5 Personalized Project with the xTool D1 Laser

[@denisereyna32]

I just ordered my xtool d1, can't wait to try it out. Came across this video, and it was very helpful, haven't seen any other videos do silicone materials, and that's what I intend to do. So helpful, Thank you!

[@KimandGarrettmakeit]

Have fun! So glad to hear you decided to purchase

[@susanorona7896]

So glad you introduced us to this tool. Much more affordable than the Glowforge and portable too.

[@KimandGarrettmakeit]

It is! We love the glow forge for a ton of reasons but this is def the next best thing!

[@millie7820]

OMG thank you, thank you thank you for doing the silicone rings, I have been looking for a video for them and here you guys did it, love the tumblers heck I liked them all, love your channel, you guys are a hoot to watch, and I can't for more videos. I have the xtool D1 but I am still learning and now I have you guys to learn with. Thank you for that.

[@luv2craft]

I was on the fence about purchasing this because I can't afford a Glowforge, but after watching this I am definitely going to purchase this, thanks for doing this video, hope you do more.

[@CM7667]

Tempera paint on glass and clear acrylic. Dry moly or cold galvanized compound on stainless steel. The engraving is darker. It can even do mirrors.

[@JKeenam]

Thank you as always!

[@KimandGarrettmakeit]

Our pleasure! Thanks you, J!

[@pammlove]

I got mine this week, just for tumblers. Can't wait to get it put together. Thanks for the inspiration.

[@KimandGarrettmakeit]

WOW!! Hope you enjoy it!

[@Arlisa1913]

I can’t wait to make tumblers 😍

[@vilmasoares1256]

I love you. Im brasilian and i learn a lot from you

[@candacelinville5749]

Totally Terrific Tumblers! Wicked Wood round!! 🤓 So excited for these new projects! You’re giving me the itch for a new machine!! (Thanks guys! 🤦🏼‍♀️) Always look forward Fridays! You Guys ROCKKK!!!!!

[@KimandGarrettmakeit]

Yay! Thank you! We love you Candace!

[@dottyearnhardt9600]

Loved the necklace, so cute!

[@KimandGarrettmakeit]

Thank you!! 😊

[@prptink]

They are all gorgeous. However the stainless steel tumbler is my favorite 😍 thank you for experimenting all these things and sharing with us 😊

[@reneebanbury7066]

Now you made me want one!

[@jhstyleinc7009]

I just placed my order for one. I had been on the fence until I saw your video last week. I have a ThunderLaser coming in May but definitely saw the benefit of a smaller portable machine for smaller runs and the TUMBLERS! Thanks for all of the amazing videos and for making us laugh. You two are the best!

[@anitacalivas8315]

Never seen those tumblers for sale anywhere- you are going to start a trend - they are cool! Love the stamp capabilities- TFS 🐇🥕

[@KimandGarrettmakeit]

Thanks so much!

[@idratherberidingnow]

Havent had much luck with the stainless etching

[@shelleybrim6489]

Ok, now I think I need this!! Thanks for the great video…as usual very informative!

[@KimandGarrettmakeit]

You are so welcome!

[@robinhanff4248]

Pretty cool machine!!

[@KimandGarrettmakeit]

I think so too!

[@TheKatz2u]

Just ordered mine!! Thanks for the vids!!

[@russ4519]

The silicone bands are awesome but the sing was the best ! You can use LA Awesome to clean off your tumblers. It works very well.. thank you for the demo it just father cements that I'm going to get the xtool d1..

[@russ4519]

Sign not sing.. but you can sing with all that bling lol

[@HeatherHunterJ]

Yesssss 🙋‍♀️💘 Happy Friday 😎 I want this machine so bad thank you for giving us more about it 🥳

[@KimandGarrettmakeit]

You are so welcome!

[@BuildDadBuild]

Great video! I love the D....1 Cheers!

[@KimandGarrettmakeit]

Glad you enjoyed it!

[@darrelmiddleton]

Hello, thank you for posting this. Can you put the settings that toy used for the silicon rings?

[@beatrizlatorre9871]

Love your projects!🥰

[@KimandGarrettmakeit]

Glad you like them!

[@yvettehilland5195]

Thanks for showing the mdf cut. Have you seen white sublimationable mdf. I need to cut that. :.)

[@stevenr7003]

I do the tumblers but covering then with painters tape burn the pic. then paint it with a different color let it dry then remove the tape

[@ComgrowOfficial]

Thanks so much for your sharing🥰

[@KimandGarrettmakeit]

Thanks for watching!!

[@vanessajadegallagher7150]

Thank you so much for the video! you didn't mention what laser you got. Was it the 10W, 20W? it was very informative nonetheless! Happy Holidays!

[@brigette3004]

I just bought this at the sale. I’m so excited! I want to make some sign elements. I use my router to cut the circle but want the elements cut with the laser.

[@derrickawarmsley2750]

Soooo cool

[@rickparma]

neverind.. I'm using the 10w at 100p/5s and it is PERFECT

[@pyromania101]

Hey would it be possible for you to tell me what settings you used for your stainless steel charms? I recently got this diode laser the 10-watt version and I can't get anything to mark on stainless steel, thank you

[@KimandGarrettmakeit]

These came with the laser!

[@maryjoking6641]

@@KimandGarrettmakeit I have tried the stainless tag that came with mine and nothing worked. Can you share the power/speed/# of passes you used?

[@macrosqueenfitnessnutritio3399]

I just got my xtool d1 setup. How did you know how to set up the size of the project? Or does the xtool figure that out when it scans the frame? It’s weird to me that this machine didn’t really come with directions as far as how to use it. It had a great tutorial on how to assemble but then I found myself lost after that. I wish it would’ve walked me through at least a first project. Thank you for sharing a few projects. I’ll experiment with mine and hopefully I won’t burn down the house in the process 🤣

[@joannenagano3083]

Do you have an M1? Can you make a video with projects you can make with it? Thanks!

[@susanmckown9946]

Can the xtool engrave on food? Pies, cakes, cookies etc

[@melindamcmillan2329]

Can you engrave on gold plated blanks? Oh I’m excited I’m going to get this tool! Thanks so much

[@ysbelbella6674]

wish you could say what program & settings you used for the projects to help

[@angelehoule8591]

Hi! We just got the same laser machine a few days ago and can't for the life of us engrave on stainless steel pendants. Can you provide the settings you used in XCS?

[@Laayoh]

Nice projects! What was the setting you used for the rubber mat engraving?

[@HerrmDogg]

Can you guys PLEASE do a video cutting some various depths of EVA foam and foam core/foam board/mat board? I really want to buy one of these but can’t find any info on cutting these material with it or if it can and if so, how deep of a piece of each can it cut? Thank you so much in advance!!

[@lovely31bluprint]

This is so fabulous my question is this what do your guys like the best the XTOOL or Glowforge

[@homehobbybuilds2450]

Hi K & G. Would you recommend a small diode laser (xtool d1 pro 10w or 20w) for someone just starting out? I have a small garage shop with very little space and I'm just looking to supplement some income by making little things to sell at craft fairs and locally.

[@KimandGarrettmakeit]

Hey Home and Hobby! If I were just starting out, I would get the xTool D1 Pro 20 watt with the air assist. Because I could cut 1/8" plywood and acrylic at a pretty good speed, but if I would do mainly engraving the 10 watt would work great. Thanks! ~garrett

[@homehobbybuilds2450]

@@KimandGarrettmakeit Thank you for the recommendation. I will be making some cuts so the 20W it is. Keep making the awesome videos. I especially enjoy the market videos and post market videos.

[@TerrapinCreations666]

I just ordered one, and ordered the air assist, but that hasn’t shipped yet. Did you get your air assist yet and get to try that cut?

[@arhodes]

Loved all the projects! Will it be good at doing earrings? ❤‍🔥

[@KimandGarrettmakeit]

Yes, definitely!

[@janetyork585]

Tumblers

[@The_Phantom_Writer]

Wow! Amazing! Does it etch glass? Like a bourbon glass or drinking glass?

[@KimandGarrettmakeit]

Yes it does!

[@mikeledee8786]

Are you still only using lasrbox or lightburn?

[@grazie0316]

Beautiful projects! Do you think this is will cut mirror gold acryllic?

[@KimandGarrettmakeit]

We haven't tried it, but I think you may have to mask it first.

[@cindycardenas5008]

Would this do an 17 by 17 wood sign?

[@KimandGarrettmakeit]

We did a 16"x16" door sign using the xTool.

[@mojo2613]

Did you get the 5W or 10W version? I'm about to buy one... I think I'll go with the 5W and get the 20W diode they're coming out with.

[@WanaBeKenobi]

I teach graphic design at a high school in socal. I'm curious if the xTool would be effective outside in direct sunlight and occasional winds. Thank you.

[@joshuadevita2102]

I'm looking into getting a Xtool D1 but don't have a workshop with window access. Do you need ventilation for wood cutting and glass/stainless steel etching?

[@nancywear9791]

I love it and my favorite is the stamp! I need a business stamp how much you selling them for? ♥️🥰♥️

[@KimandGarrettmakeit]

Depends! email us at [e-mail] and we can make something custom for your business!

[@angeliasmall9250]

I was looking at the link is thus the one with tge rotary attachments? I want to make sure I'm looking at the correct one?

[@bamagirlinflorida]

Do you think this would cut thin metal to make stencils?

[@TiffaniTube622]

Do you use lightburn? Or what system do you use and I wonder if you’d share some of your settings for these projects? Thanks

[@KimandGarrettmakeit]

we use adobe illustrator. we've considered lightburn though

[@TheKatz2u]

Have you engraved baseball bats? Wood and Aluminum.

[@KimandGarrettmakeit]

Hey Katz! I have not yet, but I bought a bat to try it! I will film it.

[@1122americangirl]

Did you have to use Cermark to engrave the pendants?

[@rickparma]

Did you wash offf the tumbler??

[@KimandGarrettmakeit]

Yes!

[@CristyColombo]

Do you prefer the xtool or glowforge for cutting?

[@natashasvetlana]

Is the red on the acrylic a colored acrylic or just the protective layer? Very cool projects :)

[@KimandGarrettmakeit]

It's just red acryllic!

[@SmokedBeauty]

We just ordered an xtool. What air assist did you get?

[@RobertSchoenert]

thanks for the video but I suggest that you handcuff your arms behind your back. the waving of the arms is annoying. the tumbler was my favorite

[@KimandGarrettmakeit]

Thanks for the tip

[@jenniferlandaal]

What kind of D1 watt is this one?

[@rickparma]

what are the settings for the stamp and are you using 5w or 10w

[@timnichols8203]

Love the stamp idea, what rubber mat did you use?

[@KimandGarrettmakeit]

None! yet!

[@javelin13]

Where did you get the rubber for the stamp? Do you have an affiliate link?

[@KimandGarrettmakeit]

All of the material came with the laser kit!

[@leilanastar610]

What did you use as acrylic parameters?

[@lechatbotte.]

Writing backwards and mirrored it look like hobbit writing on the Ring lol

[@KimandGarrettmakeit]

lol i tried to get them to do that!

[@lechatbotte.]

@@KimandGarrettmakeit accidentally on purpose as it were. Good work Mr. Frodo hee hee

[@clarissavillarreal7992]

Hello. Was it with the price. Do you recommend it? Thank you..

[@KimandGarrettmakeit]

Yes, absolutely! If price isn't an option though we recommend the Glowforge

[@clarissavillarreal7992]

Thank you.

[@robbylatham]

What thickness of plywood?

[@KimandGarrettmakeit]

We used 1/8" birch plywood.

[@robbylatham]

@@KimandGarrettmakeit Thank You

[@minnesotamakes]

We've been looking for a dedicated machine for tumblers that won't break the bank. This might be it!

[@KimandGarrettmakeit]

Yes! That is exactly what I was thinking! Thanks MM!

[@nikkinicolechalks5519]

Can this all be done on the glowforge as well?

[@KimandGarrettmakeit]

Yes! This machine is just a bit cheaper

[@michelleplatt8392]

👍🏼❤️🤗

[@julieswartwout7384]

You should try blue hair color, it would be awesome on you. Love your crafts, keep it up,

[@KimandGarrettmakeit]

Thank you, I will!

[@vaotupuauga9937]

What kind of wood ?

[@KimandGarrettmakeit]

MDF

[@bigdr19]

The discount code isn't going through

[@KimandGarrettmakeit]

Oh no, can you explain what's going wrong?

[@bigdr19]

I used your link but no discount was applied had to pay full price but thank you for your video

[@loiserwin4364]

Irish I was a baller???? What does that mean????

[@KimandGarrettmakeit]

I wish I was a baller, get it??

[@loiserwin4364]

@@KimandGarrettmakeit Never heard that phrase before, so I googled it Glad I did.....Thought it meant something else...LOL 🤪🤣🤪🤣🤪🤣