse I'm just curious?

[@kandyman5315]

Then you would have to sand in between sealer is thinner than primer that's the difference between them primer you have to sand sealer you don't as long as it's in the recoat window

[@3rekoatskustoms929]

@@kandyman5315 thanks Kandy Man

[@emilianorodriguez4375]

Where do you get the adapter for the 3m cup?

[@kandyman5315]

3m rep.

[@emiliorodriguez3418]

@@kandyman5315 what website do u buy your Iwata from, I had bought mine from Houseof1000kolors. Any other websites you recommend?

[@kandyman5315]

I get them local paint store or on Amazon.

[@Mike-qo4kp]

Wow...

[@tonydiesel3444]

1 # Clear 20 + years 4 me