Kenmore 70 series agitator repair

[@shalom8858]

Great video! Replaced these while replacing the motor coupler on my washer. Both were disentigrated and washer was a paperweight becuase of the coupler... Now the washer purs like a cat. 👍

[@ChristPaidOurSinDebt]

Whatever you do DON'T GET RID OF YOUR WASHER. They DO NOT make them like this anymore, all new washers are very cheaply made and DO NOT WASH well or use enough water. You will never be able to find something like this ever again! I repeat, whatever you do, keep your old fashioned washing machine as long as you can

[@stwings98]

I was convinced I was going to have to buy a new washer. You saved me a ton of time, aggravation and money! I ordered the agitator dogs online. Had the washer running ten minutes after the parts arrived. Thank you so much for your video! God bless you.

[@Jonrelgov]

Got the job done in half an hour (including cleaning) after finding this video. I’ll take a $12 part replacement over buying a new machine any day! Thanks for the great video Dustin

[@gamerforlife6682]

Thank you very much. I’ve had kenmore 70 series for 25 years. Still kicking it because of you. Works amazing.

[@gamerforlife6682]

Got the parts in. Turns to right and teeth grab with turn to left. That was an issue, but not entire issue. The motor spline stem the unit sits on is turning slowly. Maybe it’s finally trash. Whole agitator at bottom also does not turn at bottom.

[@CaptNemo_]

am really sad that i have to let go of my moms old kenmore 70 series heavy duty, i really like how it takes less time to wash and it actually turns the clothes around, not like the new impellers

[@gamerforlife6682]

@@CaptNemo_ these are not hard to fix if that is a consideration.

[@ChristPaidOurSinDebt]

Keep it as long as you can, you will not be able to find anything remotely close to it ever again. The new washers are agitatorless and built very cheaply. They are all computer controlled and break within a year or two. They do not make them like this video anymore. Whatever you do, keep your old school washer

[@1hotrodjim]

This video was amazing, I found it to see why my agitator wasn't working correctly and in no time I had it working like new. I have an appliance parts store that's only about a mile away and the price of the dogs was only about a dollar more than ordering them online. The other thing that was amazing is the washer and dryer in the video were the exact ones that we have! Also, the tile on the floor in front of the washer and dryer is the exact same thing that we have!!! That video could have been done in our laundry room, I wish I could add a picture. Thanks, Jim

[@johnmourgis8731]

This is my absolute favorite washer. Old school is wayyyyy better than the new junk.

[@charliesierra6919]

Thank you, sir! Love my Kenmore washer and it has served me well for over thirty years until I needed to fix this.

[@PeggyOwenSands]

This video was sooo helpful and solved our washing machine problems. Thank you so much!

[@googleuser3760]

Great video 👍👍 my dogs were in a million pieces. Thanks for showing us the fix.

[@angelacolonese2447]

The teeth on mine are worn down due to the digits worn out also. I did change the 4 digits. But I know it can work a lot better .How can I purchase and where I can purchase the teeth part . I don't have the part number for it. Can you help me out ??? Mine is exactly like this machine. I'm so excited I found your video because all the videos are on new machines and I love this machine . Ty

[@twisteddreams4345]

Tyvm man, I knew this couldn't have been too hard a fix...... my dumbass was stuck on the cap of the agitator, didn't even think it was a pry cap so tyvm sir

[@bionden1155]

Thanks. 5.30$ and 10 minutes of work saved me from having to buy a new washer!

[@rvinson3494]

Thanks for the great video Dustin. I was able to fix my washer no problem. And im a 65 yr old woman. 👍

[@DustinRogersinMO]

Sweet. Glad you got it fixed.

[@shanonco213]

Thank you for this!!! Got our washer fixed in no time!

[@johnluis8170]

Thank you for the video, I was able to fix my machine for 10 bucks 👍🏻

[@bishop_98]

I just ordered some dogs. Before i install them, im scanning them so i will have them to reprint if i ever need any.

[@CrimeSpies]

All 4 of my dog agits were gone 😳 There was 1 tiny piece left….I bet it’s been broken for years ‼️ Thanks so much 😊

[@timwhite9255]

We used to have a used model just like that and the agitator was starting to act like that one but the motor let out the magic blue smoke before i had a chance to fix it and i never did see how it works. Thanks for the info.

[@dalebraun5497]

thanks for this. I fixed mine today with these instructions.

[@DustinRogersinMO]

Awesome. Thanks for watching

[@robertskelton2576]

We have same Kenmore washer and dryer set. There about 30 years old but still work. Have done some of the same repairs. All these parts are still sold on ebay at a fraction of local stores.

[@Guitarsands]

Exactly the issue I was looking for !! I am certain it will be this exact repair solution ... thank you for posting !!

[@thaidouangkham5100]

I have the act washer an it wasn't agitating man thanks alot .

[@godinhocosta9067]

Thanks for your helpful video! Specially for a person on fix income.

[@Moffett55]

Great video. Thank you for saving me money 💰.

[@hammerrox]

This video is a great tutorial, thanks!

[@xxxxxxl8693]

Great video sir

[@DustinRogersinMO]

Thanks for watching

[@chris-samuel-cesar]

Thank you....

[@carloscorrea3191]

THANK YOU THANK YOU I DIDN’T EVEN KNOW I LOST THE RUBBER PEICES UNTIL I SAW THIS VID

[@carloscorrea3191]

ALSO I SPENT AN HOUR TRYING TO FIND A HELPFUL VID

[@StuffBudDuz]

Thank you.

[@spiritseeker1982]

I’m trying to fix the bottom agitator. It’s under the washer I guess I got to see what’s going on. My agitator is only wanting to go one way not back-and-forth

[@starrionx1]

I don't have a bolt in mine. There is a smooth metal circle at the bottom of the shaft, but no bolt or screw head. Is there an older model design? Every video says undo the bolt. It doesn't look like anything was broken off.

[@starrionx1]

So my assembly was square and screwed onto a bolt that was underneath the basket. I had to MacGyver a square approximately 3/4" to break the cage loose, and I was then able to proceed with a successful repair.

[@captainsenileinfo]

How long did they make the 70 series with the dark tub,?Like what year did they start.

[@DustinRogersinMO]

No idea

[@harolddominguez5905]

Hello Dustin! Thank you for making this video. My little plastic pieces were pretty bad and you really made it easy for me to do. I do have a question, do you have a video on how to work/fix the bottom agitator? Mine still will not turn from the base. I read where it might be the belt or coupler to the transmission. Any thoughts on that? Thank you for your time!

[@DustinRogersinMO]

There is a coupler between the motor and the transmission which is a common failure component. It’s a cheap part (amzn.to/3HuO0jn), but unfortunately I don’t have a video on replacing that. I know there are some videos on KZbin showing the process. It’s possible it could be a transmission issue too, and there are a few transmission rebuild videos available. The kit for that (amzn.to/3qJezKW) comes with the parts that typically wear out in these transmissions.

[@AT-bd5yr]

Hello everyone...I repaired my agitator dogs and it was working fine..few days later same problem...I check and the dogs are fine and counter clockwise the catch and do what they are designed to do...can anyone tell me what else can be the likely problem I appreciate you all so kindly

[@kennethe561]

You can just order agitator assembly and be one and done for these machines.

[@rosemarygarcia278]

Put new dogs in but still isn’t agitating correctly don’t know what I’ve done wrong.

[@AT-bd5yr]

Did u ever get it fixed?

[@markloper5400]

Poor guy... fixing the washing-machine and can't even get someone to hold the phone. Pitiful.