Element Enduro Sendero RTR Upgrade Series - Installing SSD Brass Weights

[@Brian_Mowry__BMOW71]

Nice upgrades! SSD sure does make nice quality products. I like the color of them and I like how the rear weight holds the axle bearing in place.

[@RevolutionX]

Yep! Glad I waited for SSD's stuff. I've always had good impressions of their products.

[@mickd8188]

Thanks for the update and info... that colour is way better than a brass finish. Look forward to Thursday to see how it performs. Have you bought many goodies for your capra yet? Bought my capra last weekend, but still building my umg10.. Cheers mate

[@RevolutionX]

Yep, that's why I like SSD stuff. I like a more understated look. Thursday will be a good watch! Next Thursday will finally see my UMG run lol! With all these releases, I sort of forgot about it. I need to start upgrades on that one though. I have not bought any upgrades for the Capra yet. I'm building it box stock for now, and letting the aftermarket mature a bit more to see what I like.

[@tjenkins1126]

Little truck is soooooooo capable, but agree, needs that bit of wait down low. Swapped mine to white springs all around, little floppy at high speed, but creeps over rocks like a spider. Super happy with it. Just need to get my trx4 sport a little more dialed, then on to a Capra 👍👍 It never ends, haha Great how to man. Been lurking on rcc and have read a lot of your stuff. Almost bit your bom cage idea, but went with the flat bed.

[@RevolutionX]

I'm going through my Capra build right now! Yeah, the Enduro is definitely a great platform though. Running video with these upgrades on Thursday! Stop lurking on RCC and participate!

[@VoidXRC]

Nice upgrades for it

[@RevolutionX]

For sure! SSD makes quality parts!

[@TonysRcTechboom]

I've got to say the Brass upgrades look sweet, fantastic pieces of kit, hopefully it will give you the weight you want, awesome Build and information video bro, I really enjoyed every minute 👍😎👍

[@RevolutionX]

They definitely did what they were supposed to! Thanks for watching!

[@souledoutrc8174]

Looks like the upgrades worked giving it more weight down low great 👍 stuff bro

[@RevolutionX]

It sure did! SSD Knuckles next when they release them!

[@12R1rcbashr]

Hell freakin yeah how did i miss this video great stuff man happy bashing bud.

[@RevolutionX]

How're you enjoying your Enduro so far? If you go to my main YT page, scoll down and there will be a section for Build & Upgrade Series. Look for the Enduro one there, and it should have videos of everything I've done to my Enduro so far.

[@CarminesRCTipsandTricks]

Oooooh pretty!!! 😁 Those Knuckles look like quite a CHUNK of Brass! Should give a performance increase... But of course you already know that, because I'm months late! 😜 I've HEARD that SCX10 II Chubs fit the Sendero Axles... Do not know if that's true. If so, that opens up many possibilities to add weight and strength up front. After seeing several Videos on the Element today, one common theme is: positive Caster is LIMITED by the Drag Link... I'm going to try putting the Draglink up FRONT. 😲 May work, may not. I know I'll have to move the Steering Arm to keep correct geometry... But I want to experiment. Without the Draglink in the way of the Driveshaft, I should be able to increase Caster for better stability and side hilling! BTW, I'm going to share these Videos with some noobs.... Even though I know what I'm doing (most of the time!), I've enjoyed your Videos, because your explanation and illustrations of HOW to do things is so clear and thorough!! 👍👍👏👏👏👏👏 You can really help people a lot more than the big Channels, who sometimes seem like they're BORED, and skip past things that people with less experience NEED, and usually are too proud or shy to ask. See, I KNOW I don't make great Videos. Some of the million Subs Channels THINK they make great Videos! 😖 They're just popular, and forgot they have a little responsibility for the new guys. You do quite a service! I don't know if you know that. Carmine ✈🚂🚙

[@RevolutionX]

🙏🙏Thank you! That's exactly why I do these. I know there are a lot of newcomers that are afraid to wrench on their rigs. These are meant to kind of help them as well as a reference. I've so far kept my drag-link in the stock BTA setup, but my other Element, I might put it in front.

[@CarminesRCTipsandTricks]

I don't know if it will work or not... But isn't that why we mess with these?? If it's a complete fail, nobody or nothing gets hurt but our pride!

[@trashPanda416]

Great how tooo!

[@RevolutionX]

Thanks! Appreciate you checking the video out, and I hope it becomes useful for you!

[@stevewest7260]

Anyone try the Xtra Speed Cantilever Kit yet ??

[@RevolutionX]

I've not tried it out yet. They've had one out for the SCX10.2 for a while now, and they just released an Enduro one. I'm not sure if I'll try it out, but I might!

[@ozboy8144]

Awesome upgrades.👍Did u have to offset the front wheels at all?

[@RevolutionX]

I run aftermarket wheels, but I didn't have to change anything at all. There aren't any clearance issues with these knuckles. I've always been happy with SSD products so far.

[@ozboy8144]

@@RevolutionX Alright sweet good to know 👍👍

[@sam97eck]

Great video 👍👍

[@RevolutionX]

Thank appreciate you watching! ✌🤙👍🙏

[@RCsBigAir]

I really like how slick those brass upgrades look, really adds a lot to the vehicle (Pun not intended. he he) And of it looks like it worked.

[@RevolutionX]

Oh yeah! They definitely worked! Thanks for checking the videos out!

[@RC1oNeTV]

What a interesting video~!!😄😃🤩👍

[@RevolutionX]

Thank you! 🙏👍🤙✌️

[@operation11charlieinc]

Awesome brother,,Always love your how to, videos brother 🙏👍

[@RevolutionX]

Right on man! Always enjoy your support! Really appreciate the kind words! It really means a lot!🙏🤙👍✌

[@operation11charlieinc]

@@RevolutionX Hooah brother 🙏👍🤙✌

[@ЮрийКовалев-г9х]

Хороший апгрейд, я на Vaterre тоже поставил такие, устойчивость заметно возросла. 👍👍👍👍👍

[@RevolutionX]

I too have these for the Vaterra! Good upgrade indeed. Thanks for watching!

[@RcHobbySteve]

🤟🏽💪🏽💪🏽

[@RevolutionX]

Oh yeah! Catch the running video on Thursday! Thanks for watching man!