02 Chevy Silverado: Crank No Start Diagnosis step by step Process

[@juniorsierra7123]

I never comment on these videos but I gotta give credit where it’s due and you my man helped me ! Truck randomly shut off on me and I followed all your steps and got it fixed thanks so much!!

[@KITS_Auto_and_Truck_Repair]

@juniorsierra7123 My Pleasure! II'm glad to hear that the video was helpful!

[@csj2640]

This was by far the best starting problem video I’ve seen so far.

[@KITS_Auto_and_Truck_Repair]

Carlos Sanchez Thank you!

[@Sirbuckfilmz]

Absolutely

[@wvbonbonqueen]

Our Suburban starts when cold, but cranks like this vehicle when warm. It is in the garage right now, but... when we get it home again, and if they can't fix it, we have learned a ton of things to check. Thank You.

[@KITS_Auto_and_Truck_Repair]

@wvbonbonqueen My Pleasure!

[@fredklintworth1114]

I really enjoyed how you combined the video with your logical and clear narrative. This is worthy of an auto mechanic's training course.

[@KITS_Auto_and_Truck_Repair]

Fred Klintworth Thank you!

[@gamdslngr1008]

My friend had the EXACT same issue!! You saved a TON of time and money. Very good video!! Well informative. Keep up the great work!

[@KITS_Auto_and_Truck_Repair]

Gamd Slngr Thank you! I'm glad to hear that the video was helpful!

[@dinhas9398]

K Diagnostics - the way you structure the problem solving is better than anything and anybody else, thank you for your time and knowledge!!!

[@KITS_Auto_and_Truck_Repair]

Lidia Santos My Pleasure! Thank you!!

[@Watersedgeministry]

2014 Chevrolet Silverado V6 my son drove the truck after the flash engine light was flashing for two days and then the truck shut off and he had it towed. I went and checked the truck out and ran a scan on the truck showed P305 and P 300. I found cylinder one and cylinder three coil packs bad so I changed all the plugs and the wires also they were fouled and very dirty and looked to be original. I checked to make sure that I was getting spark and I was. I tried to start the truck and it would just turn over with no start. I checked the mass airflow sensor and sprayed it out with mass airflow sensor cleaner. I also change the camshaft positioning sensor. Still no start. Any ideas

[@Watersedgeministry]

2014 Chevrolet Silverado V6 my son drove the truck after the flash engine light was flashing for two days and then the truck shut off and he had it towed. I went and checked the truck out and ran a scan on the truck showed P305 and P 300. I found cylinder one and cylinder three coil packs bad so I changed all the plugs and the wires also they were fouled and very dirty and looked to be original. I checked to make sure that I was getting spark and I was. I tried to start the truck and it would just turn over with no start. I checked the mass airflow sensor and sprayed it out with mass airflow sensor cleaner. I also change the camshaft positioning sensor. Still no start. Any ideas I tried starter fluid still no start

[@bratsnme]

​@@KITS_Auto_and_Truck_Repair❤þ⁷ÿÿ I y t 8 u❤

[@timothybeasley2222]

You are a great teacher and technician. One of the best videos I've seen, your great at explaining your methods of troubleshooting. Keep up the great work you do.

[@KITS_Auto_and_Truck_Repair]

Timothy Beasley My Pleasure! Thank you!

[@armory6305]

Nicely done! You are such a good mechanic and very self explained. Thank you for being part of the community. Please keep up your videos posted, because you are needed in every community, including the world. You ate awesome. Thanks so much for your integrity and such self discipline. Great job my friend. God bless.

[@KITS_Auto_and_Truck_Repair]

@armory6305 Thank you!

[@keithlbishop3993]

Thanks for being the greatest mechanic on you tube... I have the same issue crank no start and I had the same hose leaking on my 07 Silverado classic.. keep doing this.

[@KITS_Auto_and_Truck_Repair]

Keithl Bishop My Pleasure! Thanks!

[@wvbonbonqueen]

What a great person to explain what you are doing and why and how it works. Thank You for this video. I have learned a ton of stuff from this video. The truck isn't doing what ours is, but the video tells us more things to look for, to try to solve its' problem. I had to subscribe after seeing this video. Thank YOU!!!!!

[@KITS_Auto_and_Truck_Repair]

@wvbonbonqueen My Pleasure! and welcome to our youtube community!

[@RoneyLMoore]

I am not a mechanic but you made it easy to understand. Thank you very much young man

[@KITS_Auto_and_Truck_Repair]

@RoneyLMoore My Pleasure! Thanks

[@dalegreenaway5232]

This is the best video by far for these trucks. Caps off to this guy, We'll Done! It's hard to find real mechanics these days!

[@KITS_Auto_and_Truck_Repair]

Dale Greenaway Thank you!

[@KevAF_]

my man, thank you so much. this was easily the best diagnostics video ive seen. a lot of guys leave out what theyve done off camera, or or they will say what they are doing, but not why.. sometimes I over complicate things when it really is just compression fuel spark. hahaha cheers

[@KITS_Auto_and_Truck_Repair]

@KevAF_ Thank you!

[@DarkWater4Eva]

You explained things very well. It was like sitting in a classroom. You mention parts and how they work. Other youtubers jump to straight to things like everyone are experts on here.

[@KITS_Auto_and_Truck_Repair]

DarkWater4Eva Thank you!

[@evaneason6906]

I greatly appreciate your time and work to show the step by step diagnosis.

[@KITS_Auto_and_Truck_Repair]

Evan Eason Thank you!!

[@fcedillo87]

Man god bless you and I hope he gives u more. This video is perfect. Thank you for explaining everything and showing what to do.

[@KITS_Auto_and_Truck_Repair]

@fcedillo87 My Pleasure! Thanks

[@adventures223]

Great step by step instructions you explained everything in exact detail very well done this is a common problem on the 4.3 liter engine moisture gets in the cap and roter and wont start thanks for posting

[@KITS_Auto_and_Truck_Repair]

Adventure S My Pleasure!! Thanks!

[@FranciscoGarcia-nb9nh]

This is the best video congratulations thanks for all information wuaooo a I'm very impressed you are very professional

[@mikem5475]

Great simple diagnostics, I love how you diagnose with simple tools and I love the way you explain things thoroughly. Cool accent too

[@KITS_Auto_and_Truck_Repair]

Mike M Thank you!!

[@superdragon9293]

Got a 2005 Blazer nice lil ride got it for a great price too.... having the same no start issue gonna buy those parts today.....i think you hit the nail on the head.....im sure you just saved me a lot of cash my Brother...Thanx....keep up the good work.

[@KITS_Auto_and_Truck_Repair]

@superdragon9293 My Pleasure! Good Luck with your truck

[@bigcartoonyIIV]

My Silverado is doing the exact same thing. I changed the fuel pump, fuel injectors and spark plugs. It was running like a champ. One morning it started to do this. I pressed the value on the fuel line that feeds the injectors and fuel shot out. SO now I will try this

[@KITS_Auto_and_Truck_Repair]

bigcartoonyIIV Sounds Good! Good Luck with your project!

[@bigcartoonyIIV]

@@KITS_Auto_and_Truck_Repair thanks. I tried it today. and it appears to have been my problem. After spending 1k of unnecessary parts

[@KITS_Auto_and_Truck_Repair]

@@bigcartoonyIIV oh I'm sorry to hear that you spend that much on unnecessary parts! What was the fix!!

[@bigcartoonyIIV]

@@KITS_Auto_and_Truck_Repair it was the distributor cap. I went directly to it since I watched your video. Now the check engine light it one, and has a mild misfire, but Ill go to autozone and let them scan it

[@KITS_Auto_and_Truck_Repair]

@@bigcartoonyIIV sounds good!!

[@EvensDure-y9j]

Excellent video. You took us on an amazing troubleshooting journey. This was certainly A1 training material. Step by step reasoning leading to a very logical conclusion. Thank you for the time and energy you devoted to produce this quality video. I enjoyed the special diagnostic tools used as well. Thank you!

[@KITS_Auto_and_Truck_Repair]

@user-ku3ij9rr6l My Pleasure! I'm glad to hear that the video was helpful!

[@wsnxumalo6707]

I so wish seeing you one day failing to diagnose and fix a presented problem in the vehicle. It seems as if every car problem you always a solution to it, no matter what. Keep it up guy. South Africa

[@KITS_Auto_and_Truck_Repair]

@wsnxumalo6707 Thank you my Friend!

[@wentzm123]

Thank you. I watched this and I went outside and I identified the same problem with my Silverado. Great video.

[@KITS_Auto_and_Truck_Repair]

Wentz Morris My Pleasure!! I'm glad to hear that the was helpful!!

[@jeffreyhildebrand4867]

Excellent logical analysis in troubleshooting the problem. Your explanation of your thought process was very concise, to the point, and easy to understand. Keep up the good work!

[@KITS_Auto_and_Truck_Repair]

@jeffreyhildebrand4867 Thank you!

[@GabrielEbenezer-b2s]

Am growing to become like you 🙏 I have lant alot from you ​@@KITS_Auto_and_Truck_Repair

[@kendrellgriffin6451]

Man good explanation on the diag steps.. best ignition diag I've seen

[@KITS_Auto_and_Truck_Repair]

@kendrellgriffin6451 Thank you!

[@user-zl6qv6wq5l]

Good video you explain really good so the coil don't make spark the problem is the distributor

[@KITS_Auto_and_Truck_Repair]

Thank you!

[@dhenderson2248]

Thank you. You are very good at what you do. Plus you explain the problem along with giving us a good visual of what you were doing, and how to fix the problem. I hope this is the only thing wrong with my 2003 Silverado . Peace and Blessings to You

[@KITS_Auto_and_Truck_Repair]

D Henderson My Pleasure! Thank you!

[@steviemaldonado2237]

how did the project go? was this the fix?

[@brendapalen8335]

Best videos I seen on car mechanics you explain why and you go through details very good

[@KITS_Auto_and_Truck_Repair]

brenda palen Thank you!

[@merteniscool]

This was a great video, showed me step by step how to figure out what was wrong with my 01 Silverado. Thank you so much, it ended up being my coil that I just bought was bad, weird but it does happen. Great video.

[@KITS_Auto_and_Truck_Repair]

Paul Merten Thank you! I'm glad to hear that the video was helpful!

[@AndrewRodriguez-t9z]

Wow a man that knows his shit!! Thanks bro you’re the MAN!!

[@KITS_Auto_and_Truck_Repair]

@user-zs9wh9xr6x Thanks!

[@Angel-f5d5o]

You did a kick ass job of explaining the basics of your Cranking no start issue thanks alot

[@KITS_Auto_and_Truck_Repair]

Angel My Pleasure! Thanks

[@Josemartinez-vv1ps]

Great video brother. Thank you for explaining everything. Step by step. Keep doing the good job.

[@KITS_Auto_and_Truck_Repair]

@Josemartinez-vv1ps My Pleasure! Thanks

[@Jojo-cr1ln]

Love the comprehensive POV as you go experience. Keep em coming

[@KITS_Auto_and_Truck_Repair]

@Jojo-cr1ln Thank you!

[@jrx4436]

Yooooooo! This Video is a Gem . Definitely putting foos out of business.

[@KITS_Auto_and_Truck_Repair]

@jrx4436 Thank you!

[@seancrane8880]

Great technique and explanations in plain english. detailed and shared use of logic and good introduction of concepts and ideas. You earned a subscriber. Those heater hoses are leaking at a spor called a heater hose connectors. when you replace them do not use Dorman units; they blow off.

[@KITS_Auto_and_Truck_Repair]

@seancrane8880 Thank you! and you're right Dorman parts can be bad sometimes!

[@paulcecil3537]

Thank you for a great diagnosis.

[@KITS_Auto_and_Truck_Repair]

@paulcecil3537 My Pleasure!

[@delmertoribio9520]

The best vid I’ve seen with crank no start thanks

[@KITS_Auto_and_Truck_Repair]

@delmertoribio9520 My Pleasure! Thanks

[@SakuraKinomoto-rs2ue]

I dont usually subscribe to non entertainment related channels but you explained it well, an i just became a sub

[@KITS_Auto_and_Truck_Repair]

@SakuraKinomoto-rs2ue Thank you and welcome to our youtube community!

[@adriasihudson157]

Beautifully explained. Thank you.

[@juliobello4561]

I’m having the same issue you gave me good good strategy to get it fix. So far I just order the spark plugs and cables since they’re already old.

[@KITS_Auto_and_Truck_Repair]

julio bello Good luck with your project!

[@juliobello4561]

@@KITS_Auto_and_Truck_Repair thanks I will try to update just in case someone is in my same spot

[@KITS_Auto_and_Truck_Repair]

@@juliobello4561 My Pleasure! Sounds good!

[@dudemajor3395]

Exact same problem but It was my ignition coil thank for the vid 2 years later still great!

[@KITS_Auto_and_Truck_Repair]

@dudemajor3395 My Pleasure!

[@luisfarfan7767]

Awesome class , you Time and Skills are at the Top Level

[@KITS_Auto_and_Truck_Repair]

luis farfan Thank you!

[@achap3604]

Keep up the great work and helping us all learn how to diagnose

[@KITS_Auto_and_Truck_Repair]

A Chap My Pleasure!! Thank you!!

[@xmandough]

Good troubleshooting skills. You gave me a good idea where to troubleshoot next.

[@KITS_Auto_and_Truck_Repair]

@xmandough My Pleasure!

[@rickybob7332]

Very good process to diagnose and fix, every step you follow make sense with the previous and next one without just guessing and it's very easy to learn for us without mechanical experience, congratulations on your work, keep it up!

[@KITS_Auto_and_Truck_Repair]

Rickybob Thank you!!

[@archiepoints2502]

Thank you for explaining how everything works it helped me to understand why my truck doesn’t start

[@KITS_Auto_and_Truck_Repair]

Archie Points My Pleasure!! I'm glad to hear that the video was helpful!!

[@joaoveloso4954]

This guy is the real deal, thanks for sharing step by step and amazing detail. He must be a rocket scientist part time mechanic.

[@KITS_Auto_and_Truck_Repair]

@joaoveloso4954 Thank you!

[@toddwalizer2790]

Really appreciate your in depth diagnosis and fix to the problem.

[@KITS_Auto_and_Truck_Repair]

@toddwalizer2790 Thank you!

[@petermartinez5573]

A great learning experience. Your mechanical knowledge is top notch. Wonderful video, thanks for sharing.

[@KITS_Auto_and_Truck_Repair]

Peter Martinez My Pleasure!! Thanks

[@danhitchcock727]

Amazing that you do most of this with one hand whilst holding the camera with the other.

[@KITS_Auto_and_Truck_Repair]

Dan Hitchcock Thank you!!

[@jeffreymaene6850]

You are one of the best ive seen so far, thank u brother

[@KITS_Auto_and_Truck_Repair]

@jeffreymaene6850 My Pleasure! Thanks

[@jamiel3504]

Excellent video explaining step by step and those distributor caps on the 4.3”s were a design flaw, no rubber gasket to protect moisture from getting in the distributor, these vehicles are notorious for this issue, otherwise the 4.3 is a workhorse if properly maintained.

[@KITS_Auto_and_Truck_Repair]

Jamie L Yes indeed!! Thank you!

[@riverael5034]

Very nice video, I have a 03 silverado and my truck won't start the first time when I started every day, now I have a great ideal to fixed thanks to you good explanation exelente good job thanks 👏👏👍

[@KITS_Auto_and_Truck_Repair]

Rivera El 503 My Pleasure!! I'm glad to hear that the video was helpful!

[@riverael5034]

@@KITS_Auto_and_Truck_Repair very helpful 👌

[@KITS_Auto_and_Truck_Repair]

@@riverael5034 Thank you!!

[@riverael5034]

@@KITS_Auto_and_Truck_Repair tomorrow I work on my truck just one question for you, how do I put the rotor on time

[@KITS_Auto_and_Truck_Repair]

@@riverael5034 make sure the rotor is facing the first cylinder, when the first cylinder is in the compression stroke!!

[@treyslay3974]

That's 4 the step by step I learned something new with the crank senor I know it's some good I now believe my cap and rotary is bad it's been setting in crappy weather after my wreak it still ran but not anymore once it's started I can focus more on the body has 2 function first .Thanks

[@KITS_Auto_and_Truck_Repair]

Trey Slay My Pleasure!!

[@algardner5155]

This is the best work I’ve seen so far

[@KITS_Auto_and_Truck_Repair]

Al Gardner Thank you!

[@yusayres2505]

Really great video with clear explanations of what and why steps are done. Thanks👍🏽

[@KITS_Auto_and_Truck_Repair]

YuSayres My Pleasure!

[@donaldnye2890]

Excellent video! Only thing you may have added was to crank the engine while the cap was off to confirm distributor was rotating.

[@KITS_Auto_and_Truck_Repair]

Donald Nye thanks! yeah that's an excellent point!

[@czahnter1452]

Wouldn’t have any spark whatsoever if it wasn’t turning. Cam sensor signal comes from the pulses from within the distributor

[@franciscocastaneda1997]

Excellent job your explanation is awesome Men, Thanks Brother.

[@KITS_Auto_and_Truck_Repair]

@franciscocastaneda1997 My Pleasure!

[@bryanriewerts2515]

Great video! Very detailed and meticulous. I learned a lot. Thank you!

[@KITS_Auto_and_Truck_Repair]

Bryan Riewerts My Pleasure!! Thanks!!

[@hajrudinkavazovic2231]

My problem is camshaft model in distributor housing under rotor

[@ya_boi_zak5927]

amazing vid bro, this will help me diagnose my friend's truck!

[@KITS_Auto_and_Truck_Repair]

@ya_boi_zak5927 Thanks and good luck with your friend's truck!

[@mikemorse8515]

thank you, your video help me solve my problem two mechanics couldn't solve

[@KITS_Auto_and_Truck_Repair]

mike morse My Pleasure! I'm glad to hear that the video was helpful!

[@txscrewdjdlac]

Great video! This video just fix my truck!

[@KITS_Auto_and_Truck_Repair]

@txscrewdjdlac Thanks I'm glad to hear that the video was helpful!

[@TommyVang-bs6qo]

Wow your video safe me hundred of dollar because the step by step of your instruction...thank you...

[@KITS_Auto_and_Truck_Repair]

@TommyVang-bs6qo My Pleasure! I'm glad to hear that the video was helpful!

[@jimmyherrington-sc4vh]

I love the way you did that step by step keep it up.👀

[@KITS_Auto_and_Truck_Repair]

Jimmy Herrington Thank you!

[@nuttinbetter2do451]

But technically your issue could have just been caused only by the coolant being caked on the inside of the distributor and the D-cap and roller could have still been good since you cleaned off all of the dried couldn't so technically you probably didn't even have to replace the roller and the distributor cap and probably just needed to clean all that dry coolant out. But very nicely done, great job sir. 👏

[@KITS_Auto_and_Truck_Repair]

nuttin better 2 do!?! Thanks! I didn't wanna take a chance! I dislike comebacks and this customer has been happy ever since I did this repair!

[@nuttinbetter2do451]

My no start problem went back to the Ignition 40amp mega fuse... ugh...

[@SuperBrandonmemo35]

Thanks boss.. thank you for the detailed explanation!!

[@KITS_Auto_and_Truck_Repair]

@SuperBrandonmemo35 My Pleasure! Thanks

[@JesusRamirez-ci2le]

Thank you for the video. You are a great teacher and explain the process very well. Where should I look if I’m not getting any spark from the ignition coil?

[@KITS_Auto_and_Truck_Repair]

@JesusRamirez-ci2le make sure the coil is getting power and ground from the computer!

[@JesusRamirez-ci2le]

Thanks it was the ignition control module.

[@jhonherrera2780]

Woow thank you sir my 1996 sierra is doing the same thing I’m going to follow your steps I already ordered the parts I let you know if start God bless

[@KITS_Auto_and_Truck_Repair]

@jhonherrera2780 My Pleasure! Good luck with your vehicle

[@rwagoner56]

Excellent troubleshooting video!

[@KITS_Auto_and_Truck_Repair]

@rwagoner56 Thank you!

[@tomwilson5201]

Great video Sir! Very informative and very well explained. I am a fan.

[@KITS_Auto_and_Truck_Repair]

Tom Wilson Thank you!

[@edwinheredia4305]

That's what you call a very good dynastic.

[@KITS_Auto_and_Truck_Repair]

@edwinheredia4305 Thank you!

[@michaelcolgan3182]

Thanks for info . For sure the heater lines are the problem because I have seen those gm caps looking way dirtier and arced up . Moisture like antifreeze is a killer for sure .

[@KITS_Auto_and_Truck_Repair]

Michael Colgan My Pleasure! Thanks

[@kellismith4329]

They also have known issues with the intake manifold gaskets leaking - those distribuors are garbage, made out of plastic - I am currently going though this in my 4.3 vortec, aftermarket makes a replacement distributor made of aluminum I am gonna try that

[@Joe-bz6yc]

Excellent video. Thorough methodical and well explained. I would however like to raise one point for your viewers if I may. You noted that the distributor cap and rotor did not seem to be worn and you identified moisture inside the cap. Is it possible a new cap and rotor weren't necessary as the moisture could have caused vapor lock inside the distributor cap in which case one could spray wd40 inside the cap dry it out and likely that could have been the problem as well. Just food for thought.In any case Loved your video keep up the good work

[@KITS_Auto_and_Truck_Repair]

Joe Thanks! Good point, but reusing those parts was gonna guarantee a comeback! we replaced them to avoid any potential comeback!

[@TheMervK]

Great explaining my friend!

[@KITS_Auto_and_Truck_Repair]

@TheMervK Thank you!

[@anthonydimanno5419]

Your a very awesome mechanic keep up the great work 👍

[@KITS_Auto_and_Truck_Repair]

Anthony Dimanno Thank you!! I appreciate you!!

[@pappanasty01]

Awesome tutorial on diagnosis to repair!

[@KITS_Auto_and_Truck_Repair]

pappanasty01 Thank you!!

[@shyguy76]

Good video! My 2004 GMC Sierra is doing this at the moment. well explained. Thanks!

[@KITS_Auto_and_Truck_Repair]

shyguy76 My Pleasure!

[@mohammadal-gebaly3046]

Great job , really you deserve one million thump up , thank you very much

[@KITS_Auto_and_Truck_Repair]

Mohammad Al-Gebaly My Pleasure! I appreciate you!

[@danielswatske7770]

Excellent video you explain and show everything in detail I am now a subscriber by the way I have the same truck and I'm having the same problem thank you for the video

[@KITS_Auto_and_Truck_Repair]

Daniel Swatske My Pleasure!! Thanks for subscribing!!

[@jennybaker8753]

Best video and very detailed

[@KITS_Auto_and_Truck_Repair]

@jennybaker8753 Thank you!

[@JustinCaseUrThirsty]

Great video I’m working on mine now I think this is going to help me a lot.

[@KITS_Auto_and_Truck_Repair]

JustinCaseUrThirsty Thank you!

[@alangaudry724]

Again thank you for sharing your knowledge. Just don't lose the little screws to that rotor.

[@KITS_Auto_and_Truck_Repair]

Alan Gaudry My Pleasure!!

[@jaibanGeneralmaintenance]

A great and useful video, but I was hoping that you would tell us about the startet tool how to get them or link

[@KITS_Auto_and_Truck_Repair]

jaiban General maintenance Thanks! I got this tool from AESWAVE.COM

[@tomhilmer9554]

Great job in detail and very good described problems

[@KITS_Auto_and_Truck_Repair]

Tom Hilmer Thank you!

[@benjaminhamm6115]

Great video my friend! Explained very well and what caused the distrubiter cap and rotor to go!

[@KITS_Auto_and_Truck_Repair]

@benjaminhamm6115 Thank you!

[@algardner5155]

You saved me some time and money . I have the same issue . Where you located.I would come to your shop

[@KITS_Auto_and_Truck_Repair]

Al Gardner Thank you! I'm located in Dickerson MD, you can email me at [e-mail] for shop info!

[@jStrikesMechanical]

Good work. Really helps having the scan toon

[@KITS_Auto_and_Truck_Repair]

jStrikes Mechanical Yes! Thank you!

[@SuperLospotros]

Really good explanation, you are the best

[@KITS_Auto_and_Truck_Repair]

SuperLospotros Thank you!!

[@sulemanhabib1743]

Old school style, Waw the car is fixed, K Diagnostic great thanks you. Habib Auto

[@KITS_Auto_and_Truck_Repair]

Suleman Habib My Pleasure bro! Thank you

[@41663]

Thank you well done. Without cussin once. Thats good. I would have been the whole time.

[@KITS_Auto_and_Truck_Repair]

Dave Toelkes My Pleasure!!

[@Sirbuckfilmz]

This was good and detailed. Definitely subscribing

[@KITS_Auto_and_Truck_Repair]

@Sirbuckfilmz Thank you and welcome to our youtube community

[@richardjeanpierre9265]

Man you are the best on you tube

[@KITS_Auto_and_Truck_Repair]

@richardjeanpierre9265 Thank you!

[@jischwab]

Great video! Thank you!

[@KITS_Auto_and_Truck_Repair]

@jischwab My Pleasure!!

[@dirkballinger2983]

Good job man u. Did great at explaining

[@KITS_Auto_and_Truck_Repair]

Dirk Ballinger Thank you!

[@edwardhoyle3629]

Good teaching well explained at a good pace.

[@KITS_Auto_and_Truck_Repair]

Edward Hoyle Thank you!!

[@JTWorld210]

Hopefully it’s my rotor that’s it already changed out new Rotor cap.. gonna try the rotor next 🤘🏼🙏🏼👏🏼

[@KITS_Auto_and_Truck_Repair]

@JTWorld210 Good Luck!

[@kaylamarie8309]

Another fantastic diag/repair video Sir 😃

[@KITS_Auto_and_Truck_Repair]

Kayla Marie Thank you!!

[@smid2550]

That's a good job, and I enjoyed watching your methods. One question: Why didn't you try checking the distributor cap with a meter?

[@KITS_Auto_and_Truck_Repair]

@smid2550 Thanks! checking the cap with a meter can be misleadingg sometimes because the reading can be affected by heat under the hood!

[@raiseacoldone]

I learn alot from your videos thank you

[@KITS_Auto_and_Truck_Repair]

Abraham Kentton My Pleasure! I'm glad to hear that!

[@madetohelpyou]

Awesome video. Thanks for taking your time

[@KITS_Auto_and_Truck_Repair]

@avery214j My Pleasure!

[@M.D.Jones87]

Awesome job troubleshooting this bro

[@KITS_Auto_and_Truck_Repair]

Matthew Jones Thank you!!