How to make HIGH quality PCBs at home

[@nagavenkatasimhachalam6357]

What is the toner transfer paper which paper sir and where is the availability please reply sir

[@SurajGrewal]

I suggest not to apply any solder before drilling, since otherwise you'll have lead dust all over your room.

[@nickmuffin1722]

Exactly!

[@edgeeffect]

I'd drill first... but his holes do have no copper around them so there shouldn't be any solder at the points were he's drilling... an he does have a dust extractor.

[@Armand79th]

Only if you're still using shit like lead.

[@BeetleBuns]

as opposed to the more dangerous lead fumes already there from the soldering process?

[@dhupee]

Many people uses silver coating as opposed to solder coating I forgot the compound, silver nitrate or silver chloride

[@mariomanus3176]

for quick prototyping, I now prefer CNC PCBs - as the process is much more quicker with more accurate holes. Been doing this and the photo methods before.

[@n00blord111]

Be rich, gotcha, good advice!

[@mariomanus3176]

@@n00blord111 i bought the cheapest Chinese knock off though, and did some low cost DIY upgrading.

[@edenassos]

@@n00blord111 "Be rich". You need to be rich to get a CNC? Go get a job, freeloader.

[@bobbyd1961]

I'd be real nice if you spoke and explained each thing you did and what you were using. Like what kind of paper that was you printed on. etc...

[@alexandrubossro]

I was wondering the same

[@Shopeeka.]

Which paper did u use for toner transfer?

[@Rodrigo19602]

Hello. In my country (Brazil) it is called Glossy Paper, I think it is some type of photographic paper.

[@staviq]

You can convert an old laser printer, to use instead of ironing iron. Laser printers have nice rubber rollers and a heater all built in and ready. I built one myself, it's super easy.

[@jovand6606]

you can use those paper plastification devices, they also have hot rollers edit: its called a Laminating Machine, they are vary cheap afaik

[@rahimsarvejahani2083]

Dear friend, what is the name of this paper?Can I use sticker paper instead?Because it is yellow like label paper

[@just-simple-I]

@@rahimsarvejahani2083 It's a type of photo paper. You can use any glossy paper. I used glossy paper from magazines when photo paper was unavailable for me.

[@jjjj-mu9rk]

what the nail polish use for?

[@just-simple-I]

@@jjjj-mu9rk He covered defected areas. I mean areas that paint hasn't been covered on tracks.

[@pjwarez]

For tinning, it seems some tinning fluid would be a lot easier than using a Soldering iron, and much better results as well.

[@SharvilSawargaonkar]

But you would accidentally close the holes with solder then you will have to drill again same thing

[@pjwarez]

@@SharvilSawargaonkar Tinning fluid does not close holes on the PC board. It just puts a very thin film of tin over the copper.

[@LahiruNuwandhikka]

Which paper did used.

[@xavierr4508]

You are using polygons that go along some tracks, how is called that technique? I know how to use polygons, that's not the problem, but how did you got that final tracks' shape? Does it even have a name? Or I just add polygons at my own discretion? Thank you!

[@rahimsarvejahani2083]

You can design any shape in Altium Designer software😇

[@hmoudkhresheh1979]

Please what type of paper you used

[@krawutzimon]

heavy metals don't belong into waste water, unless you want to make water treatment a lot more difficult and expensive.

[@wadebrewer7212]

Then cities should make the effort to dig up all of the lead pipes laid years ago and replace them. Besides....tell the people of Flint what this guy is doing is horrible.

[@rodrigos.2099]

nice, gloves will help to keep the cooper clean/unoxided.

[@cyber38313]

Wow, very nice. What sort of paper did you use for the transfer?

[@wolvenar]

Search for "PCB Circuit Board Thermal Transfer Paper"

[@therealjammit]

We used to use the glossy pages from magazines. Don't use the cheap magazine paper, make sure they're the glossy type.

[@ami6packs]

@@therealjammit I'd never tried with magzine papers. I'd great success with glossy phot papers though. I'd never tried these thermal papers. I don't think I could find them locally.

[@rahimsarvejahani2083]

@@wolvenar Hello, dear friend, can I use label printer paper?

[@wolvenar]

@@rahimsarvejahani2083 Are you talking about the wax like paper that backs sticky type labels? I really cannot say, I have never tried. But it may work. I have used glossy paper from magazines, and glossy photo type printer paper with reasonable results with larger circuits. Magazine paper is not always good for fine (thin) circuits.

[@jeremiahrwells]

Great video, but can you comment on what ratio of citric acid to hydrogen peroxide...? Does it matter?

[@Chanchan1-k7q]

1:1 should be fine

[@techmatebolpur9252]

40% 60% some where 50 -50 % depends on copper plate quality and thickness

[@janithprabodha9125]

What is the name or type of the papers you you used to print?

[@mobilunik450]

Paper

[@dmitrys711]

Why the tinning of the whole cooper surface needed? Isn’t the only places around the holes enough?

[@eross21]

what kind of paper did you use to print this

[@RalfHellener]

what is that for a paper? What is the name and from where can I get ?

[@captain6198]

Is it a backpaper of adhesive label paper?

[@piconano]

Brought to you by JLCPCB!

[@JUANKERR2000]

What is the transfer paper, please?

[@nickmuffin1722]

The photographic paper which has like a plastic coating on top.

[@hobbyelectronics6630]

Toner transfer paper for laser printers.

[@chukwukaobiano7498]

Great. Some what kind of Paper is that?

[@christopherwilliams1112]

Is the Sine Wave Inverter design you made the PCB for available online? Chris Williams

[@hmoudkhresheh1979]

Please what is the type of paper you used

[@ami6packs]

What paper have you used? Please tell.

[@wolvenar]

Search for "PCB Circuit Board Thermal Transfer Paper"

[@ami6packs]

@@wolvenar thanks

[@tbirdtelecaster7481]

Can you use an inkjet printer to print to the thermal paper, would it still iron on?

[@florinsfinx7614]

No...only laser printer

[@artursmihelsons415]

In place of citric acid and hydrogen peroxide, I'm using Sano kitchen cleaner cream and kitchens sponges scratchy side. After ironing, I'm dropping PCB in water and that transfer paper cames off by itself.. When pulling it dry, toner in some spots can came off because of PCB surface imperfections.. 😉

[@rahimsarvejahani2083]

Dear friend, what is the name of this paper?Can I use the yellow paper of the label printer?

[@RembertoMachuca]

@@rahimsarvejahani2083 Toner transfer paper

[@qasimghouri2884]

Which printer you are using for this?

[@colombowala]

Any Laser printer at darkest setting

[@huseyinhalitince4404]

it works printin inkjet or laser printer ? what kind of paper that used in printing. are they somewhat special

[@amx2]

If you now what is the kind of paper , please tell me

[@sultanscience4912]

Would you share , what the brand of printer that use for, And what kind paper ? i want buy it

[@DanielStingBR]

Nice you are fine man! I found white transfer paper, and yellow, is there a better?

[@imranbehnam7428]

what is the name and type of this yellow paper please

[@Enigma758]

What design software works well for single sided boards?

[@RembertoMachuca]

I use Proteus

[@mariomacinoi9065]

Hi, could you please let me know what kind of paper you used for the printer?

[@KAMALDEENAUSMAN]

the paper is thermal heat paper. now could you pls tell the name of the material he used. i am sure its not copper

[@sercosmico9166]

Thanks for the contribution friend, please tell me the type of paper used for printing

[@pic__l_]

5:19 what solution is that ?

[@pakkiarajahbaheerathan8280]

This PCB board design what softwear using design sir pl telme this drawing softwear name sir? Pl telme.

[@stevenyoung4779]

You're using Sprint Layout !!! superb, my absolute all time favourite PCB software.

[@Sana-en9ln]

The PCB turned out very nicely. And what kind of paper did you use that doesn't leave it on the paper?🤔

[@Liam-j6y]

If you score the copper side with a Stanley knife using a ruler as guide you can then snap the board and end up with a prefect straight edge

[@FreeTechLabs]

can you give the link to buy the Paper?

[@hugoegon8148]

Nice work, but tinning the whole PCB is very time consuming. What about covering it with a solderable transparent film like "Kontakt Plastik 70"?

[@hobbyelectronics6630]

Look up Liquid Tin by MG Chemicals.

[@RembertoMachuca]

@@hobbyelectronics6630 do you know if Super Shield MG Mechanicals can also be used? or which is better?

[@hobbyelectronics6630]

@@RembertoMachuca Super Shield is a conductive shielding paint. It will not work on copper traces. Liquid Tin is a liquid plating solution for copper traces. Two different products for different uses.

[@giuseperangel9647]

Helo friends! Can anyone tell you what paper is used in this process?

[@theodoreroberts3407]

Now, this is the density (though still small) I'm talking! How do you make a double sided board? I've done it, the old fashioned way. Lost some boards and I had a lot of acid to neutralize.

[@mp-uy9sv]

@Kasyan TV can you please make a "generalized" video about "how to" convert a three-phase tig welder into a single-phase please ? and also how to change the standard accepted voltages a welder is designed to run off into the voltage you require for your country /power source. As there are countless used cheap , powerful 3 phase welders available online that no one buys because 3 phase is rare and too expensive to get installed in residential houses, surely you know of a way to do these things

[@albertsekyr8759]

Where do you buy the PCB board?

[@juliomamani3019]

Qué tipo de papel uso para el lado de dónde muestra la posición de los componentes con sus valores???

[@luftstolle]

Oh my god, that's so much work. Sorry if I sound off-putting but this seems like so much wasted effort. And it's sponsored by JLCPCB which can make proper double-sided (or 4-layer) PCBs suitable for 0.5 mm pitch SMT components and plated vias and what not very cheap. By the time you finish the whole DIY method (which I assume also fail in some way regularly) you will almost have the finished PCBs in your mail box for just a little bit more money.

[@topgearIQ]

Type of printer .

[@tobitezea8825]

Why did you use hydrogen peroxide and cetric acid to wash the board before putting in the PCB paper work

[@coolchriss]

I believe this method is effective in case if we use all smd components, because drilling is going to take a century 😅

[@AhmadRaza-di9qz]

WHICH PAPER THIS.......NAME OF THIS PAPER

[@omarkhaled3398]

Toner paper

[@vvdvlas8397]

Приветствую! Что за бумага для перевода? "ведет" ли ее при нагреве?

[@SerjikM]

на алике продается. Термопереводная бумага для печатных плат. Распечатывать плату на принтере надо на определенную сторону. Вроде которая глянцевая. Бумагу потом не перегибать, тонер будет трескаться

[@pdrg]

Two quick questions - what was the nail polish for? Just to cover any imperfections? And which acid was that? Ferric Chloride is a lot darker and uglier, that almost looked like pickling vinegar!?

[@wolvenar]

I think they mentioned citric acid and peroxide. It can be used to clean the board by etching a small amount after soap and water cleaning to make a very clean copper surface. Also it will do the full board etch when left longer.

[@hamidselectronics4863]

There is a thin transparent sticky sheet over these papers. Should we remove this before putting it into printer ???

[@Miniatures-And-More]

I Dont Think So , That Is Essential It Make It Non Stick So that When Heat Is Applied It Would Transfer It To The PCB

[@wolvenar]

Search out "PCB Circuit Board Thermal Transfer Paper"

[@_RushiKansara]

please give this inverter circuit layout

[@therealjammit]

"Printed incorrectly" Lol. We've all done that.

[@arielbene2013]

This is an ad video, showing how complex it is to make pcbs at home... Not explaining exactly. . And giving links to buy pcbs through them

[@alfred536]

NICE the only thing that I didn't catch is what kind of board did you start out with and was that just a regular print from just an everyday printer??

[@hobbyelectronics6630]

Toner transfer paper on a laser printer.

[@lakshmansenevirathne2908]

which software did you use to create artwork?

[@PK-nv4on]

Why applied lead ! It's an additional work and expensive. Anyhow soldering is done after mounting components...

[@bjbossjeffra3301]

how to download pcb layout pdf 200w

[@Etech47]

Nice effort to design PCB at home

[@quebuenavaina]

en el caso de Argentina un particular es dueño del subsuelo,? en otras partes el estado es deño del subsuelo

[@tiberiuoros9733]

Amazing... Very beautiful work.

[@rogeronslow1498]

With the low pcb price from JLC and many others and their 1 week delivery why would you want to make your own?

[@edgeeffect]

I love how you do toner transfer to get a "silkscreen"... that's nice. Also your "ancient" iron is fabulous. What concentration of Hydrogen Peroxide do you use.... I assume it's quite strong because of the relative "weakness" of citric acid????? In the UK, we can only get 12% peroxide as our government fear we will use greater concentrations to make missiles or something. I like Hydrochloric Acid because, as Nurd Rage taught us, we can use the resulting Copper Chloride as an etchant itself.

[@fivel256]

Developer at the beauty supply shop. But 12% is sufficient. Even in the US, anything greater than about 12% isn't readily available. We can get it, but it's a specialty item. 40 volume developer for hair color is 12% h2o2.

[@hypnoticatrance]

A much better methode is to use PCB with a photo layer. Then print out with a laser printer on a transparent foliage. After this fix the foliage on the PCB and use a UV lamp.

[@Andrelyx]

Что самое интересное я тоже думал наносить обозначения элементов таким же методом, нигде не гуглил, а метод оказывается рабочий.

[@SerjikM]

Тонер не проводит электричество?

[@Andrelyx]

Всё зависит от того какой тонер в картридже.

[@RixtronixLAB]

Nice video, well done, keep it up, thanks for sharing it :)

[@jamesjohn2537]

Great work mate, keep up.

[@bjbossjeffra3301]

Send me pcb diagram circuit plaese🙏

[@mody6762]

Good work schematic pls

[@justinromang9113]

. cool printer - lov it - where can i get ONE *HP aka-01-kasyan* ....? hehehihi

[@jimmy_jamesjams_a_lot4171]

PAINSTAKING! When you tinned the copper with flux and solder! I don’t know which would leave less pollution or make less threat to personal health: dipping it in that expensive ‘liquid tin’ or doing it like you, with solder? I went the whole silk screen from photosensitive emulsion course, and really yours is probably even better. I don’t make proper stainless steel screens and stencils, just use the one they sell at the art shop for T-shirts. So whichever route you take in the end will be result of ongoing experiences, and always making use of what you have to hand in a makeshift manner. Thank you very much for sharing this!!

[@Luismtz263]

paper of transfer thermal is the name of the papers use here

[@solidhit2]

Great video, why is he using nail polish?

[@rafi2437]

Co to za papier?

[@Choober65]

TBH, this is a good way, but given the time and mess, it actually works out cheaper to have JLCPCB make them. You get through hole, HASL, double sided, drilled boards for peanuts, AND they a perfect every time.

[@hyoenmadan]

Not for countries outside Europe and USA. In my country is still not only expensive to order, but also takes weeks to come.

[@hichamtassi1753]

@@hyoenmadan I totally agree, nice to see those adds, but useless for us...

[@timernaut]

Thank you for sharing ! great video.

[@ananthe7up]

rf oscillator all frequency circuit diagram please video tell me

[@nickmuffin1722]

What exactly?

[@PradipKumar-xr4kv]

आप लोग video के लिये perfectly बना लेते हो Actual it is very difficult

[@MatiGm-q8s]

Było można szpatułką. Są lepsze groty . ??? Trochę nie ekonomiczne - ale doceniam starania

[@AKKJ420]

What are you using? why are you using? Would have been very helpful. This video has very little info.

[@rajivb9493]

Please use CNC for PCB Etching, it produces much better results which can be reproduced again & again without any loss of quality...also no use of these harmful corrosive chemicals if you etch using CNC, thus cleaner & greener too...

[@bjbossjeffra3301]

Send me diagram pcb circuit board pdf 🙏

[@mathr5255]

0:04 Glossy Photo Paper GP-401. Made in Japan 😧

[@conv2381]

No Voice ?

[@aga5897]

Awesome ! I especially like the top side, with the component markings.

[@sharmashivanand]

High quality?

[@xfxox]

чё за бумага то?

[@amkp40technology]

Nice ❤️❤️❤️👍🏻👍🏻👍🏻👏🏼👏🏼

[@electronic7979]

Very good

[@KF-bj3ce]

Cutting a PCB with tin snips?

[@keithking1985]

thank you iv never made my own board but will save this to my favourites for when i do make one. THANK YOU KAYSAN TV

[@MedSou]

*Good job* 👍👍👍👍👍

[@Steve-wx1gk]

Maybe you are really tallented👍

[@Посредственные_Проекты]

как называется эта чудо-бумага ? где она применяется ?

[@Harlequin43]

Так и называется - бумага для ЛУТ. Продаётся в радиодеталях. Но можно просто использовать страницу из глянцевого журнала.

[@Посредственные_Проекты]

@@Harlequin43 из глянцевого журнала не очень. я покупаю в копировальном центре, но её надо отмачивать...

[@rahimsarvejahani2083]

@@Harlequin43 Дорогой друг, что подразумевается под глоссарийным журналом?

[@sxpv]

@@rahimsarvejahani2083 just a page from any magazine, printed on a glossy paper

[@dimassetiaji2911]

when i made them all perfect......suddenly the factory create all printer "economic ink printing" ,including regular photocopy machines........which is made my PCB Lines goes many-many hole like a sponge !! !!.....WHAT A CRAP....BAD IDEA...........thats why you guys must patch it with TIN solder all over the pcb....a super crap.

[@sarathai2876]

Wow , Very impressive. You rock

[@hmjeon8609]

The lettering looks good but is not needed and wont last.