CHEAP Carbon Shaft/ But What Does It Play Like?

[@alucardx1234]

Would be interesting to see a part 2 video with a proper tip and deflection measurements.

[@KarlBoyesPoolLife]

Agree 😀🤙🏼

[@iimiboy]

@@alucardx1234 used mine today for 3 hours of play, perfectly straight shaft, shoots very good but it's nowhere near ld like a z2 or z3 or even a 314³. Definitely has power even with the stock tip which looks like decent quality and very similar to an Everest. I was able to do a full table draw or screw comfortably but again if you are used to very low deflection this needs to be practiced with

[@WillieDines1]

​@@KarlBoyesPoolLife hey pal, it looks like the Temu shafts are being sold without having put through burnishing stage on the lathes to smoothen the surface and give them more of a slick finish. It works with wood shafts and so may work on the CF shaft too. Get a piece of blank printing paper, fold it over twice and then wrap it around the shaft and then repeatedly stroke the cue shaft through the printing paper, but gradually rotate the cue stick in your hand while doing this The printing paper acts as an extremely fine emery paper and should smoothen out and seal the surface of the shaft to make it much quieter and more slick like a brand new maple shaft. Unfortunately, having tried many layered tips, including Kamui, I didn't like any of them because they have a tendency to harden up fairly quickly, whereas I find that the old school Elkmaster and Triangle tips still do the job and are without any bs or hassle. Great video pal and have a great one 😎👍🍻

[@seiyulyu4854]

The main thing that is clear to me is that Karl shoots really well with any cue or shaft.

[@zanethind]

Yeah he's a pro it's not the cue it's the player

[@CFCseventy]

Yes I like his comments on the pool matches knows what he’s talking about and a top player

[@jasonparker6138]

Yeah he'd be fine with one of those graphite cues from the 90s. The original carbon shaft.

[@AntonioTrew]

​@@zanethindthe cue doesn't really factor in,it's usually the shaft and more importantly the tip..

[@zanethind]

@@AntonioTrew well the shaft and the tip is part of the cue so that's basically saying the cue itself matters but I get what you mean. But it's always the player. Don't get me wrong yes a good shaft and a good tip is definitely needed for sure

[@NSSB75]

I bought the same shaft from AliExpress. Tip was crap so I changed it. Deflection wise it is not that good. But now I use it as my break shaft. Taom tip on it and it breaks perfect. I owned a Cinergy, Revo and now I went to Mezz Ignite. The cheap shaft has nothing to do with a high end shaft. But as a break shaft you do nothing wrong. Keep your diet running Karl! Greetz Thomas

[@gorillaj131]

Bought the exact same I put a kamui sai tip on mine it works fine

[@dverschoor84]

I really like the Cynergy shaft.

[@jeremyowens4115]

How you liking that mezz? I'm considering one, currently using their sigma.

[@NSSB75]

@@jeremyowens4115 Oh funny, I started with the Sigma in 12.5mm and then got an Ignite to test it. I switched immideatly to the Ignite and I think I will never go back. But you have to have a decent stroke because of the 12.2mm diameter. And to be honest, it is expensive. But for me worth the price

[@llltrac9143]

@@jeremyowens4115 The Ignite a little bit heavy. I play with no weight bolt on my Mezz and it make my cue a little top heavy. I end up bought a 11.9mm Go Customs to use as my main and the Ignite as backup.

[@AntonioTrew]

Did you ever change the tip and have a go at it? Also have you tried it with a glove? If so does the glove help with the gritty graphite finish/sound ?

[@jellysideup]

I have several ok healing carbon shafts. You can get them customized many ways (white juma ferrule, various joint types, various tapers and lengths). M65 and M67 are incredible.

[@bikerrealengo]

First...thanks for this video....I have the same shaft and have a black ferule..as you said ..very dificult to aim and go near to the cue ball without touching it.. I take of the tip and put 3 white pads an a new tip...now I saw better when aiming....goid video 👍

[@farooqui24ify]

I bought mine from Aliexpress and I changed the tip to a kamui and it plays awesome.

[@jaynosowsky9708]

You could try wet sanding it with a high grade sand paper...see if it will help

[@R.J.McReady]

Not bad Karl for that money , good idea for some house cue shaft for when friends call over

[@KarlBoyesPoolLife]

Good idea

[@EhBitTV]

Question, did you get your Whyte carbon shaft brand new? or is this still the one you got from Fedor? Because typically all the carbon fiber shafts get glossier and darker as you play with it longer, a good example was FSR's What's in the Bag episode you did with him, his old shaft vs the new backup.

[@KarlBoyesPoolLife]

I got mine new and the finish is completely different to this Temu one

[@Caleb-mf3ko]

ok healing is a Chinese manufacturer that sells the unfinished tubes on their website. There's likely a few different people finishing and selling them with different ferrules and joints. This looks like a great shaft for any amateur cue makers that want carbon or don't want to turn their own shafts.

[@jamesosullivan4291]

What‘s the sandpaper block thing you used? Seems handy

[@poobum1966]

Looks like a sanding sponge, get them from a hardware store

[@zanethind]

My friend bought a OK Healing jump cue from Temu and he likes it he just changed the original tip because he didn't like it. Another friend of mine's bought his new cue set from a Temu I believe or similar like that and it's good and it works. For beginners that want carbon I'd recommend

[@tonyroberts8772]

Just bought one for myself to test against my Cuetec. It'll probably go onto my Preoaidre butt to be used as a break cue. I'll post the results somewhere.

[@lukepetro123]

What do you think?

[@olavodias]

I got a predator revo with a black ferrule... I hated that feature to a point where I end up selling it and got one with a white ferrule. It really makes it difficult for me to play. Maybe that is why they come with a yellow (or orange) tip on it lol

[@georgevaughn1884]

Thank you Karl for the demo and descriptions of the various feels on the pottings. Agree with you about the black ferrel!! This would be a nice option to provide for friends who stop by and wish to shoot with a carbon fiber shaft that I have adapted to one of my 2 piece cues.

[@jerryschuler6864]

I prefer the black ferrule myself. the white is almost distracting, but it's all personal preference.

[@TJKellyJr]

I've had my carbon fiber with black ferrule for 2+ years and I love it!! And I put a kamui black tip on it with the clear backing, looks sharp

[@garciasimms7849]

KARL IS THE WHYTE CARBON SHAFT THE BEST ONE TO BUY? PLEASE EXPLAIN YOUR OPINION........ ALSO WE NEED A WHAT'S IN THE BAG WITH FEDOR GORST

[@hawleyhawley2007]

Great video, keep them coming! This is my favourite channel for pool! Also, where is the Kik and Stik Tshirt from?? :)

[@hawleyhawley2007]

I’ve just found the link with the T-shirts haha! :)

[@KarlBoyesPoolLife]

Cool glad you found it

[@The-awakener]

Can you please try Rhino? A lot of people have been saying good things about it but never a video review.

[@Hannes123fly]

I own 2 rhino shafts. Deflection seems very comparable to a revo 11.8 with a 12.2 diameter. The standard tip is bad in my opinion, but with a how medium it plays great and does not have the tingy sound the older revos have.

[@kevintran1745]

@@The-awakener I personally say it’s closer to a cuetec in terms of playing in deflection rather then a revo having played with all 3 but it’s really solid. I will say you do feel grooves on the shaft with the smaller diameter tips for some strange reason. I own the Rhino break shaft and it’s silky smooth while 2 other friends who own a 11.8 and other 12.4 with the 11.8 having really strange grooves that goes around in a ring like pattern while the 12.4 not being as noticeable. It’s not the worse and it’s definitely a solid option if you do wish to buy it as a budget carbon

[@The-awakener]

@ awesome. Thanks for sharing this. Really helpful!

[@JerryLee..]

Bought one over a year ago of ebay. Bought it primarily to leave the cue the car from 10-95 deg F. Not a real LD cue, but just like any other shaft, it takes getting used to. Good video.

[@gadoraahmed4220]

how about its weight? does it have excess weight like other cheap CF shafts?

[@onnyt60]

Just put mine on the scale. 12.4 mm shaft weight is 116 grams and mypredator 314.3 is 120 grams so not much of a difference in my case.

[@gadoraahmed4220]

@@onnyt60 that's not bad at all, i played with a Crical CF shaft once and it's actually heavy. It's also a cheap shaft (600 AED ~ $190) for the whole cue, but I didn't like it. So i ordered this one from temu along with a break & jump cue and a case for a bit less than that lol just for now untill I can afford some decent equipment

[@Sneekser]

If you want it shiny...oil it. The carbon will absorb the oil...it actually is good for it too. Not too much...just some standard 3-1 oil. Put a few drops on a microfiber towel and put the shaft in a drill...just spin the shaft going up and down with a microfiber cloth for a few applications. Should shine right up and stay that way. Or you can tape the joints and spray with extremely thin coats of kbs clear right out of the spray can...just make sure its spinning and use very very light coats...it will give it a diamond hard...ultra shiny finish. Use it sparingly.

[@bernhardhnida3038]

use the outside cylinder surface of the tip to white it with white chalk. ore another soft white colour

[@garciasimms7849]

Please tell us about other shafts you have tested

[@loganunknown]

Thanks for the video, I wish you did a deflection test like Drdavebilliards does on his channel with your good cue as a control.

[@Rickbearcat]

I would estimate that this deflects at least an inch and a half using Dr. Dave's standard test.

[@bibelot8962]

Had to buy one from your review. I had to shape the tip with a forever tool, you're spot on, it feels good when using a tiger glove. Not jacoby black or cynergy smooth but decent enough that it makes me wonder if I didn't get robbed on other carbon fiber purchases ???? The power is definitely different, am going to say its hit is sub par but what a great economy buy.

[@xanh350]

It’s amazing how people are different. I myself much prefer the black ferrule. The white ferrule is distracting to me. My revo is black ferrule and when I order other CF I request a black ferrule I also like unshiny Matt finish so I’m going to order this lol 😅

[@xanh350]

I hate white ferrule so much… it’s same color as the cueball and sometimes I even foul using a white ferrule 😅

[@KarlBoyesPoolLife]

Wow that’s amazing and very true hahaha

[@xanh350]

@@KarlBoyesPoolLifemate can you give me the link for this specific shaft. I found other ones from okhealing which are white ferrule and I couldn’t find the 12.4 black ferrule uni loc. I searched the same name and can’t find it

[@WechaiMoua-ww3jw]

It needs to place the white ferral for it to make it easier for sighting.

[@attixoxo]

is it possible to change ferrule as well or only the tip?

[@KarlBoyesPoolLife]

You would need someone who is very skilled to do that

[@khaledali6784]

We have to admit that Karl funny personality has played key role to revive the sport again

[@aarondelrosario2492]

How do you make the shaft shiny?

[@anthonykeller5120]

Two things I really like about my Revo: 1) I’m a klutz and drop my cue quite often and there is no penalty for this with a carbon fiber shaft, and 2) the shaft is slicker than a greased pig, no glove, powder, etc. required. I do wear a glove here in the Philippines due to the really high humidity during the rainy season, although I could just wipe my hands and the shaft more oftern.

[@calm_candle_wick]

can you re-review this shaft after changing the tip to a kamui tip?

[@erictrombetta1828]

Thanks for this video! I just bought three of these. A break shaft a jump shaft and a shooting shaft. And have been looking everywhere for a review on these

[@Rickbearcat]

You aren't looking for a review. You are looking for someone to confirm your purchase.

[@kuyaking1813]

After watching this a couple of times, I ordered one for myself. Hopefully I'd like it. For those who is looking for a white ferulled one, you can check eagle king.

[@KarlBoyesPoolLife]

Hope you enjoy it!

[@kazaanggriawan]

Same shaft like mine but i have 11.8mm

[@juliomac8497]

I bought the break shaft then bought a complete cf cue from them. Idk what people are saying about defflection being bad. Only bad thing is the shooting cues tip and even then i been playing it just fine

[@grimace188]

You can put a ceramic coating on it. It will get rid of that sound and it will be smooth

[@KarlBoyesPoolLife]

Ok thanks 🤩

[@alexcollins1630]

I bought some off temu. Radial pin. $60. Plays pretty good

[@LetsTravelOurWorld]

Here is the deal. The pros, who get paid fairly well to endorse expensive shafts, do not want you to know many of these shafts are way overpriced. They don't want you to know that a fairly cheap shaft can actually play pretty well.

[@AntonioTrew]

​@@LetsTravelOurWorldIt's not that they don't want you to know it's mainly because they are oblivious to hype up their sponsors shafts..The player don't give a shit if you buy their sponsors shafts or not, because they still get their sponsorship no matter what. I have several friends that are sponsored by big brands like Meucci, Pechauer, Viking, Predator, Mezz, etc etc, and most of them will be blatantly honest if you actually talk to them...

[@LetsTravelOurWorld]

@@AntonioTrew that might be true, but I do think some of the pros care about if their endorsement of a product helps the company that is paying them. I have no doubt, I as I said in my comment, that many pros know these expensive shafts don't play any better than a lot of shafts that are not as expensive, they just put money ahead of morals. So we basically agree, with the details being slightly different. I have no doubt the top players, who started out playing with cheaper shafts know those shafts are almost as good, or as good, as the expensive shit they endorse. It would be hard for them not to know.

[@Chris-mu9us]

Also, do their Uniloc joints match predator’s QR Uniloc ?

[@joerogers9666]

Think it would work for breaking if you changed the tip?

[@asdvvvvf5381]

But is it wood just painted matte black ?

[@KarlBoyesPoolLife]

No it’s carbon

[@jamesflynn1970]

Got an ok healing shaft 9mm to play English eight ball. Less deflection than my peradon one piece. Did change tip to a kamui medium snooker.

[@Rickbearcat]

As an American, I have no idea what a "healing" shaft is. Can you explain that to me?

[@kevt2217]

Pretty much all carbon shafts from the top manufacturers have a matte finish, it gets glossier/darker the more you use it.

[@cristianchan314]

Yeah, I think only the whyte shafts are shinny.

[@procrastinator6902]

McDermott Defy comes with a shiny coated shaft that feels really sticky on the hand, I didn't like it at all when I tried it.

[@st13212]

@@procrastinator6902 Yeah, I didn't either. They said they made a new finish on the McDermott that made it better, but we will see.

[@Talkin-English_BSN]

Have to get yourself some calipers pal, temu shaft looks way bigger than 12.4! Great review tho and good if you pool halls want more durable house sticks

[@ramonsytb]

Hi Karl, great video, however you used a lot of 'not bad' in your video which makes me wondering if you preassumed the shaft will be 'bad', actually I think with that price, I'd use word 'better than I expected'. Can you justify the difference between the Whyte Carbon $600 and this $60 shaft? Do you think the difference is worth $540? That's probably what everybody's wondering. Recently a Vienam brand Rihno start poping in pool community and it looks like their $189 shaft is no better than this $60 one, would love to see you do a comparison video too!

[@andriskissproducer]

Karl Boyes real secret to a successful gameplay finally revealed in this video. The real secret is in the carbon fibre Boss slides to help with stance and balance. 🤭 Loved the video 🕶️🙌

[@MrADVANCEDTEK]

Make a good break shaft?! You agree? I'd get a 12.9mm,swap the tip and ferrule be done with it. Maybe you can paint it at the joint and polish or burnish it to a shine? Worth a shot. And I'm glad you said that about black ferrules. That big company(Pre....tor) gives you custom shaft options now and a white ferrule is now a option all though kinda thin.

[@Rickbearcat]

Why do you not want to spell out the word Predator? Will the thought police come to your house and arrest you?

[@anthonytucker7574]

❤ id love to try the 13.9 for a break shaft or jump shaft!!!

[@WechaiMoua-ww3jw]

How much that carbon shaft cost? Where you bought it from? It might sounds ok.

[@LetsTravelOurWorld]

The shiny or matte really has nothing to do with the smoothness at all. Besides, most carbon fiber shafts come with a matte finish and get a bit more shiny. The biggest scam in all of pool is the cost of shafts. It is ridiculous. So let's get this straight - Karl uses a shaft for an hour, which is different from his other shaft, and he can make a really good judgement on this shaft? Hmm. I don't think so. Play with it for a few days and get really used to it then come back and be honest. And the tip thing is a personal preference. This is not to say that this shaft is really good - but the FACT that people are paying very high prices for carbon fibers shafts and this relatively cheap shaft performed fairly well with a tip Karl didn't like proves my point.

[@tonyroberts8772]

I had a similar thing with a shaft from fleabay. Fixed the ferrule and tip and it now makes a decent break/jump cue.

[@catasky]

What is your point exactly??

[@Dickiediscos]

@@catasky my point is I had a similar thing with a shaft from fleabay. Fixed the ferrule and tip and it now makes a decent break/jump cue. Anything else?

[@insoniacv1329]

i know some people with okhealing as break cues and they’re pretty solid for that

[@psychoticapex]

Do another video and break the Temu shaft in half and show us what it is made of. Or cut it in half. I always wondered if they are really made out of carbon or some fake stuff.

[@jeboks777]

I actually also bought one from the same seller 2 days ago as back-up shaft. 😁 Instead of adding a white ferrule, i plan to change the tip to a light grey like Ultraskin soft tip

[@mammoth1887]

I think you can compare it better with JF shafts. Not with the SMO though.

[@bigzati1135]

What tool is he using to scuff up the tip?

[@RichardsWorld]

A decent cue repair guy can make put something on the shaft and polish it up. And.. mow deflection shafts get most of their effects by having very low weight in the front of the shaft. For 55 pounds, that is a steal. The 13.9 mm would make a cheap break shaft.

[@greg7316]

Karl. Do a video on tip shaping and care?

[@eckateckat3449]

dont understand the critic of the too smoothness of the cue gliding through the fingers. this is normally what you want, especially by pool players because they have no pause at the backswing. it gets stickier and shinier over time from natural hand oil transfer. add a little bit of white insulating tape on the black ferrule and your sighting critic is erased too.

[@BennnWJK]

I have a brandless chinese carbon shaft with a 13.5mm tip that i pair with my mezz powerbreak kai. It’s amazing for roughly 100 USD

[@robertreese2600]

Table top looks good. Why did you change it?

[@nitekram]

Is there a link to the one you bought, as there are so many sellers, so many different knockoffs

[@Chris-mu9us]

Hi Karl, how are you?. I did think of buying that carbon shaft but problem is their joint diameter is 21.40mm and Predator says anything within 21.31 to 21.38mm so that the transition between the butt and the shaft is smooth. Your opinion/advise?. Thank you

[@keykey1401]

TIGER FORTIS CARBON SHAFT. Carl you really need to try this. I cant say enough how good this shaft is.

[@donanemone4901]

What or you using to shape the tip , almost looks like like a sponge with sandpaper on it

[@oscargonzales-ly5qe]

Yes it’s a sponge but with sandpaper attached. You can get those almost any hardware store for $6 or so. I’m in constructing and use them all of the time for sanding cabinets or trim. They have all kinds of grits available. I was impressed to see him use one of those on the tip. Great idea!

[@MikeBilliardsFun78]

nice video , there this one i been eyeing on Raven Carbon shaft like the raven logo they have it 199.00 dollar Ebay ,

[@shannonpichay3988]

My brother and I got the raven break/ jump cue. They feel and play great, specially for the price.

[@AntonioTrew]

How much is that in USD?

They also make it with white ferrule - just not available on temu.

[@onnyt60]

So where to order if not TEMU?

[@BCBbaseballplayer]

Please review the SMO when you can

[@erkamau9629]

A link to buy this shaft ?

[@AfTTeX]

I think it would be nice if you could put a different tip on it and maybe make another vid with a final opinion because we all know this tip is a bit os achilles heel

[@juanball5480]

Because if this great review I ordered Eagleking Carbon fiber Shaft white ferrule with 13 mm Tip .

[@KarlBoyesPoolLife]

Hope you enjoy it!

[@gtrdrejugfde288]

Any carbon shaft sanded to 3000 will be smooth and shine

[@catasky]

Carbon is a weave so no matter how much you sand it you can't make it glossy.. Also sanding carbon is very dangerous for health

[@MD-vy9jb]

I bought one with 9.5mm tip and 5/8x16 thread, since I needed to have 1/2 snooker cue to fit with the pool cue into the same case. Also OKHealing brand. I agree the tip was awful, replaced it with something better and now it plays fine. Mine has white and black ferrule, so no issue with blending colors. I am also not a fan of ash cues, so this one for snooker seems way better. So almost all positives, but one significant drawback - it seems to lack "power", for a lack of better term. I feel like strong shots are dampened somehow, as compared to my regular cues, both snooker (ash) and pool (kielwood). This seems like a great shaft for beginners, since it's not likely to get damaged when banging it with balls during practice or if oyu leave it in a car trunk overnight in winter. Easier to clean as well I believe. Thanks for the video Karl!

[@haydenwalton2766]

and the join diameter was exactly the same ?

[@MD-vy9jb]

@@haydenwalton2766 There is a small lip, but I don't really mind. You can't feel it when cueing. It could be the butt fault as well, since it came from a cheap, old cue.

[@onnyt60]

On my Predator Roadhouse cue it was a perfect fit. Exactly like my 314.3 shaft.

[@joehirst4347]

If ya only play bar tournaments or just pool hall don’t need a top brand but would recommend ya buy a top brand if ya a pro

[@joehirst4347]

Just got 2 carbon shafts receantly ferule don’t bother it black but the tip is hard as hell

[@anthonytucker7574]

Disclaimer if your a maple wood shaft player switching to carbon or even low deflection give it a week or so! You will immediately hate the way it makes you miss balls but its actually not the shaft its how you was aiming with wood that was the issue! Only think about the feel and consistency of hit not the all made or missed!!

[@MattPolandMI]

Kind of wonder how the feel would be after running down the shaft with Isopropyl alcohol.

[@KevtechITSupport]

I buy stuff from temu all the time. They have some decent stuff.

[@Atkari.Tomasz]

hi @KarlBoyesPoolLife i bought the same shaft but from aliexpress... i ordered it in 13.9 mm tip with radial joint for my predator air 2. because i wanted a jump carbon fiber shaft i wanted to say... these shafts are insanely good... almost unbelieveble. the finish its perfect, straight ferule, leather, joint everything allignes perfectly. i would in the future change the tip for something a little bit harder though... 10/10 greetings from germany 😁

[@kevintran1745]

Hey I ordered one to do the same thing recently in your opinion does it jump better then the original wood shaft on the air 2?

[@Atkari.Tomasz]

​@@kevintran1745 hi... i put a weight bolt in the back... 1 oz... now i jump easier and streighter (less unwanted english) but for close jumps under 1.5 balls distance the wood one jumps easier... for longer jumps i like the carbon better... i still have the original tip

[@kevintran1745]

@ you’re still using the pigskin tip correct? I ordered mine with the Bakelite phenolic tip so it should probably remedy the short jumps. But thank you so much for your input.

[@Atkari.Tomasz]

@@kevintran1745 i didnt chose what tip should be installed... but i think it came with phonelic already

[@Zeus03281]

I plan to buy also that carbon Shaft in temu

[@bitrage.]

Tritium tips?

[@johannestobler1552]

- you can polish that shaft just like you would with a wooden. I did it. - the manufacturer has shafts with a white plate. the reseller you bought from just doesn't offer it. - I was able to buy this shaft in my country for 45 €. if you need a wider selection you have to go at the moment to aliexptess. Price will then be more like 80€ incl. shipping.

[@secondary7978]

I'm glad you enjoyed the 55 pound black shaft. :)

[@TheNEOONE1]

For that price u can laquer and paint the ferrule

[@murahk123]

Is the part of the shaft below the tip called a ferrule or vault plate? And does anyone know the difference?

[@exscalliber]

This is a bit of a trick question. A shaft may or may not have a vault plate which is essentially just a plastic disc between the tip and the ferrule. The ferrule actually goes into the shaft a little bit and can be anywhere from a few mm to an inch in length. Smaller shaft cues tend to come with brass ferrules or can be upgraded to titanium. Larger shafts generally come with a hard plastic/imitation ivory ferrule. It’s rare to see ivory ferrules and in my opinion are a shitty thing to be proud of owning. So to answer your question, it’s generally called a ferrule, but the shaft can sometimes have a vault plate like the predator Revo does.

[@murahk123]

@@exscalliber My carbon fiber shaft only has a tip, vault plate, and then the shaft. No ferrule. It's the same with the Revo. It seems like you're wrong in terms of the order. It's either vault plate or ferrule and not both. Vault plate being more popular in carbon fiber shafts and ferrules with wood. It makes sense because why would a shaft need both a ferrule and a vault plate? They both provide separation between the tip and the shaft. Having both is redundant and not only costs more money to make, but makes the shaft heavier, adds to the length, and everything is calculated when making a shaft.

[@exscalliber]

@@murahk123 we are actually both wrong, what I got confused with is a silencer pad. A vault plate is the predator way of saying it’s a ferrule for carbon shafts. They explain it in their support pages when googled. Either way, a silencer is not that uncommon with the Kamui clear being one of the most popular tips with a silencer. You are supposed to install the tip on the ferrule with the plastic attached. There are very few cues that have no ferrule and only a silencer pad. They are generally custom wood cues however. Every carbon fibre shaft has a ferrule since the only way to give the carbon pipe a flat surface at the tip is to have a ferrule or “vault plate” if you are Predators marketing department.

[@VeritasForYou]

That sound can be removed with a polish machine. The black ferrule is OK. this video just proves that CB shafts are overpriced.

[@LetsTravelOurWorld]

Oh absolutely. It is way out of control. The price of these shafts is ridiculous and the pros really don't want you to know you can get an off brand shaft relatively cheap and it plays well. You just have to get the tip you like and go from there.

[@wallytverstol8627]

good to know. there must be a way to shine up that shaft

[@georgiannegooday9108]

Have you ever used Rhino?

[@NathanWoollaston]

Should have put your usual tip on for the last third of the vid.

[@patsalt4462]

Break que??? Possibly turn it into a break que

[@network735]

i met karl at the mosconi cup in vegas in 2015 he is a very nice guy and big made me look tiny

[@harunigee2103]

Would gladly play with it... Are you donating it Karl 😁. It would represent you in Kenya

[@KarlBoyesPoolLife]

Maybe one day! 👊🏼

[@physicsguybrian]

Aren't you meant to wear a glove with CF shafts?

[@txinopool]

Really good video, thanks for the comparison

[@ElJefeBilliards]

Who’s got the link

[@douglasbyrd7412]

Is it my imagination or @ 12:15 did the cheap shaft appear to have a white ferrule? It's clearly black at the end.

[@KarlBoyesPoolLife]

Shaft on left is my personal shaft, Shaft on the right I think it was the tip that made it look lighter

[@WechaiMoua-ww3jw]

I like your table, Carlboy.

[@KarlBoyesPoolLife]

Thanks 🤩

[@scambodia147]

@@KarlBoyesPoolLifeshame about the drab grey walls tho mate.

[@erickort1987]

im shooting with a jacoby kielwood shaft with standard tiger everest tip,it shoots great,the hell with carbon shafts.

[@KarlBoyesPoolLife]

Might try one

[@aaronalbert4580]

I’ve always wanted to buy one off temu to test out😂

[@TamMcKie]

Well you gave me one, plays well but not used it as much as I wanted... And you weren't bad against Jayson in the Scottish tournament...