KLX300SM Gear Indicator Install & Set Up

[@SALTxTHExWOUND]

I’ve been following the KLX300/KLX300SM Facebook group for some time now and I’ve come to realize that this was a common question by many klx owners. I finally got around to filming the video so hopefully it helps some of you out there! Thanks for watching ✌🏻😁

[@LayneC10]

Thanks! Been looking forward to this since our conversation Thursday

[@henrynaguit6690]

Thank you for sharing. Question: in your video at 0:42, you mentioned about tapping wires. May I know which of those wires? Any information given is greatly appreciated

[@JC-lc8vz]

Where did you buy the indicator and what model /part number

[@brians6749]

Thanks for the video. I got mine all set up about a month ago. I used the “tips” from others on which wire to tap into. I chose the green/yellow (third pin out) from ecu. Everything works as it should, but my battery drains overnight if I don’t keep it on trickle. I will definitely be changing the wire connection tonight. Thanks again.

[@SALTxTHExWOUND]

Glad it helped

[@Myrussell67]

Thanks for the video. I just installed my gear indicator and with your vid it went super smooth. Works great. Thanks

[@iOSNeil]

After stalling THREE times, in slow moving traffic, with wife on the back, finally realising I was in 2nd and trying to hold the bike upright due to wife shaking uncontrollably with laughter (🤮🤬) I’ve just put one on my K5 GSXR. Have to say, I absolutely love it! Never felt such a noob in all my life that day 🤦🏻‍♂️🤣

[@redtreepython]

But at the light it will not show the gear i, ones u apply the clutch the screen only shows the dash

[@Szlejer]

Used the Healtech indicator for 20k+ miles, summer and winter, never had a problem.

[@SALTxTHExWOUND]

Awesome to hear! I've always heard great things about them, I know there's a lot of knock offs that are significantly cheaper but I'd rather go with something tried and trusted. Thanks for watching bro!

[@SerratedAMG]

Your intros sound like beginning of rammstein song called Angst, lol. Thanks for the video, this helped out at TON finding that wire to splice. And to program it.

[@davidelizabeth4933]

Clean install. Nicely done. 👌 ❤❤❤

[@SALTxTHExWOUND]

Thank you both 😁

[@henrynaguit6690]

Thank you for sharing. Question: in your video at 0:42, you mentioned about tapping wires. May I know which of those wires? Any information given is greatly appreciated.

[@ColeShowalter]

Love you videos, thanks so much

[@SALTxTHExWOUND]

Thanks for watching!

[@GrotrianSeiler]

Great video. Great mod. What levers did you go with?

[@iMotoTactic00L]

Cool! Does it work on KLX 230Sm?

[@SALTxTHExWOUND]

I’m not 100% sure tbh

[@liquidmetal4050]

Great video, very informative. I will be doing this on my SM in the future.

[@SALTxTHExWOUND]

Thanks for watching! Glad I can help others 😁👊🏻

[@herbf2700]

I love mine. 2024 KLX300 -- Installation was a breeze. The only down side is its so visible that the LCD dash looks like crap.

[@redtreepython]

Greetings to you i have the same bike just 2023 and went ahead and bought the indicator from the link you mentioned and installed it pretty fast thanks to your video, my problem is that when i hold the clutch like for example at the light then it does not show the gear only when im driving it shows as soon as i hold the clutch it just shows that dash , is this normal ? Or i did something wrong ?

[@SALTxTHExWOUND]

No, you installed it correctly. the bike has to be in gear with the clutch out for it to register the gear

[@demon817]

Hi, see the connector you used on the head light which wire on the gear indicator did you tap into on the head light and what color was that one on the connector. Understand the rear connection thanks.

[@JohnnyLochness]

noticed in some of your videos you have 2inch crg mirrors and in others you have 3inch. looking to get rid of stock mirrors, 2 inch looks better but was it really that bad in terms of vision that you needed to up it to the 3 inch? just wondering, thanks.

[@SALTxTHExWOUND]

2” looks great and does a decent job if you’re pretty good about head checking. 3” gives you more view and is closer to an OEM mirror size

[@ChaseJasperDown]

That’s a great explanation. Thanks for sharing!

[@SALTxTHExWOUND]

Thanks for watching bro!

[@401BAM]

Did you install a diode kit for your LED blinkers?

[@klx300sm8]

Appreciate the video. I get a check engine light when installing, any suggestions? Also, did you have to connect the short red and black wire to another ground/power wire behind the headlight?? Maybe that is my problem.

[@tootjr]

Great Job Guy !🤘

[@SALTxTHExWOUND]

Thanks bro!

[@muddyboots-mac]

nice content, will it fit for KLX150? Thanks

[@ABS-yc8vh]

Hi thnx for the video. I'm currently installing an indicator on my kxf 250...is the green/white wire you tap into your positive from the gear position switch?

[@makjak111]

Hey man might not be up to date on your videos did you end up tuning the bike when you got the exhaust? The Bike seems to run a bit lean from the factory when looking at the spark plug

[@judge831]

Looks like the green & black wire is too short on mine to reach back to the ECU? Did you have that problem?

[@judge831]

I got the GPX-K02 which Healtech's website said is compatible with the KLX300, so I don't know why it's so short. It's unfortunate that the supplied instructions don't even mention the KLX.

[@SALTxTHExWOUND]

No mine had more than enough length, I actually tied up some extra wire into the bike itself

[@DanielVazquez]

what wheels are those (the ones with the green line)?

[@SALTxTHExWOUND]

It’s just hi viz yellow rim tape 👍🏻

[@kaym7495]

I've got one on my vt750. It's so good

[@SALTxTHExWOUND]

HealTech makes a great product. Once you’ve ridden bikes with gear indicators, going to one that doesn’t have one it just seems silly to me. A cheap fix 👍🏻

[@gutterghosts]

Does this work for the 2021 KLX300SM???!!!! and where can one order in Canada??

[@kdkearns22]

Hi how do you know which gear indicator to buy I have the exact same bike but it's a 2022

[@NHlocal]

Suicidal squirrel!!! 😳😂🤣 Thanks for sharing and be safe! 😃👍❤️🏍 Randy

[@SALTxTHExWOUND]

😂😂 sometimes I think they’re all suicidal 🤣

[@NHlocal]

@@SALTxTHExWOUND Agreed! 😜🤣

[@MiamiJato]

I've seen alot of these, do they work on my DRZ 400SM, also does it recognize when you shift without clutch?, thanks Salt....

[@s2hvisuals439]

Doing this Void warranty? Fire video 🔥 In-depth Step by step 💪🏼

[@SALTxTHExWOUND]

No, not that I'm aware of.

[@TheDogDad]

What your 6 month warranty on a $6k bike? Doubt it and even if it does, oh well!. It's a super cheap bike.

[@lazyenword]

I think Kawasaki saw your videos because they made the 2023 klx300 the same color yellow, only instead of black number plate above headlight it's yellow.

[@rhardy6721]

Which HealTech gear indicator model is this? And will it work on a 2022 klx 230?

[@BJJNINJA215]

Every color is out of stock!😳

[@SALTxTHExWOUND]

Seriously! I checked last night and all but white was in stock! Jesus I need 10% of all sales lmaooo

[@JoseRivera-tj1nh]

They’re back in stock as of last night

[@gregemery1571]

Very helpful, thank you.

[@SALTxTHExWOUND]

Glad it was helpful!

[@SmokinZen]

Will it work on KLX300

[@SALTxTHExWOUND]

I would think so, they're practically identical. does it have a speedo that looks like the sumo?

[@SmokinZen]

@@SALTxTHExWOUND exactly except a brown lighting instead of blue

[@Txhauler85]

What pipe?

[@brian7189]

What mirror is that?

[@SALTxTHExWOUND]

CRG 2” blindside 👍🏻

[@johnfarage]

Too confusing

[@SALTxTHExWOUND]

It takes about 15 minutes

[@victorgodoy6224]

Bro I bought one and I can not set it up it it only has one plug and no green wire.?and It only has a ECU connection?

[@beekeeperbrad6251]

Thank you

[@SALTxTHExWOUND]

You're welcome