Making perfect PCB at home

[@PhdHung]

Make PCB 2 layer perfect at home kzbin.info/www/bejne/aoW0gWt9aZaMpdk

[@kevindavidchamorrovega5959]

What is the model of your printer?

[@trankhacquyet23]

Are you Vietnamese?

[@seasun9940]

@@trankhacquyet23: Homemade "102" => có 1 không 2 => chỉ có người VN mới chơi chữ kiểu số này :D

[@lurkingcorsa10]

Deleted... Bro

[@varunkavil3154]

Video not available

[@behnamazizi9470]

Your tools and stuff make me feel like I'm watching an apocalyptic movie.

[@PhdHung]

:D

[@Elfnetdesigns]

Well in some places that would not be to far off..

[@oppok5657]

[@MrGigglesGalore]

He's resourceful, I guess... And that's a good quality to have perhaps. A man's got to work with what he has ❤️ P.S: Beggars can't be choosers.🤷‍♂️

[@PhdHung]

Finished products kzbin.info/www/bejne/oaTOYZSkaLeInLM I rarely use multi-purpose PCB. I usually make PCB from copper plate. It is beautiful, and works stably. Many team members often ask me how to make perfect PCB at home, so Today's video I will show you how to create perfect PCB from copper plate. Facebook group : bit.ly/CreativeElectronic #Inverter #12Vto220V #PCB

[@shoumikahmed6373]

Thank you very much.....

[@PhdHung]

thanks

[@anandkachale5187]

I have always used the glossy paper (not the same as you) but everytime failed to transfer the toner ink fully on the copper plate. Any suggestions? Does it have to do with the paper or the time and amount of heat applied during pressing it with iron. Please help

[@evergriven7402]

@@PhdHung I liked the video what was the rock you shaved off and mixed with the gasoline to make the terpentine ? Thanks

[@Adam-tk4fm]

Very clever drill press design!

[@PhdHung]

thanks

[@PhdHung]

Finished products kzbin.info/www/bejne/oaTOYZSkaLeInLM 1500W inverter

[@oscill8ocelot]

Man, I am impressed with the work you can do with the tools you've made :3 Really leaves me with no excuse to start doing cool stuff too - if I don't have the tools, I should just make them. =) Great work!

[@PhdHung]

Thank you, this is mini PCB drilling machine kzbin.info/www/bejne/Y5u5nqaVrpaBbas

[@engineerkohat]

Wonderful creation. Great lesson on pcb manufacturing.

[@PhdHung]

[@tamashamas6193]

Everyone agrees that your work is incredible! I'm at a similar place with my diy work in terms of tool availability, inspired by your ingenuity in making your own tools.

[@HarryHobbit]

Get rid of the constant bell rings ... once is enough ... esp. when there is not much other audio

[@PhdHung]

Yes, I will lower the volume

[@batticha462]

Great, the PCB, the drill, the simplicity, every things :)

[@PhdHung]

thanks bro

[@CRISCOL64]

you are by far the most talented man doing this PCB, I'm amazed with the final result, and your tools are from another world, I never would imagine to use a old PC fan to do a vibrator. 👏👏👏👏

[@PhdHung]

[@BootstrapParadoxd]

He made this in a cave, with a box of scraps!

[@jackstephens7222]

Iron man references on point

[@yusukeukikawa]

It make me smiles

[@princeedhwardhezmi6469]

Everybody is gangsta till this guy shows up with his drill press

[@shadyamy1670]

Nicely done....but would you pls let us know what is that brown colored rock like thing u r scraping and mixing with gasoline to protect the pcb

[@PhdHung]

resin of the pine tree.

[@tommyttk24]

So wonderful, in my company has many claim PCB to supplier. Your PCB very beautiful. Thank you for share.

[@PhdHung]

thanks

[@MuhammadYaseen-vx5hw]

very nice..... your work approved that you are a real master.

[@PhdHung]

Thanks, hope you enjoy it

[@MuhammadYaseen-vx5hw]

@@PhdHung yes, of course.....

[@OmeedNOuhadi]

Awesome, interesting technique! That drill press is just amazing. It is so sad to see people who cry that they need to buy all these tools to be productive, when I should have been thinking of ingenious was to improvise my whole life. #ono

[@rockyrunner3102]

I do the same tricks for pcbs awesome awesome

[@OmeedNOuhadi]

rocky runner great. It’s nice to keep making your own tools if you don’t have any. keep up good work.

[@RAndrewNeal]

Yeah. Do you know what it costs to buy a little drill press for this purpose? It's unjustified. So I got a ~$20 drill press stand (for hand drills) and a ~$10 hobby motor that came with a chuck and bits, and I was rolling with a $30 PCB drill press, give or take a bit. The things that I already had though were pieces of rubber to make a spacer because the clamp on the drill press stand was too big, and a 12V DC power supply to power it.

[@varunkavil3154]

Using Sundras solution was nice idea but how to vacant the solder pads while applying solution?

[@karthikdhanapal3144]

Awesome work!! , will this board require solder mask layer ... Please let us know..

[@gershona.7268]

Pls help with the tutorial to make the drilling machine. Thanks

[@ferro_liquido]

Hey! What kind of printer are you using? Laser or injection? Is it important? Nice video! Thank you!

[@PhdHung]

I use glossy paper and laser printer

[@ferro_liquido]

@@PhdHung nice, is there a way to do it with injection printer??

[@lesterpicar9815]

im a CNC engineer yeah its amazing that you can make holes manually but i wonder what will you do if this is a double sided PCB

[@tubeforinsomniacs6157]

You ae the champ buddy, great job👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻

[@averagejoe845]

Page from Borland C++ 3.x manual ... brings back old memories.

[@PhdHung]

Yes, about 20 years ago :)

[@jashimuddin6610]

i love you brother and your al of work. you are really king.

[@PhdHung]

Thanks, hope you enjoy it

[@fasihzafar7423]

wow... best tutorial ever watch....!!!

[@PhdHung]

Thanks

[@sylvainrossi731]

I wonder about the turpentine solution, is it really effective like a varnish ? No issues with soldering after ? Is it not flamable ?

[@alfihry]

Very impressed by the Drill press 😍⁠

[@how787]

I can’t understand nothing here but I still found this very satisfying

[@PhdHung]

[@narsingraokumbala6048]

Excellent workmanship

[@PhdHung]

[@stephenwarren6539]

Do the paper prints have to be used imediatly after printing or can u give a time pls ? thank u for video it is good

[@PhdHung]

Can be used immediately or after a few days. Quality does not change.

[@stephenwarren6539]

@@PhdHung thank you good man very helpful and clear video aswell

[@Elfnetdesigns]

Dialog would be nice.. For DIY homemade though it looks better than most I have seen on here which look like PCBs from the 1960's

[@PhdHung]

:D

[@Pat-Van-Canada]

very creative, if someone gave you $1000 you could turn it into a million

[@PhdHung]

lol

[@tuepham7406]

Can I wash out the ink with acetone? thank you!

[@PhdHung]

ok bro

[@maninder1984]

Very detailed and well captured. Thanks mate and well done!

[@92trdman]

Ink marker also able to cover those spot

[@PhdHung]

:D

[@MrGoddly]

I'm more impressed by your tools than the PCB.

[@PhdHung]

Yes, thank you very much

[@DaSlotho]

wow...im impressed man...good job

[@PhdHung]

Thanks

[@hendriagustian7082]

Maybe I will use a file printing service such as stickers ( I will use photoresist film).

[@PhdHung]

yes

[@scamper_van8470]

well thanks for sharing!!! really appreciated!!!

[@PhdHung]

:D

[@ajiprakash2608]

I have a doubt, what is used for making turpentine solution and what is used for finally component side polishing??

[@PhdHung]

at the end of the video, just the water.

[@FTID-mr5fh]

This is use Laser printer or inject printer ? Thanks

[@PhdHung]

Laser

[@FTID-mr5fh]

If use inject printer work or not ?

[@handcannon9814]

Ive been thinking to reserve one motorcycle battery too for home use. Btw how long will it lasts.? Say like ur own normal usage.

[@PhdHung]

Normally, motorcycle battery 12V - 6Ah. If you use it to charge your phone, it can work for 5 hours.

[@labscience8271]

Or you can order it... Great video!

[@PhdHung]

Thanks

[@RossPotts]

@6:30. Amazing transfer! And that’s just any old inkjet ink?? And that unbalanced fan for agitation. Effing ingenious!!

[@TheScreamingFrog916]

Must use Laser Printer for transfer. Laser Printer prints with plastic toner powder(not ink), that can be transferred to copper PCB with heated iron. If you don't have a laser printer, you can have printed by local print shop of your choice, like Kinkos, FedEx, or at your workplace. Most large large copy machines use Toner/Laser Printer inside for making copies. If you can print with inkjet at home, then you can have copies made on a copy machine that uses toner/Laser printer for making copies.

[@RossPotts]

xmrtuvgs my bad, I must not have typed what I was thinking, LOL! Years ago, I bought a somewhat cheap High-res Samsung printer for this purpose.

[@impulserr]

Amazing job, great quality

[@darmendelektro8652]

wow very nice..thank you so much...for tutorial

[@PhdHung]

thanks

[@blackEngineerr]

this fan was thougt so wisely, nice vibration mahine.

[@PhdHung]

Thanks

[@wesiyadimaurisza]

Nice work

[@PhdHung]

Thanks bro.

[@UnimaxTechnology]

All Good ...Thanks For Everything

[@stephenwarren6539]

hello i have found 3 types of copper clad board - 1 standard - 2 photo sensitive - 3 pre-sensitized photo sensitive and im asking which do i need to get the same results as u did in your video?

[@PhdHung]

Just need copper clad board :D

[@МаксимДорошин-ы3у]

Is it possible to make solder mask at home?

[@PhdHung]

Yes, of course. It's quite simple, next time, I'll do it

[@rohit.nimkar]

Great work man. Can you please add the links for the drill bits and the dc motor chuck?

[@anukeshambatkar6255]

Sir which material you add in turpentine solution for protection purpose

[@AliAdnan-l8i]

مرحبا أستاذ اشكرك على جهودك وقناتك حلوه مفيده أستاذ اني سويت نفسكم بطباعه لوحه PSB بس مشكلا ما يطلع نفس خارطكم من طباعه تكدر كولي لوزحمه اشكرك

[@nanacinho]

I really like your drill press table, which motor did u use ?

[@PhdHung]

here kzbin.info/www/bejne/Y5u5nqaVrpaBbas

[@siddharthmhade4159]

Witch software use for design circuit plz send me this software link

[@PhdHung]

i use eagle 6.6

[@rowheen5320]

Hi sir! Did you use an inkjet printer or a laser one? Thanks

[@PhdHung]

i use LBP2900. Laser printer

[@الفلافسيبهيڨا]

Hi,What kind of paper is used for printing, and what is the name of the application used to draw the electrical circuit? Thank you

[@learnfromideas5258]

Nice work buddy keep it up

[@PhdHung]

[@cleitonakaspyda]

"wear your gloves" you should listen .... feels like your are leveling up your tech tree in a survival game but it's also so nice congrats!

[@jumbo999614]

How do you cut the pcb? box cutter?

[@mohamadaldarwish6678]

Excellent work ... You're smart boy 👌👌🌹🌹🌹👍 thanks...✅

[@reshairo]

Man pcb was amazing. What is that Turpentine solution ?

[@dekagussudiarta164]

How many minutes time do you need to iron the pcb?

[@PhdHung]

~ 3 min bro. max temp

[@dekagussudiarta164]

I made already...and the layout can't trasfer very perfect...always miss some layout..do you have any solution for that??

[@emmaopoku7390]

Please which ink should I use for the printing

[@valentinshakhin4265]

Мега-чувак! эклектика эпох и технологий.

[@hepto100]

ЛУТ)

[@dazzlenconfused]

Paper used ? BTW awesome tutorial

[@truongnguyen2897]

Mạch in quá đẹp , bửa nào đặt mạch in có làm k ?

[@PhdHung]

tất nhiên là không rồi. đặt mạch nhà máy giờ rẻ bèo. 150K / 10PCB.

[@nhatanhnguyen9248]

In nhà máy tốt hơn bạn ơi

[@susantabandyopadhyay2758]

Very good show.

[@arvindh13]

good work

[@PhdHung]

thanks

[@zhengliang7761]

In China, we always prototype the two layers PCB with less than 1$ to manufacturer, after 24 hours PCB will be ready for delivery from manufacturer, about total 36 hours later we can get the PCBs in hand.

[@PhdHung]

yes, i usually hire factory to do pcb in bulk, but when doing pcb test. I usually do it myself.

[@mauriciozavaleta1223]

You could make pcbs for free but one thing that maintain people to still making pcbs at home is the shipping time and cost of the shipping is not the pcb price is the shipping. If you live out of china there is always a significant amount of time to wait until the pcb arrives , those times can be at least 1 month for america or one week but with a shipping cost of 30-50usd. If you can send me pcb's with one week $10usd shipping I'm yours.

[@deafkite638]

Also pcbs larger than 100×100mm can get pricey

[@mkkn3240]

Very nice PCB

[@PhdHung]

Thanks

[@subhodeepbhowmick]

Which printer..will inkjet printer work ??

[@PhdHung]

No, need a laser printer

[@andrewmcfarland57]

Finally, a use for all my old, broken computer fans! - McGyver would be proud :-)

[@elliesera2948]

I don't say this very often but the use of all of your tools borders on the creepy and I can't put my finger on why.. altogether, this was a very informative and intersting watch.

[@adeshinaajibola5114]

Pls can you make a full tutorials on Eagle

[@PhdHung]

ok, wait me

[@adeshinaajibola5114]

Pls can you upload a tutorial on how to print component values on pcb (top layer)

[@hichamtassi1753]

Hello, this is an inkjet or laser printer ? thanks

[@clovisoliveira9479]

Muito bom! Qual o soft que voce usou para fazer o PCB?

[@PhdHung]

i use eagle 6.6

[@heruehdp5826]

Can use inkjet printer?

[@PhdHung]

no bro. need laser pr

[@heruehdp5826]

@@PhdHung OkOk thank's 👍

[@ВладимирЛугина]

Which cartridge are you using, new or refilled? What print settings do you set for your printer?

[@MeetsAudioAmplifierCircuit]

Provide the link of that stone which is used for protection of pcb copper

[@PhdHung]

I bought it at the store, it's a pine resin concentrate. You can use flux solution to replace it.

[@MeetsAudioAmplifierCircuit]

@@PhdHung thanks a lot keep helping

[@diyexplorer8728]

Thanks for the step by step PCB making. Your designs were great!

[@PhdHung]

thanks bro

[@pakelectronicslab]

Dear which printer is best Laser jet oR Inkjet

[@leesimon85]

Great job. Wait for double side PCB.

[@PhdHung]

ok, wait me

[@leesimon85]

@@PhdHung Great. Thank you.

[@HOLLYWOODlosANGELES]

*Je veux bien tester cette méthode...*

[@ayoubabdolahi8047]

thanks for your guide

[@PhdHung]

[@kalyanjayasimha]

where can we find ferric chloride lumps

[@PhdHung]

I bought it at the store, very easily

[@justinwerstadt8916]

Nice Video, that fan though. 7:53

[@saisasank4560]

What is the material used on the table like some graphs may I know what is it and it's importance?

[@harishkumar4150]

Sir ac line 220v se 6 run chaser ki gerber file mil jyegi kya . jisme 14 pin ki ic lagi hoti hai wo walior output pr 6 transistor pcr406 lage hote hai. Us circuit me ic ka no. Nhi mil raha hai kahi pr bhi

[@charlesworton4020]

Very nice work... excellent result. You might consider spraying the component side with a coat of white paint just before you transfer the component layout (step 8). This would allow the print to show up more clearly. But the result is excellent regardless. >Charlie

[@rbaleksandar]

Love the ghetto setup :D Thank you so much for this. I hate it when someone states "at home" and uses machines that cost tens of thousands of dollars. As if we all have that much money to spend. -_-

[@PhdHung]

Thanks for watching

[@aravindadas567]

thank you very much.

[@PhdHung]

[@arduino2914]

Thanks, I'll try it with atmega🤖

[@PhdHung]

good luck

[@pakelectronicslab]

Which printer using Inkjet or other

[@jbalanjorge]

Nice job !

[@PhdHung]

thanks bro

[@gumnahs]

Awesome 👏

[@Teimur1]

so that is how and where they make Iphones.

[@PhdHung]

you're really funny :))