Klein Machining LMG Meltdown

Howdy everyone, today we will be melting the Klein Machining LMG Upper!
Check them out at: smallteamsuppl...
Thank you to optics planet for the ammunition! Check them out at: alnk.to/7M8plGz
Use code GWEBB to get 7% off your entire purchase!
alnk.to/7M8plGz
Thank you to Center Target Firearms and Indoor Range for the FA lower! Check them out at: www.shootcente...
Check out their KZbin at: / @centertargetfirearms
Ammunition used in todays video was Winchester 62Gr
Would you like to donate to see your favorite upper melted? Use these links and leave your name to have it featured on the next sponsored meltdown!
linktr.ee/gold...
account.venmo....
www.paypal.com...
/ goldenwebb
Thanks for Viewing! Like and Subscribe For More Gun, Knife and Light Reviews!
God Bless The USA!
Special Thank You to OpticsPlanet.com for sponsoring the ammo for this video! Check them out at: www.OpticsPlanet.com
Use code "GWEBB" for 7% off your entire OpticsPlanet.com order!!
Follow Us On Social Media:
linktr.ee/gold...
Facebook : / goldenwebb-38486550537...
Instagram : / goldenwebb_yt
Check out some of our Teespring items at: / @goldenwebb
Interested in us reviewing your products? Send all inquiries to: [e-mail]
Like to donate to our patreon? Check us out at www.patreon.com/GoldenWebb
Check Out My Most Popular Uploads!
MY NEW 2020 COLT PYTHON IS JUNK!!!!!!!!
bit.ly/3ePEiKH
Update On Mine And Hickok45’s Defective Colt Python: Possible Human Error???
bit.ly/2VAjEqe
Sig P365 Vs Sig P938
• Sig P365 Vs Sig P938
Colt Quietly Recalls 100 New 2020 Pythons From Distributors
bit.ly/3cMC9O0
Colt Answers What Was Wrong With My Python: Is It Fixable?
bit.ly/2VFlfLP
Back To Colt It Goes! Second Time Is Not The Charm For The 2020 Colt Python...
bit.ly/2S2pAWY
Colt Comes Forward With Python Problems And Explains What Is Really Happening
bit.ly/2S6qlOZ
Glock 45 Vs Glock 19X
• Glock 45 Vs Glock 19X
Diablo 12 Gauge Double Barreled Blackpowder Shotgun Range Review
• Diablo 12 Gauge Double...
Please don't forget to LIKE, COMMENT AND SHARE Our Videos and SUBSCRIBE to the Channel: / goldenwebb
#GoldenWebb
John 3:16 “For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.”
Philippians 4:13 “I can do all things through Christ which strengtheneth me.”
Matthew 5:9 “Blessed are the peacemakers: for they shall be called the children of God.”
Proverbs 15:1 “A soft answer turns away wrath, But a harsh word stirs up anger.”
John 15:13 “Greater love hath no man than this, that a man lay down his life for his friends.”
Romans 13:4 “For he is the minister of God to thee for good. But if thou do that which is evil, be afraid; for he beareth not the sword in vain: for he is the minister of God, a revenger to execute wrath upon him that doeth evil.”
Disclaimer: All firearms in every video have been safety checked before filming. All videos are performed by trained firearms professionals for educational and entertainment purposes on a secluded and certified range. We do not sell firearms of any type. We emphasize firearms safety and hold it to the highest standard possible. Do not replicate anything shown in videos at home without a trained professional or at a safe range to do so. Firearms are not a toy and should be treated with the highest respect possible.
WE DO NOT SELL FIREARMS OR FIREARMS ACCESSORIES. WE DO NOT SELL FIREARMS!!!!
Jacob Meyers with Red White and Blue Apparel is sending us a KAC SR-15 14.5 to Melt!

[@GoldenWebb]

If any manufacturer has a weapon you would like seen reviewed or a tested in a meltdown, tag them in the comments or contact us!

[@GoldenWebb]

Sorry, I don’t know why KZbin had my comments turned off.

[@timewave02012]

I saw it on a bunch of channels yesterday. Big tech shenanigans.

[@cobyadams3]

Let me come hunt man

[@OtacoW33b68]

Thought you were pulling an illuminaguhtii

[@joeclaridy]

KZbin disables comments too? I thought that was only done by the channel owner.

[@timewave02012]

@@joeclaridy What's to stop them? KZbin is the real "channel owner". "Content creators" retain some level of copyright over their works, but KZbin has no obligation to recommend it, run or not run ads, allow comments, censor or not censor comments, etc. They recently revised their firearm policy to further restrict responsible educational content, while continuing to allow the glorification of violence in movies and music.

[@speedKGDM]

When Brandon gets his ak 50 finished and “on the market” it would be pretty cool to see a melt down and durability test…

[@GoldenWebb]

Lord God🤣🤣

😂🤦🏻‍♂️

[@thatguy.namedmitch]

I’d like to see y’all do a meltdown of the Recce IAR/LMG upper by Red Right Hand, LLC.

[@GoldenWebb]

They are supposed to send us one when they get done with their personal testing

[@Mike-yy4ll]

Yes, and version with FINS.

[@ryanboyd362]

@@GoldenWebbhows that coming along? Cant wait to see how the recce does

[@nunyurbyznes7611]

How about Red Right Hand uppers? They are made to shoot full auto fire! They are built around controlling heat in all the components! It would be very interesting to see how well they actually do in continuous fire.

[@DJTheMetalheadMercenary]

Nice! Definitely looks like the Aero BCG is the major culprit of the malfunctions here with the ejector and extractor claw, probably want to run a bit of a heavier buffer too.

[@willpatterson5946]

Try that upper with a KAK Kspec BCG. It’s got dual ejectors. That was textbook ejector problem. Having had this problem happen multiple times with various BCGs on machine guns. Dual ejectors is a must on that. Not strictly necessary on semi autos but on machine guns absolutely

[@GoldenWebb]

We will have one coming up soon with the KAK BCG

[@willpatterson5946]

@@GoldenWebb can’t wait. I’m a huge fan of your melt downs! Maybe reach out to KAK and see if they’ll send out a few of those Kspec BCGs for future testing. Also, I’d love to see a meltdown on a griffin MK2 upper if possible!

[@theHSPCproject]

the m240 has a single ejector

[@willpatterson5946]

@@theHSPCproject with a significantly stronger spring that doesn’t get the same heat and endurance testing that AR bolts do. They’re used in a specific cadence to protect themselves for longevity and durability. Plus, being an open bolt machinegun allows the bolt face to cool when the variance is broken whereas an AR bolt stays directly locked with the heat source

[@ragnarok5056]

By the looks of it, wash out of the gasport in the barrel, witch then again comes down to barrel material used here is not sufficient quality. Awsome video 🔥🔥🤘🤘🤘

[@shootinbruin3614]

Pushing the gas port forward 2 or 3 inches will probably help with the extraction issues (in addition to a better bolt and a heavier buffer). A 24" barrel makes an extended gas system possible

[@mtnbound2764]

good point, its got a ton of dwell time with the longer barrel after the gas port

[@peachfuds]

Would love to see a Red Right Hand upper compared to this.

[@vulgar_potato4992]

I feel a lot of these issues are mag and BCG related. A fuck ton of double feeds causing stoppages

[@GoldenWebb]

Mags run fine. All in all these mags might have 4 loads in them. The gun got severely overgassed which is what caused the failures in my option

[@donwyoming1936]

Polymer mags will double feed & fail to lock the bolt open when the rifle gets hot. About 400rds, and Polymer mags really start to have issues.

[@donwyoming1936]

When we tested Polymer mags in the military back in the day, they really don't do well once the rifles got hot. They get soft. Rounds start double feeding. They won't hold the bolt back when empty. I have no idea why they adopted the things. I would stick to USGI aluminum (with Magpul follower) and HK High Reliability steel mags for these tests.

[@latenightlive2982]

Pmags and Thermolds are 2 totally different animals. I had a 20rnd thermold and that thing sucked. The Pmags have never let me down and I've had the same ones for 10 years

[@Radvous]

Not all polymer magazines are the same, PMAGS by Magpul are top notch and do not suffer from heat. They are good to go.

[@DerWaidmann_]

Fightlite MCR next

[@GoldenWebb]

We’ve reached out to to, haven’t heard anything yet

[@sn1perdude7110]

if you do a red right hand upper i would like to see a kak k spec bolt being used, this seems like an ejection problem and possible a tiny bit of a gas problem. the rrh upper uses an adjustable gas block to reduce the rof and a straight gas tube that will last much longer than a typical ar15 gas tube. on paper it will not fail before you run out of table space for ammo, but id love to know how long it lasts. just a thought! i love watching these thanks

[@nataliedeyton6829]

That’s a bad ass upper NGL

[@mtnbound2764]

ehhhh kinda.. RRH is better.

[@paulsciria8921]

The Geissele went more.

[@Kawiracer_435]

I would love to see you do a test with the FightLite, MCR060 they are awesome

[@mk760fan3]

That would probably run for days if you used a rifle length buffer tube and a hydraulic buffer.

[@rnginu59]

So they need to do some better sourcing and get better bcg's 😮

[@lchgamer5598]

this much of a M4a1 AR with a barrel of MG5

[@LowProOperator]

I would really like to take a PSA jackal and throw in a 20 inch heavy barrel and do an LMG style set up. I’m not a diehard gas piston fan. Find them to be slightly less accurate and just a hair more recoil than your typical AR system. That being said, I’m not trying to cause an argument I think piston set ups are great firearms. To each their own. But one thing I will say is is the weakest link in the AR platform with sustained fire like this is the gas tube. Now I know it’s designed to pop the gas before it pops a barrel With a gas piston set up or hack a roller delayed set up that would be best that if you’re going to call something an LMG. I’m currently building an AR RPK because I think it’s dope but I know it’s limitations. Now with this HBAR set up I think it would be a phenomenal AR RPK.

[@stanton7847]

Although I appreciate the idea of trying to maximize the capabilities of the AR-15 platform, its especially poorly suited for this role.

[@joeclaridy]

To me this is a step below the M249 which is a belt fed AR-15 plus a few more features. The AR-15 with a few modifications can do the squad support role.

[@chrischiampo7647]

😊😎😀👍🏼

[@KR-fy3ls]

He was being nice but to market something as an LMG then have it fail after so few rounds is pathetic.

[@GoldenWebb]

It did fail prematurely soon

[@cldsixthdl9990]

👍☝️

[@Wmbhill]

🇺🇸

[@StarsiegeMercenaries]

Slow.Down

[@charlesmullins3238]

So that’s the man behind the Webb…lol..good to meet/see him so I’m gonna throw a hand out 🫲..found out why I was havin pressure in my waypoint and I wasn’t gettin it good n dry after a hard scrub with lotta hoppes…upper end of 50gr powder in those 6.5prc and like you I’ve got the lord on my side thankfully…y’all’s shop open Saturday.? I think this may be the weekend I come down from Floyd co and say howdy…if theys anything you boys need or I can help with don’t hesitate man…this world ps goin to hell but I’m gonna take care of mine till the end either way..👊🏻🫡🇺🇸sheriff matt Dillon…😉

[@billbrueckner8906]

For the life of me I can’t imagine the purpose this weapon serves outside the military

[@timewave02012]

You witnessed one of its non-military uses if you watched the video.

[@sluttybutt]

This weapon isn't used by any military. This is a novelty made specifically to push the envelope of this particular platform and experiment with certain configurations and specifications to test its capabilities. Stop hand-wringing and approaching from a position of bad faith and ignorance.

[@andys8718]

Getting illegal immigrants to stay off of your front lawn

[@DonVoyage6948]

To fight the government..

[@mtnbound2764]

then i guess its not for you. thats ok though :)

[@sluttybutt]

Question: do you test fire and change the buffer weight for each upper or do you run them all using the same buffer? This one looks pretty heavily gassed. Edit: well shit as soon as I posted this you got to the part of the video where you answered it lol

[@f.wallace8969]

lol, I was about to give you a time stamp but then I saw the rest of your comment.

[@GoldenWebb]

Hahaha