Keurig Has No Power I Removed the Cover and Fixed for FREE

[@bellefancy]

For goodness sake, thank you! Finally this question is answered in a sensible manner. Trying to find someone to tell you how to take that cover off is very difficult. If KZbin gives awards to people that make a video that actually tells you what you want to know in a clear, concise manner without making you lose the will to live, then you should receive that award. Thank you again.

[@CarveTools]

I think that the cover was not intended to be removed and people would just buy another Keurig. Although difficult to remove it can be done and sometimes all that is needed is for the thermal switch to be reset. Thanks for the kind comments!

[@jjsauceprime6795]

I picked up this same machine at a local thrift store, in brand new condition for 13 bucks, plugged it in, no power, found your video and had it fixed in 10 minutes. It’s currently going for $219 on Amazon. Instant channel follow!

[@CarveTools]

Glad this helped. Thanks for the comments!

[@-LivelyLimitless-]

Ugh yes I just bought mine for $1 know I’m trying to fix it 😂doesn’t turn on

[@onewhoserves8264]

Same

[@LouisRossignol-t7r]

Damn bought mine for 14

[@Aaronsworld40]

I was trying to descale my Keurig Supreme Plus and I guess it overheated and machine stopped working. It will not power on despite holding the 8oz and 10oz buttoms together for 5 seconds or pulled the plug and waited 15 minutes. I was 10 seconds away from tossing it out my window until I found this video. I managed to unscrew 3 phillips under the machine, pried open the case (which was difficult), but I didn't care because I was going to toss it out the window anyways. Once opened, I located the thermostat with a hole in the middle. I stick a sim card pin in and felt the "click". I plugged in the power right away and BAMMMMMMM.....IT'S ALIVE! IT'S WORKING AGAIN. EASIER THAN ANTICIPATED AND IT WAS AWESOME!

[@texasbuttercup1972]

What a GREAT video, Dave! Thank you!!! I especially appreciated the "fine details" and video of you going through EVERY step! This is particularly helpful for those who have no idea how to fix anything. You are a SUPER HERO! Thank you! 🏆🏆🏆🏆🏆

[@CarveTools]

Well, I'm not a hero but so glad this helped. Another Keurig brewing coffee again. Thanks for the comments!

[@petercharles53]

I am a pretty under confident DIY person but I followed your video closely and repaired my machine. Thank you!! The removal and replacement of the case was tricky but doable with your great tuition.

[@CarveTools]

So glad to hear another Keurig saved. Thanks for the comment.

[@MarcCoyle-j8o]

Thank you for taking the time to record this, easy to follow and coffee is brewing again. I hope the folks at Keurig are ashamed for making a product with a known fault, not informing the customers and happily letting them go to landfill so people can buy another one. Luckily there are folks like Carvetools still fighting for the good guys...

[@robh2255]

Excellent tutorial! Used it to take apart my wife's Keurig. Pushed the reset button and all is working again. Thanks!

[@DianneTucker-r2n]

Thank you so much!!! I viewed several videos and yours was the winner. The hardest part is removing the cover. Your demonstration and explanation are perfect. I was able to fix my coffee maker thanks to you. I have only had it one year and was not happy when it did not work. My problem was my own fault and occurred because I had pushed the start button for a cup of coffee and realized there was not enough water. Not thinking, I grabbed the reservoir to fill it and overheated the machine. Now I am going to enjoy a cup of tea! Thanks again!

[@CarveTools]

I'm so glad this help make the repair. Enjoy your coffee and thanks for the comments!

[@RudyHernandez-o5q]

Marvelous! I was finally able to take the cover off and fix my keurig. You Sir deserve an award. Thank you!

[@msbeyer]

I can't thank you enough for making this video. I thought my unit was toast! I tried to make a cup of coffee with the water tank removed and it smelled burnt and wouldn't power up. I have a model K921 and only had to get the cover off. Once open, I was able to see the thermal switch and used a large paperclip to poke it to reset. I didn't have to remoave any parts. I am so happy I don't have to spend $150 to replace it. Thank you, you rock Mr Carve!

[@henrysu606]

Thanks for including the info about checking the pump motors! I had two units where I reset the thermal switch and they immediately tripped when trying the first brew. Both sets of motors were working but there was apparently air in the lines and they did not draw water. I was able to prime the lines by separating the top line from the 3 way connector on the left side of the machine and using a squeeze bottle to fill the small compartment with a bit of water. Once I did this, I could run the motors and fill the lines with water before resetting the switch one more time. Both units work great after a descale cycle. Also note: My motors were labeled and are indeed 12 volt motors. I found that a standard 9 volt battery is enough to power the motors for testing.

[@bkujaws]

This did the trick! Amazing. I was so happy to be able to fix my machine. Kudos to you for the astute diagnosis which few would have the expertise or patience to do. I ended up using a thin finish nail to reset the thermal switch. Thank you for adding the disassembly process - super helpful. Can’t thank you enough for such a thorough and thoughtful video.

[@Ransome27]

Your video was clutch! My wife’s Keurig just stopped working one day after a few months. Watching this with the tutorial, made my fix that much easier. Wife has a working machine and I look like the hero. Thank you!

[@CarveTools]

Yes, you are a hero! Thanks for the comments.

[@chriselton1915]

I followed your well detailed process. It fired up, but when I press brew it dies again. Any ideas?

[@alalvey]

Of all the DIY videos I've watched and followed, this ranks towards the top - if not at the top - as it saved my daughter $160+ by returning the replacement she bought me from Target (note: CostCo has a much better, and cheaper, deal) for Father's Day 2024. At the risk of being presumptuous, I have a few refinements to offer: 1) when re-assembling, I suggest you start at the front (rounded) part as the studs on front align the clips on either side, then clip the left side in before doing the same on the right side as it just seems to come together easier 2) if you have them, use automotive trim tools to pry the exterior cover off to avoid as much as possible dinging it with a metal tool (Hobo Freight has a great kit for a few dollars) 3) my Supreme Plus TAS while descaling because I hit the "K" (brew) button when the machine told this dummy to "add water", which most likely tripped the thermal switch/sensor 4) if you find stray bits of broken plastic comingled in with the coffee grounds kicked loose by disassembling the machine, don't fret as like with auto interior parts, plastic doesn't like to be disturbed post-factory, but unlike with a car nothing is going to rattle while using your Keurig I'm not a design engineer, but I wish Keurig would've figured out a way to externally re-set the thermal switch/sensor without having to partially disassemble it. They may have thought of it, but could not place it somewhere externally accessible and still serve its safety function. Time for a cup...

[@CarveTools]

Great suggestions. Thanks for the comments.

[@richstell]

Thank you so much for posting this and saving several of us from the headache of finding a service center and paying to have fixed or even buying a new one. The cover may have been hard to get off but with patience I managed it and now the coffee pot is working again. Thx again.

[@CarveTools]

Glad this helped. Thanks for the comments.

[@laurencampbell1960]

Unbelievable. Woke up this morning, made coffee and it just steamed without any liquid coming out. Thought I was doomed. This worked like a charm. NOTE: for the simplier less mechanically inclined people, I didn't have of of the eletricity parts and it worked fine. To reset the switch all I used was a staple (without plugging the tester in). Also, didn't test each section like he did after resetting. I just tested it before putting it back together. Works like its new. THANK YOU!

[@CarveTools]

Glad this helped. Thanks for the comments!

[@katieevans5982]

Most helpful video out there! Thank you for saving us from having to replace the darn thing!

[@carriemusgrove4540]

You saved my life!!! My mom wanted me to clean her keurig and she wanted me to use vinegar, after I ran a few cups the power was gone and I thought I was going to have to buy a new one so I started googling in hopes to fix it because I don’t get paid until tomorrow! I found this video right off and BAM it’s working!! You very informative and I greatly appreciate your help and video! Thank you!!!

[@CarveTools]

So glad this helped! Thanks for the comments!

[@aaronsilvers300]

Excellent tutorial! My Keurig had a split and leaking hose right under the water pump. The thermal switch was tripped due to no water. Amazing the board did not short. Anyway, swapped on a new hose from an old Keurig and reset the switch. Back in business. Thank you. I didnt break the cover because of your help ( : Have a blessed day!

[@walterwilliams268]

I am usually pretty good at disassembling things but this machine was killing me….wow are you a genius 👏✊ well done indeed. Thanks and God Bless 🇺🇸

[@CarveTools]

Glad this helped. Thanks for the comments.

[@doniedodson]

I almost threw this keurig in the trash, but i saw your video today and now it works like new! Thank you so much!

[@CarveTools]

So glad this helped. Thanks for the comments.

[@terryvalentine1634]

So happy you did this for us!I just finished fixing my Keurig thanks to you! Love this. My only problem was the front did not fall off like yours did and a little trouble finding the thermal thing.

[@EvanHFarr-bu9qt]

Had this exact problem and followed this video and it worked! Mine overheated because while descaling I forgot to add water at one point when it needed; it smoked and apparently overheated. Mine is a slightly different machine but I took everything apart just the way he said and found that little switch to reset and it did the trick. Thank you!

[@socratese71]

Thank you for the video. I was able to fix mine by resetting the switch. Mine quit working all because the water reservoir wasn't on quite all the way. When it started heating up, I guess it tripped it. Glad that was an easy fix. Broke a tab or two but better than buying a new one.

[@CarveTools]

The cover was really not designed to be removed. They want you to buy another one. Thanks for the comments!

[@chrislee5381]

Life Saver! Was about to toss this in the trash until I saw your video. Appreciate it!

[@catherinewilsonrealtor8681]

If only everyone could watch your Keurig videos. I'm sure many Keurig's would be saved! 😎

[@CarveTools]

Well, their sales might go down if they are repaired and not tossed. Thanks for the comments!

[@tinadelacuesta6425]

Thank you very much for this video. Was descaling my Keurig and would not power on. Watch your video which was very user friendly and it now powers on. Saves me from buying a new Keurig

[@CarveTools]

Great to hear and thanks for the comments.

[@jamiecaudill5915]

Followed your advice & it’s alive again!☕️

[@billbryant1288]

Thanks! Very helpful. My wife was taking ours to the trash. Now I'm her hero!

[@CarveTools]

Wonderful! Another one saved. Thanks for the comments!

[@erikthepitmaster6116]

Very nice video. Good pace. Useful comments, Nice camera angles and overlays. Coming from someone who has been repairing for 60 years, Bravo!

[@CarveTools]

Thank you very much!

[@StMickeyS]

Fabulous video, well done, and I was able to fix the Keurig. This happened when my wife tried to descale the unit. I reset the thermal safety switch thanks to your instructions, the coffee maker is working but the descale mode still on. I have to figure out how to reset the descale mode.

[@davidgreer4790]

I bought a K-Supreme Plus from an Amazon returns store. It wouldn’t turn on. I followed your video and now I have a working coffee maker!

[@SashaSpells]

I was incredulous that this would work, and had even less faith that it was something I could do. But, I was wrong I figured it out and it worked!!! Woooohoooo!!!! ☺️☺️☺️ thanks so much! Just saved us over $100 replacing our hardly used Keurig.

[@CarveTools]

Well done! Thanks for the comments.

[@b2thehend680]

Thank you very much! I was in the descaling mode and let the tank run out of water and it just died. Saw your video and now I don't have to spend $180! I guess since there was no water flowing it overheated. Followed your steps and I'm back in the coffee drinking business again!😃

[@CarveTools]

So glad this helped! Thanks for the comments.

[@11LWH11]

Subscribed! Thank you for the instructions! I had this exact same issue. Of course it occurred when I was trying to descale the coffee maker. I think I ran too many cycles and it tripped the thermal protection switch.

[@CarveTools]

So glad this helped. Thanks for the comments!

[@dabiggestgwarfan]

With the help of your video, I just fixed my machine! Many thanks!

[@CarveTools]

Glad it helped! Thanks for the comments!

[@sxfrider53]

Problem solved. Thank you. The disassembling instructions were key. Already knew what I was looking for inside, just didn't have a clue on how to get inside without destroying something.

[@CarveTools]

Glad to hear. I don't think this cover was intended to ever be removed. Thanks for the comments.

[@sxfrider53]

@@CarveTools It's still working 😎 Thanks again.

[@mikegeeen]

Excellent! Thanks so much. I'd found a different video that I started first, but it was pretty horrible. I really appreciate the easy going voice coaching you do here. I freaking hate doing this kinda stuff and it helped me out quite a bit listening to you walk through this like it's no big deal.

[@MortezaRajabi-ko2vu]

Thank you for your precise and simple explanations, which were completely useful.

[@MarijanePeterson]

Thank you so much for sharing, we were going to give a senior friend our used Keurig. After taking it out of storage it didn't work. We followed your instructions and now it works perfectly.

[@CarveTools]

So glad this helped. Thanks for the comments!

[@DSKSD2ON]

Thank you! Thanks to your video I was able to fix my Keurig and I am annoying my cup of coffee now!

[@CarveTools]

Great. I hope that coffee is being enjoyed. Thanks for the comments.

[@MarciaTillotson]

Thank you for providing this video. My thermal protection switch was located in a different spot but I was able to find it and reset it. Now I don't have to purchase a new Keurig .

[@CarveTools]

So glad this helped. Thanks for the comments!

[@axemon2000]

Thank-you!!! I did exactly what you suggested and my K Supreme is working again!!! For free...!!

[@Je360guy]

Keurig must design these to force customers into buying another one. Otherwise what's up with the hidden reset button? Most hair dryers and many other electronic devices have overheat protection the consumer can reset, in 10 seconds or less. Those that don't automatically reset after a cool down period. In the morning after the descale procedure, I found my Keurig had flatlined. It was unresponsive and I could not save it. Oh no, coffee withdrawal! Your tutorial saved the patient. I performed the operation as described. The most difficult part was opening the patient's chest to get at the vital organs. I only wish my surgical professors in Med. School were as good a teacher as you are. You should get an award for saving the lives of countless coffee machines.

[@CarveTools]

Removing the covers is the most difficult part. A self-resetting thermal switch would likely not pass the UL requirement for this appliance and here we are trying to figure out to buy a new one or can we fix it. Glad this helped and thanks for the comments!

[@hollymarieverret6525]

I agree that they built it not to last.

[@TiffanyWesson]

Done! Thank you! I use to use my machine just about every day then stopped for a lil while. Thinking that’s why the clog happened or someone was using non filtered water in it. I did not have a volt exchanger to use, yet I was able to fast pinch the tube above chip board right as the pumps started to run. Giving the pressure force to push the clog open. And it has been running since! Thank you dude!

[@CarveTools]

Good job! Another one saved. Thanks for the comments.

[@AndreBellCopywriter]

Thank you. Your tips for dismantling in this video and your " Keurig Coffee Maker No Power Fixed for FREE " video helped us to reset the Keurig without having to replace yet another failing Keurig. Fortunately we did not need to remove the sensor reset. Just reached in with a paper clip and reset it and the thing worked immediately. Now moving on to figure why it keeps going into descale mode every third cup despite having descaled the thing. No clue. thx x2

[@CarveTools]

Glad it helped! I have no clue why it would want to keep descaling. Thanks for the comments.

[@dontcrymary]

I had one of those small Keurigs from Walmart. Ran out of water and tripped thermal protector. I was gonna throw it anyway but decided to take cover off (it broke) and just used a safety pin to reset the thermal protector and it works! Keeping for emergencies since I broke the cover. But it works again!

[@dedrawilliamson7648]

I followed your instructions and my Keurig is working again! Thank you for the video ❤

[@CarveTools]

Wonderful! Thanks for the comments.

[@BillLeFevre]

This video was perfect! Fixed my Keurig in about 20 minutes. THANK YOU!

[@CarveTools]

Glad it helped! Thanks for the comments!

[@dougcampbell5119]

I consider my self a well educated gifted high level DIY. This Video on a scale of 1-10 is a solid 10. The instructions for dismantling the Keurig K-Supreme Plus are 100% clear and accurate. I had to remove the circuit breaker to reset it, but power was restored after the reset. Not sure why the manufacturer refuses to incorporate a circuit breaker that can be easily reset from the back of the machine for an ongoing problem that has been an issue now for more than several years, I know why, it would make sense Thank you CarvTools for sharing this valuable Video👍

[@CarveTools]

Glad to hear this helped. Thanks for the kind comments!

[@donjeppson8123]

Thank you very muchfor the two videos on the K920. Helped fixed mine.

[@CarveTools]

Glad it helped and thank you for the comments!

[@jchovernut]

My water tank cover had some water in the lip, & that caused an air/water seal to form around the periphery, thereby restricting the flow of water into the machine during a brew cycle. I believe that low/restricted flow caused my over-temperature condition, tripping the thermal sensor. I wish it was like my furnace where it resets when the temperature reduces below a safe margin. It’s a PITA to take the thing apart to poke a wire into the thermal trip to reset the darned thing! I’ll be drilling a small vent hole in the water tank lid so this doesn’t happen again!! Thanks for the nicely-done video; very informative!!

[@CarveTools]

Glad this was helpful. I think the covers were never intended to be removed. Thanks for the comments!

[@brucebrande1143]

I wholeheartedly agree with all the positive comments below, so all I can say is 'ditto'. One question, though. My problem happened when I accidently tried to brew a cup of coffee with a dry reservoir. The Keurig has often warned me of a low water level and refused to operate until more was added, so I was surprised that it did not balk at a no-water condition. Any thoughts on that?

[@montehartman9112]

Great video - I really appreciated the manner how you spoke through the video and the instruction provided!

[@robertrice8759]

Success I fixed my coffee maker with your video by re setting the sensor I think mine overheated because water was dried up from months of non use But I went one step further by using a small holesaw to cut access port so I won’t have to take it apart next time!!!!! Also primed the water lines by pumping the water tank up and down about 25 times

[@CarveTools]

Wonderful. I think because my Keurig was not used for a few months is why it also overheated. Thanks for the comments.

[@michaelgilroy1277]

Excellent video. Helped me fix my issue with the Keurig. Was tough getting that darn cover off, but all went well after that. Thanks again!

[@CarveTools]

Glad it helped! Thanks for the comments!

[@divvy587]

I did exactly as you showed in this video and everything worked! Thank you so much for the helpful video! But alas as soon as I tried descaling it shut off again with the same issue. Any other ideas on what to do?

[@CarveTools]

Maybe fill the reservoir and place it on and off several times. It may be like priming a pump to get the water flowing. Hope that helps.

[@johnhamner1667]

Best follow along video because without it I imagine I would have broken some panels!

[@CarveTools]

The covers probably not intended to ever be removed. Glad this helped. Thanks for the comments.

[@TajMolling]

Thank you for this video! I have mine apart right now and its currently turning back on which it has been dead for a week! now to start testing to see why it died ! the thermal protection switch was the key to getting back on now to see why it shut off in the first place! thank you!

[@CarveTools]

Glad this helped. Thanks for the comments.

[@jmccloy]

I’m having trouble getting the top cover off, any tips?

[@VTJulep]

My Keurig Supreme Plus only has a single water pump with an “air pump” - according to the control board - up on top with a smaller hose(I believe this device just opens up to atmosphere to allow the pump inlet line to lose suction - like a slit in a plastic drinking straw). I took the smaller hose off the air pump device at the top and ran the water pump - with a separate 12v supply like this video suggested - WITH the smaller hose PINCHED. I did this to verify my water pump was good. Then I reconnected the hose and wires at the board. Thank you for this video AND the bonus details on Descaling - I went through the descaling process last month without entering Descaling Mode, and I think the machine thinking it still needed to be descaled may have led to the issue of overheating…maybe programming? 🤷‍♂️

[@CarveTools]

Glad to hear another Keurig fixed. Good job and thanks for the comments.

[@andyb6140]

Great Video - Thanks - fixed my issue and I am now enjoying a fresh cup of coffee !

[@CarveTools]

So glad this helped. Thanks for the comments.

[@johnnyspud]

worked like charm. Thank you for the detailed instructions

[@DoItToProveIt]

Thanks, brother! My wife picked one up at the thrift store, too, and it wasn’t working:) Appreciate the help!

[@CarveTools]

Glad this helped. Thanks for the comments!

[@JenCole-z1d]

Yay, recent widow here and my husband would have fixed it. No choice now and this was easy and it’s working again.

[@CarveTools]

Glad this helped. Thanks for the comments!

[@hanzischultz9284]

Very helpful repair demonstration. It saved me $170. Thank you Mr. CarveTools!

[@CarveTools]

Glad to help and thanks for the comments.

[@BartonKashmer]

Thanks! Mine works again, time will tell how long that fix will last. But it saved us buying a new machine this week

[@CarveTools]

Hopefully it will last, just do regular descaling. Thanks for the comments.

[@Motherhubbard170]

The descale mode is a huge pain in the neck; it never stops flashing no matter how many times you refill the water and press start, it keeps going until it eventually trips the machine; I too was going to throw it out until I watched this video, best ever , and of course it worked, I didn't have to undo the reset part, merely used a paperclip, heard a loud clip and it all reset.

[@Bigguy2227]

How do I shut off descale after I run vinegar threw

[@dsdiesel8667]

So here I am at 7:20 running behind wanting coffee with my keurig torn apart, mine is the ribbon cable that feeds power to the screen has a short, I can move it just right and it powers on.

[@AW-fc9jt]

that dang thermal trip! im sure thats what happened to my last one! great video and great radio voice! if you're not in radio you should be!

[@CarveTools]

Thank you for the kind comments!

[@rayryeng]

This also worked for me! We were about to return ours! You're a life saver! Thanks!

[@CarveTools]

Great to hear! Thank you for the comments!

[@ddegrace8965]

Thanks for posting this it was very helpful. Everyone should be aware, in the struggle to get the covers off (and it is a struggle), some clips will probably get broken but should be okay when it’s reassembles. Better than throwing the whole thing out.

[@CarveTools]

Glad it was helpful! Yes, the cover is difficult to remove. Thanks for the comments!

[@92fergy]

This video was very informative! I opened mine up and I don't see the large green wire that yours has. Is the ground wire always green?

[@CarveTools]

On mine the green wire is a ground that attaches to the thermal switch bracket. Hope that helps.

[@victorm.vasquez1621]

Thank you! Opening it was a nightmare but it all worked out. Thanks again!

[@CarveTools]

Yes, getting this puzzle open is the hardest part. Thanks for the comments!

[@63mrl]

Thank you for posting, I was able to get my Keurig K29 working again.

[@CarveTools]

Great to hear! Thanks for the comments.

[@rickyisael86]

Hey Dave! Thank you for this video, it helped a lot. Mine was the same, no power. But after I reset it like you explained, It turned on! BUT, for some reason, when I tried to brew something after repairing, it started warming up and then it shut down again, just went black without pouring anything. Now its back as before, no power. Any ideas?

[@CarveTools]

I'm guessing the pump needs to be primed to get the water flowing. It starts heating without water circulating and then overheats.

[@sarahbraim4987]

Thank you!!! Resetting that I got my coffee maker working!! 350$ save!

[@zhuoqunwen8429]

How can I remove the top cover…. I used up all my energy and make a huge crack but it is still tight and not coming out…😢

[@richardjackson1745]

Great video! Thanks so much for sharing... saved my coffee maker and this morning I'd like to think in a small way you saved my life.. not good w/o coffee. :-) Cheers!

[@CarveTools]

Wonderful! Glad this helped you get that morning cup of coffee. Thanks for the comments.

[@CC-gu3ze]

Why in the world would you have a non-externally-resettable thermal switch other than for planned failures and replacement? This is the kind of thing regulatory bodies should investigate. Keurig needs to be fined for putting out these pieces of garbage. Mine is less than 6 months old and tripped this switch. DO NOT BUY THIS MODEL.

[@CarveTools]

I've never had an appliance so aggravating. I am guessing this is a safety device and if it reset automatically after cooled down and the power was still on, it would start the cycle over again. Probably a fire hazard and would not be good if left unattended.

[@hvon940]

Yes for sure

[@blake9403]

Thank you a million brother you just saved us $300 much appreciate your video

[@GS17403]

Money grab by Keurig under the guise of safety. Yes, the Thermal Fuse is a safety device, but if the pump system on these worked appropriately, the fuse fail wouldn't occur this frequently. And if you want to give Keurig a pass on that design then having a thermal fuse that's buried in the guts without an external reset button is inexcusable.

[@LindaPoulton]

great instuctions, love your channel. I am back in business with my coffee. thanks a bunch!

[@CarveTools]

So glad the hear this helped. Thanks for the comments!

[@mikeyriley8959]

Thanks, it worked great and I didn’t take out the thermal switch like you said. But I broke a clip putting it back together 😅

[@CarveTools]

Glad you were able to reset the switch. Removing the cover is the most aggravating thing ever. Thanks for the comments!

[@dogman8436]

Drilling a hole in the right side would give easy access to reset in future. Anyone have measurements for hole on right side?

[@stuartist]

How did you get the water to go through?

[@jskanda1]

Does the Keurig mini one cup have a thermal switch? I fixed my K_Supreme thanks to your most excellent instructions and now my mini is doing the same thing but I can't see the thermal switch. Sad face.

[@CarveTools]

I'm not familiar with that one but all of those coffee makers should have a thermal switch. This is a safety device. Hope that helps. Thanks for the comment.

[@bangonpongsuwan5243]

Thank you for showing how it’s very clear and easy to follow thanks again

[@CarveTools]

Glad this helped. Thanks for the comments.

[@c1i9v9i9c]

Thanks for the video! I will try it this weekend when i have time. This is total bs, and really not worth the hassle. I wish costco could have warned us first.

[@CarveTools]

This is one aggravating appliance. Thanks for the comments.

[@rubisguitar]

Worked here. Thank you for the video! Awesome

[@lisaa6681]

Thank you for posting this! Ours is now fixed! Cheers!

[@CarveTools]

Glad this helped. Thanks for the comments!

[@ddg2527]

Thank you, followed your instructions and it worked like a charm. GREAT JOB.

[@CarveTools]

Glad it helped! Thanks for the comments.

[@korridriscoll4137]

Thank you for making that as easy as possible

[@steveklein4367]

I drilled a hole in the steel/plastic cover at the exact measurement needed to access the heat switch reset button. I won't provide the measurements because you need to get the cover off before doing this, otherwise you'll likely drill a wire. Then when it's off, you can measure for yourself and de-burr the steel hole with a philips bit on a drill. Takes a little while because the steel is tough. I did a 3/8" hole so I had to walk around the hole with the bit until it was smooth; if your hole is smaller than your philips bit, you may not need to do that. I wanted a larger hole so I could more easily see where I'm poking.

[@CarveTools]

Wonderful. I thought about that but kind of cautious someone might get shocked. Thanks for the comments!

[@farmerjones5233]

Hi Dave, great video! You’re a great teacher too!👍. I’ve got the Keurig Supreme, not the plus. Did a descale and I think I overheated the thermostat. Will have to try the reset trick. Question. What caused it to pop the thermostat before you tested the motors after the reset? Did it just need a descale? Doesn’t your unit have an indicator telling you to descale? Thanks man. I subbed. I also love that little adjustable power source. Great tool. I’m going to see if I can find one. 😁

[@CarveTools]

The thermostat originally tripped when first powered up after not being used for some time (months). Might be a good ideal to descale the Keurig before putting storing it away. Thanks for the comments!

[@anthonygasparini1734]

Very informative video. Thank you so very much!

[@patsRed-q6j]

😊 Thanks because of your video I got mine working again in ten minutes

[@CarveTools]

Fantastic! Thanks for the comments!

[@briandubeau3307]

Well I know this sounds crazy but I had done the descale on the unit and used Keurig's descaler and the next day it couldn't pump any water out, so I watched all the videos couldn't find any solution so I figured it can't get any more broken than it already is. I started a brew cycle and started giving the top of it a good wack and the next thing you know out comes the water. I guess somewhere up inside the lid it was blocked from buildup from the descale process .I then resorted back to good old vinegar and water and its been fine ever since. For those of you Star Trek fans as Scotty said the more you complicate the plumbing the easier it is to stop up the sink LOL

[@DavidPatton-hw6th]

Thanks for your video only took 30 minutes and it was up and running!😊

[@CarveTools]

Glad it helped! Thanks for the comments!

[@lisawatson5037]

My unit just like this one is working but when I make a cuppa coffee, the multi needles splash all over the place it doesn’t come down in a single stream. Could you tell me what the issue is with that? Thank you for your video

[@CarveTools]

Sounds like the needle is clogged. The cup and needle can be removed and cleaned out. Hope that helps and thanks for the comments.