KENWORTH HEAVY -- Episode 91 -- 1080p @ 60 FPS!

sergei-dratchev.pixels.com
www.paypal.me/SergeiDratchev

[@jefftaylor7511]

That was some really smooth shifting!! What fun!!

[@chucktx5957]

Love the sound of a dragster KWhopper!!

[@myronhojsan4736]

Love the Formula 1 sound effects!

[@RickConley]

Sometimes, it seems that your truck and trailer spend a lot more time in the shop than they do on the road.

[@erniemansfield5973]

WOW. A Suzuki powered Kenworth. Can't get them over here.

[@ybarrafhtm]

Haha...I like that race car sound .

[@robkal56]

Sergei, sounds like all you learned is correct. Shimming hydraulic relief springs or installing stiffer springs is pretty standard. A new tire beside an older, worn tire will carry more weight due to being taller (i.e. more tread), so pairing new tires should be done whenever possible.

[@themadhillbillycustoms5013]

Good video. I hope kenworth can get all your stuff done in one day. I remember you said on another video you wanted them to look at your transmission and you were going to ask them about a mirror for your hood. I wonder if they can fix the exhaust cover on the passenger side that rattles? And thank you for the good quality videos. I really enjoy watching them in 1080p.

[@nerktwins7023]

One of the truest sayings in trucking....You take care of your truck you're truck will take care of you !

[@liberyone5185]

I thought at was at the Datyona 500 for a few minute. Did you stop for a pit stop?

[@larrypolk2378]

Thought you were driving your Mustang. I enjoy the details on the repairs.

[@doc559]

Will this have any effect on the dashboard readout that you said wasn't accurate?

[@Mr42960]

Concerning your hydraulics, the use of extreme low temperature fluid can cause a slight loss of efficiency in the pump due to its lighter viscosity. The fluid pressure in the relief valve can climb until it overcomes the spring pressure to control maximum pressure. The shim simulates a stronger spring by pre loading it. The holes in the valve just pass through the diverted fluid. Increasing pressure does not increase speed. That will be controlled by pump volume and if you can speed up the pump you will gain greater flow and speed. Maybe should have asked them to check your cylinders for leakage past the piston seal which could result in loss of lift force and speed.

[@Jesse-le9bh]

Sounded like a formula one car. I like. Good one Captain.👍

[@rodkneed]

Have Kenworth check that rattle on the passenger side exhaust stack too.

[@86Lebowski]

The formula 1 Kenworth.

[@toddnichols2990]

Love the quality of the video!!!

[@gregkeating4206]

Did you get new exhaust on the KW? Sounds Great!

[@earlwhitebread3]

I felt like I was watching a Formula One race when you were doing the fast forward

[@Mr42960]

In the US we can get a tax ID number and then purchase business expense items without paying the tax at that time. Nothing like that in the great white north?

[@david1967able]

we don't get it back, because we don't ever pay it.

[@buckhorncortez]

Depends upon what state your in and how the tax is classified. In New Mexico, it's not a sales tax. The tax is a gross receipts tax and the only way you do not pay the tax at the time of purchase is if the item being purchased will be resold and the tax will be passed on to the end user. In the case of tires, wheels, etc. - you pay the tax at the time of purchase as the tires and wheels are not being resold. The cost is then deductible from your income tax as a business expense. The tax is included in the cost of the tires and wheels - but you only get to deduct the cost when you file your taxes. You can't make blanket statements as sales or gross receipts taxes are handled differently by each state.

[@Mr42960]

I stand corrected. I have only done business in my home state of Ohio.

[@niemi5858]

In Canada there are two forms of tax on retail sales. The federal tax rate is 5% and the Provincial (Ontario) tax rate is 8% for a combined rate of 13%. Each province or territory has varying rates of tax from 0% in Alberta, the Yukon and North West Territories to 10 % in the eastern provinces. The retail taxes you pay are accounted for in the form of a credit against any taxes that you charge your customer and have to remit. Larger businesses file monthly and smaller ones quarterly.

[@bobmcl2008]

Sergei, great video. Save up and buy the best rims. My friend lost 2 car tires on Chinese rims due to of all things the valves failed. All your equipment is top of the line . Hope you keep it that way.

[@xle5363]

How many miles are on your trailer?

[@kjinohio5897]

Shocks wear tires like that? I'd think the scrubbing on turns would cause that.

[@davidschabel7832]

So many three day weekends turned into five days, but that was why we made the big bucks. Like the way you explain things, keep so many questions answered before ask, pull toy here.

[@gord2358]

Nice that you were able to get the work done by real professionals so you're not paying for them to figure things out.

[@GrantTravels23]

That's one fast lambo!

[@onyourbikeuoldfart]

I NEVER seen your truck go so fast, you must be on the happy pills. Lol

[@HHTV60]

The driving segments were speeded up by the factor of 4. So, when I'm driving down a peaceful Canadian city street at 60 KM/H or 40 MPH, what you experience in the video is a 53,000 LB rig with a 605 HP Cummins flying by at 240 KM/H or 160 MPH. Please enjoy responsibly ;)

[@michaelwuest9944]

Cool sound Capt., like Indian Applesauce 500!

[@billygreenhorn9275]

Holy smokes, the truck really moves ;) Where are the front aluminum rims from the Mack?

[@MrTrucker771]

👍

[@robertbradford2734]

About the most durable thing you can put on a trailer just powder coat.👌

[@_wrks]

GET KENWORTH TO CHECK THE PLASTIC AROUND YOUR STEERING WHEEL!

[@samraedeker8002]

I almost wet my pants watching this video. On the first move you got the rpms a little high 2 or 3 times , LOL. This was a fun one to watch. It will be nice when you are all aluminum. Keep up the great videos. Be safe.

[@davidanddiana7173]

Very cool sergei

[@MikeBrown-tw3jw]

When you speed it up like that, it sounds more like your Mustang. :-)

[@alexb.1320]

Hey Speed Racer! =-) Sounds like you found a decent hydraulic shop.

[@juergensbr4612]

Sergei´s Canadian Truck Simulator aka Formula One ;-)

[@TheRick2130]

tire are wearing on both shoulders, your tire pressure guy probably not putting proper air on that tire, shock problem usually produce cupping

[@waltermattson5566]

The Kenworth sounds like your car when you speed up the video. A lot more shifting though.

[@mhappy01]

More exciting than Formula 1 these days...

[@screamindemon811]

Well you know what the say " it costs big bucks to drive big trucks"

[@calvinjutila8270]

Sounds like motorcycle at Isle of Man. Tire price sounds like not Chinese. Good choice!

[@Torpedomtb]

Rotating Weight is more critical than stationary weight. The lighter the wheels the less it requires to turn them. so less fuel.

[@dclpgh]

Sounds like you are speed shifting a Lamborghini!

[@rdfl]

Paid Holidays are a great thing.....

[@dextermontgomery3126]

We have sales tax exempt for transportation for hire. We don't file to get it back because we don't pay it. We go to our service providers and vendors and setup our sales tax exempt with them.

[@canuck0442]

You should run all the driving vids at 60 fps...

[@Coyner4321]

Sergei, you should wash that poor girl! She's dirty! ☹️ But if the weather in Ontario has been anything like Michigan lately, it's been raining so much it's useless to spend money washing it!

[@peterroff8527]

Have you been watching motor racing.

[@jackb5802]

sounds like my vette

[@johnjanetcourant7517]

Dear Sergei, I’ve been watching you for a long time and have enjoyed your site. I believe you are a very good person thru and thru. I’m happy for you that are now an owner-operator. You are Bad boy when you get into that nice Mustang. Either the film speed was high or you were speeding🚓. Now I know it was the camera speed🤪. Sorry, about your trailer expenses. Stay safe, Sergei.

[@harryfroese6887]

G

[@mattwihlen9608]

Hey Sergei if you ever wanted to learn about hauling cars respond to this and I’ll send you my KZbin channel. Also I’d love to meet you and maybe do a colab together.

[@JUSTME-nk9zw]

Sales TAX?? Whats That? I never pay SALES TAX. WE ALL THAT- TAX EXEMPT FOR LIFE. at the storeS in USA...... BUSINESS'S JUST DONT PAY IT!!!! THEN SEND OUT TO GOVERNMENT WHAT?? THE HELL WITH THEM. SO DONT GET TO EXITED ABOUT YOUR SELF BEING SMART.

[@JUSTME-nk9zw]

Yes, Am thinking every time about you when Am not pay sales tax. I dont want to disappoint you, But I DO NOT!!!!. may be you do. Read the laws, me be just may be you be little smarter in your life.

[@buckhorncortez]

Okay Mr. Smartguy. You'd pay gross receipts tax (a type of sales tax) in New Mexico unless you were going to resell the item purchased, at which point, you'd forward the tax you've collected on the sale to the NM Taxation and Revenue Department. You can't NOT pay the tax on an item purchased unless you have approval of the NM Taxation and Revenue for a type of business that will resell items purchased and you need Non-Taxable Transaction certificates issued by the department in order to do that. A trucking company would not be classified as a manufacturing entity and get a certificate to resell items and the ability to purchase certain items without paying tax. Sales tax (or in the case of NM - gross receipts tax) laws are NOT uniform from state-to-state. You can't make blanket statements and then claim you're the smart guy, because, apparenlty, you're too stupid to understand not all states are the same.

[@JUSTME-nk9zw]

Who told you I live in NM? In my state (EASTERN US) WE ARE EXEMPT. Thats why I dont live out west. Get a life, and I need to ask the state what I can buy with tax and not to buy, Screw that.