Kawasaki ER5 engine Full Restoration | Kawasaki ER5, KLE, EX500 Engine Restoration

[@stephenroach4021]

I really enjoy the way these videos are done. No annoying music, no commentary, and a perfect speed to see the process without getting bored. Well done.

[@billyjames9861]

Yeah, yer gota switch em straight off when yer hear music

[@calvinbarnes7664]

Young man I am so proud of you the way you break that engine down and put it back together I am in Mobile Alabama keep doing what you do ready I am so proud of you

[@rofe]

Thank you

[@victr7843]

@Suriya Akela bro I think he didn't know hindi............🙄🙄🙄

[@tammerrateb1167]

@@rofe can you help me with aslow video to feksed my Kawasaki ER5 to tchang desk waer the big one in sayd motor please lam from Egypt Cairo

[@kev8943]

@@victr7843 ya he's sri lankan we don't speak hindi

[@mehmetkursateser9306]

Psikolojik terapi gibi videolar. Keyifle izliyorum.👏👏👏

[@mcdonelldouglas2492]

What are for the pockets at 14:30 on top of the valve cover?

[@Garage_gg]

Secondary air intake blanking plates

[@clarencefernando5381]

ඔබගෙ හැම විඩීයෝ එකක්ම බලනවා..පිට රටවල් එන ප්‍රතිචාර දකිනවිට ඔබ ගැන ගොඩාක් සන්තොසයි.ජයස්‍රි

[@royromero8496]

You guys are awesome!!😊

[@calvinbarnes7664]

Some company should hire you on the spot right now once again I am really proud of you keep up the good work you do Calvin from Mobile Alabama

[@mr.chiefloafer3662]

How talented he is

[@stephenreynolds6239]

Probably best keeping all the money for himself than having some joker fleecing him for his talent.

[@stuartkimber8247]

It's a piece of piss to strip the only bits uve got to line up are the conrod and ballance bar and the cams at the top of the engine everything else is just put in

[@mattb6646]

If i had to guess he probably gained these skills assembling engines in a factory..

[@kev8943]

@@mattb6646 no it's just sri lanka have really good technical colleges

[@pedrodejesuscruzhernandez1052]

Excelente video , me ayudó mucho, nada más mi duda , que aceite le pusiste 😅 saludos

[@devil666209]

How did u hook up you cdi to make it start please I'm having trouble trying to get mine to fire up. I don't have the wiring harness I only have cdi box

[@ScorpionspeedTrikesTeamEcuador]

Amigo de pronto sabes por que le cuesta prender tengo que tapar el carburador con la mano algunas veces para que encienda ? Muchas gracias de antemano

[@mikemaifeld6280]

did you adjust the valves?

[@tgap8817]

Para cambiar cadena de distribución de ese motor es necesario desmontar tar el motor entero o se puede abrir un eslabón

[@notwocdivad]

Nice Job, with a couple of caveats. May I ask, did all the bearing caps go back onto the journals they came from? also the head bolts the same? the faces and bolt threads "bed in" to each other in use Not a good idea to lever open machined faces with a screwdriver and finally I have NEVER seen a mechanic torque down a bearing cap when the others are not fitted and tightened down so far? Inviting trouble doing it your way, Oh and I think th carbs need tuning?

[@dww527]

No lube before putting the oil filter on ? 15:24

[@deadxgod]

does a 1986+ gpz500(maybe KLE) engine fits to EN450-ltd as is? or needs mods to bodyframe is cheaper to get an engine from repair mine

[@yamahasuperbike2202]

No manual, no problem! I wish I could do this. 👍

[@jonathanbrown1120]

I did this with a 4 cylinder kz650 motor, it’s not too difficult I had zero experience and no manual but I did have ambition and the internet/KZbin

[@mxescarboy88]

Doctor of restoration machines, anna you are insane, bad luck to indians you are not in india, i can't give my machines to you, really miss that anna, love from Cochi 💕🤙🤙

[@Ivan__Ivanov.]

Скажите, если отсоединить воздушный фильтр, мотор заведётся?

[@Dr.not.anywhere]

Is it possible to blank the vaccum line completely from the carb and just have direct feed from tank for fuel gravity

[@ryds1000]

thank you for very nice video.How much cost that restoration .Thank you

[@alejandrogrisales7151]

Excelente trabajo y video ...gracias por compartir

[@kalovios]

does it sound like that cause of the timing?

[@dirceuo505]

Parabéns pela restauração 👏👏👏👏 Ficou ótima!!!! 🇧🇷🇧🇷🇧🇷🇧🇷 BRAZIL

[@Batterytruck]

12:50 what is the torque specs?

[@amilcarmoncada1801]

Excelente Restauración completa del motor Kawasaki ER5, mis felicitaciones y saludos desde Venezuela.

[@danielagudelo6571]

Great Work you are a good mechanic.

[@thesohailkhan]

Hii bro finally bht time se jo dhun raha tha aaj kismat se mil gaya muje... Mere pass meri dil ke bht karib pulsar h 150 . 2010 model.. Jo merii life ka firt gift h... Muje wo bilkil new banaana h plzz help me bro reply me only u can plz 🙏 @restoration of everything

[@andrepmp1342]

Fiquei preso no vídeo, muito invrível esse trabalho tão bem feito. Tenho uma ER-5 e dá até vontade de fazer isso pra deixar a moto zerada de fábrica.

[@rebenvelmont5179]

Excellent job!

[@slinkiey]

Another fab restoration. 👏

[@allabouteverything8160]

Я один кайфую от таких видео

[@tanoutfarak4043]

👏👏👏👏i like the you restore this 2 piston bike very experienced.good work.👍

[@Ondra487]

Hi, please can you tell me the purpose of the hose going out from the radiator under the carburators ? thank :)

[@heydarikeyvan]

finally we see your face in this video! your work is awesome!

[@Raminar-DiXiN44]

I'm so frickin glad I found this! My 94 500ex is due for a primary chain now I'm confident I can do it lol

[@miguelasantiago9543]

His knowledge and memory is excellent. Thank you!

[@dellwinelikesrock]

I did not thought I will watch all the video, I dont even have a bike, damn bro, nice work

[@Vietz_art81]

The magnetic timing point at C is the position of the piston above, left or right?

[@a.kastner5588]

It’s definitely a restoration on a budget…

[@dionisis0018]

It does look this way. No surfaces were prepped for gaskets to seal properly,no bearings were replaced even though they are clearly worn. I hope the pistons and rings are replaced(can't really tell) he at least installed new chains,new clutch disks and cleaned the valves...

[@aldoformento7353]

Complimenti... Bel lavoro!!!

[@dellwinelikesrock]

Master, my generator chain broke and when i took the cover out it was full of oil inside, is that normal ?

[@alexdelgado6947]

Quisiera aprender mecanica de ti! Admiro tu paciencia y conocimiento! Gracias por compartirlo! Me motivas a aprender! Sigue asi!

[@Moon_Quake]

this is soooooooo helpful to me while rebuilding the same engine, thank you!

[@sauljimenez8070]

En donde se ubican amigo

[@PoteauCowboy]

Beautiful Work.... Great Mechanic...

[@Intergalactic2000]

What country are you guys from. Fantastic work guys.

[@ThePurposelesslife]

They are from Kerela,India

[@TomTom-lh1jm]

fantastik work guys, greetings from germany

[@notwocdivad]

Does no one "run in" newly re built engines anymore? I know Japanese bikes are different to the British bikes I am used to but reving an engine with new bearings and rings in is asking for trouble IMHO! They need to bed in to the surrounding metal!!

[@yepyepyep0099]

How many miles/kms had this engine done prior to the rebuild?

[@Stef4o82]

Absolutely fantastic restoration on Kawazaki ER-5, I have the same. You done it great😊👍. Absolute magicians😊👌 ans I like when you have started as well, it was great 👍

[@silviugligor2395]

same like en500 on kavasaki vulcan 1997?

[@paulfellows2094]

i love the sound of kawasaki awesome build nice one

[@steamwillrise]

Great video and you helped me out a lot but....how did you release the flywheel? I've got as far as removing the left hand threaded bolt. Still no movement

[@unokarpa4405]

чтобы снять маховик нужно закрутить болт м18 шаг 1.5

[@paulfellows2094]

fantastic awesome job well done

[@grintim6537]

запчасти и болты остались?

[@londonharlem3422]

very clear video timing is rite and im green in this atv gasme and its working for me thank u for this video gives me more courage ioo need ed

[@makabayanriders9516]

I have the same engine but I don't know where I can bring to repair..? 😥

[@janjezek9333]

awesome :-) Thank you very much for sharing

[@thomaslockley945]

I'm curios what the set up was tall had to start the engine off the bike all I saw was auxiliary fuel tube an was wondering how tall had a box wired up?

[@yusuf.manoga2292]

am in intrested in maintenance of all types of bikes can u help me

[@hugohugo6445]

Mr You are amazing... I like you

[@sakunisaumya363]

ඉක්මනින් වීඩියෝ දානකල් බලන් ඉන්නෙ ..එකක් නෑර බලනවා 🤗🤗❤️❤️ කරන පොඩි දෙයක් උනත් වීඩියෝ කරලා දාන්න..ගොඩක් ආසාවෙන් බලන්නෙ 🤗

[@rodaliar5022]

Well done brother 👍👍👍👍👍👍👍👍 Indonesia 🇮🇩

[@Pedro-bu8xd]

Hey mate (if you have access to a Honda CBX 250 Twister 2006 - 8) I would love to see an engine re-build... of even a total full restoration. Love the videos by the way!!!

[@pavelhitrov4044]

Like! What sealant do you use for the head gasket? )))

[@SekerBeset]

Good very nice👍👍👍👍👍

[@Wusses]

where you get Pair valve cover? any link or info ?

[@dimityrpetrov9623]

DO A RESTORE OF A KZ400 FROM 1979 PLEASE!!!!!! SALUTE YOUR WORK FROM BULGARIA

[@donnychrisvalen8276]

Build a frame for the er5 engine,keep it up brother🤘🤘🤘🤘

[@BMBM-bz7ed]

Rapaz vcs são muito bom no que fazem , esse motor deve ter ficado novo de fábrica kkkkk. Gosto muito de assistir os vídeos de vcs parabéns , e ver funcionando no final ainda melhor. Ok . BRAZIL

[@tigermuramatsu4605]

買いたい。素晴らしい！from japan

[@reinaldoalcantara3507]

Dude you are very good.. this engine is very difficult to disassemble here and the same as the CB 400 450..and very complicated congratulations for you very good work, where are you from?.. I'm of Brazil...

[@nguyenvandinhnguyenvandinh1444]

anh lam may lai giup em duoc ko cuc may hyosung bao nhieu tien cung duoc neu chay ngon la duoc

[@damianchytutos9334]

Amazing restoration man😎😎😎👏👏👏👏👏💪💪💪

[@Stratos1988]

Decent video but I would like to advise You to use torque wrench when tightening camshaft caps/journals as torque is a part of overall clearence for cams. Otherwise the may wear out to soon or you can loose some oil pressure.

[@mobiousenigma]

ive said it before and will again you do nice work sir! watching the teardown and reassembly of this 2 cyl ohv 4 stroke all i can really think of is the engineer worked too hard so many bearings shafts and chains to fail and wear just on the timing side of things a trip to the russian design beauro might be in order for theese guys lol .thanks for the video

[@horaciorivera4729]

Like always... excelent video brother.

[@toddwarren2015]

Nice work, and lovely video.

[@alielabdimarras7965]

Great Engine the EX500D, just build your own new cooling water tubes in stainless steel (the ones the go with o-rings into the head)

[@ezequielsilva2709]

Restauração perfeita, parabéns! 👍👍

[@CM-ut3wy]

👌🏼🤙🏼😼👊🏼awsome job my man ; i will send you my 454ltd to restore ; keep going the right path !! Regards From Costa Rica

[@leandroagle]

Can you guys share the list of parts replaced? Thanks a lot, great video.

[@arturomiranda2923]

Can you please restore a toyota 2e engine? hello and thanks

[@jaysonplacencia2285]

Thank you for this new knowledge sir.. I wish the next video blog is about restoring a inline 3

[@hondaman9424]

Can you please tell me that how much would it cost approximately full restoration for this engine (work and spare parts) in your country?

[@josebezerra7383]

Ótimo vídeo professor parabéns 👏👏👏👏

[@kolakowskiwiktor6133]

Супер, молодцы!! Привет из Belarus.

[@mikeszkoo]

Very useful, thank you my friend

[@dawnsabin-simpson8938]

Brilliant guys thank you.

[@erickomondi007]

Amazing, from Kenya...

[@Sylo2Nice]

Was that suppose to fall off like that? 17:36

[@petr_car_fix5828]

Thanks a lot , i think about buy one of er5's , usefull have a look inside its engine.

[@rafab2774]

17:08 All the job was definitely worth it 😍😍

[@sushilchaudhary176]

Which country from you belong I'm your big fan sir..b

[@zetembe111]

Will you do the same job for me if I ship my engine?

[@cesurozcan9815]

Hayırlı akşamlar dilerim ustam aynı mesleği yapıyoruz Bir kavasaki 500kl girank kol yatakları bozuyor yardımcı olursanız sevinirim

[@yeagerxp]

Excellent work👍👍👍. Thanks for sharing

[@TomBartram-b1c]

Seria mucho mas Impressionante si buviera seis botelas de cervesa muentras trabjando! Felicitationes/parabens!

[@hoedenbesteller]

Don't the friction plates in the clutch normally all go in the same direction? On assembly you inserted them clockwise and counterclockwise..

[@stefanocammardella1570]

Huge work! Congrats