Forging a Knife from Calligraphy Pens and Ball Bearings : Unbelievable Transformation!

Рет қаралды 147,147

Күн бұрын

Пікірлер: 62

@gwcstudio 2 ай бұрын

Dont bother with whiteout. It's the titanium dioxide pigment that keeps the metal from sticking. Use Killz spray paint, it costs a lot less.

@George-tz1cv 3 ай бұрын

That one might just be my favorite. Great knife!

@paradiswest4395 2 ай бұрын

Simple, classy, clean. Well done sir. Excellent blade profile and handle shape.

@ghosstracing 2 ай бұрын

The way he free handed that grind 😮

@charitybrown4274 Ай бұрын

Beautiful Knife!! Great Work 👍

@JamesMPogue 2 ай бұрын

Such a beautiful handmade knife, keep up the good work.

@charleyhustle503 2 ай бұрын

This guy is a master with the 4inch grinder

@BUZZKILL59able 2 ай бұрын

Beautiful work as usual! Always love watching you work!

@chitoflores9607 2 ай бұрын

NGL, I had high expectations for the Damascus pattern gjven the raw materials, ....but it just went all pfffftttt at the end.

@GabbrieleFumetti 3 ай бұрын

Bell coltello veramente una lima armoniosa Grazie 🤩

@vittoriocesareprimi1111 3 ай бұрын

Complimenti! ✨ Veramente veramente bello 👍🏻

@Karl_Uklarovich 3 ай бұрын

брутальный тесачина🔥👍👍👍

@MASI_forging 2 ай бұрын

Great video 👏👏

@KpyTpy 2 ай бұрын

Интересный рисунок получился . Мне кажется если его протравить в кофе он был бы более контрастным !

@paulhaggard3618 2 ай бұрын

Beautiful knife

@andrewhull7296 2 ай бұрын

Damn well done!

@Manufacturingzone-c1h 2 ай бұрын

Nice video ❤

@darrengriffiths2372 2 ай бұрын

Amazing work i lv it wow👍👏👏👌

@mikeree7375 3 ай бұрын

Love that handle

@michaelscheck6047 2 ай бұрын

Love the no guard on the grinder.

@TheLordofthewolf 2 ай бұрын

0:21 Vitores Mendez knows how to make knives? Great! 😂😂

@codylamp6814 2 ай бұрын

Don’t forget the mints!

@Driftwood740EvSide 3 ай бұрын

very skilled professional, been watching a little while, my first comment, must stay in the algorithm

@mohammadparsa5765 2 ай бұрын

Great

@DavidGlaum 3 ай бұрын

How long did it take you to actually make this night it is fantastic?

@bearshield7138 2 ай бұрын

nice job

@NLSkooch Ай бұрын

Nice knife. But a deeper etch on the blade would have looked great.

@moondog4313 2 ай бұрын

You should take brass shavings, copper shavings and metal shavings mix them together and make a knife

@Met_MrxWrx 2 ай бұрын

Does not work like that (copper and brass ist Metal aswell:D you mean Steel)

@moondog4313 2 ай бұрын

@@Met_MrxWrx like one knife made of brass and steel, and another one of Copper and steel

@Met_MrxWrx 2 ай бұрын

@@moondog4313 that Works yeah, search for cu-mai knife, but it will not Work with shavings

@leetucker9938 3 ай бұрын

wow

@MrWarrcan 2 ай бұрын

Край лезвия выглядит словно не скован цельным, а значит хрупкий. Слои стали не сварены, внутри похоже пустоты будут.

@olegkhaustov4798 15 күн бұрын

Этот нож сделан наподобие сэндвича, как японская катана, по краям более мягкая сталь а внутри дамасская сталь высокой твердости. Кузнец же перья , стальную стружку внутрь контейнера из мягкой стали запечатал, потом на прессе раскатал а затем болгаркой срезал концы заготовки, верхнюю и нижнюю части но оставил боковые пластины. Вот и получился сэндвич после того как он все разогрел и молотом сковал.

@robertyoung5748 2 күн бұрын

I like that you didn't make another utube chef knife and I like the handle need to soak a little longer in the cloride but overall great blade.

@bernjwallace6877 2 ай бұрын

Really good knife. I think it would’ve looked even better if you soaked it in code to bring out the pattern more. Overall very nice knife though.

@Skilledworker-t 2 ай бұрын

You should cover the light when welding, it's a bit dazzling to my eyes. Thanks.

@Survivalguy 2 ай бұрын

No offence, but where is all the pattern? For what you put in there you would think it would be full of crazy shit.

@johnbryce8267 2 ай бұрын

does anyone ever make a knife from all the cutoff's? even if it were a san mai so the center is just one metal and consistant,.. could be just about anything else for the outside layers...

@dronetalia 3 ай бұрын

Yahşi bıçak

@Lunas2525 2 ай бұрын

Depending on those nibs titanium or iridium could have been part of the composition. Most of them would be stainless.

@zenonherrera4366 2 ай бұрын

How many channels does this guy have???

@captassassin5680 2 ай бұрын

What’s with the bucket of dirt after quenching?!!!

@dustinhelmick8619 2 ай бұрын

So forging a flat bar then cutting out a knife with a grinder? Got it.

@nateowens6808 Ай бұрын

That’s not forging…that’s cutting

@crash7951 2 ай бұрын

Maestro sei bravo nel tuo lavoro ma il fatto di non usare la protezione alla smerigliatrice non gioca a tuo favore 🤨🤷

@rexholder2254 2 ай бұрын

Didn't see the Damascus pattern.

@celticphox 2 ай бұрын

@rexholdwr2254 Did you accidentally miss the knife coming out of the ferric chloride at 9:19, the quick scrub at 9:29, and 12:58-13:01 in his hand. Dude's not necessarily working ABS standards; I knocked a crap-tonne off with an angle grinder! If he's happy, I guess we need to be.

@montzilla 2 ай бұрын

no mechanical connection to the handle? 🥴

@mattheweggers8345 2 ай бұрын

He didn't forge a knife he cut a knife with a grinder

@DEEZ-v5m 2 ай бұрын

Dude made a beautiful pattern billet, but another cut and grind to shape. Really? Anyone can cut a piece of metal and grind it to a shape.

@nickzhaosun 2 ай бұрын

Respectfully, you didn't forge a knife. You forged a billet and cut a knife out of that. Different skill set.

@pritampaswanyt 2 ай бұрын

6:32 I know you're pro at your work, but can you not do that, that's dangerously terrifying. Your hand is quite close to the wheel. Use a small cutting wheel(4inch) so that you can attach the guard, or just make a guard for big cutting wheel like this. I Hope You Read My Comment Positively And Work Safely.